To assist Design for Safety Professional to carry out following duties:

• Recognise the importance of design for safety and health of a construction project to eliminate or mitigate such risks throughout the different life cycle of a building and structure
• Recognise, and advise stakeholders on, the duties and responsibilities of DfS Professionals in accordance with relevant legal requirements and WSH (DfS) Regulations
• Prepare for DfS review meetings in accordance with WSH (DfS) regulations
• Coordinate DfS review meetings for consideration of safety and health risks during different phases in the lifecycle of a building and structure
• Apply hazard identification tools and risk assessment for DfS review meetings in accordance with organisational procedures
• Establish types of safety and health records to be kept in the DfS Register in accordance with WSH(DfS) regulations
• Coordinate the flow of relevant information to stakeholders throughout the construction project
• Familiar with Design for Safety Guidelines of MOM
• Able to work with consultant team to carry out Design for Safety Review Meetings / Workshops in accordance to GUIDE 1, GUIDE 2 and GUIDE 3 according to MOM regulations
• Prepare and Maintain Design Risk Registers
• Prepare Design Risk Register documentation and handed over to relevant parties

· Ability to resolve machining problems appearing on parts by analysing the regular test cuts usually provided with the Maintenance literature.

· Ability to resolve machine service , Maintenance tasks of the complex nature without Technical assistance.

· Ability to resolve application problems of a normal complexity by occasionally seeking the assistance from experienced Application Engineer.

· Ability to recommend solutions to customers.

· Provide training to customers when required.

· May supervise a less experienced service on a task related to the preventive maintenance, repair and/or installation of Machine.

· Ability to perform on site audit and provide support for customer sale.

· Customer orientated and self-driven.

· Strong and dynamic leader with active listening, understanding and problem solving skills.

· Analytical approach to complex problems, ability to prioritize, reliable, and independent

JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical Installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical Installation, testing and commissioning

JOB REQUIREMENT

• Bachelor's degree in Electrical & Electronic engineering.
• Minimum 3 years work experience in process plants or in the water/wastewater industry, with good knowledge in electrical desgin of water and/or wastewater treatment plants.
• Familiarity with AutoCAD, Navisworks.

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

We are a design and build contractor in the construction industry

We also provide project management services in the construction industry.

Roles and Responsibility:

1. To assist project manager in managing construction projects in industrial /residential sectors

2. To assist project manager in managing client ,consultants , subcontractors and peers in project delivery context

3. To be responsible for progress reporting

Skill & Certification

5. Attained Degree or diploma is construction disciplines

6. Attained Safety Course for project manager certificate

7. Proficient in project Microsoft project

8. Proficient in autocad software

9. Min 1 to 3 years experience in construction industry.

About the Role

We are seeking a full-stack engineer to join our fast-growing fintech startup. You will work closely with the leadership team to define the product and technology direction, with ample opportunities for growth and flexibility.

You Will...

• Own ideas from inception to execution.
• Work directly with the founders to define the product and engineering roadmap.
• Design and implement backend functionality, architecture, and more. You will work independently, be self-directed, and deliver innovative solutions.
• Pave the way for the company to scale to millions of transactions and power unique digital commerce flows.

Skills We Would Love to See

• Design, develop, and maintain web backend applications using TypeScript, Kotlin, AWS Lambda, microservices frameworks, and PostgreSQL.
• Implement automated continuous integration and deployment (CI/CD) pipelines using tools such as GitHub CI, CircleCI, and AWS CDK for infrastructure as code (IaC).
• Design and implement automated testing using frameworks such as Jest and Playwright.
• Develop and maintain APIs using frameworks like Express and Fastify with OpenAPI specifications for external systems, such as online e-commerce platforms or alternate payment methods.
• Develop and maintain integrations with external systems, including payment network providers, financial institutions, payment gateways, and POS terminals.
• Write clean, maintainable, and efficient code that adheres to best practices and coding standards.
• Participate in code reviews and contribute to improving coding standards and processes.
• Collaborate with cross-functional teams to identify and solve complex technical problems.
• Stay up-to-date with emerging technologies and industry trends, proposing new technologies and tools to improve our products and services.

Nice to Have

• Experience with cloud computing platforms such as Amazon Web Services (AWS) or Microsoft Azure.
• Experience with containerization technologies such as Docker and Kubernetes.
• Experience with microservices and serverless architecture using tools like Docker, Kubernetes, AWS Lambda, and AWS API Gateway.

Minimum Requirements

• Bachelor’s or Master’s degree in Computer Science or a related field.
• 0-5 years of experience in developing software applications.
• A good understanding of software design principles and architectural patterns.
• Effective written and oral communication skills, along with excellent interpersonal skills.

Why Should You Join Us?
Open Fabric is a fintech platform that simplifies digital payments and removes friction in the payment process. We operate primarily in Southeast Asia, working with credit and payment providers to help them expand merchant acceptance. Our goal is to create a seamless and efficient commerce network that offers consumers maximum choice and convenience.

Our team comprises industry veterans with years of experience in the fintech space. We are also backed by leading venture capitalists, enabling us to pursue ambitious goals and push the boundaries of what’s possible in online payments.

We are currently looking for talented individuals to join our team and help us achieve our mission. We offer a dynamic and fast-paced work environment where you'll have the opportunity to work with driven and passionate individuals. If you're excited about the problem we're solving and eager to make an impact, we'd love to hear from you.

How to Apply
Come join us! Email your resume to [email protected].

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

We adopt an Agile development approach and work towards adopting tech best practices and cutting edge tools.

We are seeking a highly motivated individuals skilled in DevOps to join us for some exciting projects.

You’ll work with a multidisciplinary team of designers, developers and business experts to create solutions that exist in both digital and physical realms.

As we launch new products, your role will be to ensure that the future of public service is not just functional, but delightful to use.

Rather than work on commercial ventures commonly found in the startup scene, we're here to improve how we live as a society through what we can offer as a government.

Technology Solutions Office is looking for DevOps Engineer

Internal Code: A25024

What will you do?

• Manage the development of the internal engineering productivity tools and environments.
• Providing DevOps architecture implementation and operational support
• Architecture and planning for cloud deployments (Private and Public cloud);
• Be an innovative and hands-on DevOps engineer capable of looking at both the technology and strategy around the platform.
• Future-proofing the technical environments and ensuring extremely high levels of automation, availability, scalability and resilience.
• Manage the development of the internal engineering productivity tools and environments.
• Manage processes, automation, best practices, documentation.
• Development and operation of continuous integration and deployment pipelines.
• Monitoring automation to effectively detect/predict/prevent issues in the environment and code base.
• Ability to conduct research into software issues and products as required
• Working with the latest tools and techniques
• Hands-on coding and mentoring, usually in a pair programming environment
• Working in highly collaborative teams and building quality environments.
• Ability to effectively prioritize and execute tasks in a high-pressure, fast paced, global environment
• Knowledge in lots of different open source technologies and configurations. 

What are we looking for?

• Degree or Diploma in Computer Science/Engineering, Information Technology,
• Communications or other related disciplines.
• Strong knowledge and experience in Devops automation, containerisation and orchestration using tools like Kubernetes, Terraform, Ansible and Docker
• Strong scripting skills e.g. Python, Bash, JavaScript
• Cloud computing deployment and management experience – AWS, Azure
• Understand/practice Agile projects
• Strong understanding of networking
• Experience in Infrastructure as Code (IaC)

Preferred:

• Experience with highly scalable distributed systems
• Breadth of knowledge - OS, networking, distributed computing, cloud computing

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Responsibilities:

• Install, configure, and maintain server operating systems (Windows/Linux/VMWare)
• Deploy, configure, manage, and troubleshoot the following software/hardware - Active Directory, Exchange Server & Exchange Online, VMware ESXi, SAN Storage & Backup
• Perform routine system administration duties
• Monitor servers and troubleshoot issues
• Provide additional support when necessary (eg. backup and storage functions)
• Perform proper documents for all processes
• Recommend solutions and ensure all IT issues have been corrected, and maintain records of work performed
• Provide technical support across the company, including Singapore, regional offices, and retail stores
• Provide technical support to server and network infrastructure and perform regular upgrades to ensure systems remain updated
• Troubleshoot system failures or bugs, and provide solutions to restore functionality
• Assist with any ad-hoc tasks as assigned

Requirements:

• Minimum Diploma in Computer Science, Information Technology, or a similar field
• At least 2-3 years of working experience in the related field
• Experience in configuring, monitoring, and troubleshooting systems
• Able to communicate effectively in both oral and written aspects
• Able to work independently and in a team
• Possesses analytical skills and works well in a fast-paced environment

Key Responsibilities:

• Design and implement network architectures for LAN/WAN/Wireless
• Configure and deploy routing protocols (OSPF, EIGRP, BGP).
• Implement switching protocols (STP, MSTP, VLANs).
• Design and implement network security measures (firewalls, ACLs, VPNs).
• Support, Configure, Maintain and Upgrade corporate customer’s network devices
• Ensure network security and connectivity
• Monitor network performance (availability, utilization, throughput and latency)
• Incident/Problem/Change/Service Request/Configuration Management.
• Create and maintain technical documentation (network diagrams, configurations).
• Assist in network design and implementation.

Experience:

• 8 - 10 years of experience in supporting, configuration, maintenance, and upgrading corporate customer’s network devices.
• CCNP certified (Routing and Switching).
• Good understanding and hands-on experience of networking protocols like routing and switching and Wireless (Physical experience in data centres for all Network devices/equipment).
• Experience in Firewall configuration and network security policy implementation. Hands-on experience on FortiGate/Cisco/Palo Alto/Aruba/ Huawei is desirable.
• Experience in debugging and fixing technical problems in network by coordinating with vendors, data centre and onsite support teams whenever required.
• Have experience in creating network documents and flow diagrams.
• Hands-on remote access and site to site VPN.
• Experience in monitoring tools like solar wind, NMS, Wireshark, MRTG Cacti etc.
• Knowledge of Windows, Linux and Load Balancer will be added advantage.

About Us!

The Housing and Development Board (HDB) has been at the forefront of the Public Service Transformation effort, iteratively building towards the successful delivery of HDB’s services to our customers digitally. The Information Services Group in HDB champions this effort, developing customised IT solutions that affords HDB the flexibility and efficiency in serving its missions.

What Will You Do?

You will be in a pioneer team in HDB’s Information Services Group that seeks to embrace DevSecOps culture and practices for application development. With the goal of creating cross-functional teams that would be responsible for the end-to-end delivery of IT services, we aim to adopt a you-code-it, you-run-it approach to software product development and maintenance. The success of our endeavour will form the blueprint upon which all subsequent in-house DevSecOps teams can be modelled after.

As a software engineer on this team, you will work with fellow developers, your Technical Lead, Product Owner and Delivery Manager in iteratively delivering IT solutions for both internal and external stakeholders of HDB. You will have the opportunity to be exposed to different aspects of software delivery, including solution design, CI/CD pipeline configurations, frontend and backend development, and test automation.

You will be a Great Fit if you Have:

1. Have 3+ years frontend and/or backend software engineering experience in building scalable products, with a demonstrated ability in designing and building well-structured enterprise applications on commercial cloud:
a. Skilled in modern web application technology stack, such as React.js, Spring, FastAPI, Django, PostgreSQL.
b. Experienced in development and deployment on commercial cloud such as Amazon Web Services (AWS), Google Cloud Platform (GCP) and Microsoft Azure
c. Experienced in Loosely Coupled Architecture and Application Integration Patterns, such as Microservices and Scatter-Gather, with the ability to design and architect scalable and resilient systems
d. Experienced in containerisation technologies, such as Docker, AWS ECS and Kubernetes
e. Has exposure to infrastructure provision tools, such as Terraform and Ansible
f. Embraces the concept of DevSecOps and CI/CD, with experience in relevant CI technologies such as Git, Jenkins, and Bamboo.
g. Understand the concept of Secure-By-Design Lifecycle for Agile and the utilisation of technologies for SAST and DAST
h. Practised Test-Driven Development with the utilisation of automated testing
i. Exposure in performance optimisation and tuning of applications and databases
2. Is adaptable and thrives in dealing with uncertainties
3. Can articulate software problems and proposed solutions clearly
4. Thrives in working as a team, and embraces a team-first mentality

Good to Have:

- Adaptability and thrives in dealing with uncertainties

- Can articulate software problems and proposed solutions clearly

- Thrives in working as a team, and embraces a team-first mentality

- Takes initiative, pride and ownership in work

- Growth mindset

Successful candidates will be offered a 1+1 year contract in the first instance. Conversion to perm is dependent on good performance.

Find out more about a career with HDB at www.hdb.gov.sg/cs/infoweb/about-us/careers

Entry level applicants are welcomed to apply.

Please apply for the job through the Careers@Gov job portal as linked:

https://www.careers.hrp.gov.sg/sap/bc/ui5_ui5/sap/ZGERCFA004/index.html#/JobDescription/15442784/67c5b17f-30f4-1eef-b29d-77cf126ce20d

We are seeking a skilled and motivated Data Engineer with expertise in Hadoop, Spark, OpenShift Container Platform (OCP), and DevOps practices. As a Data Engineer, you will be responsible for designing, developing, and maintaining efficient data pipelines, processing large-scale datasets. Your expertise in Hadoop, Spark, OCP, and DevOps will be crucial in ensuring the availability, scalability, and reliability of our ML Solutions.

Responsibilities:

• Implement data transformation, aggregation, and enrichment processes to support various data analytics and machine learning initiatives
• Collaborate with cross-functional teams to understand data requirements and translate them into effective data engineering solutions
• Ensure data quality and integrity throughout the data processing lifecycle
• Design and deploy data engineering solutions on OpenShift Container Platform (OCP) using containerization and orchestration techniques
• Optimize data engineering workflows for containerized deployment and efficient resource utilization
• Collaborate with DevOps teams to streamline deployment processes, implement CI/CD pipelines, and ensure platform stability
• Implement data governance practices, data lineage, and metadata management to ensure data accuracy, traceability, and compliance
• Monitor and optimize data pipeline performance, troubleshoot issues, and implement necessary enhancements
• Implement monitoring and logging mechanisms to ensure the health, availability, and performance of the data infrastructure
• Document data engineering processes, workflows, and infrastructure configurations for knowledge sharing and reference
• Stay updated with emerging technologies, industry trends, and best practices in data engineering and DevOps
• Provide technical leadership, mentorship, and guidance to junior team members to foster a culture of continuous learning and innovation to the continuous improvement of the analytics capabilities within the bank

• Bachelor's degree in Computer Science, Information Technology, or a related field
• Proven 2-5 Years of experience as a Data Engineer, working with Hadoop, Spark, and data processing technologies in large-scale environments
• trong expertise in designing and developing data infrastructure using Hadoop, Spark, and related tools (HDFS, Hive, Pig, etc)
• Experience with containerization platforms such as OpenShift Container Platform (OCP) and container orchestration using Kubernetes
• Proficiency in programming languages commonly used in data engineering, such as Spark, Python, Scala, or Java
• Knowledge of DevOps practices, CI/CD pipelines, and infrastructure automation tools (e.g., Docker, Jenkins, Ansible, BitBucket)
• Experience with Graphana, Prometheus, Splunk will be an added benefit
• trong problem-solving and troubleshooting skills with a proactive approach to resolving technical challenges
• Excellent collaboration and communication skills to work effectively with cross-functional teams
• Ability to manage multiple priorities, meet deadlines, and deliver high-quality results in a fast-paced environment
• Experience with cloud platforms (e.g., AWS, Azure, GCP) and their data services is a plus

We seek individuals with highly developed conceptual, strategic, and analytical skills, capable of striking a balance between visionary thinking and practical solutions. The ability to comprehend, inspire, and mobilize others is crucial. A business-oriented mindset coupled with effective storytelling will drive your success. We are looking for self-starters ready to take on responsibilities with enthusiasm.

Roles & Responsibilities

• Developing and maintaining the entire DevOps pipelines.
• Coordinate with the stakeholders from requirements gathering until successful implementation DevOps pipeline on boarding.
• Work with the vendors and for internal platforms to setup centralized DevOps solutions considering market best practice, Industry standard and ease of support.
• Work with the vendors and for internal platforms to upgrade the DevOps tools farm and integrating with tools.
• Lead analysis and resolution of root cause for Test Orchestration / Environment related issues
• Ability to multitask and work in a fast-paced, collaborative team environment.
• Excellent written and oral communication skills; writing, publishing and conference-level presentation skills
• Stays current with industry trends and leads development of key DevOps, Runtime, and Operational innovation platforms.

• Deep technical background, with hands-on experience in supporting CI/CD pipelines (Bitbucket, Jenkins, Artifactory, Sonar, Veracode for SAST, JIRA and Confluence).
• Hands on experience building CI/CD pipelines orchestration by Jenkins, GitLab CI, GitHub Actions or similar tools is a must-have.
• Skill to containerize a application and good if Kubernetes
• Good Experience on OpenShift or AWS
• Prior technical background on different build and branching strategies.
• Deep technical background on Kubernetes deployment process.
• Good knowledge on maintaining/deploying secrets in Kubernetes.
• Prior working experience in setting up Jira workflow.
• Strong hands-on experience on Shell or Groovy scripting.
• Prior experience is customizing JIRA and Setting up confluence spaces.
• Prior hand-on experience in setting up CI/CD pipeline as a centralized solution.
• Hand on experience in setting up DevOps governance, Security standards and audit requirements.
• Prior experience in setting up DevOps pipeline in internal and external cloud offerings.
• Experience with continuous testing, techniques and tools (Junit, Sonar Cube, Veracode etc.)
• Technical exposure of automation accomplished with advanced Python, Chef, Ruby and PowerShell
• Working knowledge of Murex, MxTest, Mx pipeline and Machine Learning applications will be an advantage.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design.
• Min. 5 years of experience in CMOS Analog IC design and simulation.
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent).
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Be a Part of Something BIG!

Singtel is seeking an Innovation Design Lead to spearhead the exploration and implementation of cutting-edge design technologies and methodologies. The Innovation Design Lead works at the intersection of design, technology, and business strategy to create forward-thinking solutions that push the boundaries of traditional design. From static imagery to motion graphics, the Innovation Design Lead is able to transform ordinary briefs into extraordinary experiences through creative execution and strategic campaign planning. The ideal candidate will have a strong creative vision and the ability to communicate effectively with both internal and external teams.

Make an Impact by

• Team Leadership - Manage and mentor a team of designers, fostering a collaborative environment that encourages creativity and innovation.
• Project Oversight - Oversee all stages of design projects from conception to execution, ensuring that timelines and quality standards are met.
• Campaign Planning - Collaborate with the marketing team to plan and execute creative campaigns. Ensure all visual content supports the overarching campaign strategy and business goals. Work closely with Creative Lead, marketing teams, peers, and other key stakeholders to brainstorm and develop content ideas. Provide clear, concise direction and feedback to internal and external parties involved in content production.
• Strong Copywriting - Able to complement visual content with creative, clear and concise writing.
• AI Integration: Utilize AI tools to streamline design processes, enhance creativity, and improve decision-making. This includes generative design techniques to explore new concepts and optimize existing designs.
• Stakeholder Communication - Able to collaborate across functions, present design concepts and solutions to stakeholders, articulating the rationale behind design decisions.
• Innovation & Trend Monitoring - Stay updated with industry trends, new technologies, and best practices in visual media. Continuously seek innovative ways to improve content quality and effectiveness, especially in an AI powered world.
• Strategic Design Leadership - Define the overall design strategy, ensuring that it aligns with the company’s vision and leverages AI capabilities to enhance product offerings.

Skills for Success

• Min Diploma holder
• A minimum of 5-10 years of experience in design roles, with at least 2-5 years in a leadership position at an in-house Creative team or advertising agency. Experience with AI-driven design processes is highly desirable.
• Proficiency in modern design tools (e.g., Adobe Creative Suite, Figma).
• Able to drive multiple projects from start to finish.
• An expert in design workflows with the ability to execute static ideas into moving visuals flawlessly. Doesn’t hesitate to get into the details, and does not lose sight of the broader strategic intent.
• Strategic thinker; always curious and creatively-minded in every way.
• Able to give and receive feedback positively without taking it too personally. See the value of different perspectives.
• Willing to work occasionally on weekends & public holidays, if required.
• Strong copywriting and presentation skills and be fluent in English.
• A leader and a good team player; able to work well independently or with a team while under pressure.

Rewards that Go Beyond

• Flexible work arrangements
• Full suite of health and wellness benefits
• Ongoing training and development programs
• Internal mobility opportunities

Are you ready to say hello to BIG Possibilities?

Take the leap with Singtel to unlock new opportunities and accelerate your growth. Apply now and start your empowering career!

We are committed to a safe and healthy environment for our employees & customers and will require all prospective employees to be fully vaccinated.

Job Description:
We are seeking a skilled and motivated System Performance Engineer to join our team. In this role, you will develop and optimize operator libraries for large model inference, training, and fine-tuning processes. You will map operator library implementations to hardware, conduct performance analysis, and identify bottlenecks to maximize system efficiency and performance.

Key Responsibilities:

• Operator Library Development: Develop and optimize libraries for large model inference, training, and fine-tuning, ensuring efficient operation on hardware platforms.
• Performance Analysis: Analyze operator library implementations to identify and resolve performance bottlenecks, optimizing for memory usage, processing time, and data accuracy.
• Optimization Implementation: Engage in the software design and optimization of operator libraries, including instruction-level parallelism, to maximize hardware performance.
• Mapping to Hardware: Map operator library implementation to the underlying hardware, ensuring seamless execution and improved performance.
• Testing and Validation: Perform detailed testing, including memory usage and processing time analysis, to validate optimized library performance.

Qualifications:

• Educational Background: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Strong understanding of large model algorithms and the principles behind their design.
  • Proficiency in computer architecture and many-core processor principles.
  • Practical experience in CPU performance optimization.
• Programming Skills: Expertise in C/C++ programming for performance optimization.
• Communication Skills: Excellent interpersonal and communication abilities to collaborate effectively within cross-functional teams.

Why Join Us?

• Work on cutting-edge technologies and contribute to the development of high-performance systems.
• Collaborate with a dynamic team of experts in semiconductor and hardware design.
• Make an impact on the performance of next-generation hardware systems.

Job Description:

We are seeking a SoC Verification Engineer to test and validate System-on-Chip (SoC) designs. You will work with cross-functional teams to ensure chip functionality through verification using UVM, SystemVerilog, Python, and other cutting-edge tools.

Responsibilities:

• Develop verification plans for module and system-level testing.
• Collaborate with design engineers to address design defects and optimize chips.
• Set up virtual testing environments and develop test cases (direct and randomized).
• Analyze code coverage and functional coverage to ensure thorough testing.

Qualifications:

• Bachelor's degree in Electronics, Computer Science, or related field.
• 3+ years of experience in SoC verification.
• Strong knowledge of UVM, SystemVerilog, Python (TCL/Perl a plus).

Experience in IC Design Process and SoC/IP verification.

Job Summary:
We are looking for a highly skilled AI Chip Processor Core Verification Engineer to design, verify, and enhance AI processor cores. This specialized role demands deep expertise in hardware verification to ensure the functionality, efficiency, and performance of AI chips through systematic test planning and execution.

Key Responsibilities:

• Testplan Development & Verification:
  Develop comprehensive test plans, create and manage testbenches, and ensure thorough testing by analyzing code/functional coverage. Prepare detailed verification reports.
• Gate-Level Simulation:
  Conduct gate-level simulations to validate chip designs, generating and presenting simulation reports.
• Efficiency Improvement:
  Write and refine scripts (in Shell/Python) to automate tasks and enhance the verification workflow, improving overall efficiency.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Proficiency in UVM (Universal Verification Methodology) for testbench development.
  • Hands-on experience with Shell and Python scripting for verification tasks.
• Soft Skills:
  • Strong interpersonal and communication skills to work collaboratively with cross-functional teams.

We are seeking a highly skilled and innovative Executive Engineer, Mechanical to join our dynamic team in Singapore, Singapore. In this role, you will be responsible for designing and implementing cutting-edge mechanical engineering solutions for various building and infrastructure projects.

• Design and perform calculations for mechanical engineering works, including ACMV, fire protection systems, plumbing, and sanitary systems
• Conduct technical feasibility studies, life cycle analyses, and planning for building engineering projects
• Develop comprehensive study reports, design reports, and technical specifications for mechanical engineering projects
• Prepare detailed tender documents and evaluate proposals, providing thorough assessment reports
• Collaborate with cross-functional teams to ensure project goals are met efficiently and effectively
• Provide support in project management and contract administration for building engineering contracts
• Implement innovative mechanical engineering solutions while staying up-to-date with industry trends
• Troubleshoot and resolve complex mechanical engineering issues as they arise
• Mentor junior engineers and contribute to the overall growth of the engineering team
• Ensure compliance with industry standards and regulations in all project phases

Job Position:- Resident Engineer (M&E)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Mechanical or Electrical Engineering or equivalent.
• Possess at least 8 years of relevant and practical experience on site;

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local mechanical & electrical codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

This position is ideal for those who is passionate about solving challenging business problems and building applications that provide an excellent user experience. As a Staff Data Engineer, you will be an integral part of the Loyalty and Marketing development team, focusing on designing and building software solutions that leverage data to solve business problems.

The role is for a self motivated individual with strong foundational software engineering skills. The candidate will be extensively involved in hands on activities, including POCs, design, documentation, and development of new functionality. The candidate must be flexible and willing to switch tasks based on the team's needs.
Responsibilities:

• This position is ideal for an engineer who is passionate about solving challenging business problems and building applications that provide excellent user experiences. You will be an integral part of the Loyalty development team focusing on design and building of software solutions that leverage data to solve business problems.
• Strategic thinker and good business acumen to orient data engineering to the business needs of internal clients.
• Lead development and oversee programming testing functions to ensure that projects are securely delivered while fulfilling expectations.
• Identify opportunities for further enhancements and refinements to standards and processes.
• Lead by example, demonstrating accountability, mentoring junior team members, and by contributing to departmental procedures, best practices, and standards.
• The candidate will be extensively involved in hands on activities including POCs, design, documentation, coding, testing, implementation, and documentation of solutions for new development, system enhancements, and production support.
• Candidate must be flexible and willing to switch tasks based on team's needs.
• Development and programming functions to ensure that projects are delivered on time and within budget with good code quality.
• Work with architects, systems analysts, project managers, QA, and other developers to successfully implement business requirements while applying the latest available tools and technology.
• Responsible for the architecture, design, development, implementation of data based software applications. This includes working with both business and technical stakeholders to deliver high quality products and services that meet business requirements and expectations.
• Interact with business units to define requirements and modifications and use case to utilize in designing appropriate solutions.
• Provide recommendation on scope and scale of effort required to develop solution.
• Design, develop, document, and implement new programs and subprograms, as well as enhancements, modifications, and corrections to existing software Develop testing and debugging routines.
• Create documentation and procedures for installation and maintenance.
• Build and maintain relationship with global and virtual teams and third parties on software development or support issues.
• Identify opportunities for further enhancements and refinements to standards, best practices, and development methodologies.
• Work directly with Architects, System Analysts, Dev leads and QA team leads to manage the technical aspects of a development pipeline.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

We are looking for Service Engineer (PLC) to make an impact!

The Role:

As a Services Engineer, you will work within the Services operations team in Singapore and you will be responsible to support any job assign to you to ensure customer satisfaction with Schneider products and its services.

What will you do?

• Perform field service (customer site service) activities involving the installation supervision, commissioning, maintaining, modification, onsite training, system upgrade and repair of Schneider PLC.
• Responsible for a region or subgroup of field services.
• Performs installation supervision and commissioning of Schneider products including day to day service of the same.
• Performs maintenance for Schneider PLC.
• Trains customers on equipment operation and maintenance of Schneider PLC Product.
• Represents Schneider dealing with customer concerns.
• Responsible for identifying and reporting failure modes encountered when in the field. Also responsible for determining the cause of these failures.
• Solve Site problems at customers site and provides reports on these issues.
• Providing 24hrs telephone support for customers.
• Acquisition of Customer Service products.
• Support internal for spare parts warranty, preparation and assembly.
• Improve on site report and process.

What qualifications will make you successful?

• Min Diploma / Degree in Electrical & Electronics Engineering
• Min 3-5 yrs exp. in Oil & Gas sector, Power Generation, Petrochemical technical experience is an added advantage.
• Has experience and skilled in PLC. Technical knowledge of MV and LV equipment will be an added advantage.
• Willing to travel up to 80% within Region.
• Has teamwork and is customer oriented.
• Has good time management and able to work under pressure.
• Excellent verbal and written communication skills in English are essential.
• Ability to interface with all functional areas of the company.
• Skilled in Microsoft Office – Excel, Word and Power Point.

What’s in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership
• …and more!

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

Job Position:- Resident Engineer (C&S)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Civil or Structural Engineering or equivalent.
• Registered as Resident Engineer with BCA/IES/ACES.
• 3 to 10 years of relevant site supervision experience as a resident engineer.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

As a global leader in power and thermal management solutions, Delta Electronics was founded in 1971 and is headquartered in Taipei, Taiwan with annual revenue exceeding $13 billion. Our wide range of products and solutions cover power supplies, energy management systems, display solutions, and industrial automation products.

We are known for our focus on innovation, sustainability, and energy efficiency. Active investment in research & development, and implementation of cutting-edge technologies ensures our business drives positive environmental impact.

Looking forward to having you join our 85,000 colleagues in building a Smarter and Greener future, Together!

Position Overview:

As a Datacenter Infrastructure Field Application Engineer or Presales Engineer, you will be responsible for supporting and driving the sales of solutions within the datacenter infrastructure field. In this role, you will work closely with customers, sales teams, and other technical personnel to ensure the successful deployment and integration of CDU/Cooling systems in datacenter environments.

Key Responsibilities:

• Expertise in CDU/Cooling Solutions: Possess in-depth knowledge of Data Center products, solutions, and services, keeping up-to-date with industry trends and technological advancements related to datacenter infrastructure.
• Sales Support: Collaborate with the sales team to participate in customer meetings and presentations, understanding customer needs, and proposing appropriate solutions.
• Technical Consultation: Engage in technical discussions with customers to understand their datacenter infrastructure requirements and propose tailored solutions.
• Solution Design and Proposal: Create detailed technical proposals and designs that address customer requirements, including system configurations, power distribution, backup options, and monitoring capabilities.
• Project Management: Collaborate with project managers, engineers, and installation teams to ensure the successful implementation and commissioning of systems in datacenter environments. Provide technical guidance and coordinate tasks throughout the project lifecycle.
• Demonstration and Training: Conduct technical demonstrations and training sessions for customers and sales teams to showcase the capabilities and benefits of solutions.
• Customer Relationship Management: Build and maintain strong relationships with customers, addressing their technical queries, providing post-sales support, and proactively identifying opportunities for additional solutions and services.
• Industry Expertise: Stay updated with the latest industry standards, regulations, and best practices related to datacenter infrastructure, power distribution, and systems.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering, Computer Science, or a related technical field is preferred.
• Experience: Prior experience as a Field Application Engineer, Presales Engineer, or a similar role within the datacenter infrastructure industry, with a focus on CDU/Cooling solutions and power management. Experience in supporting sales teams and customers is highly desirable.
• Communication Skills: Excellent verbal and written communication skills to effectively convey technical concepts and solutions to customers and internal stakeholders. Ability to deliver compelling presentations and demonstrations.
• Problem-solving Skills: Strong analytical and problem-solving abilities to identify customer requirements, propose effective solutions, and troubleshoot technical issues.
• Project Management: Familiarity with project management methodologies and tools to manage multiple projects simultaneously, ensuring timely delivery and customer satisfaction.
• Customer Focus: Demonstrated ability to understand customer needs and offer suitable solutions. Strong customer service orientation and ability to foster long-term customer relationships.