Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Be a Part of Something BIG!

Singtel is seeking an Innovation Design Lead to spearhead the exploration and implementation of cutting-edge design technologies and methodologies. The Innovation Design Lead works at the intersection of design, technology, and business strategy to create forward-thinking solutions that push the boundaries of traditional design. From static imagery to motion graphics, the Innovation Design Lead is able to transform ordinary briefs into extraordinary experiences through creative execution and strategic campaign planning. The ideal candidate will have a strong creative vision and the ability to communicate effectively with both internal and external teams.

Make an Impact by

• Team Leadership - Manage and mentor a team of designers, fostering a collaborative environment that encourages creativity and innovation.
• Project Oversight - Oversee all stages of design projects from conception to execution, ensuring that timelines and quality standards are met.
• Campaign Planning - Collaborate with the marketing team to plan and execute creative campaigns. Ensure all visual content supports the overarching campaign strategy and business goals. Work closely with Creative Lead, marketing teams, peers, and other key stakeholders to brainstorm and develop content ideas. Provide clear, concise direction and feedback to internal and external parties involved in content production.
• Strong Copywriting - Able to complement visual content with creative, clear and concise writing.
• AI Integration: Utilize AI tools to streamline design processes, enhance creativity, and improve decision-making. This includes generative design techniques to explore new concepts and optimize existing designs.
• Stakeholder Communication - Able to collaborate across functions, present design concepts and solutions to stakeholders, articulating the rationale behind design decisions.
• Innovation & Trend Monitoring - Stay updated with industry trends, new technologies, and best practices in visual media. Continuously seek innovative ways to improve content quality and effectiveness, especially in an AI powered world.
• Strategic Design Leadership - Define the overall design strategy, ensuring that it aligns with the company’s vision and leverages AI capabilities to enhance product offerings.

Skills for Success

• Min Diploma holder
• A minimum of 5-10 years of experience in design roles, with at least 2-5 years in a leadership position at an in-house Creative team or advertising agency. Experience with AI-driven design processes is highly desirable.
• Proficiency in modern design tools (e.g., Adobe Creative Suite, Figma).
• Able to drive multiple projects from start to finish.
• An expert in design workflows with the ability to execute static ideas into moving visuals flawlessly. Doesn’t hesitate to get into the details, and does not lose sight of the broader strategic intent.
• Strategic thinker; always curious and creatively-minded in every way.
• Able to give and receive feedback positively without taking it too personally. See the value of different perspectives.
• Willing to work occasionally on weekends & public holidays, if required.
• Strong copywriting and presentation skills and be fluent in English.
• A leader and a good team player; able to work well independently or with a team while under pressure.

Rewards that Go Beyond

• Flexible work arrangements
• Full suite of health and wellness benefits
• Ongoing training and development programs
• Internal mobility opportunities

Are you ready to say hello to BIG Possibilities?

Take the leap with Singtel to unlock new opportunities and accelerate your growth. Apply now and start your empowering career!

We are committed to a safe and healthy environment for our employees & customers and will require all prospective employees to be fully vaccinated.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Senior/Civil & Structural Design Engineer (A1 main contractor)

Our client is a leading reputable A1 main contractor renowned for their impressive portfolio of iconic mixed development, residential and industrial building projects across Singapore. They’re now looking for a Senior/C&S Design Engineer to join them for an iconic institutional building project in the CBD area, supporting their ongoing contributions to the Singapore building landscape.

Job Responsibilities

• Provide technical expertise in the design and coordination of the civil and structural aspects of our construction projects.
• Work closely with project teams to ensure that all structural elements are designed to meet project specifications, regulations, and quality standards.
• Coordinate and liaise with relevant stakeholders to ensure the design complies with all requirement
• Prepare and present technical engineering reports, calculations, drawings, and specifications for project designs.
• Participate in the value engineering process to ensure cost-effective and efficient design solutions.

Requirements

• Degree in Civil/Structural Engineering, Construction Management, or related field
• Minimum 4 years of relevant building project/steel structures experience
• Possess knowledge of preparing construction sequencing drawings
• Experienced in resolving site issues too

Location: Central

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Who We Are

The EDL Group is a leader in surfacing materials, serving architects and interior designers with cutting-edge solutions for stunning and functional spaces. Headquartered in Singapore, with a regional presence and over 200 employees worldwide, we pride ourselves on delivering innovative, design-led products that inspire creativity.

Job Description

We are looking for a Design Manager to spearhead our Graphic Design team and bring bold, innovative ideas to life.

Key Responsibilities

1. Strategic Planning:

• Collaborate with senior management to define the creative direction and align it with business goals.
• Develop and implement strategies to enhance the design team’s productivity and creativity.
• Ensure all creative outputs align with brand guidelines, company objectives, and marketing goals.

2. Internal collaboration:

• Work closely with internal stakeholders across departments to understand project goals and creative requirements.
• Act as the key point of contact for internal design needs, managing expectations and delivering high-quality results.

3. Concept Development & Execution:

• Drive brainstorming sessions to develop innovative ideas that meet internal objectives.
• Oversee the design process from concept to final delivery

4. Team Leadership:

• Lead, mentor, and inspire the graphic design team
• Provide constructive feedback and guidance to team members to elevate the quality of deliverables and foster professional growth.

Qualifications

• Proficiency in Adobe Creative Suite (Illustrator, Photoshop, After Effects, Premiere Pro, etc.) and other design tools.
• Experience in Print, Motion Graphics, and Digital Design (websites, social media, animations, videos).
• A strong portfolio showcasing a variety of projects, including print, motion, and digital designs
• Strong communication skills
• Capable of working independently and managing multiple projects and deadlines.
• A proactive mindset, passion for design, and eagerness to learn new skills.

Preferred Skills

• Expertise in typography, 3D design, or advanced motion graphics.
• Understanding of UX/UI design principles for digital projects.

What We Offer

• A dynamic and creative work environment.
• Opportunities for growth and development.
• The chance to lead and shape impactful projects

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

- Location: Bedok

- 5days work

- Basic + AWS + VB

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.

Requirement:

• Diploma/ Degree in Electrical/ Electronics Engineering or related discipline
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

This role is responsible for technical specification and definition of industrial systems, products and solutions including system and product design, technical sourcing of such systems / products and digitization applications. This role defines regional product and system portfolios and create ways to fulfill such portfolio through local capability, partners and Envac AB HO & cross regional technical collaboration. This role actively interacts with commercial functions and customers to know the market trends and customer needs in order to fulfill such needs in a timely manner. This role protects ad define market position of Envac’s various product portfolio with strategic pricing schemes and drives the commercial team to achieve profitable growth with co-responsibility for profitability. The candidate will be reporting to the General Manager.

Key Responsibilities:

Products / Systems

Manage product life cycles including new products and accessory configuration update. Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements. Focus on Product and system Application Development for Southeast Asia and China. This is to broaden and differentiate Envac offers.

• The above scope includes technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design – (Have team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

-To attend technical review with sales team

-To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

-To attend coordination meetings with architects, M&E and structural consultants

-To coordinate and determine the level of pipe sleeve crossing under major roads

-To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc

-To determine the position and depth of launching pits that will aid the installation under major roads

-To study and highlight authority requirements during the meeting.

-To reply to HDB review form

-To reply to NEA BP, DC, WD Advise

-To produce preliminary drawings to aid the tender process for main contractor

-To prepare drawings for PWCS QP endorsement

-To prepare drawings for Acoustic Consultant’s specifications

-To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

-To attend technical meetings with main contractors

-To coordinate pipe clashes with M&E and structural services

Design Support

-To generate fabrication drawings for non-standard equipment

-To monitor project design submission schedule

-To allocate work assignments to other designers

-To check designs, shop drawings done by other designers

-To hold trainings to designers

Job Responsibilities

• To respond, follow up and complete design requests on time.
• To understand project requirements and produce designs for proposals and tenders, collaborating with Sales and Operations Teams to clinch projects.
• To take on special customized projects whenever required
• To ensure information are properly handed over to Sales and Operations Teams, in accordance to client’s requirements and ensuring all installation compliance
• To visit Clients with Sales/Operations team for presentations, networking etc.
• To assist Design Manager to perform any other related projects and duties as required.

Job Requirements

• Degree in Architecture or equivalent
• Preferably 2 years of working experience in design, landscape, architecture, or any related field
• Software Skill(s): Revit, Autocad, Lumion, Sketchup, Photoshop, 3Ds Max.
• Creative and has technical knowledge in basic construction design
• Able to create design concept and narrative for Design Proposals

Job Purpose:

The Design Manager will play a pivotal role in enhancing the unique style and personality of The Standard, Singapore. Working closely with the property and Corporate Design Team, you will support the property’s design initiatives, focusing on furniture, small construction projects, signage, maintenance of existing designs, and assisting in design development. Your creativity will be key to ensuring that every visual element aligns with The Standard’s vibrant and distinctive brand.

Duties and Responsibilities:

• Collaborate with Teams: Work closely with the Management Team to ensure that all spaces meet the specified standards and that public areas are always "in show" status.
• Maintain Design Integrity: Partner with Housekeeping, Engineering, and Food & Beverage teams to ensure that interior design standards are consistently met. This includes ensuring all rooms, displays, layouts, structures, signage, and event setups are visually up to par.
• Lead Property Tours: Conduct weekly property tours with department heads to report on active, pending, and completed projects impacting guest experience, ensuring they are aligned with brand integrity.
• Project Reporting: Assist in clear and accurate reporting of design projects across all departments, ensuring ongoing communication and understanding.
• Design Execution: Execute all design-related projects as specified by the corporate design team, including material sourcing, vendor selection, budget management, and creating maintenance manuals.
• Vendor Coordination: Schedule, follow up, and oversee outside vendor projects in a professional manner.
• Procurement and Inventory Management: Manage the processing and tracking of Purchase Orders, coordinate furniture placement, landscaping maintenance, and oversee tools and materials needed across the property. Maintain and organize inventory of all fixtures, furniture, and equipment on and off property.
• Support Marketing and Events: Collaborate with the marketing team on the physical and creative setups for activations and events, ensuring design consistency.
• Installations and Communication: Coordinate on-site installations and communicate work schedules with relevant departments.
• Material Sourcing: Source new and replacement materials for projects, whether locally, nationally, or internationally.

Skills and Qualifications:

• Bachelor’s degree in Interior Design, Architecture, or a related field.
• 2-4 years of interior design experience, preferably within hospitality or lifestyle brands.
• Strong project management skills with the ability to manage multiple tasks and meet deadlines.
• Proficiency in Adobe Creative Suite, Microsoft Office, CAD, SketchUp, and similar design software.
• Ability to read and interpret construction documents, floor plans, and understand spatial relationships.
• Knowledge of basic wood and metal finishes and general contracting terms.
• Excellent communication skills in English, both verbal and written.
• Highly organized with extreme attention to detail.
• Ability to work independently and as part of a team with a positive attitude.
• Adaptability and the ability to thrive in a fast-paced environment, meeting project needs and expectations.

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Create comprehensive electrical circuit diagrams for automation and equipment systems.
• Assess, integrate, and validate hardware to ensure compliance with technical specifications.
• Produce CAD drawings depicting electrical circuits.
• Assist in diagnosing and resolving issues with system assembly, operation, and testing.
• Aid in equipment setup, problem-solving, and occasional installation.
• Provide assistance in testing new hardware and applications in-house.

Requirements

• Experience in automation machine design, proficiency in Electrical Design Software, electrical/electronic circuits and test instrumentation

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860

Only Shortlisted candidates will be notified

Quek Jian Wei

Reg No. R22110928

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Key Responsibilities:

• Create conceptual designs and presentations, including mood boards, sketches, and 3D models.
• Develop detailed design plans, floor layouts, and specifications.
• Engage with clients to understand their requirements, preferences, and goals.
• Present design concepts and ensure client approval at every stage.
• Coordinate with architects, contractors, and suppliers to ensure seamless project execution.
• Manage project timelines and budgets, ensuring all deliverables meet quality standards.
• Source and recommend materials, furnishings, and fixtures that align with the design vision and budget.
• Stay updated on market trends and innovative materials.
• Ensure designs comply with safety, accessibility, and building code requirements.
• Prepare and submit necessary documentation for regulatory approvals.
• Work closely with other designers, drafters, and project coordinators to achieve project goals.
• Provide guidance and feedback to junior team members as required.

Qualifications:

• Proficiency in design software such as AutoCAD, SketchUp, 3D Max, Revit, or similar tools.
• Strong understanding of space planning, materials, and design principles.
• Excellent visualization skills with attention to detail.
• Candidates with no experience are welcome to apply.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Our client is a well-established construction, property development and specialist engineering solutions provider. Currently, they are currently seeking for Design Manager to be part of the team.

The ideal candidate is a highly experienced and skilled Design Manager with minimum of 15 years of civil engineering or architecture experience post-tertiary education and hold professional status. The candidate should have a proven track record of managing design teams on projects for large scale of Design & Build nature of industrial or treatment process plant. The Design Manager must be well-versed with regulatory agencies’ requirements and standards.

JOB DIMENSION (SCOPE)

• Lead and manage design consultant teams to deliver high-quality design solutions on time and within budget.
• Oversee the entire design process, from concept through to detailed design and construction documentation.
• Ensure designs meet project specifications, regulatory requirements, and client expectations.
• Coordinate with multidisciplinary teams, including architects, engineers, and consultants.
• Foster a collaborative and productive team environment.
• Provide mentorship and guidance to junior designers and engineers.
• Act as the primary point of contact for clients and stakeholders on design-related matters.
• Conduct regular meetings and presentations to update clients on project progress and address any concerns.
• Ensure client requirements are accurately captured and reflected in the design.
• Implement and enforce quality control procedures to ensure the highest standards of design.
• Review and approve design documents, drawings, and specifications.
• Conduct regular design audits and peer reviews to maintain quality and consistency.
• Ensure all designs comply with relevant regulatory requirements and standards.
• Liaise with regulatory agencies to obtain necessary approvals and permits.
• Stay updated on changes in regulations and standards and ensure designs are adapted accordingly.
• Provide technical leadership and expertise in civil engineering or architecture.
• Resolve complex design challenges and technical issues.
• Stay informed about the latest industry trends, technologies, and best practices.

JOB REQUIREMENTS

• Bachelor Degree in Civil Engineering, Architecture, or a related field.
• Master’s degree is preferred.
• Minimum of 15 years of relevant experience in civil engineering or architecture.
• Proven experience in managing design teams on complex projects.
• Experience in the design of multi-storey bus depots or similar structures is preferred.
• Professional Engineer (PE) or Registered Architect (RA) status.
• Strong leadership and team management skills.
• Excellent communication and interpersonal skills.
• Proficiency in design software and tools (e.g., AutoCAD, Revit, BIM).
• In-depth knowledge of regulatory requirements and standards.
• Strong problem-solving and decision-making abilities.

XCL World Academy is seeking to appoint a Secondary Years Design & Technology Teacher. This is a full-time contract position commencing from 1st August 2025.

Preference will be given to teachers who have relevant subject-specific IB MYP and DP experience, as well as a clear track record of superior teaching in international school settings.

Main Responsibilities
Teachers should be willing to contribute positively to the collaborative culture of the department and broader SY Team.
Demonstrates to professional ethics, international mindedness and the school’s mission.
Adheres cooperatively to XCL policies and regulations, including duties, deadlines, programme requirements (IB).
Seeks clarification in case of lack of clarity to fully meet all expectations of the role and sets and maintains high standards of professionalism.
Contributes to the development of curriculum and assessment documentations.
Show exemplary attendance to work eg. recognizes the importance and provides support for XCL extended school day activities.

Person Specifications
Undergraduate degree from a recognized university or college.
Teaching experience and professional certification specific to applied position.
Minimum of two years’ experience as a class teacher, preferably in an international K-12 school.
Preferred minimum 2 years of relevant IB programme experience.
Leadership experience in leading a department and performance managing employees.
Possess skills and attitudes aligned to the purpose, mission and vision of XCL World Academy.
Need clear eagerness, resilience and understanding to engage and collaborate in the development of a highly aspirational school.
Have demonstrated commitment and education and learning beyond the classroom.
Be flexible and willing to take on new challenges.
Salary commensurate with experience (International School) and according to the school's teaching scale.
This is a full time 2-year contract position, renewal will be offered based on performances and class allocations.

Application
Qualified candidates are welcome to apply by 23 January 2025

About us
XCL World Academy is an international school in Singapore for students aged 2 to 18, fully committed to the academic, emotional and social development of its students. We are immensely proud to be the first and only international school in Singapore authorized to offer all four International Baccalaureate (IB) programmes.

We aspire to recruit employees that share and understand our commitment to empowering an international community of happy learners who aspire to positively impact others. We are committed to safeguarding and promoting the welfare of children and young people. All appointments are subject to Safer Recruitment processes such as interviews, employment reference checks, identity and criminal record checks.

Job Description

• Manage and follow up with clients assigned.
• Discuss and propose professional advice on interior design, space planning, design conceptualization, and material selection to prospective clients.
• Graduates in interior design or related fields are welcome.
• Work closely with subcontractors and suppliers to ensure the project works smoothly.

Job Requirement:

• Customer-oriented with excellent communication skills.
• Proficient in AutoCAD, SketchUp and Photoshop is advantageous.
• Collaborate with the Visualization team to produce 3D design drawings.
• Ability to communicate thoughts & ideas effectively.
• Able to Multi-task and meet tight schedule.
• Positive Attitude, Sales-driven and Highly Self Motivated.
• Team player, Goal driven & Great work ethics.
• Candidates that can communicate Mandarin in order to liase with Mandarin speaking clients and Subcontractors.

Why join us?

• Fast track career advancement for achievers.
• Flexi working environment.
• Career progression opportunities.
• Excellent learning environment with the freedom to be creative.

COMPANY DESCRIPTION

Headquartered in Singapore, The EtonHouse International Education Group has 120 schools across 11 countries. We run pre-schools as well as K-12 international schools. Together, these schools provide internationally recognized programmes and high-quality education to over 20,000 students globally. The group also runs enrichment programmes and cutting-edge ed-tech programmes to scale the provision of high-quality education in pre-schools.

Over the last 27 years, EtonHouse has been at the forefront of international education in the Asia Pacific region and has won numerous awards. In 2019, our founder, Mrs. Ng Gim Choo won the EY Entrepreneur Of The Year Award in the Education category. In addition, EtonHouse was recently selected to be in the inaugural cohort of the Scale-Up SG programme, which is an Enterprise Singapore programme selecting high-growth potential local companies which can be groomed into future global champions.

With children at the heart of what we do and the vision to make good quality education accessible to every child in Singapore, EtonHouse launched the EtonHouse Community Fund (ECF) in 2015. As an independent IPC charity, ECF continuously runs initiatives to make a difference in the lives of vulnerable children.

EtonHouse Vision

Shaping the future through education

EtonHouse Mission

Developing confident and capable global citizens

Be a part of the EtonHouse family

We welcome passionate and dedicated professionals who share our belief in the power of education. Together, we can make a meaningful difference to children and society through education.

RESPONSIBILITIES

This is an exciting opportunity for an experienced Design & Technology teacher to join a growing, boutique school in the heart of Singapore. The successful applicant will be expected to teach Design & Technology from ages 9-16, Upper Primary to IGCSE. The school offers IGCSE Design & Technology so experience in this area would be an advantage. They will have outstanding subject knowledge and have the ability to enthuse and inspire students, maximising achievement and progress at all levels. A teacher with flexibility, resilience, and a caring and kind approach towards students. A learner with a drive to develop creative new approaches to student learning within a collaborative environment.

KEY RESPONSIBILITIES

• Deliver the Design & Technology curriculum to assigned classes in accordance with the school's timetable.
• Differentiate lessons according to the abilities and learning needs of individual students.
• Promote independent learning by adopting teaching and learning strategies which develop the competence and confidence of every student.
• Ensure the thorough implementation of subject specifications, teaching schemes, assessment policies and reporting procedures.
• Assess and develop the Design & Technology curriculum in the school
• Plan and deliver schemes of work, including the choice of appropriate teaching and learning methods to meet the needs of the subject, and of different students.
• Keep abreast of current developments in Design & Technology education and to adapt the curriculum content and methods of teaching and examining as appropriate.
• Identifying appropriate resources within the limits of the school budget.
• Ensure health and safety policies are followed within the Design & Technology workshop.
• Ensure that the Design & Technology workshop presents a stimulating environment, which help to influence students' attitudes positively towards the subject.
• Ensure students' work is regularly assessed and that homework is in line with school policy.
• Report to parents in accordance with the school's reporting policy.
• Use information gained from assessment, recording and reporting procedures to generate further improvement in student achievement.
• When required, take on a form tutor role in the Senior School and fulfill the responsibilities of that position.
• Follow the School's policies and procedures with regard to discipline and behaviour, daily routines, duties, homework, leave of absence and visits.
• Contribute to co-curricular activities that broaden students' experiences and contribute to the general life of the school.
• Promote the study of Design & Technology amongst students and parents.
• Attend and contribute to meetings of a professional nature.
• Maintain appropriate links with teaching colleagues in all sections of the school and foster cross-curricular links where appropriate.
• Liaise with members of the Inclusive Education Team with regard to individual students, to ensure that those needs are understood, planned for and met.
• Develop effective links with the wider community, in order to extend the study of Design & Technology and enhance teaching and learning.

• At least 2 5 years relevant professional teaching experience in education;
• The candidate should hold a minimum of a Bachelor Degree in Design and Techonlogy or Education or equivalent, which is obtained from a recognised University or College involving not less than 3 years full time study;
• Teachers Certificates, Diplomas or other Teacher Accreditation courses and certification are required if the applicant's degree is not in Education;
• IB PYP course and training are highly valued;
• Knowledge of or willingness to acquire knowledge of inquiry based learning is required;
• Applicants must provide original copies of their Certificates and academic transcripts for authentication;
• International experience, especially in Asia is highly regarded.

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects;

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies;

· To prepare final design configurations, layouts, solid models and production/engineering data;

· To assist in preparation of machine documentation, specifications, manual.

Job Requirements:

· Diploma or relevant in Mechanical Engineering;

· Will consider fresh-graduate.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable;

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.