• Reports to the Design Manager
• Review/Develop design drawings and documents in accordance with project requirements
• Coordinate all design related matters and participate in regular/ad-hoc meetings with Clients / Design consultants / Viaduct specialists / Subcontractor
• Monitor and update design schedule regularly
• Prepare & review shop/fabrication drawings for temporary/viaduct structure
• Support Design manager & lead in-house design engineer/drafter

Job Requirements

• Minimum Degree in Civil Engineering or equivalent
• Minimum 3 years of relevant experience of design & construction of bridge/ viaducts/ roads/ highways
• Candidate with experience in LTA (Road/MRT/Viaduct) is preferred
• Technical expertise and knowledge of concrete material & structure design
• Proficient in proposal for structural systems
• Proficient in AutoCAD
• Proficient in Structural Analysis Software (MIDAS, SAP, STAAD etc.)
• Good attitude towards work and timeline
• Independent, analytical and good interpersonal skills
• Location : Woodlands
• Project : Viaducts

What you will do

• Responsible for physical design and development activities of MediaTek Ghz, AI processors and neural network DSP
• Involve in activities encompass physical design and analysis of complex and timing-critical AI processors and neural network DSP Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing, power optimization and physical verification
• Work closely with MediaTek colleagues in Taiwan and Singapore in implementation methodology co-development and flow deployment

What you will bring

• Bachelor/Masters Degree in Electrical/Computer Engineering
• High-speed NPU/GPU/CPU Subsystem RTL Integration experience or IP/Block/SoC Design experience is preferred
• Experience with Synopsys ICC2/FC (preferred) or Cadence Innovus tools from netlists to GDS
• Experience in high-speed processor implementation/power reduction flows and methodology from RTL to GDS (including synthesis, floor-planning, placement, CTS, routing, timing optimization, physical verification)
• Experience with power noise and reliability tools such as Redhawk and Voltus
• Experience with timing signoff tools such as PrimeTime and Tempus and timing closure tools such as Tweaker and PrimeClosure
• Knowledge of high-speed/low power IP and custom circuit design
• Good communication and scripting skills

Location: One North, Singapore

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications.
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Electrical or Electro-mechanical engineering, preferably with a focus on motion systems
• At least 7 years of relevant working experience (semicon or similar)
• Knowledge of electric design principles of cabling, connectors, safety systems, electronic racks, PCB design
• User of 3D design tools and schematic drawing tools (e.g. NX, SolidWorks, E-Plan)
• Basic programming skills and ability to debug electrical systems
• Understanding of motion control systems
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing interdependency between electrical, electromechanical and mechanical (sub)systems
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications.
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Mechanical Engineering, preferably with a focus on construction / precision mechanics
• Knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• User of 3D design tools (e.g. NX or SolidWorks)
• User of product lifecycle management systems (e.g. TeamCenter or EPDM)
• Basic knowledge of FEA calculations in the area of mechanical design
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Senior Mechanical Design Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems
• Proficient in stakeholder management (internal and external) to increase effectiveness and efficiency of the team

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop mechanical design drawings by applying sound engineering principles, with innovation, to meet design objectives
• Work with Sales team on conceptual design
• Review design to ensure product costing control and project schedule
• Ensure assigned machine must be test run before ship out handing over to customer
• Discuss and solve complex mechanical problems with manufacturing department, customers and suppliers

Job Requirements

• Diploma/Degree in Mechanical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Able to work under tight schedule and under minimal supervision
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of Auto CAD
• Occasional travel maybe required

We regret that only shortlisted candidates will be notified.

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Responsibilities.

• Electrical design for Industrial Automation Systems
• Discuss project specification with sale department, internal design team and customer.
• Ensures project specification is sufficient for electrical design work.
• Ensure the drawing, software and manual are done and issue to the customer
• Support sales department in design concept and costing for new enquiries

Job Requirements

• Diploma/Degree in Electrical & Electronics Engineering or equivalent
• Design experience in similar capacity, preferably in Industrial Automation Systems and Robotic Systems added advantage
• Candidates without relevant experience will be considered for junior engineer role
• Occasional travel maybe required
• Able to work under tight schedule and minimal supervision
• CAD knowledge such as solid edge, Auto CAD, Inventor

We regret that only shortlisted candidates will be notified.

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop PLC programming for Industrial Automation systems
• Work with Sales team on conceptual design
• Conduct program debugging and test run
• Update project schedule for programming, debugging, test run and installation
• Lead software design contractors on design, test run and installation
• Discuss and solve complex software related problems with customers and contractors

Job Requirement

• Diploma/Degree in Electrical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of PLC & PC Programming Languages
• Able to work under tight schedule and under minimal supervision

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

Position Overview:

We are looking for a motivated and skilled Mechanical Design Engineer to join our dynamic team. In this role, you will be responsible for designing, analysing and overseeing the structural integrity of mechanical systems and components for our products. These include specialty vehicles, engines and shelters. This role demands a strong understanding of mechanical design, vehicle systems, and relevant automotive and/or military standards, with a focus on ensuring high performance, reliability, and operational effectiveness.

Key Responsibilities:

· Develop and optimize mechanical designs for mechanical and automotive systems, focusing on efficiency, manufacturability, and sustainability.

· Collaborate with multidisciplinary teams, including electrical and software engineers, to create innovative solutions that meet customer needs.

· Utilize advanced CAD tools (such as SolidWorks) to create 3D models and detailed engineering drawings.

· Perform simulations and analysis to validate designs and ensure they meet performance and safety criteria.

· Create prototypes and conduct hands-on testing to gather data, evaluate performance, and refine designs.

· Participate in design reviews and contribute to brainstorming sessions to drive continuous improvement and innovation.

· Maintain thorough documentation of design processes, test results, and compliance with industry regulations.

· Stay updated on industry advancements and incorporate new technologies and methodologies into your work.

· Support manufacturing team with technical guidance to ensure smooth production processes and troubleshoot any design-related issues.

Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree or higher qualification is a plus.
• At least 2 years of experience in mechanical design engineering, ideally within the automotive sector.
• Proficiency in 3D CAD software (e.g. SolidWorks) and familiarity with simulation tools (e.g. FEA, CFD).
• Strong knowledge of mechanical design standards, materials, and manufacturing processes.
• Excellent analytical and problem-solving skills with a focus on innovative solutions.
• Effective communication skills, both written and verbal, with the ability to collaborate in a team-oriented environment.
• Results-driven and detail-oriented mindset with a passion for engineering excellence and continuous improvement.

Preferred Skills:

• Strong communication and teamwork skills
• Experience with automotive and/or military vehicle standards and protocols
• Familiarity with vehicle system design and testing procedures.
• Knowledge of mechanical engineering principles as they apply to vehicle systems and structures.
• Experience with project management and leadership in a technical environment.

What we offer:

· Competitive salary and benefits package

· Opportunities for career advancement and professional development

· Collaborative work environment that fosters innovation and communication

· Mentorship and guidance on best practices in automotive and mechanical design

· Opportunity to work on exciting projects at the forefront of automotive technology

• Design/design management/coordination of infrastructure projects related to underground structures, deep excavations, and or civil works.
• Ensure engineering deliverables meet client expectations and the basis of design.
• Liaise with Senior Engineers, QP and local authorities.
• Degree in Civil Engineering.
• Minimum 3 years of design/design management/design coordination experience.
• Interdisciplinary coordination experience will be an added advantage.
• Fast learner with high aspiration for professional growth.

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Job role:

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 3 years of work experience in the digital backend design field.

3. Hands-on project experience is required.

4. Tapeout experience at advanced technology is prefered.

5. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

JOB HIGHLIGHTS

· Machine design in Mechanical aspect, Jig and Fixture, Equipment and development

· Provide Conceptual, mechanical part detailing and cost estimation

· BOM & machine manual writing

· Handle customers’ enquiries and issues

· Conduct machine acceptance with customer

· Co-ordination with sub-contractors for machine build

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

REQUIREMENT

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

· Able to work independently and within schedule

THE ROLE:

As a member of the SoC Physical Integration team, you'll interface with various engineering groups, including architecture, design, CAD, software, and product engineering, across various geographies to work towards the physical/electrical verification and tape out of AMD SoC FPGA/ACAP devices. Common essential duties and responsibilities include, but are not limited to:

• Defining and developing flows and methodologies for chip level integration
• Developing tools for design verification or efficiency
• Designing (RTL and custom), verifying, and integrating FPGA/ACAP sub-blocks
• Coordinating activities between different design groups to ensure smooth integration
• Executing chip level physical verification
• Executing chip level electrical verification

PREFERRED EXPERIENCE:

• Basic understanding of FPGA architecture
• Knowledge of and/or experience with design and verification tools such as Virtuoso and Calibre
• Knowledge of and/or experience with P&R tools
• Fundamental circuit design knowledge including simulation experience with Spice and Verilog
• Strong debug skills
• Scripting experience using Perl, Python, TCL, C-shell, Make and/or other scripting languages
• Knowledge and experience with basic Unix data management and job control
• Excellent written and oral communication skills

ACADEMIC CREDENTIALS:

• BS with 2+ years of exp or MS in Electrical Engineering, Computer Engineering or related equivalent

LOCATION:

Singapore

Responsibilities

• Coordinate with internal team in Singapore liaise with customers / consultants on day to day basis
• Preparation of project documents including BQ
• Handling Design & Build projects
• Prepare optimised design solutions for projects
• Prepare Design drawings (Single Line Drawings & layout)
• Prepare design calculations incl voltage drop, short circuit current etc.
• Support multiple M&E projects concurrently
• Lead project meetings and work with team members to achieve the deliverables on-time
• Ensure drawings & documents are well maintained & stored in a timely manner
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Electrical Engineering
• Minimum 2 yrs of relevant hands-on M&E experience in construction industry, LTA projects, mixed development etc
• Need to be familiar with Singapore codes such as SS638 (CP5), SS650, SS555 etc
• Hands-on experience in AutoCAD drawings is preferred
• Familiarity in BIM (Revit / Navisworks) is advantageous
• Having consultancy experience is preferred
• Possess effective organizational and follow-up skills, meticulous
• Good communication skills
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Job Descriptions

• Develop and Review Test Plan based on IC design specification
• Develop constrained-Random verification environment for complex DUT
• Develop/Modify Testbenches using UVM/SystemVerilog for Pre-Silion IP or SOCs
• Implement coverage matrix using cover point and assertion
• Create and debug tests for DUT
• Resolve bugs with remote designers

Requirements

• Bachelor/Masters Degree in Electrical/Electronics/Computer Engineering with min 1 year of experience
• Hands-on experience in Silicon/ IP verification using SystemVerilog/ UVM
• Strong understanding of verification process from test plan to coverage completion
• Strong communication and Analytical skills
• Understanding of HDL (Verilog, VHDL)
• Experience with designing with FPGA using Vivado is a plus

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655
EA Reg No: R1109557 Rose

Job Descriptions

• Develop and Review Test Plan based on IC design specification
• Develop constrained-Random verification environment for complex DUT
• Develop/Modify Testbenches using UVM/SystemVerilog for Pre-Silion IP or SOCs
• Implement coverage matrix using cover point and assertion
• Create and debug tests for DUT
• Resolve bugs with remote designers

Requirements

• Bachelor/Masters Degree in Electrical/Electronics/Computer Engineering with min 1 year of experience
• Hands-on experience in Silicon/ IP verification using SystemVerilog/ UVM
• Strong understanding of verification process from test plan to coverage completion
• Strong communication and Analytical skills
• Understanding of HDL (Verilog, VHDL)
• Experience with designing with FPGA using Vivado is a plus

This is 12 - months Contract (extendable + convertible)

Location: The Alpha, Science Park

Normal working hours

Essential Responsibilities:

• Carry out detail engineering task for water and wastewater treatment plant to full fill business obligation e.g. On-time delivery, Satisfy contract specification or industrial standard and bring value to customer. Work shall include but not limited to the following:
• Prepare sketches on P&IDs Drawing
• Prepare sketches on Fabrication Drawing
• Prepare sketches on Equipment Layout Drawing
• Prepare sketches on Pipe Routing Drawing
• Prepare equipment and material datasheet
• Perform equipment sizing calculation
• Perform pipe sizing calculation
• Perform hydraulic calculation
• Perform pipe stress analysis
• Perform material take off
• Raise purchase requisition
• Check and sign off engineering design
• Work together with in-house design team aboard to meet engineering deliverable.
• Contribute to value engineering to drive cost down.
• Evaluate vendor quote and provide input on vendor selection.
• Support business initiative to bid and win job as required.
• Support Project Management/ Construction Team on construction activities as required.
• Support Commissioning Team on commissioning activities as required.

Qualifications/Requirements:

• Bachelor Degree in Chemical/Mechanical/ Electrical Engineering
• Minimum 3- 5 years working experiences in design of water and wastewater
• Highly motivated and able to work under pressure
• Experience in construction, test and commission, and operation of water and wastewater plant is a plus point
• Well versed in MS Excel, MS Word, and MS PowerPoint
• Familiar in MS SharePoint, MS Team, and Naviswork
• Ability to operate AutoCAD and SAP is a plus point

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform you that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use, and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E

• EA License No. 01C4394

• Registration No. R23112260 (MayThinKyu)

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus