Key Responsibilities:

Simulator Design- develop AI chip Architecture Design- Using GEM5

Performance Optimization- working with AI software engineers to ensure computation algorithms, ensure circuit level

Front end code development

Job requirement

A Master or PhD in Electrical Engineering,Computer engineering related, with focus in chip design, hardware architecture, or AI systems is required

Proficiency in using simulation tools like GEM5, Synopsys, or similar platforms for simulating chip behavior and performance. o Strong understanding of AI algorithms and their hardware implementation, with hands-on experience in optimizing algorithms for AI tasks such as deep learning, machine learning, and neural networks.

//interested candidate may email your resume to [email protected] or apply here

• Design of control systems, instrumentation, cabling and cable support systems for Process equipment, Industrial Facilities and Commercial Buildings, with the support of a senior engineer if necessary;
• Design of Life Safety System comprising of Public Address Systems, Access control, Closed Circuit Television, Gas Detection and Fire Alarm systems with the support of a senior engineer if necessary;
• Design of Information Technology cabling system with the support of a senior engineer if necessary;
• Develop P&IDs, Instruments and IO list, Sequence of Operations, Logic Diagrams, Cause and effect matrices with the support of a senior engineer if necessary;
• Develop / Execute / Expedite ELV packages during design, procurement, construction phase of a project and taking responsibility for the assigned packages;
• Co-ordination and scheduling activities for the ELV supervisors on a project to ensure timely delivery at project milestone dates;
• Interfacing with other trades during design phase and incorporate their requirements into the ELV systems design;
• Technical Evaluation of vendor submissions including approval of shop drawings;
• Preparing the procedure for testing and commissioning of individual system and manage subcontractor during commissioning of the Extra Low Voltage systems;
• Guiding Designer / Draftsman for preparing cable routing plan, hookup drawings, wiring drawings, cable schedule, Junction Box schedule, Instrument Air manifold schedule, Block diagrams, P&IDs, Control System Schematic.

Requirements

• Minimum 4 years of relevant experience
• Good technical knowledge and understanding of Engineering Design and Construction for Basic Electrical Equipment and distributions concepts
• Basic knowledge of Project execution processes.
• Advanced knowledge of local code of practice of design implementation.
• Local construction knowledge

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

We are seeking for a motivated Design Engineer specializes in the design, analysis, and coordination of building works in construction projects. These professionals work closely with architects, structural engineers, and construction teams to ensure compliance with design specifications, and collaborating with various stakeholders to achieve project goals.

Responsibilities:

• Prepare and complete precast shop drawings within specific time and in accordance with the project timeline.
• Check for accuracy and update amendments to precast shop drawings.
• Produce precast layout plans and fabrication shop drawings of precast concrete elements for production and submission to clients.
• Liaise with consultants concerning drawing details and technical issues.
• Liaise internally with production and suppliers on the submission/ issuance of shop drawings, highlight technical issues and keep them updated of any revisions.
• Incorporate on the drawings (2D and 3D) and update any amendment openings and recesses, architectural features, cast-in-items, lifting system and any other relevant details.
• Coordinate Structural, Architectural and M&E drawings to check and highlight any discrepancy and raise RFI to finalize precast shop drawings for production.
• Request any detail required for precast shop drawings.
• Check every detail and ensure precast drawings tally with construction drawings.
• Attend technical meetings with consultants/clients as and when required.
• Perform any other ad-hoc duties assigned.

Requirements:

· Bachelor's degree in Building/Civil Engineering or related as recognized by PE Board.

· Minimum 5 years’ experience in site planning and coordination works for building projects.

· Minimum of 3 years of relevant practical experience in Precast design for building works in Singapore.

· Familiar with both structural detailing (including rebar detail) and basic architectural detailing.

· Proficiency in software (e.g., AutoCAD, Revit, TELKA or All Plan).

· Excellent organizational and time management skills.

· Strong communication and interpersonal skills.

· Attention to detail and a commitment to quality.

· Ability to work independently and as part of a team.

Job Description:

• Deliver technical design of CNC solutions for customize specification.
• Produce 2D&3D engineering drawings using Solidwork and CATIA.
• Analyze existing systems and improve designs.
• Conduct technical design review and evaluation to ensure compliance to standards.
• Documenting the design process, iterations for fabrication.
• Perform other duties as assigned.

Job Requirement:

• Good interpersonal and communication skill
• Proficiency with engineering design programs such as AutoCAD, Solidworks
• Knowledge of design and engineering principles
• Attentive to detail and critically minded
• Welcoming fresh graduate from mechanical engineering

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Job Responsibilities:

• Conduct site survey and prepare the drawing as per project requirements that complies to the SCDF regulations
• Perform technical assessment such as Shading analysis PVSyst simulation, consumption analysis and etc
• Prepare economics analysis, proposal and tender documents for submission
• Liaise with vendors/suppliers for price lists and up-to-date product and service information with the procurement team
• Familiarize yourself with Authority requirement and IEC standard or equivalent for renewable system installation)
• Coordinate closely with client site personnels and safety coordinators
• Liaise with other teams to gather feedback on design and costing for continuous improvement
• Produce design drawings like SLD, Panel and String Layout using AutoCAD software
• Ad hoc task assigned by the reporting officer
  

Job Requirements:

• Minimum Degree in Electrical Engineering/Renewable energy-related field is preferred
• Well versed with Autocad is a must. Familiar with PVSyst and Sketchup is a preferred
• Proficient in engineering drawing interpretation and adept at applying requirements to design effectivel
• At least 1-2 years prior experience preferred but not required
• Knowledge in electrical design and solar engineering
• Driven, high energy individual who strives for success
• Strong technical understanding and troubleshooting skills
• Quick learner, goal-oriented team player with strong communication
• Interest in renewable energy and sustainability is a plus

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Duties & Responsibilities

RF/Analog/Mixed Signal Design, Development and Evaluation of connectivity IC for short range RF wireless applications such as Bluetooth, WLAN, Zigbee, NFC, GNSS, IoT etc

Skills/Experience

• PhD in Microelectronics/Digital Communication/EE
• RFIC design experience in RF/Analog/Mixed signal circuits using CMOS/SiGe/GaAs process
• Must have strong knowledge in RF/Analog design and verification flow using CAD simulation and verification tools from Cadence, Keysight (Formerly Agilent) and Mentor Graphics etc
• Hands-on experience in the design of RF/Analog/Mix signal blocks such as (but not limited to) PA/ LNA/Mixer/VCO/Filter/VGA/PLL/ADDA, PMU etc
• In depth knowledge and design experience in mixed-signal systems and circuit design/verification of PLL/frequency synthesizer will be a plus
• Good knowledge in RF/Analog evaluation flow and operation of test equipment to evaluate RFIC performance
• Some experience in script writing such as pearl, skill, matlab etc will be advantageous
• Highly motivated, able to work independently and demonstrates strong analytical and communication skills
• Good interpersonal and creative skills with the ability to multitask in a demanding and fast paced environment

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• To be lead engineer or assistant lead engineer in new shipbuilding or ship repair/retrofit projects
• Provide specialist technical advice and information to internal and external parties
• Prepare detailed design drawing using 3D modelling tools, such detailed design drawing could include ducting design and necessary design document to enable production of prototype for product development
• Review and approve detailed design drawings and documents e.g., piping isometrics, piping layout, ducting arrangement, equipment foundation, equipment installation, machinery room layout, bill of materials and various mechanical outfitting drawings, and ensure that the deliverables meet contractual technical specification and Classification Society’s requirements
• Ensure the detailed design drawings and documents have met the standards set by the department and provide further input for improvement
• Update 3D software database on a regular basis to ensure correctness and consistency of component’s engineering attribute.
• Manage external consultants in engineering integration and deliverables
• Coordinate and lead a team of engineers to ensure timely and accurate engineering deliverables
• Participate in tests and sea trials, where required
• Liaise with ship owners and Classification Societies to obtain approval on engineering deliverables.
• Resolve technical issues raised by ship owners and Classification Societies
  

Requirements:

• Bachelor’s Degree with Honours in Mechanical/Marine/Offshore/Naval Architecture
• At least 5-8 years experience in engineering design on HVAC (Heating Ventilation and Air Conditioning) system
• Good working experience with HVAC turnkey contractor, HVAC equipment supplier, Shipyard HVAC related department
• Well-articulated in presentations to both clients and senior management, with good command of English, both spoken and written
• Strong leadership with project management and interpersonal skills

Knowledge and Skills:

• Strong knowledge of HVAC marine international design codes, Classification/Statutory Rules and Regulations.
• Engineering and design project management skills.
• Software (preferred): AVEVA Marine, AutoCAD or similar functions
• Software (need basis): VA One, Star CCM+, Aveva PID, Pipeflow Expert

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Position Overview:

We are seeking a skilled Senior Physical Design Engineer to join our team. As a Senior Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Lead the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.
• Mentor junior engineers and provide technical guidance and support as needed.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 3-5 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Able to guide junior colleague when needed.
• Excellent problem-solving skills and ability to work effectively in a team environment.

Job Description:

As a Senior Design Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Scope:

• Design and develop mechanical systems, products, and components
• Create detailed technical drawings and specifications using CAD software (e.g., AutoCAD, SolidWorks, CATIA)
• Conduct simulations and analysis (e.g., stress, thermal, fluid dynamics) to validate designs
• Collaborate with cross-functional teams to integrate mechanical designs with other systems
• Perform design modifications and improvements based on feedback and testing results
• Develop prototypes and conduct hands-on testing to ensure design feasibility and performance
• Select materials, components, and manufacturing processes for product development
• Ensure designs comply with safety, regulatory, and industry standards
• Prepare and review technical documentation, reports, and presentations for stakeholders
• Support the manufacturing team in product assembly, testing, and troubleshooting
• Manage design projects, ensuring timelines, budgets, and quality standards are met
• Continuously research and apply new design technologies and innovations to improve mechanical systems

Requirements:

• ITE, Diploma, or Degree in Mechanical Engineering
• Minimum two years of experience in customized automation machine design
• Experience in semi-con, connector, or machine design preferred
• Knowledge of SolidWorks, with Pro-E and Inventor as added advantages
• Strong understanding of mechanical movement, function, and performance
• Good perception of 2D & 3D objects and machining processes
• Passion for designing high-performance machines

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

THE PERSON:

The ideal candidate should have a deep understanding of analog design and able to lead, attend and present at design review meetings with teams worldwide.

KEY RESPONSIBILITIES:

• Circuit design of wireline transceiver building blocks (PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer, etc.)
• Conduct peer reviews of circuit design and verification results
• Working with validation team to evaluate silicon results

PREFERRED EXPERIENCE:

• Extensive experience with high speed analog design with blocks like ADC, PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer.
• Experience with latest process technologies like 7nm or below Finfet technology.

ACADEMIC CREDENTIALS:

• Bachelors/Masters/Phd Degree in Electronic Engineering

LOCATION:

Singapore

Meet the Team

The IoT Digital team is a state-of-art IC design team focused on producing world-class Wireless MCU SoCs. The architecture specification, design, verification, and implementation of the Wireless MCU SoCs is the responsibility of the IoT Digital team. These SoCs include an embedded CPU system with analog and digital peripherals, advanced security, state-of-the-art power management, and best-in-class radios to support a wide range of wireless IoT applications and standards.

As Verification Engineer, you will be working closely with the IC Design, System, and Architecture teams to develop and execute the verification plan for the next generation of IoT chips.

Responsibilities

• Block and IP Verification
• Block-level verification to validate block performance and adherence to requirements
• Generate and execute verification plan based on specifications
• Architect and implement test benches using UVM-based constrained-random and formal methods
• Coverage definition, implementation, and analysis
• Formal Verification of mixed-signal IP integration, including real-number modeling
• SoC Integration and Verification
• Define, test and debug use cases for the SoC
• Verify and debug low-power design
• Flows and Methodology
• Improve flows and methodologies to streamline IP development and integration.

Skills You Will Need

Minimum Qualifications:

• Min. 5 years of IC design experience for senior positions. Open to junior candidates with strong foundation.
• Industry experience developing test benches and verification components with SystemVerilog and UVM is required
• Knowledge of scripting/language (Python, PERL, shell, TCL)
• Design/Verification skills such as Software/Firmware coding (C), SystemVerilog Assertion and coverage analysis, Low-power implementation (UPF), Mixed Signal Real Number Modeling (RNM, Spice)

Benefits & Perks:

You can look forward to the following benefits:

• Employee Stock Purchase Plan (ESPP)
• Insurance plans with Outpatient cover
• Flexible work policy

DUTIES & RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Able to relocate to Dubai for Project duration, minimum 6 months.
• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Scope:

• Lead the design and development of engineering projects, ensuring compliance with specifications and standards
• Collaborate with cross-functional teams, including manufacturing, quality assurance, and project management
• Create and review detailed design drawings and models using CAD software
• Conduct design analysis and simulations to validate performance and reliability
• Mentor and provide guidance to junior engineers and design team members
• Manage project timelines and deliverables, ensuring adherence to schedules and budgets
• Coordinate with clients and stakeholders to gather requirements and provide technical support
• Identify and troubleshoot design issues, implementing effective solutions
• Stay updated on industry trends and emerging technologies to enhance design processes
• Prepare technical documentation and reports for project milestones and reviews

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• Over 5 years of experience in semiconductor equipment design
• Strong knowledge and experience in:
• Design of automation or semiconductor equipment
• High-speed pick and place mechanisms
• Familiarity with 3D Computer Aided Design software
• Ability to plan, prioritize, and coordinate projects effectively
• Self-motivated and capable of independent work, with strong communication skills
• Equipment troubleshooting skills
• Ability to produce detailed mechanical drawings and apply Geometric Dimensioning & Tolerancing knowledge

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Design Assistant

Your primary roles are to create 3D models for RISIS products (jewellery, lifestyle, and sculpture), to operate our Rapid Prototyping (RP) Machine, to do 3D scanning of RISIS products and to do any modifications on the 3D scanned models. You are required to work closely with the Designers (Sculpting, Jewellery & Lifestyle) to generate high quality 3D-printed models for visualization or production purposes. You must analyse, evaluate, and repair CAD models suitable for Additive Manufacturing. In addition, you may be tasked to design and model corporate gifts products to enhance your knowledge and skills so that you have a better understanding of the whole process from conceptualizing, developing, and producing premium gifts.

Key Responsibilities:

• To create 3D models based on 2D drawings.
• To be able to visualize, create and repair CAD files/data (.STL, .OBJ, .3DM).
• To generate 3D models as per specifications given, either by scanning or by using company-provided 3D modelling software within the required deadline.
• To generate 2D image renders for visualization based on 3D models.
• To operate and conduct regular maintenance of our Rapid Prototyping Machine.
• To liaise with suppliers on the purchasing of all necessary materials used for producing CAD models and other relevant 3D matters.
• To keep proper stock records, manage the sufficient supply and usage of all 3D related consumables.
• To keep a monthly maintenance logbook for the Rapid Prototyping Machine.
• To perform post-processes and provide high QC for 3D printed jobs.
• To maintain, update, and follow through 3D printing SOP to achieve the most optimal output and for the success of the 3D printing results.
• To perform preventive maintenance on the Rapid Prototyping Machine as and when needed to keep the machine always in ‘tip-top’ condition.

Other Responsibilities

• To support relevant sales department to do visuals for corporate project proposal.
• To co-ordinate and perform any tasks assigned by the Design Manager.
• To assist Designers with Design Order Form to relevant factories or suppliers when necessary

Requirements

• Diploma / degree in Fine Arts or related discipline.
• Preferably with 1–2 years of experience in similar capacity.
• Working knowledge of 3D design software packages.
• Ability to work well in a team.
• Meticulous and able to meet tight deadlines

This is 12 - months Contract (extendable + convertible)

Location: The Alpha, Science Park

Normal working hours

Essential Responsibilities:

• Carry out detail engineering task for water and wastewater treatment plant to full fill business obligation e.g. On-time delivery, Satisfy contract specification or industrial standard and bring value to customer. Work shall include but not limited to the following:
• Prepare sketches on P&IDs Drawing
• Prepare sketches on Fabrication Drawing
• Prepare sketches on Equipment Layout Drawing
• Prepare sketches on Pipe Routing Drawing
• Prepare equipment and material datasheet
• Perform equipment sizing calculation
• Perform pipe sizing calculation
• Perform hydraulic calculation
• Perform pipe stress analysis
• Perform material take off
• Raise purchase requisition
• Check and sign off engineering design
• Work together with in-house design team aboard to meet engineering deliverable.
• Contribute to value engineering to drive cost down.
• Evaluate vendor quote and provide input on vendor selection.
• Support business initiative to bid and win job as required.
• Support Project Management/ Construction Team on construction activities as required.
• Support Commissioning Team on commissioning activities as required.

Qualifications/Requirements:

• Bachelor Degree in Chemical/Mechanical/ Electrical Engineering
• Minimum 3- 5 years working experiences in design of water and wastewater
• Highly motivated and able to work under pressure
• Experience in construction, test and commission, and operation of water and wastewater plant is a plus point
• Well versed in MS Excel, MS Word, and MS PowerPoint
• Familiar in MS SharePoint, MS Team, and Naviswork
• Ability to operate AutoCAD and SAP is a plus point

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform you that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use, and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E

• EA License No. 01C4394

• Registration No. R23112260 (MayThinKyu)

Evaluates project information, confers and corresponds with client representatives in coordination with the

Project Manager/Principal to determine project parameters and requirements.

Develops design concepts for project(s).

- Leads design development of client’s interior program through development of photographic image studies.

- Develops interior design to meet the client’s programmatic requirements and assure technical suitability.

- Develops conceptual ideas graphically.

- Leads design charettes.

Participates directly in each project from programming through project completion.

Leads presentation and design drawings.

Be the creative head.

- Develops block plans and bubble diagrams.

- Leads and reviews design details.

- Corrects / revises drawings with minimal supervision.

Coordinates with design team to ensure integration of design and interior design elements.

- Provides guidance to other members of the design team to ensure that design documents are in appropriate formats.

- Participates in all charettes.

- Monitors and sometimes coordinates the design work of consultants.

Is responsible for quality control for the interior design function, including:

- Accuracy of each segment of work as it is completed.

- Conformance to company design standards.

Project Management

- Establishes program with Project Manager/Principal.

- Responsible for all projects within the team.

- Participates in determining the skills required of other team members for the project and the selection of those team members.

- Prepares progress reports. Alerts Project Manager to any changes in scope, lack of information or decisions from client.

Oversees interior design aspects of construction:

- Assists with construction oversight for general conformance with the interior design concept.

- Responds to construction questions as they relate to interior design issues.

Directs / supervises the gathering of the technical specifications for various interior design elements (FF&E).

- Selects and directs materials for project.

Confers and corresponds with client representatives, to determine project parameters / requirements; participates in design presentations.

Directs construction of finish boards.

Participates in the development of “in-house” design standards; assures that design policies, procedures, standards and philosophies are adhered to.

Responsible for personal and staff development

- Performs senior staff development duties such as mentoring, training, supervising and directing junior staff.

- Participates in management and leadership groups.

Job Description

• Prepare, manage, and facilitate design drawings utilizing BIM, Rino, Grasshopper and CAD technologies.
• Ensure all models are compatible and that BIM data is accessible to all project participants.
• Oversee coordination between architectural and structural interfaces, collaborating with main contractors and other trades for effective cross-team support.
• Work closely with the design team and other relevant departments to ensure all drawings meet design specifications.
• Manage design changes and revisions, addressing any discrepancies and queries between design and project teams.
• Attend site meetings as required and perform additional tasks as needed.

Requirements

• Degree in Architecture, Civil Structural Engineering, or a related field.
• Minimum of 4 to 5 years of relevant experience in construction and architectural projects.
• Proficiency in Revit, Navisworks, Rino, Grasshopper, AutoCAD, and MS Office.
• Knowledge of DGN, DWF, IFC, and MicroStation is a plus.
• Strong project management and decision-making skills.
• Ability to work effectively as part of a team as well as independently with minimal supervision.

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

About our client: Our client is a leading global engineering, procurement, construction & management company, delivering large-scale high-tech, and industrial building projects.

About the role: Support the design and construction management of various Civil and Structural Systems for industrial buildings, with a focus on concrete and steel structures. Assist in the development, design, and execution of these systems across multiple projects.

Responsibilities:
- Support Project Managers in delivering projects on time, within budget, and following quality standards.
- Prepare, issue, and assess tender packages for construction projects.
- Collaborate with Architectural, Process, Mechanical, Electrical, and Quantity Surveying teams to ensure design and construction alignment.
- Address and resolve site-related design issues efficiently.
- Communicate and coordinate with consultants and subcontractors to ensure smooth project execution.
- Manage timely submissions and approvals from relevant local authorities.
- Stay updated on the latest industry practices, engineering trends, and technical advancements to maintain a high level of competence.
- Undertake additional duties as assigned by management.

About you:
- Bachelor's degree in Civil Engineering.
- 3 to 5 years of experience in design and construction.
- Preferably with experience in industrial building design and construction, with a focus on precast structures and long-span roof trusses.
- Hands-on site experience in piling, sub-structure, and superstructure works involving reinforced concrete, steel structures, and precast elements.
- Experience collaborating with Process, Mechanical, and Electrical teams, as well as Quantity Surveyors.
- Proven ability to liaise effectively with consultants and contractors.
- Experience in reviewing shop drawings for precast and steel structures, and providing detailed design input for computer-aided design teams.
- Strong knowledge of element design based on relevant codes and standards.
- Proficiency with structural design software such as STAAD-Pro, Prokon, Orion, or similar tools (if applicable).

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507