Job Description:

1. Contribute to defining product specifications, microarchitecture, and implementation for high-speed memory interfaces.

2. Perform RTL coding, LINT checks, and initial testing of designs.

3. Collaborate with the verification team for debugging in the lab.

4. Work closely with the software team and/or customers to troubleshoot, debug, and optimize system performance.

Job Requirements:

1. Bachelor’s degree in Communications, Electronic, or Computer Engineering;

2. 6 of experience in ASIC design, with a strong understanding of the ASIC development process.

3. Proficiency in Verilog HDL coding and EDA tools for synthesis and timing analysis.

4. Experience with high-speed interfaces (e.g., DDR, SerDes, PCIe) is a plus.

5. Strong problem-solving skills and the ability to deliver results within deadlines.

6. Excellent organizational and communication skills.

Interested candidate please send your resume to [email protected]

Job Description:

1. Lead the team in designing, simulating, and documenting analog circuits and chip designs.

2. Oversee and optimize layout design and routing to enhance efficiency and quality.

3. Support product testing, debugging, and application development.

4. Mentor junior analog designers and prepare comprehensive design documentation.

Job Requirements:

1. Master’s degree or higher in Microelectronics or Electronic Engineering with over 10 years of relevant experience.

2. Expertise in designing analog mixed-signal circuit blocks, including bandgap references, bias circuits, LDO regulators, amplifiers, comparators, switched capacitor circuits, ADCs, DACs, oscillators, filters, Tx/Rx equalizers, and circuits like de-emphasis, CTLE, DFE, and CDR architecture, as well as high-speed digital components (serializers, deserializers, counters, dividers, etc.).

3. Proficiency in high-speed interface protocols such as PCIe, USB, SATA, DDR, and LPDDR.

4. Advanced knowledge of analog mixed-signal design, with experience in high-speed serial and parallel circuits using cutting-edge processes (e.g., 3nm, FinFET, SOI, bulk CMOS).

5. Extensive hands-on experience with design tools and static timing analysis tools (e.g., Nanotime).

6. Strong problem-solving skills and a proven ability to deliver results within tight timelines.

Interested candidate may send your resume to [email protected]

Piping Design Engineer

• Working Days: 5 days’ work week
• Working Hours: 8:15 am–6 pm (Mon-Fri)
• Office Location: Joo Koon
• Salary Range: S$ 2,500 - 3,500

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Responsibilities:
· Designing and detailing of Civil & Structural engineering works;
· Co-ordinating with clients’ representatives, Project Managers and Consultants Team from inception to completion of projects;
· Providing periodical site inspection and attending meetings during course of construction of projects; and
· Responsible for timely submission of reports and completion of projects for tender/submission with target dates.

Requirements:
· A recognised Degree in Civil/Structural Engineering by PEB;
· Minimum 1 - 2 years experience in a similar capacity;
· Procient in Civil and Structural Engineering software applications;
· Those with design experience will be an advantage;
· Positive attitude, self motivate and responsible;
. Fresh graduates are encouraged to apply.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Hi our Client is looking for a dynamic Chip Design Engineer to be part of their team.

Job Description

1. Design and implement high-speed memory interfaces and circuits.

2. Deliver AMS circuits in SerDes and evaluate circuit topologies.

3. Develop and optimize high-speed interface modules (e.g., bandgap, bias circuits,LDOs, ADCs, DACs, oscillators, filters, Tx/Rx equalizers, and serializers/deserializers).

4. Collaborate with the verification team to debug in the lab.

5. Work with software teams and customers to troubleshoot and enhance system performance.

Job Requirements:

1. Bachelor's in Communications, Electronic, or Computer Engineering;

2. Min 4 yrs working experience in ASIC design, with knowledge of the ASIC development process.

3. Proficiency in AMS circuit design and Electronis Design Automation tools.

4. Experience with high-speed interfaces (e.g., DDR, SerDes, PCIe) is a plus.

Interested candidate please email your resume to [email protected]

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

As part of our system Engineering team, you play a key role in the design and development of our Inspection and Metrology machines. In your role you will work hands-on on the mechanical integration, process optimization and automation of the machine. Your work will involve integration of the mechatronic, optical and software building blocks and will hence work closely together with Mechanical design, Hardware, Optics and software teams.

It is your job to analyze customer requirements, build up a deep understanding of the problem and translate these into automated solutions that you detail clearly in measurable design requirements. To verify the solutions, you will build and test high-speed mechatronic setups for spec validation and critical parameter analysis. Once these are confirmed, you will coordinate the design and implementation in the different teams to eventually integrate tested modules and building blocks in the machine and assess the impact of the integration on the overall machine performance.

You get the chance to confirm high speed Pick and Place handling capabilities at key customers on site and broaden your customer and application know how along the way.

Furthermore you seek the challenge of understanding, analyzing, (re-)defining, and implementing sophisticated material handling flows until the level of detailed micro-sequences.

You will often write PLC level test sequences for mockup validation and data collection. Once the system is validated, translate these sequences into SW requirements.

As a senior system Engineer, you are considered as project/product owner. That means, besides technical work, you will also lead a multi-disciplinary team on project/product basis. You need to consider both technical but also commercial (e.g. budget, timeline, resource) aspects while managing your project/product.

Minimum Qualifications

• MS degree or BS degree with outstanding skill in electro-mechanical, electronics, software or mechanical engineering; with sound knowledge on basic software logics
• 5+ years relevant experience in an automation oriented engineering role in a high-end equipment company, covering most of following technical domains: machine conceptual and mechanical design, setting up specifications, PLC controller hardware and software design, user interface, SW (describing, testing of flows), conversion, test protocols, debugging, characterization, lead improvement projects
• Strong analytical capabilities
• Programming skills are a plus (PLC controllers, C, C++ Python, VBA, …)
• Independent thinking, challenging existing ideas and approaches
• Hands-on, self-organized, taking initiative and ownership
• Occasional travel within Asia & Europe
• Proficient in English

Mechanical Design and System Integration: Lead the mechanical design of UPW and

wastewater treatment systems, including the selection and sizing of equipment such as

process vessels, pumps, compressors, heat exchangers, dewatering devices, and other

mechanical components. Ensure seamless integration of these components into the overall

treatment system.

ØEquipment Specification and Procurement: Prepare technical specifications for mechanical

equipment and work with vendors to procure the required components. Evaluate equipment

proposals and make recommendations based on technical and budgetary considerations.

ØProject Planning and Execution: Collaborate with project managers and other engineering

disciplines to plan and execute UPW and wastewater treatment projects. Participate in project

meetings, design reviews, and progress assessments to ensure project objectives are met.

ØMechanical Engineering Analysis: Perform engineering calculations, simulations, and

modeling to assess the performance and reliability of mechanical systems. Address technical

challenges and propose solutions to optimize system performance.

ØQuality Control and Compliance: Ensure that all mechanical designs and installations comply

with applicable codes, standards, and industry best practices. Conduct quality control reviews

to verify design integrity and safety.

Ø Cost Estimation and Budget Management: Collaborate with the project team to prepare cost

estimates for mechanical components and equipment. Identify cost-saving opportunities

where applicable.

• Responsible for handling client and consultant, coordinate with consultants, client, and authorities for design matters.
• Assist in project planning, programming, implementation, monitoring, and coordination including quality, construction and cost management
• Oversee the shop drawings submissions and issuance, planning and control delivery of design schedule, monitoring the progress. Ensure projects are carried out according to approved drawings, specifications and standards, schedule and budget.
• Internal coordination with the construction and other departmental teams for their requirements, provisions.
• Manage a team of civil design engineers in design coordination & BIM Modellers

• Degree/ Master in Civil Engineering
• Minimum 10 years of Engineering experience with Degree in Civil Engineering recognised by PE Board
• Prefer with LTA project background
• Leadership

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

You will be a key product developer for our Counter-UAS products for the local and overseas markets. Working closely with the Solution Architect, Project Manager and Technical Lead, you will be part of a product development team to design and develop our RF sensing and jamming products as part of the Counter-UAS product lines.

Be Part of Our Success

· Plan, execute, monitor, and control the various RF designs of the products

· Well verse in RF link budget calculation

· Specialized in software defined radio technology to design, develop and optimized RF frontend systems for SDR applications

· Proficient with tools such as MATLAB, GNU Radio and SPICE simulator and other electromagnetic simulation software packages

Qualities We Value

· Experience in Windows server OS, Unix/Linux OS & VM environment

· Experience in product development

· Good knowledge with SDR, RF receiver and power amplifier designs

· Strong interpersonal and communication finesse

· Proactive problem-solving prowess

· Ability to adapt to evolving technologies and industry best practices

· Singaporean Only

· Location: Jurong East

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

THE ROLE:

We are looking for an adaptive, self-motivative design verification engineer to join our growing team. As a key contributor, you will be part of a leading team to drive and improve AMD's abilities to deliver the highest quality, industry-leading technologies to market. The Verification Engineering team furthers and encourages continuous technical innovation to showcase successes as well as facilitate continuous career development.

THE PERSON:

You have a passion for modern, complex processor architecture, digital design, and verification in general. You are a team player who has excellent communication skills and experience collaborating with other engineers located in different sites/timezones. You have strong analytical and problem-solving skills and are willing to learn and ready to take on problems.

KEY RESPONSIBILITIES:

• Develop/Maintain tests for functional verification and performance verification at the core level
• Build testbench components to support the next generation IP
• Maintain or improve current test libraries to support IP level testing
• Write tests, sequences, and testbench components in SytemVerilog and UVM along with formal to archieve verification of the design.
• Reponsible for verification quality metrics like pass rates, code coverage and functional coverage.
• Write testplan and review with design and architecture team.

PREFERRED EXPERIENCE:

• Strong experience in SystemVerilog and UVM verification framework.
• Experience Perl and Python scripts.
• Experience/Background on SerDes, PCIe, Ethernet.
• Experience with VCS, Cadence and Mentor Graphics.

ACADEMIC CREDENTIALS:

• Bachelors or Masters degree in computer engineering/Electrical Engineering

LOCATION:

Singapore

#LI-MM1

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Responsibilities:

• Prepares engineering information required for the production departments and to execute activities within schedule.
• Coordinates interdisciplinary and subcontracting activities where required.
• Reviews supplier / sub-contractors design deliverables.
• Prepares project documentation for submission and for production works using PLM
• Prepares design and production drawings such as main cable routings, cable tray layout, cable schedules, electrical diagram and etc.)
• Coordinates with other engineering team members (i.e. within shipyard engineering department, production, QC, etc.), subcontractors and consultants on technical issues
• Prepare outfitting material and electrical fittings for vessel to project technical requirement specifications
• Prepares arrangement and bill of material for outfitting and equipment supports for the procurement.
• Provides updates to production and project team members on all aspects engineering deliverables to support yard’s fabrication and installation activities

Requirements:

• Diploma in Electrical or Mechanical Engineering or any other related engineering disciplines
• Minimum 2 years of working experience in Electrical and Instrumentation design and/or engineering in the oil and gas industry
• Experience in electrical related design and marine vessels added advantage
• Proficient in engineering office software and CAD tools such as AVEVA or equivalent
• Able to work overtime where project has requirement.

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

You will be a key product developer for our Counter-UAS products for the local and overseas markets. Working closely with the Solution Architect, Project Manager and Technical Lead, you will be part of a product development team to design and develop our RF sensing and jamming products as part of the Counter-UAS product lines.

Be Part of Our Success

· Plan, execute, monitor, and control the various RF designs of the products

· Well verse in RF link budget calculation

· Specialized in software defined radio technology to design, develop and optimized RF frontend systems for SDR applications

· Proficient with tools such as MATLAB, GNU Radio and SPICE simulator and other electromagnetic simulation software packages

Qualities We Value

· Experience in Windows server OS, Unix/Linux OS & VM environment

· Experience in product development

· Good knowledge with SDR, RF receiver and power amplifier designs

· Strong interpersonal and communication finesse

· Proactive problem-solving prowess

· Ability to adapt to evolving technologies and industry best practices

· Singaporean Only

· Location: Jurong East

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

We are looking for highly dynamic and qualified individuals who are hands-on with a keen interest in the Interior Design Industry.

Successful candidate/s shall manage and expand existing customer accounts, strategize, and develop new business channels, enhance customer experience and address customers’ needs.

Responsibilities

• Creating design briefs based on the client’s requirements and vision.
• Ensuring that the design meets clients’ specifications, industry standards, and legal requirements.
• Shoulder the responsibility of the quality and completion of all work projects assigned to members of the creative team.
• Ensuring that projects are completed within time, scope and budget and in accordance with stakeholders’ expectations.
• Managing client relationships and serving as a liaison between designers, inter-department, vendors and clients
• Providing feedback on design ideas to improve upon or identifying potential problems that could be resolved in advance.
• Establishing and maintaining design standards of the company.
• Reviewing design for accuracy and appropriateness, identifying problems with them, and suggesting changes and implement solutions
• Deciding on the layout for publications or product designs and choosing visuals like photographs, artwork, graphics and designs
• Report the progress of projects at major stages of their conception, creation, and execution
• Participate in and provide regular opportunities for professional development and growth to team
• Mentor and encourage creative team members to foster a positive work environment
• Nurturing a work environment that is conducive to creative thinking.

Requirement

• Min. Degree in Business, Art/Interior Design, Architecture, Marketing or above.
• Experience in commercial space is a MUST.
• Demonstrate account cultivation and leads generation regionally.
• Driven to consistently meet and exceed goals set by management.
• PC skills and knowledge of windows esp. MS. Office.
• Good communication and interpersonal skill with all level of people regionally.
• Reliable, responsible and willingness to take on new challenges.

Who We Are

At OKX, we believe the future will be reshaped by technology. Founded in 2017, we are revolutionising world systems through our cutting-edge digital asset exchange, Web3 portal and blockchain ecosystems. We reshape the financial ecosystem by offering some of the most diverse and sophisticated products, solutions, and trading tools on the market. Trusted by more than 50 million users in over 180 countries globally, OKX empowers every individual to explore the world of Web3.

With our extensive range of products and services, and unwavering commitment to innovation, OKX envisions a world of financial access backed by blockchain and the power of decentralized finance.

We are innovative in the way we think, work, and in the products we create. We are also socially responsible by actively participating and encouraging employees to take part in various public welfare activities. With more than 3,000 employees around the world, we believe embracing diversity and inclusion will spark the creation of long-term value for the industry. Come Build the Future with Us now!

About the job

Our mission is to help the next billion people experience the future of finance. We're looking for Product Designers to help define the future of our products, set strategies, and develop a culture of excellent user experience in all areas where we interact with customers.

OKX is building mobile-first products and features that cater to retail investors as we evolve the business beyond the core trader customer base. We have made it easier to buy and sell crypto and provide access to passive income earning opportunities, but we need to continue innovating and rounding out the retail offering. OKX is seeking a Product Designer to join us on this quest to make crypto accessible to everyone.

As a Product Designer on the Experience team, you will own the core transaction workflows, display of data and key features from strategy through to execution. You will craft experiences based on research, data and insights that delight millions of customers worldwide.

This is an exciting opportunity to deliver exceptional experiences to our customers and help refine core transaction workflows, display of data and key features from strategy through to execution. Join a highly collaborative team and realize autonomy, ownership, and a significant impact across our products reaching millions of customers worldwide. You will work with the cross-functional Product & Engineering teams to deliver the best experiences for our customers.

What You'll Be Doing

• Synthesize needs from Product, Engineering, and Marketing into comprehensive design deliverables, ensuring design is front-of-mind throughout the product development process

• Work through design problems from beginning to end: translating research insights into ideas that form disruptive new products and features, then designing the workflows and detailed interactions to realize them

• Support the product development process with wireframes, user flows, journey maps, high- fidelity mockups, interactive prototypes, and evaluative research

• Partner with cross-functional peers within Product and Engineering in Asia and internationally to define initiatives and create thoughtful solutions representing design and being the voice for the user throughout the product lifecycle

• Collaborate closely with UX Research, UX Writing, Brand, and Product leadership to shape the overall design vision of your area of ownership

• Consistently elevate the quality of the design by soliciting feedback from peers and stakeholders through formal Design Reviews, presentations and by facilitating design thinking workshops

• Mentor other designers throughout the organization on craft, quality, experience, and processes.

• Work with data, whether qualitative or quantitative to make informed design decisions

What We Look For In You

• 6+ years of relevant industry experience in a Product Design, Interaction Design, or UX Design role

• Demonstrate strong communication skills, as well as the ability to explain ideas and advocate for design decisions

• Experience collaborating with cross-functional teams of Designers, Product Manager, Engineers, UX Writers, and Researchers

• Familiarity designing for multiple platforms including native and responsive design

• Deep knowledge and application of customer-centric thinking and user centered design methodologies to ensure experiences are accessible and based on customer needs

• Expertise with facilitating discussions and/or workshops to help foster alignment, influence product goals and requirements and generate ideas

• Comfortable facilitating design thinking workshops or design sprints with peers, stakeholders, and leadership

• Passionate about resolving user pain points through incredible, beautiful, intuitive designs

• Strong information architecture knowledge

• Strong understanding of experimentation and moderated research techniques using qualitative or quantitative data to inform and measure the impact of the work

Nice to Naves

• Bachelor's degree in Design, HCI, or equivalent practical experience

• Experience designing for Fintech, Investment platforms, or Crypto products

• Experience working with global teams across offices and timezones

• A desire to mentor cross-functional peers and evangelize for great design
Perks Benefits

• Competitive total compensation package

• Learning & Developmen programs and Education subsidy for employees' growth and development

• Various team building programs and company events

• Wellness and meal allowances

• Comprehensive healthcare schemes for employees and dependants

Main contractor in civil engineering seeking for :-

Roles & Responsibilities:-

· Manage a team of civil design engineers in design coordination & BIM Modellers

· Conduct technical meetings and liaise closely with consulatnts

· Handle design submissionto BCA/LTA/PUB

· Coordinate all related design matters with consultants & Clients

· Responsible for checking accuracy of calculation, drawings and proposal

· Provide alternative design to meet better construction operation

Requirement:-

• Degree/ Master in Civil Engineering
• Minimum 12 years of Engineering experience with Degree in Civil Engineering recognised by PE Board
• Prefer with LTA project background
• Leadership

Overview

Are you a passionate and creative hands-on Graphic Designer with an eye for aesthetics? Are you keen to leave your fingerprint in each project you handle? Then P&G Digital Commerce is the place for you!

We are seeking a graphic designer for our e-commerce business across Asia, Middle East & Africa, who can bring to life brand identity across Digital Commerce execution for our portfolio of well-known brands such as Pampers, Pantene, Downy, Gillette, Oral-B and more!

Your Team

You will work in a team of in-house designers, report into a marketing leader, and work closely with multi-functional marketing and sales team.

Key Responsibilites

1. Design and develop creative digital solutions in partnership with the brand and sales team including:

• Evolve look and layout of e-commerce brand and campaigns pages
• Design new marketing campaigns based on multi-brand executions or existing brand design codes
• Develop simple, social-ready short videos and motion graphics (e.g. animated GIFs)
• Banner adjustment (resize, change a copy on existing banners)
• Amend final designs per comments and gain full approval

2. Identify how to win with design as the business enters new countries, platforms requiring new creative formats

3. Lead design quality approval processes

Requirements

• Degree in Graphic Design or similar fields
• A portfolio based on 1-2 years industry experience that will be assessed on creative excellence, storytelling, problem solving and technical mastery.
• Please submit a graphics portfolio or website together with your application.
• Software proficiency in the latest graphics and business programs: Adobe CS (Photoshop, Illustrator, InDesign, Acrobat), Social-Ready Video Editing Software (Premiere Pro, CapCut) and Microsoft (Outlook, PowerPoint, etc.).
• Strong design mastery and ability to solve problems using design skills, preferably experience in design in a consumer goods business context.
• High bar for quality, especially for aesthetics and in layout creation.
• Good collaboration & design skills with proven experience to effectively bring design strategy all the way to execution while fully articulating the target consumer and business needs
• Ability to handle multiple projects and manage complexity with excellence. Shown discipline, priority setting in managing and leading complex projects with efficiency, from design strategy, consumer and customer understanding and timeline management
• Great sense of creativity and eye for beauty, needs to be flexible in an environment of constant change. Engage and influence senior management and cross-functional partners. Develop strong credibility at all levels of the organization.

Design & Specifications Management

• Responsible for the design submission, shop drawings, standard details and calculations etc.
• Lead and conduct front end engineering and design works including conceptual and feasibility studies.
• Reviewing of design, specifications & drawings in the construction projects to drive cost savings through improvements in construction methods, sequence and/or material used, and to resolve technical issues at the upstream flow during the design and planning stage before the projects were executed.
• Attend technical/design clarification and project meetings with the vendors and the subcontractors with regards to the combine services drawings to ensure no conflict.
• Develop and manage the design approval process with subcontractors, consultants and clients in a timely manner.
• To report on the design submission to client and undertaking DAR submission.

Budget & Schedule Management

• Establish and track the development of design deliverables against procurement schedule and budget, ensuring on-time completion, and coordinating all.
• Identify and highlight any potential design risks or issues that will impact Project Performance.

Requirements:

• Possess Diploma / Degree in Mechanical Engineering or relevant
• Minimum 5 years of working experience.
• A team player with a strong analytical mind and ability to work independently.

What you’ll do

· Direct and oversee Professional Consultants (Architects, Engineers) and Equipment Suppliers.

· Apply DLR Design & Engineering Guidelines / Standards to all projects to assure that standards are up-to-date with industry best practices and meet Company’s business objectives (emphasis on value-engineering).

· Assist in the preparation and review of budgets and forecasts related to anticipated design and construction expenditures.

· For Build-to-Suit projects, act as the primary customer contact for the development of customized data center development projects. This will include leading the consultant team, preparing detailed development of work letters including program (scope), budget (emphasis on value-engineering) and documents to support DLR leasing activities.

· Develop and maintain vendor relationships (Contractors, Architects, Engineers, Consultants, etc) to provide cost-effective services for DLR projects.

· Preparation of requests for proposals (RFP). Evaluation of proposals and recommendations to management regarding vendor selection.

· Communicate status of projects to both internal and external stakeholders on an ad-hoc and formal basis. Prepare monthly project reports regarding the budget, schedule, and scope objectives of assigned projects.

· and many more....

What you’ll need

· Bachelor's degree in a related discipline. Professional License (Engineer/Security) desired.

· Demonstrated project management experience of technically complex projects (typically 10 years of experience). Ability to direct and manage internal and external resources.

· Able to understand and interpret design drawings, construction drawings, construction specifications, design and construction contracts, project schedules, and detailed budgets and estimate summaries.

· Excellent understanding of advanced electrical, mechanical, security/monitoring, and fire detection/suppression systems.

· Comprehensive knowledge of standard practices in the design and construction industry.

· General knowledge of design and construction terms and principles and contracts.

· Familiarity with basic building code requirements.

· Excellent organizational skills and attention to detail.

· Flexibility; openness to new ideas and procedures.

· Computer literate in the use of MS Office software and AutoCAD.

· Excellent verbal and written communications skills.

· Excellent presentation skills.

· Strong interpersonal skills.

· Financial acumen to recommend, review and analyze budgets and estimates.

· Strong problem solving and analytical skills. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.

· Able to work independently, when required; able to work collaboratively, when required.

· Able to work across functional groups and with all levels of employees.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Key Responsibilities:

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.
• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.
• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Qualifications and Skills:

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel overseas as required.

Interested and suitable candidate kindly click quick apply. Resume will be forwarded to Stepfan Soon Yit.
We regret that only suitable candidate will be notified.

GEMS Recruit/EA License : 23C1459
EA Personnel No : R24120893 (Stepfan Soon Yit)