• Position : Project Manager (Construction / Interior Design/ Furniture Industry)
• Location : Toa Payoh Industrial (Bus stop nearby)
• Working hours : 5.5 days a week - Monday to Friday from 9am to 6pm / Sat from 9am to 1pm
• Salary (commensurate with experience) : Basic up to $5600 + $300 Transport Allowance if owns a vehicle + Performance Bonus + 14 Days Annual leave
• Duration : Permanent
• Industry : Interior Fit-out Industry

Main Responsibilities:

• Planning/Controlling/Monitoring/Managing & Directing the assigned project resources to best meet project objective.
• Ensures all changes to specifications, work scopes, and drawings are properly documented.
• Efficient management of resources and materials
• Responsible for project and site supervision, attend site meetings, coordination with sub-contractors, suppliers, consultants and clients and all scope of work that is required in the smooth implementation of a successful project development.
• Assist in resolving any issues or challenges that may arise during the project execution.
• Conduct regular site inspections and quality control checks.
• Ensure compliance with safety regulations and industry standards.
• Collaborate with internal teams to ensure successful project delivery.
• Manage material at the construction site to ensure zero wastage and no overstock of material.
• Manage manpower and overtime costs to ensure optimal cost-benefit within or below budget.
• Coordinate and communicate with project teams, subcontractors, and suppliers.
• Ad hoc duties as assigned.

Requirements:

• Min 3 years of relevant experiences in Interior Fit-out Industry
• Minimum higher NITEC / Diploma holders or candidates with relevant experience and proven track records will also be considered.
• Experience in Construction / Interior Design/ Furniture Industry will be an added advantage.
• Able to start work within short notice preferred.

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

JOB TITLE: SUBJECT TEACHER (DESIGN & COMPUTER SCIENCE)

Links to: Learning Area Leader, SLT Link Person

WHO ARE WE?

Nexus is an empowering, learning-focused community. We strive to create an honest, open and innovative community with our learners, parents and peers. We believe that we have something unique and special here, and we are proud to be different in the way we work and how we teach and learn.

At Nexus, we do things differently. Each member of staff is valued and recognised as a unique individual collaborating as part of a supportive community to elevate one another with innovative ideas. Our strategies emerge from the collective positive mindsets of our colleagues. You will experience high levels of ownership and empowerment in your role.

JOB DESCRIPTION

Subject teachers are informed, reflective practitioners who use inquiry-based teaching strategies to create positive learning environments that motivate and challenge learners to become proactive, life-long learners and leaders.

As a member of our Design and Computer Science team, you will be teaching groups of learners between years 7 to 13 (ages 11 to 18). We deliver the IB MYP, IGCSE (Edexcel), and IBDP across the Secondary school.

ROLE AND RESPONSIBILITIES

Employing effective pedagogy that enables children to become successful and self-regulated learners who achieve personal excellence by:

• Building learning-focused relationships;
• Empowering children to become independent learners;
• Using appropriate assessment tools for formative and summative assessment;
• Using assessment information to plan progression;
• Providing high-quality scaffolding and feedback to learners;
• Encouraging learners to reflect on their learning;
• Engaging learners in setting learning goals;
• Involving parents in their children’s learning through learner-led conferences and regular parent-teacher dialogue;
• Employing and integrating IT to enhance learning;
• Supporting learners to solve authentic problems related to real-world situations;
• Collaborating positively within a team and across teams;
• Meeting the Nexus Teacher Professional Standards, aspiring to grow and develop and being committed to professional learning;
• Involvement in whole-school events and activities as required;
• Working with learners as a form tutor as assigned, helping them set and achieve personal goals.

QUALIFICATIONS AND SKILLS

• A recognised teaching qualification
• Bachelor’s degree (or higher qualification) in Design Technology, Computer Science, Education, or a related field
• Familiarity with tools such as Python, Scratch, CAD software, Micro:Bits, Audino and robotics platforms
• Ability to teach a range of technical skills, including programming, graphic design, and prototyping
• Experience working with bilingual and multilingual learners and learners with diverse needs
• At least 2 years of relevant experience in an international school environment where the school curriculum focused on IBMYP, IGCSE or IBDP (preferred)

Nexus International School (Singapore) is committed to the safety and wellbeing of our children and families. Nexus endorses the Convention on the Rights of the Child, which Singapore ratified on 11 December 2008, and establishes a clear policy and guidelines to protect our learners from maltreatment by any person or persons who come in contact with them in any environment.

Nexus International School (Singapore) is an equal opportunity employer. We respect and seek to empower each individual and value the diverse cultures, perspectives, skills and experiences within our school.

Whilst every effort has been made to explain the main duties and responsibilities, the role may be revised from time to time.

Interested candidates may apply via https://careers.taylors.edu.my/job-invite/3966/

• Handle the design team to achieve targets for the Civil engineering, Geotechnical engineering, Infrastructural design works.
• Lead consultant and review their design to ensure to meet the relevant requirements and the project’s preference.
• Discuss the design results to the client and other stakeholders and obtain their agreement.
• Enhance the design to reduce cost and construction schedule effectively.
• Finish all design works including necessary approvals without adversary affecting the tender/construction schedule.

Requirements:

• Degree in Civil Engineering recognized by the PE Board
• At least 7 years of marine civil design experience in a large-scale project.
• Good knowledge in international and domestic standards for design work.
• Experience in marine structure D&B plant project and overseas ODA project is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

Role Summary

You will be an integral part of the Marketing Team and assisting in Design scope for our marketing projects. The successful intern will be attached to a mentor to maintain processes and assist with marketing day to day operations. You will be given the opportunity to get a head start in Marketing and gain exposure to working in one of Singapore’s largest Air-conditioning & Consumer Electronics Retailer and Service provider. Here at Gain City, we value Service Connection as the top core value in everything we do, and we welcome you to be a part of our big team of 800+ staff and counting!

Responsibilities:

• Work closely with creative team to adapt creative artworks, designs, signage and other display materials
• Design marketing print collaterals (e.g. posters, brochures, advertisements and label design)
• Develop digital assets such as animation, GIFs, flash, eDMs, digital banners and websites etc
• Prepare simple marketing materials
• Content Creation for social media brand pages
• Align designs specifications according to brand requirements and guidelines
• Prepare appropriate working files for digital/print/production
• Other Ad-hoc duties as assigned

Requirements:

• Understudy in Graphic Design
• Proficient in Adobe Creative Suite, Microsoft Suite, After Effects, Premiere Pro
• Students with photography, video editing & motion graphics skills will be a bonus
• Have an eye for details and aesthetics
• Ability to work in a fast paced environment
• Applicants must be Singaporean/PR and a full-time student pursuing an undergraduate degree or diploma from any of the following eligible institutions (NYP, NP, RP, SP, TP, NTU, NUS, SUSS, SIT, SMU,

• Position : Project Manager (Construction / Interior Design/ Furniture Industry)
• Location : Toa Payoh Industrial (Bus stop nearby)
• Working hours : 5.5 days a week - Monday to Friday from 9am to 6pm / Sat from 9am to 1pm
• Salary (commensurate with experience) : Basic up to $5200 + $300 Transport Allowance if owns a vehicle + Performance Bonus + 14 Days Annual leave
• Duration : Permanent
• Industry : Interior Fit-out Industry

Main Responsibilities:

• Planning/Controlling/Monitoring/Managing & Directing the assigned project resources to best meet project objective.
• Ensures all changes to specifications, work scopes, and drawings are properly documented.
• Efficient management of resources and materials
• Responsible for project and site supervision, attend site meetings, coordination with sub-contractors, suppliers, consultants and clients and all scope of work that is required in the smooth implementation of a successful project development.
• Assist in resolving any issues or challenges that may arise during the project execution.
• Conduct regular site inspections and quality control checks.
• Ensure compliance with safety regulations and industry standards.
• Collaborate with internal teams to ensure successful project delivery.
• Manage material at the construction site to ensure zero wastage and no overstock of material.
• Manage manpower and overtime costs to ensure optimal cost-benefit within or below budget.
• Coordinate and communicate with project teams, subcontractors, and suppliers.
• Ad hoc duties as assigned.

Requirements:

• Min 3 years of relevant experiences in Interior Fit-out Industry
• Minimum higher NITEC / Diploma holders or candidates with relevant experience and proven track records will also be considered.
• Experience in Construction / Interior Design/ Furniture Industry will be an added advantage.
• Able to start work within short notice preferred.

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Location: Redhill

Basic + Commission + VB

JD:

• Research market trends, competitor offerings, and emerging client needs within sectors like commercial office/Retail design & renovation
• Proactively seek out and generate new business leads through networking, events, industry associations, cold call and referrals.
• Draw up networking proposals customized to individual sector
• Liaison between client, designer and other parties leading up to the securing of project, while ensuring client’s requirements are met and exceeded
• Prepare sales and marketing materials
• Work on project pricing, contracts, and fee negotiations that balance profitability with competitive positioning.
• Achieve and Deliver Sales Target
• Support in all aspect of Sales activities
• Manage and maintain clientele relationship
• Collate and evaluate client feedback and highlighting client feedback from customers for management analysis and follow-up

Requirement

• Diploma in Marketing, Business, Interior Design, or a related field.
• Min 3 years of experience in Business development, preferably in the interior design on commercial office/retail.
• Strong communication and interpersonal skills, with an ability to understand design concepts & to liaise with individuals at all level
• Committed, sales target driven and self-motivated
• Responsible and team player.
• Creative mindset with a passion for interior design.
• Excellent networking & communication and negotiation skills, with the ability to liaise with individuals at all level
• Committed, sales target driven and self-motivated

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

· Responsible for preparing and modifying schematic, detailed, and production drawings for precast concrete components, steel moulds, and reinforced concrete (RC) structures.

• Responsible for creating 2D and 3D presentations and design drawings, while developing solutions to technical and design challenges in compliance with Singapore's established standards.
• Responsible for compiling data and performing basic design computations.
• Participate in client liaison, authority consultations, coordination with consultants and subcontractors, and attend design and construction meetings.

Requirements:

• Diploma or Degree in Civil Engineering
• At least 5 years of related working experience
• Experience in checking Precast Concrete Shop Drawings and working with Precast Concrete Supplier Design Team

If you are interested, please send in your updated resume by clicking “Apply now” or email to [email protected]

Lim Siew Hua

Registration Number: R1984199

Workstone Pte Ltd

EA License Number: 19C9998

(Only shortlisted candidates will be notified.)

HEAD OF DESIGN (EVENT)

Company background: One of Singapore's established event management company specializing in conceptualisation, production and management of small to large-scale events, conferences and exhibitions.

Location: Central (Bukit Merah)

Working Hours: 5 Days Work Week, Mon to Fri (10am to 6.30pm)

Remuneration Package:

• Basic up to S$ 8000
• AWS
• Project Incentive
• Profit Sharing

Job Responsibilities:

• Drive innovative design concepts and themes for luxury and lifestyle events and exhibitions
• Design and produce creative 3D renderings, highly detailed layout plans, elevation drawings and technical drawings
• Lead and inspire a team of designers and oversee the design workflow for events and branded exhibitions (3D renderings, layouts, technical drawings and shop drawings)
• Projects allocation for the design team to ensure efficient turnaround
• Work closely with account servicing team and production team in ensuring design aligns with client’s requirements, and ensuring budget alignment for designs
• Communicate closely with vendors and contractors
• Attend site visits and inspections to assess venue requirements and develop spatial layouts and designs that optimize the attendee experience
• Able to manage personal workload, delegate tasks to design team effectively, prioritize team workloads, and oversee project timeline to ensure timely delivery of design deliverables
• Managing workflow with external freelancers when specialized skills or additional resources are needed

Requirements:

• Bachelor’s or Master’s Degree in Interior Design, Exhibition Design, or a related field
• Minimum 7 years of experience in lifestyle, luxury, fashion, or experiential event design
• Advanced skills in spatial planning, 3D modelling, and visualization, with expertise in photorealistic rendering techniques
• Proven track record in leading and managing creative teams; strong leadership and mentorship abilities
• Good understanding of clients’ brand strategy and design alignment for luxury and lifestyle brands
• Excellent communication and presentation skills
• Proficiency in 3ds Max, Adobe Creative Cloud software, SketchUp, and AutoCAD

Please be notified that only shortlisted candidates will be notified.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

About Us

The Lindner Group is Europe’s leading manufacturer and contractor for the building envelope, interior fit-out and insulation. With a workforce over 8000, Lindner operates numerous production facilities and subsidiary companies in more than 20 countries from our main office in Arnstorf, Germany.

Lindner Facades Asia Pte Ltd (LFA) was successfully re-launched in May 2019, as part of the Lindner Steel & Glass operation. Located in Singapore, LFA will be used as a base to promote and secure projects for LFA and Lindner Group in the vast and promising Asian market.

Our projects will cover the Asian markets, which include India, Philippines, Indonesia, Malaysia, Myanmar, Thailand and Vietnam. Enquires have also been received from Cambodia, Bangladesh and Sri Lanka.

LFA offers pre-sales consultation and planning advice, design and engineering, project management and planning, fabrication and installation. Employing a team of highly skilled, well-trained and extensive experience when it comes to LFA’S unique selling point in delivering turnkey projects with complex steel and glass, facades, skylights, curtain wall and building envelopes.

Due to rapid growth, we are seeking an experienced Design Manager cum Team Leader to strengthen our technical team. This is a full-time position, and it is perfect for someone with rich façade design knowledge and passionate about managing roles.

Job Responsibilities

· In charge of Design Team to carry out façade design works.

· Organize and plan a design works to meet construction schedule.

· Provide leadership and manage the team members in a professional manner, e.g., allocation of work, providing guidelines to them in drafting to maintain the quality, improving productivity, checking drawings and cutting list profiles etc.

· Ensure design, drawings, and all other deliverables meet the standard requirements, specifications and within scope of works.

· Identify additional work/variations to the Project Manager / Contract Manager for processing/approval of the variation order.

· To coordination between Design Team, Consultants, Main Contractor and other contractors.

· Assist site team in resolution of site clashes.

· Participate in workshops and lead, review and comment of shop drawings in terms of constructability, sequencing and ensure quality of the design is maintained throughout.

· Manage the design change process to ensure minimal impact to project schedule and minimize cost impacts as a result of such design change.

· To resolve any unforeseen interface problems throughout the various design phases.

Job Requirements

· Required skills: design development, design management.

· Knowledge and skills in Revit and Rhino are advantage, at least is able to read and extract information from 3D models prepared in Revit or Rhino format.

· Possess good communications and people skills

· Good organization, coordination and leadership skills

· Minimum 5 years working experience in façade design

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will have the opportunity to develop unconventional ultrasound transducer drivers, receiver circuits for IoT and biomedical applications as well as cutting-edge high-speed analog circuits for advanced optical communication.

Role & Responsibilities

• Design and tapeout circuit blocks e.g. high linearity low-noise amplifier, variable gain amplifier, envelop detector, and high voltage driver for MEMS ultrasound transducers.
• Work together with team on system integration and demonstration.
• Work together with team to investigate novel circuit/system solutions to create new inventions.

Requirements

• Master’s / PhD degree in Electrical Engineering or equivalent
• Minimum 2 years of transistor-level analog circuit design experience
• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Design experience with high voltage BCD process would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working days: Monday - Friday + *Alternate Half Sat WFH (if busy)
Working hours: 9am - 6pm
Location: Marina Square (Promenade MRT)
Salary: $3000 - $4000

Responsibilities:

• Provides CAD design services in support of client requirements and modifications.
• Updates and issues CAD space plans.
• Generates component breakdown for the sales department for quotations and orders.
• Provides 3D rendering for presentation.
• Prepares presentation boards.
• Site audit on existing components, and communicate churn requirements to the customer.
• To measure the site for space planning.
• Assists and coordinates mock-up preparation.

Requirements:

• Candidate must possess at least a Diploma certificate.
• Design and system furniture background experience would be preferred.
• Must be proficient in AutoCAD operation and 3D Modeling.
• Must understand drawing standards.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

About Us

The Lindner Group is Europe’s leading manufacturer and contractor for the building envelope, interior fit-out and insulation. With a workforce over 8000, Lindner operates numerous production facilities and subsidiary companies in more than 20 countries from our main office in Arnstorf, Germany.

Lindner Facades Asia Pte Ltd (LFA) was successfully re-launched in May 2019, as part of the Lindner Steel & Glass operation. Located in Singapore, LFA will be used as a base to promote and secure projects for LFA and Lindner Group in the vast and promising Asian market.

Our projects will cover the Asian markets, which include India, Philippines, Indonesia, Malaysia, Myanmar, Thailand and Vietnam. Enquires have also been received from Cambodia, Bangladesh and Sri Lanka.

LFA offers pre-sales consultation and planning advice, design and engineering, project management and planning, fabrication and installation. Employing a team of highly skilled, well-trained and extensive experience when it comes to LFA’S unique selling point in delivering turnkey projects with complex steel and glass, facades, skylights, curtain wall and building envelopes.

Due to rapid growth, we are seeking an experienced Design Manager cum Team Leader to strengthen our technical team. This is a full-time position, and it is perfect for someone with rich façade design knowledge and passionate about managing roles.

Job Responsibilities

· In charge of Design Team to carry out façade design works.

· Organize and plan a design works to meet construction schedule.

· Provide leadership and manage the team members in a professional manner, e.g., allocation of work, providing guidelines to them in drafting to maintain the quality, improving productivity, checking drawings and cutting list profiles etc.

· Ensure design, drawings, and all other deliverables meet the standard requirements, specifications and within scope of works.

· Identify additional work/variations to the Project Manager / Contract Manager for processing/approval of the variation order.

· To coordination between Design Team, Consultants, Main Contractor and other contractors.

· Assist site team in resolution of site clashes.

· Participate in workshops and lead, review and comment of shop drawings in terms of constructability, sequencing and ensure quality of the design is maintained throughout.

· Manage the design change process to ensure minimal impact to project schedule and minimize cost impacts as a result of such design change.

· To resolve any unforeseen interface problems throughout the various design phases.

Job Requirements

· Required skills: design development, design management.

· Knowledge and skills in Revit and Rhino are advantage, at least is able to read and extract information from 3D models prepared in Revit or Rhino format.

· Possess good communications and people skills

· Good organization, coordination and leadership skills

· Minimum 5 years working experience in façade design

About Us

The Lindner Group is Europe’s leading manufacturer and contractor for the building envelope, interior fit-out and insulation. With a workforce over 8000, Lindner operates numerous production facilities and subsidiary companies in more than 20 countries from our main office in Arnstorf, Germany.

Lindner Facades Asia Pte Ltd (LFA) was successfully re-launched in May 2019, as part of the Lindner Steel & Glass operation. Located in Singapore, LFA will be used as a base to promote and secure projects for LFA and Lindner Group in the vast and promising Asian market.

Our projects will cover the Asian markets, which include India, Philippines, Indonesia, Malaysia, Myanmar, Thailand and Vietnam. Enquires have also been received from Cambodia, Bangladesh and Sri Lanka.

LFA offers pre-sales consultation and planning advice, design and engineering, project management and planning, fabrication and installation. Employing a team of highly skilled, well-trained and extensive experience when it comes to LFA’S unique selling point in delivering turnkey projects with complex steel and glass, facades, skylights, curtain wall and building envelopes.

Due to rapid growth, we are seeking an experienced Design Manager cum Team Leader to strengthen our technical team. This is a full-time position, and it is perfect for someone with rich façade design knowledge and passionate about managing roles.

Job Responsibilities

· In charge of Design Team to carry out façade design works.

· Organize and plan a design works to meet construction schedule.

· Provide leadership and manage the team members in a professional manner, e.g., allocation of work, providing guidelines to them in drafting to maintain the quality, improving productivity, checking drawings and cutting list profiles etc.

· Ensure design, drawings, and all other deliverables meet the standard requirements, specifications and within scope of works.

· Identify additional work/variations to the Project Manager / Contract Manager for processing/approval of the variation order.

· To coordination between Design Team, Consultants, Main Contractor and other contractors.

· Assist site team in resolution of site clashes.

· Participate in workshops and lead, review and comment of shop drawings in terms of constructability, sequencing and ensure quality of the design is maintained throughout.

· Manage the design change process to ensure minimal impact to project schedule and minimize cost impacts as a result of such design change.

· To resolve any unforeseen interface problems throughout the various design phases.

Job Requirements

· Required skills: design development, design management.

· Knowledge and skills in Revit and Rhino are advantage, at least is able to read and extract information from 3D models prepared in Revit or Rhino format.

· Possess good communications and people skills

· Good organization, coordination and leadership skills

· Minimum 5 years working experience in façade design

Note: This role will require travel to China and Vietnam for approximately 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for a minimum of 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

- To troubleshoot and problem solving of manufacturing process

- To liaise with operation team in technical challenge and manufacture process.

- To provide alternative solution to production on any process problem arises

- Familiar with metalworks manufacturing processes, etc. fabrication & welding, machining

- Familiar and able to interpret mechanical drawings & understand requirements

- Responsible for the maintenance of the system inclusive of the machine

- Ad-hoc duties as assigned

Requirment

- Minimum ITE, Degree/Diploma in Mechanical /Enginerring

- Well versed in using AutoCAD knowledge

- Experience in electrical engineering will be a plus

- Good communication skills and the ability to work collaboratively in a team environment.

- Ability to manage multiple tasks and deadlines effectively.

• Main Contractor
• 5 day week
• Central working location
• Good benefits & staff welfare

Responsibilities:

• Responsible for the preparations and modifications of Architectural design from concept designs through schematic design, design development and construction documentation
• Responsible for developing solutions to the technical & design complications following Singapore’s established standards
• Required to participate in Client liaison, authority consultation, coordination with consultants and subcontractors, and attending design and construction meetings
• Collaborating with clients, architects, engineers, government agencies and stakeholders to create functional and aesthetic design results as per conceptual design.
• Work out schedule for shop drawing preparation/approval and material approval/procurement based on master programme and monitor the status.
• Liaise with BIM team on drawings production to identify clashes with other trades
• Ensure compliance to construction drawings, project specifications, client's needs and authorities' code and standards.
• Verify site installation according to approved shop drawings and finalize as built drawings.
• Review project specifications, technical clarification and construction drawings, identify technical issues and seek technical clarification.

Requirements:

• Diploma or Degree in Building or Architecture
• Minimum 5 years of relevant experience in building projects

• 5 days
• 9am-6pm
• Kallang, Near Bendemeer, Lavender and Kallang MRT
• Up to $7000

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :
  1) Design of automation or semiconductor equipment
  2) High precision machine design
  3) Design of High Speed Pick and Place mechanisms
• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects.

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies.

· To prepare final design configurations, layouts, solid models and production/engineering data.

· To assist in preparation of machine documentation, specifications, manual.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, resourceful and organized.

Job Requirements:

· Degree/Diploma or relevant in Mechanical Engineering.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable.

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

Qualified candidates please send your application with full resume stating current and expected salary.

Company Description

Our client is a rapidly expanding Singapore based Startup Studio focused on automation & roboticsfor F&B, is rapidly expanding. They’re a Startup Studio that is redefining the accessibility and distribution of food and drink with robotics and automation.

They have assembled a brilliant team of engineers and food scientists, that blends youth and experience, with the aim of building fully automated solutions for the F&B industry. They are not abig corporate, where people can fade into obscurity, undervalued and unheard. Instead we pride ourselves on giving a platform for everyone to contribute, and see their ideas come to life!

Job Description

We are looking for a mechanical design engineer with at least 3 years of work experience who will be responsible for creating and developing mechanical systems and components for a food-making robot.
This includes conducting research, designing and drafting plans, testing and evaluating prototypes, and implementing and refining designs based on feedback and performance data. Note that this is a fully on-site role, so remote or hybrid work will not be permitted.

• Conducting research and analysis to understand the functional and performance requirements of the food-making robot we’re developing and coming up with appropriate design solutions.

• Developing detailed mechanical designs and technical drawings, using CAD

software and other tools, to create functional and efficient mechanical

systems and components
• Collaborating with other mechanical, electrical, electronics, and software

engineers to integrate mechanical designs into larger systems and ensure compatibility and performance.

• Testing and evaluating prototypes, using various tools and techniques, to assess their performance and identify any potential issues or areas for improvement.

Implementing and refining designs based on feedback and performance data and working with manufacturers to ensure that designs can be effectively and efficiently produced.

Requirements:

• Diploma or Bachelor's degree in mechanical engineering or a related field.
• 3 years of experience in mechanical design engineering, with a focus oncreating and developing mechanical systems and components.
• Proficiency with CAD software and other design tools, such as SolidWorks,and Inventor.
• Ability to prototype designs, assemble and test them.
• Experience with control systems (Arduino, stepper motors, sensors, encoders) in robotics products is a huge plus.
• Strong technical skills and understanding of mechanical engineering principles, including materials, stress analysis, and manufacturing processes.

The position offers a competitive salary and benefits package and the opportunity to work with a dynamic and innovative team. If you are a motivated and experienced Electrical and Electronics Engineer looking for a new challenge, please apply today.

Job Scope:

• Lead the design and development of engineering projects, ensuring compliance with specifications and standards
• Collaborate with cross-functional teams, including manufacturing, quality assurance, and project management
• Create and review detailed design drawings and models using CAD software
• Conduct design analysis and simulations to validate performance and reliability
• Mentor and provide guidance to junior engineers and design team members
• Manage project timelines and deliverables, ensuring adherence to schedules and budgets
• Coordinate with clients and stakeholders to gather requirements and provide technical support
• Identify and troubleshoot design issues, implementing effective solutions
• Stay updated on industry trends and emerging technologies to enhance design processes
• Prepare technical documentation and reports for project milestones and reviews

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• Over 5 years of experience in semiconductor equipment design
• Strong knowledge and experience in:
• Design of automation or semiconductor equipment
• High precision machine design
• High-speed pick and place mechanisms
• Familiarity with 3D Computer Aided Design software
• Ability to plan, prioritize, and coordinate projects effectively
• Self-motivated and capable of independent work, with strong communication skills
• Equipment troubleshooting skills
• Ability to produce detailed mechanical drawings and apply Geometric Dimensioning & Tolerancing knowledge

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description & Requirements

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, STRAP, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

Responsibilities:

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.
• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.
• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working.
• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.
• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs.

Requirements:

• Bachelors with min 5 - 8 years relevant industry exp.
• Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products.
• Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/UVM experience.
• Familiar with ASIC verification methodology, tools, and development flow.
• Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO(USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals.

Job Description

• Work on local and overseas sustainability related projects
• Manage and lead clients, project teams and various stake holders toward a more environmentally sustainable design
• Coordinate with clients, project teams and various stake holders for collection and compilation of data, calculation, verification, ratings submission, etc
• Assist in the preparation of progress payments claims and variation orders where required

Requirements

• Diploma / Bachelor degree in M&E, building services, sustainability or related engineering field
• At least 2 years of professional ESD experience
• Ability to identify innovative solutions to problems
• Proactive, possess a positive attitude and able to work independently
• Must have good interpersonal, verbal and written skills
• Must have initiative and possess desire to learn
• Ability to multi-task and work as a team