The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural). Preferably have done data centre, marine offshore, and mixed-development projects.
• Have completed at least 1 project (data centre, commercial bldg., industrial)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

We have an exciting position in the explosive growth area of Data Center Enterprise Storage. In this role you will be responsible for
developing the most advanced semiconductor devices to support stringent high capacity storage needs across all the top tier service
providers. Our IC R&D team is looking for an experienced physical design engineer to develop high speed custom analog/mixed signal
products for the storage industry. A qualified applicant would work closely with circuit design engineers to lay out high-speed custom analog
designs and develop mask layouts for customer products, as well as printed circuit board designs. You will join a cross-functional team
responsible for developing leading edge high-speed custom IC products that ultimately achieve high volume production.

Job Responsibilities
- Lay out high speed, high performance analog/mixed-signal custom integrated circuits
- Work directly with a team of engineers to determine floor plan, routing and I/O requirements
- Perform IC design rule and connectivity verification and drive products through mask release flows.
- Contribute to methodology improvements to increase layout and verification efficiency.
- Create reticle layouts, documentation, and PO’s to release products for mask build.
- Complete PCB layouts for test hardware.

Requirements/Qualifications should be:
- Bachelor's degree in Electrical Engineering (or related field)
- 5 years experience in custom analog IC physical design
- Experience with schematic-driven layout, floor planning, chip level routing, design for manufacturing and design rule and connectivity
verification is preferred
- Experience using Cadence Virtuoso XL preferred
- Experience with Cadence Allegro for PCB layout preferred
- Familiarity with both analog and digital layout tools and flows, circuit design concepts and IC manufacturing processes desired
- Strong communication skills
- Understanding of silicon process technologies (CMOS and Bipolar) and device physics would be a plus.
- Proven analytical skills (application of math and physics to solve problems)
- Must be meticulous and demonstrate attention to detail.

Responsibilities :

• Conduct equipment design & development work according to customers and internal specifications.
• Act as project lead to plan, organize and co-ordinate their respective project’s meetings to review design and ensure projects are kept to schedule.
• Maintain and control relevant documents related to R & D activities per requirements.
• Maintain, keep track, and ensure Billed Materials is updated.
• Generate detailed 2D/3D drawings.
• Raise ECN for update of changes to design and drawings and follow up on approval and ECN flow.
• Provide technical support to process & production, supply chain & QA for review and troubleshooting of design and drawings.

Requirements:

• Bachelor’s degree or master’s degree in mechanical engineering or relevant disciplines.
• At least 4 years of relevant experience in semiconductor or automation equipment design.
• Proficient in Microsoft Office applications (Words, Excel, PowerPoint)
• Strong understanding of mechanical engineering principles and engineering techniques are required.
• Plentiful experience of mechanical designs using SolidWorks is preferred. Candidate with Autodesk/Auto CAD Software will be an advantage.
• Solid knowledge and experience in material properties are required.
• Good communication, time management, problem-solving and decision-making skills.
• Willing to travel for overseas projects if required.

How to Apply:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to diana.pang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Pang Seng Leng Diana

EA Personnel Reg No: R1106651

Job Description:

• Responsible for analog/hybrid circuit program planning and design implementation, performance optimization, simulation verification and testing related work;
• Responsible for the design of high-performance, ultra-low voltage customized circuits under advanced technology. Targeting specific PPA requirements, able to select transistors, layout
• Effect analysis, unit logic merging and simplification, and starting from the underlying optimization thinking, deliver digital units or modules that can be integrated;
• Responsible for the physical design, analog/digital chip layout design of advanced technology digital ASIC/AI/CPU chips, and the exploration of new technologies such as PPAC optimization, fully customized design, and advanced packaging under advanced technology;
• Write various design documents and standardized materials, and implement the company's development processes, specifications and systems.
• Work tasks include but are not limited to:
• Commonly used analog chip or IP design, transistor-level circuit design and simulation, layout planning and design, timing library characterization extraction, SRAM custom design, etc.
• From gate-level netlist to back-end physical implementation of GDSII, digital/analog chip layout design, including PR, PV, IR Signoff, PPAC optimization, Sta/Spice Signoff, etc.;
• Chip design process development, In-House EDA tool development, chip yield tracking and optimization;

Requirements:

• Majors include but are not limited to mathematics/physics/electronic science and technology/microelectronics/information and communication engineering/computer science and technology/materials science and engineering fresh college students or overseas students within one year of graduation , master's degree or above;
• Excellent academic performance, strong curiosity, learning ability and knowledge transfer ability for new things and knowledge in professional and related fields;
• Understand the IC development process, and have a certain theoretical foundation and necessary capabilities of digital circuits as well as innovation capabilities.

Our client is a leader in semiconductor manufacturing equipments, providing designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking requirements. They are hiring for Senior Mechanical Design Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Senior Mechanical Design Engineer

Responsibilities:

Design and develop series of marking/inspection/ sorting/customised semiconductor equipment to meet the processing and automation needs of customers. Main duties involve

• Design standardization
• Costing and project management
• Machine and module conceptualization design
• Design for manufacturing (DFM), design for assembly (DFA) and Concurrent engineering
• Pneumatic/ hydraulic circuit design
• Detail fabrication drawings, assembly drawings and layout drawings
• Selection and sizing of standard components available off the shelf
• Undertake new product development or be involved in sustaining engineering/CIPs

Requirements:

• Bachelor/ Master of Engineering with minimum 5 years relevant experience
• 3D solid Modeling, preferably Pro-E (others like Solid Edge, Auto Inventor, Mechanical Desktop, Solid Designer are also acceptable).
• Strong project management skills
• Good track record in:

1. Ultra High Precision machine design
2. High Speed Pick and Place mechanism design
3. Structural, kinematics and dynamic analysis and FEA simulation
4. Geometrical tolerance and dimensional analysis (e.g. stack up error)
5. Engineering material selection
6. Design troubleshooting
7. Application of analysis tools like FMEA, DOE

Our client is a leader in semiconductor manufacturing equipments, providing designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking requirements. They are hiring for Senior Software Design Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Senior Software Design Engineer

Responsibilities:

• Design and develop software for automated semi-conductor process equipment.
• Improve equipment performance through CIPs and other development initiatives.
• Support field work to upgrade and resolve customer issues.

Requirements:

• Minimum Degree in Electrical & Electronics Engineering/Computer Studies or it’s equivalent.
• At least 5 years’ experience in programming on Windows (XP and above) environment.
• Good experience in C++, VC++, MFC, SQL and OOP.
• Good knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.
• Knowledge in PLC will be an added advantage.
• Strong analytical and problem-solving skills.
• Excellent team player.

Visit www.ppsjob.com.sg

Have years of experience in similar role (Interior, construction, civil)
Liaise with consultants and construction team, including Project Director/Managers, Engineers etc. for cost related issues
Prepare Bill of Quantities (BOQ) in accordance to specifications and drawings for calling of quotation
Sourcing of sub-contractors for related scope of works
Carry out cost comparison and shortlisting sub-contractors for the award of sub-contracts, including negotiation of quotation before finalizing the cost comparison & recommendation
Prepare and issue sub-contract documents/works order for approved sub-contracts' works
Monthly progress claim assessment and payment of sub-contractors in fair manner, and to ensure works carried out in compliance to contracts and specifications.
Prepare and claim variations to consultant
Site visits to understand the progress of construction and works involved
Working as a team member with colleagues to support each other on past to current work experienc

**Take note: This role is fully commission-based and the salary indicated is an estimate of what most Interior Designers in our company achieve monthly.

Requirements:

• Passionate about interior design.
• Self-motivated and driven to achieve sales targets.
• Background in interior design is advantageous.
• Ability to meet client requirements.

Responsibilities:

• Handle sales inquiries effectively.
• Provide expert advice on space planning and interior aesthetics.
• Create mood board proposals to communicate design concepts.
• Develop design briefs and schedules in collaboration with the team.
• Assist the Team Lead in preparing quotations (Training will be provided).
• Collaborate with the Visualization team to produce 3D design drawings.
• Engage in discussions with clients regarding design proposals.
• Manage and coordinate with subcontractors throughout project implementation.
• Conduct on-site inspections to ensure high-quality workmanship.

Benefits:

• Competitive full commission structure.
• Company-provided leads and marketing support.
• Comprehensive training on product/material knowledge and sales tactics.
• Yearly bonuses for achieving sales targets.
• Flexible working hours.
• Opportunities for career advancement based on performance.
• Potential to lead a team with overriding commissions.

Job summary

Join us as an Interior Design Sales Consultant, turning passion into earnings. Hope to welcome you to our family!

Key selling points

• Competitive full commission with yearly bonuses for achieving sales targets
• Strong support & guidance from company
• Opportunities for career advancement based on performance

Responsibilities

• · Leading Process Design Team for Oil & Gas Projects and guide a team of about 10 Process Design Engineers / Designers to finish the Process design (start from Basic design to Detail Design) of the project.
• · Leading a Team of Process Engineers & Designers in Preparation & Review of PFD, P&IDs, MSD, PSD, Hydraulic calculations, Equipment sizing calculations, BOG calculations, Heat Loss calculations, Tank Venting calculations, Tank capacity calculations, Heating coil calculations, PSV calculations, Process data sheets for Equipment’s such as pumps, compressors, Refrigeration unit, Tanks, Process data sheets for Instruments such as control valves, PSV, PT, TT, LT, Flow meter, Process line list, Heat & Material Balance, HAZOP & SIL Study, Operation Manual, Process control Narrative, Cause & Effect Diagram, Surge Analysis.
• · Review & Checking of Process Documents such as PFD, MSD, P&IDs, Hydraulic Calculations, Process Data Sheets, Surge Analysis, Design Calculations etc to ensure that all the Process documents comply to applicable Codes & Standards and Project Requirements
• · Review & Checking of Surge Analysis report using Pipenet Transient Module for product loading/unloading operation, fire water network systems etc.
• · Review & checking of various process philosophies like Process Control Philosophy, Operation Philosophy, Cause and Effect diagram, Flare and blowdown philosophy, isolation philosophy, Vent & Drain philosophy, shutdown philosophy.
• · Participation in Design Review, HAZOP Study, SIL Study, HAZID Study, ALARP, Bow Tie, MAHM, RAM Study, Alarm Rationalization workshop, SIMOPS, Constructability review carried out during various stages of project.
• · Review Hazop Report, SIL Assessment & Verification Report & Responsible for Closure of all Hazop & SIL Study Recommendation
• · Preparation & Implementation of checklist for all Process Documents
• · Management of Process Discipline Engineers Team for development of Process Design of Major Projects from feasibility studies through Conceptual Design to Detail Engineering.
• · Pre-Bid, FEED & Detailed Design documents review.
• · Maintain Design integrity and quality within the Process Engineering Team.
• · In-house Engineering Activities and Process Engineering Man Hours Estimation and Schedule.
• · Preparation, Monitoring and Control of Process Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Responsible for Process Engineering Execution Methods and Procedure, Process Engineering Disciplines Co-ordination, Process Engineering Deliverables delivery for Project Execution, Process Man-hours Monitoring, Attending design review Meetings with Clients and Package vendors, PSSR+HAZOP+SIL study.
• · Inter Discipline Review of other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc for consistency, quality and Design Integrity.
• · Review of Authority submission documents like Fire Fighting Calculations (Fire & Foam network hydraulic and Surge Analysis, Fire Fighting Design Philosophy).
• · Development & Review of automated excel spreadsheets for process calculations.
• · Preparation, Monitoring and Control of Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Review and ensure that all Process works are carried out in accordance with project specification. Maintain Design integrity and quality within the Process Engineering Team.
• · Preparing Process Engineering schedule and Process Engineering Man hours estimation to meet project requirements.
• · Co-ordinate with other Discipline for Process Inputs and ensure seamless Inter Discipline co-ordination between Process and other Discipline.
• · Job assignments, Mentoring and Supervision of works for Process Designers and Design Engineers.
• · Technical assistance to construction activities and attending to Site Queries.
• · Reviewing Vendor Drawings for Equipment’s and Instruments in terms of Process.
• · FEED & Pre-Bid works which involves Feasibility study.
• · Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness, and correctness in works.
• · Implement HSE objectives, policy, and company HSE procedures within his authority limit.
• · To integrate Risk-based thinking and HSE considerations into business decisions, plans and operations with the commitment to eliminate and reduce HSE hazards, aspects and risks.
• · To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• · To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects, and risks.

Requirements

• · Preferably Bachelor’s Degree in Chemical Engineering
• · Preferably to 15 years in Oil & Gas industry

Software Requirements

• · Proficient in Pipenet, Hysis, MS Excel, MS Word

Code Knowledge

• · API 2000, API 520, API 521, API 526, API 2350
• · SS 532
• · NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

• Based on the master program, work out a schedule for shop drawing preparation/approval and material approval/procurement and monitor the status.
• Supervise BIM modelers to produce shop drawings.
• Liaise with the BIM team on drawings production to identify clashes with other trades.
• Review, coordinate, and liaise with Consultants and Subcontractors to define the Architectural construction details and interface to Structure and M&E services.
• Ensure compliance with construction drawings, project specifications, client's needs, and authorities' codes and standards.
• Verify site installation according to approved shop drawings and finalize as-built drawings.
• Review project specifications, technical clarification, and construction drawings, identify technical issues, and seek clarification.

Requirements:

• Candidate must possess at least a Professional Certificate, Diploma, or a Bachelor’s
• Degree in Building or Architectural from a recognized institution.
• Minimum 5 years of relevant experience in building projects
• Knowledgeable in Singapore Building Codes and Regulations for Code on Accessibility in the Built Environment, Approveddocument/Acceptable solution and Green mark issued by BCA
• Familiar with local standard quality implementation, BCA CONQUAS, and other Quality Mark Assessments Familiar with Safety aspects in the Construction industry.
• Preferable experiences in Hospital/Medical facility in Singapore.
• Preferable knowledge of BIM software / Autodesk Revit.

Industry: Manufacturing/ Production

Location: West

Working Hours: Monday Friday, 8:30am 5.45pm

Basic + Allowance + AWS + VB

Job Responsibilities:

• Responsible for 3D product design and its requirements
• Lead in Mechanical and Engineering Design for Process Development or Product Design or Engineering solutions
• Create proof of concepts
• Generate engineering drawing with proper GD&T and Tolerance Stack up
• Define test requirements needed for all the designed products
• Perform Patent search for possible design infringement
• Drive Projects with tight timeline
• Any other duties as and when assigned
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Bachelor Degree in Mechanical / Industrial
• 1-2 years of relevant experience
• Good exposure in Plastic Injection molded parts design
• Knowledge of product design, engineering plastics behavior, product certification
• Knowledge of CAE simulation will be an added advantage
• Competent in Engineering calculations
• Hands on 3D CAD & CAE experience
• Good problem-solving skills with strong technical acumen

Please email your updated CV in Words format to [email protected]

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

We regret that only shortlisted candidates will be notified

EA Personnel: Lim Jing Yee, Lena

EA Registration No.: R1872533

People Profilers Pte Ltd

20 Cecil St, #08-09, PLUS Building, Singapore 049705

EA Licence Number: 02C4944

Tel: 6950 9755

JOBID: L345WWYW

• Working Days: 5 days’ work week
• Working Hours: 8:15 am–6 pm (Mon-Fri)
• Office Location: Joo Koon
• Salary Range: $2500 - $3500

(Fire protection Engineering Company serving the Oil & Gas & Offshore market)

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

about the company

My client is a leading manufacturer of digital electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career

about the job

• Design and realization of the chip floorplan, clock architecture and powerplan
• In charge of physical design tasks from netlist to GDSII (P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout)
• Lead analog designs during product development
• Physical design methodology of advanced process nodes and builds an automatic physical design platform

skills & experience required

• PhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics Engineering
• Min 4 years of hands on / research experience with digital backend ICs circuit design / physical design
• Well versed with synthesis, place & route, STA and design convergence
• Willing to work in a new start up entity in Singapore
• Proficient in tapeout experience at advanced technology will be a plus
• TCL,Perl,Python script development and familiar with EDA tool design

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

The Job

• Develop timing/power/noise characterization flow for advanced node memory compiler.
• Strong focus on design automation for SRAM compiler, big data analysis and design verification.
• Develop memory analysis flow for PPA check.
• Design and develop the layout for integrated circuits according to electronics engineering principles, using software to create design schematics and diagrams.

The Talent

• Bachelor's Degree (with min. 8 years of relevant industry experience) /Masters Degree (with min. 6 years of relevant industry experience)/ PhD in Electrical and Electronic Engineering/Computer Engineering/Computer Science.
• Knowledge of SRAM/ROM memory functionality and high speed, low power memory design architecture.
• Experience in spice simulation and understand CMOS layout view, Verilog coding is preferable.
• Proficient in script programming with Perl or Python3.

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

• Company located at Woodlands

• Working hour: 8:30am – 5:30pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Automation Electronics Manufacturing Company

Job Scope

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirement

• Degree in Electrical Engineering / Electronics Engineering or related disciplines
• 2 to 4 years of relevant experiences and roles in Industrial Automation

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Define requirements and features for Back-end semiconductor equipment.
• Develop and improve the concepts/architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Produce detailed engineering drawings.
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations, and product requirements.
• Application of analysis tools like Fish Bone Diagram, FMEA, DOE, etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering with minimum of 5 years of experience in automation design.
• Good knowledge and experience in the design of Automation or semiconductor equipment, High precision machine design, or Design of High-Speed Pick and Place mechanisms.
• Proficient with 3D CAD software and performing Equipment troubleshooting.
• Able to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.
• Ability to work independently with high level of motivation and communicate with all levels.
• Able to travel overseas for field support when required.

To apply, please click "Apply Now" or visit www.gmprecruit.com and search for job reference: 21623

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Piping Design Engineer

Salary Range: $2500 - $3500

Working Days: Mon - Fri (8:15 am–6 pm)

Office Location: Joo Koon

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Piping Design Engineer (Fire protection Engineering Industry)

Working Days: 5 days’ work week

Working Hours: 8:15 am–6 pm (Mon-Fri)

Office Location: Joo Koon

Salary Range: $2500 - $3500

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Piping Design Engineer

Working Days: 5 days’ work week

Working Hours: 8:15 am–6 pm (Mon-Fri)

Office Location: Joo Koon

Salary Range: $2500 - $3500

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Piping Design Engineer

Salary Range: $2500 - $3500

Working Days: Mon - Fri (8:15 am–6 pm)

Office Location: Joo Koon

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Company located at Woodlands

• Working hour: 8:30am – 5:30pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Automation Electronics Manufacturing Company

Job Scope

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirement

• Degree in Electrical Engineering / Electronics Engineering or related disciplines
• 2 to 4 years of relevant experiences and roles in Industrial Automation

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Electrical and Control Design Engineer

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling