Key Responsibilities:

• To assist in engineering projects, manufacturing and assembly works.
• To assist in the production, testing and qualification of company products and its peripherals.
• To administer technical documentation (schematics/mechanical drawing/user manuals) for engineering and company projects.
• To provide installation and support for engineering projects, including field services to customer (local & overseas)

Skills & Requirements:

• Diploma in Electrical/Electronics/Mechatronics Engineering.
• Fresh graduates and/or those with relevant experience in motor control and sensors control are welcome to apply
• Willingness to learn and implement changes to improve work processes.
• Self-motivated and ability to work independently.
• Able to start work immediately or with short notice period.

Job Description

1. Help implement "Green" initiatives to align with Company's sustainability and eco-friendly strategies.
2. Ensure compliance with mandatoy regulations regarding water polution, recycling and waste disposal.
3. Collect and analyse environmental data.
4. Be familiar with business requirements that requires, compliance with Enviromental Product Declaration,
ISO 14025 and Environmental, Social and Governance factors.
5. Help determine ways to prevent, control and correct environmental health hazards.
6. Maintain records and help manage Company's consumption of electrical and water resources.
7. Familiarity with company's effort in keeping pace in complying with Façade productss specifications
concerning Design for disassembly, use of recycled materials, circular economy, materials with low carbon
emission with sustainable characteristics.
8. Create reports about company's environmental impact.

Position Requirements

Bachelors Degree In Environmental Engineering

Tasks

Designing systems and processes to minimize pollution and waste

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Job Description:

• Create, implement, and maintain robust CI/CD pipelines for seamless software and firmware delivery.
• refine and optimize CI/CD processes to ensure efficiency and reliability.
• Partner with developers, evaluation teams, and QA engineers to ensure flawless integration.
• Support and enhance existing software solutions to meet evolving business needs.
• Design and develop cutting-edge automated test tools to support quality assurance and rapid development.

Job Requirements:

• Candidate must possess at least a Bachelor’s degree in Computer Science, Engineering, or a related field.
• Preferably have 2 years of working experience, candidate with no working experience is welcome to apply
• Strong experience with C++, C#, and/or Java programming languages.
• Proficiency in Windows and Linux environments.
• Hands-on experience with Jenkins and similar CI/CD tools.
• Exposure to Docker and container orchestration tools such as Kubernetes is a plus.
• Exceptional analytical and troubleshooting skills with a keen attention to detail.
• Strong communication and collaboration skills to thrive in a cross-functional environment.

Interested applicants, please send in your resume stating your date of availability, current and expected salary.

Key Responsibilities:

• Design and develop robotic systems, including hardware and software components.
• Program and simulate robots using programming languages such as Python, C++, or MATLAB.
• Integrate sensors, actuators, and other control systems into robotic platforms.
• Collaborate with mechanical, electrical, and software engineering teams to design, build, and test robotic systems.
• Troubleshoot and optimize robotic systems to improve performance and reliability.
• Develop and implement control algorithms and AI systems to enhance automation capabilities.
• Conduct research and development for new technologies and robotic applications.
• Ensure all robotic systems comply with safety standards and industry regulations.
• Maintain and upgrade robotic systems as required for improved functionality.

Qualifications:

• Bachelor’s or Master’s Degree in Robotics, Mechanical Engineering, Electrical Engineering, Computer Science, or a related field.
• Proven experience in designing and developing robotic systems (internships, projects, or professional work experience).
• Strong proficiency in programming languages such as Python, C++, or MATLAB.
• Solid understanding of control systems, sensors, and actuators in robotic applications.
• Experience with robotics software platforms such as ROS, VEX, or similar.
• Strong problem-solving skills and ability to troubleshoot complex systems.
• Knowledge of AI/ML algorithms applied to robotics is a plus.
• Familiarity with mechanical and electrical system design.
• Excellent communication skills with the ability to work in a team-oriented environment.
• Strong attention to detail and ability to manage multiple projects simultaneously.

Xiaomi Corporation was founded in April 2010 and listed on the Main Board of the Hong Kong Stock Exchange on July 9, 2018. Xiaomi is a consumer electronics and smart manufacturing company with smartphones and smart hardware connected by an IoT platform at its core.

Embracing our vision of “Make friends with users and be the coolest company in the users’ hearts”, Xiaomi continuously pursues innovations, high-quality user experience and operational efficiency. The company relentlessly builds amazing products with honest prices to let everyone in the world enjoy a better life through innovative technology.

Xiaomi is one of the world's leading smartphone companies. The company’s market share in terms of smartphone shipments ranked no. 2 globally in the second quarter of 2021. The company has also established the world’s leading consumer AIoT (AI+IoT) platform, with 374.5 million smart devices connected to its platform (excluding smartphones and laptops) as of 31 March 31, 2021, excluding smartphones and laptops. Xiaomi products are present in more than 100 countries and regions around the world.

Job Description

Key Responsibilities:

1. Construction of data warehouses, development and maintenance of data services for Xiaomi's overseas Internet business.
2. Design a reasonable multidimensional data analysis system architecture for massive data processing and query needs, adaptable to changes in business, to meet a variety of requirements.
3. Clean and process massive logs, and abstract reusable data models for multiple businesses.

Job Requirements

1. Bachelor’s degree or above in a computer-related field.
2. Familiar with common relational and non-relational databases, distributed storage, and capable of selecting appropriate storage components based on requirements.
3. Knowledge of big data processing frameworks such as Spark and Flink, and preference for those who understand the concept of streaming processing.
4. Possess good problem analysis and solving skills, strong learning ability, and logical thinking.

BIPO Service (Singapore) Pte. Ltd.

EA License No. : 18S9180

Job Description & Requirement

• Assist and provide technical inputs/support in our R&D in establishing a quality product from concept stage to prototype completion including conducting tests, interpreting data, finding high-quality materials to use, and conducting research on various parts.
• Responsible for design & development of commercial vehicles focus on technical specification and performance of the vehicles and powertrain components as well as software used in the vehicles.
• Liaise with OEMs on technical issues and raise Technical Reports, Prepare Technical Instructions to address technical issues on our product.
• Prepare Assembly work instructions, Quality control instruction and Operation Manual of our product.
• Create & maintain accurate Manufacturing Bill of Materials, develop cost- estimates for manufacturing process hours.
• Prepare new product specifications and provide support on component installation as required.
• Manage workload with a positive attitude as a team player in a collaborative work environment.
• Manage Product costing & provide support to sales.
• Qualification and Experience
• Min Diploma/Bachelor in Mechanical Engineering.
• Minimum 4 years’ experience working in an Automotive, Manufacturing, Machine shop, assembly environment or similiar environment
• A thorough understanding of engineering design principles and material processing
• Experience in Bill of Materials from either the Automotive, Aerospace or Rail industries
• If you have considerable experience of the automotive industry in an engineering Release & Change environment is an advantage
• If you understand automotive terminology, familiar with vehicle systems & components and the sequence of build of a vehicle is an advantage
• Proficient with Microsoft Word, Excel, PowerPoint
• Familiar with ISO 9001 or TS 16949 Quality Management System
• Experience in ERP applications will be an added advantage.
• Familiar with Lean Manufacturing principles, including Continuous Improvements
• Good communication skills, highly efficient, passion for engineering.

Job Description

• Liaise with respective functions to prepare project planning and progress report as and when required by authorities or clients and consultants.
• Ensuring projects meet agreed specifications, budgets or timescales
• Supervision of sub-contractors’ project execution processes.
• Attend technical meeting with authorities and consultants
• Ensure safe work procedures are implemented to control risk
• Familiar with relevant legal requirement
• Other duties as and when assigned

REQUIREMENT:

• Candidate must possess at least a Bachelor's Degree in Civil Engineering or equivalent.
• Required skill(s): MS Office, MS Project, AutoCad.
• Ability to work independently with minimum supervision and to meet tight deadlines
• Good team player

JOB RESPONSIBILITIES

• Planning and overseeing the construction operations of a project Conducting

1. Site layout
2. undertaking surveys
3. setting out sites
4. Work schedule
5. Managing equipment & materials at site
6. Organizing the workers
7. Safeguarding the environment

• Checking and modifying plans and specifications for constructability, efficiency, and safety
• Developing cost estimates and preparing bids
• Managing subcontractor firms
• Preparing site reports and filling in other paperwork
• Working with the owner to ensure that the project meets requirements
• Solving job site technical problems, moving between the field and office
• Gaining additional education and training
• Skilled in Using of Autocad, MS office, ability to prepare schedule in MS Project

JOB REQUIREMENTS

1. Bachelor Degree in Civil Engineering / Equivalent
2. Experienced in Construction Site
3. Sound knowledge of Engineering, construction, and design.
4. Great leadership and organizational skills.
5. Great written and verbal communication skills.
6. A willingness to learn.

Coordinating and ensuring new engines upon receipt and installation.

• Coordinate paperwork and processes upon new engines arrival
• Engine Commissioning for all Industrial and Marine Engines
• Work closely with the relevant stakeholders to ensure smooth process of installation
• Troubleshoot if not able to start up during testing
• Escalate if there are any deviation or issues

Before Maintenance or Repair Event for Engines Secure that right information, tools and spare parts are available.

• Carry out routine and preventive maintenance related work seeking data and using SDP. 3, diagnostics, MULTI, or other applicable system/tools according to service manual
• Collect, understand and start up work order
• Collect additional information
• Secure access to right tools
• Pick up spare parts

During Maintenance or Repair Event for Engines Through well-known and described working methods and standards perform maintenance or repair on time in a correct and safe way.

• Carry out work in a structured and methodical way according to checklists.
• Prepare Industrial/Marine engines and or components
• Complete visual inspections
• Search for additional information in systems
• Secure spare parts for additional jobs
• Perform maintenance or repair on engines/component
• Manage deviations
• Return not used spare parts
• Clean exchange parts
• Return special tools
• Restore engines to handed-in condition
• Inform next level about additional faults or findings

After Maintenance or Repair Event for Engines Secure minimized lead time of invoicing. Through clear description of performed work and/or communicated what needs to be done if the work is handed over to a colleague.

• Clarify performed work in work order and put signature
• End work order
• Complete handover
• Ensure all job cards, work orders, service sheets and component failure reports are filled and completed correctly.

Chan Chee Meng
EA 07C3069
R1110620

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Job Responsibilities:

• Develop Low-Power Design Workflows:
  Own the design process to minimize power consumption while ensuring performance and reliability using advanced tools and techniques.
• Full-Chip Floor Planning and Routing:
  Lead floor planning and place-and-route efforts to optimize chip area and meet performance, area, and power goals.
• Power Network Design:
  Create and analyze robust power networks to ensure performance, minimize losses, and support low-power goals.
• Timing Closure and Signoff:
  Collaborate with teams to resolve timing issues and manage power and signal integrity for design verification.
• Physical Verification (DRC and LVS):
  Ensure compliance with layout and manufacturing rules through DRC and LVS for a tape-out-ready design.
• Cross-Team Collaboration:
  Work with engineers across functions to align designs with chip architecture and solve design challenges.
• Continuous Improvement:
  Stay updated on design advancements and improve workflows for better efficiency and low-power optimization.

Requirements:

• Educational Background:
  Bachelor’s degree or higher in Electronics, Computer Science, Electrical Engineering, or a related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience:
  Minimum X years in physical design with a focus on high-performance, low-power designs. Must have tape-out experience and familiarity with advanced semiconductor technologies (12nm and below).
• Technical Expertise:
  Proficient in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Strong knowledge of power network design, IR drop analysis, and timing closure with static timing analysis (STA) tools like PrimeTime.
• Software Knowledge:
  Experience with tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Experience:
  Hands-on expertise in place-and-route methodologies for optimizing performance, power, and area.
• Soft Skills:
  Excellent communication and collaboration skills to work effectively in multidisciplinary teams. Strong problem-solving and critical thinking abilities to address design challenges.
• Preferred Skills:
  Experience with advanced low-power techniques, deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, and design-for-manufacturing (DFM) principles.

Responsibilities:

• Responsible for the mechanical design and development of electronic automation equipment.
• Design and review projects to meet customer requirements.
• Work with Production department to optimize design to minimize error.

Requirements:

• Min. Diploma in Mechanical or Mechatronic Engineering
• 2 to 10 years experience in electronic automation equipment design
• Proficient in Solidworks software
• Knowledge of Pro Engineer software will be an added advantage

Interested applicants, please send in your detailed resume including your current & previous working experiences as well as current and expected salary to [email protected]

We regret that only shortlisted candidates will be notified.

Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Job ID: 19411

• Location: Expo
• Working hours: 9am - 6pm
• Salary: up to $4,500 (Depending on experiences)

Job Description

• Provide technical support to customers either on-site or remotely.
• Troubleshoot and repair systems at customer site.
• Install new test systems and software upgrades.
• Work on projects such as creating manuals/SOPs etc.

Job Requirement

• Diploma or Degree in Electronics, Mechatronics, or a related field.
• Proficiency in Japanese (written and spoken) to effectively communicate with counterparts in Japan during weekly meetings, training, or troubleshooting.
• Intermediate skills in Microsoft Excel and Word.
• A team-oriented mindset with strong interpersonal and communication skills (oral and written).
• Willingness to travel frequently overseas on short notice.
• Flexibility to work overtime or on public holidays if necessary.
• A proactive attitude toward acquiring technical knowledge relevant to the role.
• Prior experience in a customer support role.
• Over 5 years of experience in the semiconductor industry.
• Familiarity with lasers, oscilloscopes, spectrum analyzers, or other similar instruments.
  

Interested applicants, kindly send your updated resume to Joanne (R21101135) [email protected] with the email subject header "Job Application for "19411, Assistant Engineer/Engineer".

Only shortlisted candidates will be notified, other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Pasona Singapore Pte Ltd

Joanne Yeo Min Qian
EA License No:90C4069

Registration No.: R21101135

about the company

My client is a leading manufacturer of digital electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career

about the job

• Design and realization of the chip floorplan, clock architecture and powerplan
• In charge of physical design tasks from netlist to GDSII (P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout)
• Lead analog designs during product development
• Physical design methodology of advanced process nodes and builds an automatic physical design platform

skills & experience required

• PhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics Engineering
• Min 4 years of hands on / research experience with digital backend ICs circuit design / physical design
• Well versed with synthesis, place & route, STA and design convergence
• Willing to work in a new start up entity in Singapore
• Proficient in tapeout experience at advanced technology will be a plus
• TCL,Perl,Python script development and familiar with EDA tool design

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• Kaki Bukit (East)

Your Responsibilities: -

• Generate mechanical drawings
• Coordinate with customers about requirements and feedbacks
• Ensure drawings are in correct specification and requirements
• Follow-up of assembly and installation work

You will need: -

• No experience required, traning provided

Apply now or email to [email protected]

Good luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 Recruit Lync Pte Ltd 22C1000

Responsibilities:

• Lead and manage design Consultant teams to deliver high-quality design solutions on time and within budget.
• Oversee the entire design process, from concept through to detailed design and construction documentation.
• Ensure designs meet project specifications, regulatory requirements, and client expectations.
• Coordinate with multidisciplinary teams, including architects, engineers, and consultants.
• Foster a collaborative and productive team environment.
• Provide mentorship and guidance to junior designers and engineers.
• Act as the primary point of contact for clients and stakeholders on design-related matters.
• Conduct regular meetings and presentations to update clients on project progress and address any concerns.
• Ensure client requirements are accurately captured and reflected in the design.
• Implement and enforce quality control procedures to ensure the highest standards of design.
• Review and approve design documents, drawings, and specifications.
• Conduct regular design audits and peer reviews to maintain quality and consistency.
• Ensure all designs comply with relevant regulatory requirements and standards.
• Liaise with regulatory agencies to obtain necessary approvals and permits.
• Stay updated on changes in regulations and standards and ensure designs are adapted accordingly.
• Provide technical leadership and expertise in civil engineering or architecture.
• Resolve complex design challenges and technical issues.
• Stay informed about the latest industry trends, technologies, and best practices.

Requirements:

• Bachelor’s degree in Civil Engineering, Architecture, or a related field.
• Master’s degree is preferred.
• Minimum of 15 years of relevant experience in civil engineering or architecture.
• Proven experience in managing design teams on complex projects.
• Experience in the design of multi-storey bus depots or similar structures is preferred.
• Professional Engineer (PE) or Registered Architect (RA) status.
• Strong leadership and team management skills.
• Excellent communication and interpersonal skills.
• Proficiency in design software and tools (e.g., AutoCAD, Revit, BIM).
• In-depth knowledge of regulatory requirements and standards.

If you are shortlisted for the first round of screening, our Recruiter will contact you directly.

EA License No: 24C2521 | EA Reg No:21103634 (Johnny Wu)

1) Responsible for proper take -over of confirmed projects from sales department.

2) preparing project schedules , manpower allocation plans and bill of quantity based on project

requirements and cost estimates.

3) Ensuring project drawings/documents are subject to proper internal and external design review

and vertification.

4) Ensuring all project documents are timely updated and subjected to proper project document control.

5)

Create and maintain optimal Database / DWH / Datamart architecture, which may include:

• Build the infrastructure required for optimal extraction, transformation, and loading of data from a wide variety of data sources using Informatica, SQL and related technologies

• Identify, design and implement internal process improvements.

i) Automating manual processes

ii) Optimizing data delivery

iii) Re-designing infrastructure for greater scalability

• Work with stakeholders to identify business needs and build/maintain Datamart

Participate in project and assist the user PM on the followings:

• To coordinate with IT and stakeholders on the completion of the UAT

• To create test cases/ test script

• To conduct UAT testing and post implementation phase

Job Description

• Online and Offline Partial Discharge Measurements for HV electrical assets such as cables , transformers, switchgears , motors and generators
• Offline Cable testings (Hi-pot test, Megger test, Tangent Delta test) above 6.6kV rated Cables
• Infra-Red Thermography for HV and LV Switchboards
• Lightning protection and earthing system measurement.
• Assist to servicing maintenance work by project teams.
• Handling of multiple test equipment from Omicron, Doble Engineering,Qualitrol, IRIS Power, EA Technology, HVPD, PDS, B2 and IPEC

Requirement

· Bachelor Degree in Electrical Engineering (Preferably SIT, NTU)

· Training will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

13th Month & Variable Bonus

Responsibilities:

• Attends / conducts daily tool box briefing, weekly briefing & to participate PSCC meeting.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations.
• Oversees day-to-day project supervision for new construction platform
• Ensures work assigned is carried out effectively and productively in order to meet client specifications and requirements
• Monitors on structure work progress activities.
• Reports on the structure project progressEnsures sub-contractors carry out the work as planned
• Evaluates project to identify issues and opportunities to improve performance
• Identifies and resolve structure interference and propose modification onsite if necessary.
• Monitors drawing and technical information
• Conducts Risk Analysis assessment

Requirements:

• Bachelor's degree, Diploma in Engineering
• 3 – 5 years of relevant working experience in construction of oil & gas offshore platform project
• A team player & be able to work closely with other discipline supervisors.
• Willing to work late hours

Our Address and Working Hours:

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8am - 5:15pm

Fri : 8am - 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.