JOB DESCRIPTION

1. Perform concept design studies, sketch plans, and criteria/facilities programs for projects as required

2. Perform technical review of drawings and required design submission on assigned projects, and to ensure conformance with company design standards

3. Participate inter-department coordination on all project related issues

4. Provide design guidance to client and their consultants, as well as internal design and construction staff to adapt company design standards

5. Conduct site visits.

6. Maintain and update project review templates and quality control checklists

7. Provide recommendation for design changes to address customer satisfaction, operational concerns, company standard, and development strategies

8. Assist and to maintain and develop company standard documents and work flow

9. Maintain on policy, methods, and systems support matters

10. Any other relevant tasks as assigned by Project Manager

JOB QUALIFICATION

1. Minimum Bachelor Degree in related / Engineering profession

2. A minimum of 5 years of progressive experience in semicon-related project.

3. Good design skills, technical and communication skills.

4. Be confident, assertive and independent

5. Possesses intermediate knowledge of applicable codes, and implications on design

6. Advanced ability to work in team environment and supervise others

7. Ability to plan and manage design team efforts to effectively meet deadlines

8. Good interpersonal skill and attention to detail

9. Ability to work well in high volume, fast-paced environment as a member of a collaborative team

10. Proficient in electronic mark-up software, MS Office, MS Project, Sketchup, AutoCAD, BIM and other relevant 3d softwares.

The Senior Design Engineer is responsible for assisting the Senior/Technical Manager on structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis.
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications, and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers, and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required.
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the workplace.

Skills & Requirements

• Education: Minimum Degree in Civil Engineering from accredited Universities
• Experience: Prior 6 to 8 years of experience in design and construction
• At least 5 years of civil MRT station experience (have completed at least 1 MRT station project)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.
• Well versed in Autocad and BIM software is preferred.
• Technical Competencies: Technical expertise and knowledge in Foundation, Structural and Civil works (MRT Stations).

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Responsibilities:

• Conduct site survey and prepare the drawing as per project requirements that complies to the SCDF regulations
• Perform technical assessment such as Shading analysis PVSyst simulation, consumption analysis and etc
• Prepare economics analysis, proposal and tender documents for submission
• Liaise with vendors/suppliers for price lists and up-to-date product and service information with the procurement team
• Familiarize yourself with Authority requirement and IEC standard or equivalent for renewable system installation)
• Coordinate closely with client site personnels and safety coordinators
• Liaise with other teams to gather feedback on design and costing for continuous improvement
• Produce design drawings like SLD, Panel and String Layout using AutoCAD software
• Ad hoc task assigned by the reporting officer
  

Job Requirements:

• Minimum Degree in Electrical Engineering/Renewable energy-related field is preferred
• Well versed with Autocad is a must. Familiar with PVSyst and Sketchup is a preferred
• Proficient in engineering drawing interpretation and adept at applying requirements to design effectivel
• At least 1-2 years prior experience preferred but not required
• Knowledge in electrical design and solar engineering
• Driven, high energy individual who strives for success
• Strong technical understanding and troubleshooting skills
• Quick learner, goal-oriented team player with strong communication
• Interest in renewable energy and sustainability is a plus

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, RTL Design

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 5-8 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Project Design & Engineering Calculations and Proposal drawings to Client.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as Equipment sample or Site measurement studies

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Schedule the project in logical steps and budget time required to meet deadlines.

Site & office project management and daily operations including Engineering Design, Drawing and Fabrication, inspections, site measurements and handover to client’s.

Attend Site meeting, Equipment rectification in assembly and dismantling when required.

Overall project planning, scheduling, monitoring, and updating to meet project completion targets.

Liaison and meeting with client's representatives, relevant authorities, and consultants.

Site co-ordination, monitoring and report work progress.

Flair in design; able to sketch fast and produce good design concept

Coordinate all new and current on-going projects and able to communicate well with all levels

Review M&E Design Drawings and ensure compliance with design specifications and guidelines. Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Review incoming engineering, ISO piping drawings and assess impact of extra work or changes on schedule.

Ensure all regulatory and statutory requirements regarding testing and record keeping are met.

Supervise and coordinate M&E and Mechanical piping/equipment installation in accordance with approved drawings and materials. Coordinate M&E details with Clients, Consultants, Sub-contractors and other site staffs.

Monitor performance of multi-skilled craft workers in the installation, removal, or adjustment of equipment or components in accordance with established project procedures, requirements and specifications.

Monitor construction schedules, methods, manning charts, materials and equipment requirements.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Supervise electrical and instrumentation construction work as per IFC drawings.

Monitor construction schedules, methods, manning charts, material and equipment requirements.

Monitor the activities of contractors and subcontractors performing craftwork, ensuring compliance with project quality, safety, and security requirements.

Min 5-7 years’ of experience in Engineering related activities in Mfg, Recycle, Oil & Gas and Chemical plant industry.

Responsible for safety of supervised personnel; ensures that craft personnel comply with established safety policies and procedures, and that they practice safe work habits.

Applicable only for Singaporeans / PR's

Job Requirements

1) To Work as lead Engineer for Oil & Gas Project

2) Leading a Team of Electrical Engineers in Preparation & Review of Load lists, Single Line diagram of PCC, PMCC, MCC, DB's, Equipment Sizing Calculation, System Study through ETAP (Version 19.1) and Preparation & Review of Layouts like Hazardous Area classification, Lighting Layout, Cable and Power Layout, Substation Equipment layout, Earthing & Lightning protection Layout.

3) Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies

4) Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/ approvals/resolution of open issues

5) Review and Ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team

6) Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.

7) Preparation of Material Requisition, Specifications, Technical Bid Evaluation for Electrical works.

8) Preparation and Compliance for Engineering Audit Requirements.

9) Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.

10) Technical assistance to construction activities and attending to Site Queries.

11)Reviewing Vendor Drawings for Transformers, Switchgears, Cables, Distribution Boards, Junction Box, LCS, Motors etc.

12) FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

13) Coordination with PMC / QP and Construction Coordination.

14) Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works

15) Inspecting various equipment like LV & MV Bus duct, LV & MV Switchgear, Cables, Transformer, AC / DC UPS

16) Field Engineering Support Activities to complete the task in accordance with the project schedule.

17) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

18) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelors’ Degree in Electrical Engineering

Experience

Preferably Minimum 15 years of experience

Software Requirements

ETAP, DIALUX, Auto cad, MS Excel, MS Word

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description:

As a Senior Design Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Scope:

• Design and develop mechanical systems, products, and components
• Create detailed technical drawings and specifications using CAD software (e.g., AutoCAD, SolidWorks, CATIA)
• Conduct simulations and analysis (e.g., stress, thermal, fluid dynamics) to validate designs
• Collaborate with cross-functional teams to integrate mechanical designs with other systems
• Perform design modifications and improvements based on feedback and testing results
• Develop prototypes and conduct hands-on testing to ensure design feasibility and performance
• Select materials, components, and manufacturing processes for product development
• Ensure designs comply with safety, regulatory, and industry standards
• Prepare and review technical documentation, reports, and presentations for stakeholders
• Support the manufacturing team in product assembly, testing, and troubleshooting
• Manage design projects, ensuring timelines, budgets, and quality standards are met
• Continuously research and apply new design technologies and innovations to improve mechanical systems

Requirements:

• ITE, Diploma, or Degree in Mechanical Engineering
• Minimum two years of experience in customized automation machine design
• Experience in semi-con, connector, or machine design preferred
• Knowledge of SolidWorks, with Pro-E and Inventor as added advantages
• Strong understanding of mechanical movement, function, and performance
• Good perception of 2D & 3D objects and machining processes
• Passion for designing high-performance machines

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

THE PERSON:

The ideal candidate should have a deep understanding of analog design and able to lead, attend and present at design review meetings with teams worldwide.

KEY RESPONSIBILITIES:

• Circuit design of wireline transceiver building blocks (PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer, etc.)
• Conduct peer reviews of circuit design and verification results
• Working with validation team to evaluate silicon results

PREFERRED EXPERIENCE:

• Extensive experience with high speed analog design with blocks like ADC, PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer.
• Experience with latest process technologies like 7nm or below Finfet technology.

ACADEMIC CREDENTIALS:

• Bachelors/Masters/Phd Degree in Electronic Engineering

LOCATION:

Singapore

Senior Design Engineer work in conjunction with Clients, Consultant, Contractors and Sub-Contractors in order to oversee the design and construction of a project. Additional responsibilities include reviewing project bids, review of design drawings, checking and submission of shop drawings and arch materials for approval, and accurate representation of the best interests of the overall project is a major aspect of the coordinator's duties.

Key Accountabilities :-

• Coordination with Client, Consultant, System Wide Contractors and Architectural Sub-Contractors
• Compliance with various regulations by the government and requirements set by the client
• Review and interpret plans, provide schedules, check shop drawings and method statements, submit architectural materials for approval, provide progress report to client
• Oversee various Architectural Sub-Contractors work, highlight interfacing with various SWC, comply with schedules, meet the standards of client
• Assist consultant and client to carry out Architectural RI inspection
• To ensure all works are carried out in line with LAIO health and safety standards in order to provide high quality works in a safe and efficient manner

Requirement:-

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Architecture or equivalent
• At least 5 Year(s) of working experience in the related field is required for this position
• It is a requirement to have Civil Infrastruture and LTA MRT Project experiences
• Exposure to design and building contract
• Able to work independently with minimum supervision
• Strong interpersonal skills and ability to communicate at all levels
• Required Skill(s): MS Office, Computer Literate (Microstation, AutoCAD 2D and 3D), report writing

Position Overview:

We are seeking a skilled Physical Design Engineer to join our team. As a Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Assist in the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 2-4 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Excellent problem-solving skills and ability to work effectively in a team environment.

We are currently working with a leading semiconductor test and measurement equipment manufacturing MNC in expanding their PCB Design team. Targeting to add 4 headcounts to the team by end of 1st quarter 2025.
Reporting to Engineering Manager, the PCB Design Engineer/Senior Engineer will be responsible for:
Responsibilities:

• Conduct physical layout of PCBs, including component placement, routing, trace length adjustments, and verification.
• Utilize electrical knowledge in high-speed design, RF, and power to meet project specifications.
• Design for manufacturability by collaborating with PCB suppliers and implementing industry best practices to minimize costs and enhance yield.
• Test new internal design tools and provide feedback to the development team.
• Establish design processes aimed at reducing cycle times, minimizing defects, and enhancing product performance.
• Develop design documentation and training materials.

Requirements:

• Minimally Bachelor’s Degree or Diploma in Electrical/Electronics Engineering with a minimum of 4 – 6years of relevant PCB design experience.
• Particularly in analog and mixed-signal applications, and collaboration with PCB fabrication houses to improve manufacturability.
• Experience with blind, buried, and micro vias is a plus.
• Familiarity with logical net listings, schematic usage, electrical and routing rule creation, and signal/power integrity optimization.
• Experience in RF, backplane, and electrical package design/routing, as well as a background in semiconductor testing or the ATE industry, is advantageous.
• Proficiency in Cadence Allegro/Valor and/or PAD Power PCB, as well as Microsoft Excel.
• Strong communication skills, a sense of responsibility, attention to detail, and a collaborative mindset.

Benefits:

• Strong company branding within top 10 list.
• Competitive salary and comprehensive employee benefits.
• Hybrid work arrangement.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

THE ROLE:

To validate and characterize the most cut edge SerDes design including PAM4 224G transceiver on the most advance technology node. Using the latest measuring equipment the semiconductor industry has to offer to benchmark AMD’s SerDes against the challenging industry standard.

THE PERSON:

We are looking for a meticulous and motivated engineer to join the validation teams.

KEY RESPONSIBILITIES:

• Post Silicon Validation of high speed SerDes
• Understand the industry requirements and specification for high speed IO
• Develop validation methodology to validate new industry standard and requirements.
• Characterize the latest SerDes design
• SerDes debug with designers on Silicon
• Tuned the latest design to performance at the most optimum setting
• Generate specification base on measured results
• Work with remote teams to co-ordinate distributed task.
• Support FAE on customer’s issues relating to high Speed Ios

PREFERRED EXPERIENCE:

• Experience in high speed IO SerDes post-silicon validation.
• In-depth knowledge of the latest industry standards such as PCIe, Display Port, JESD, SDI, OIF-CEI-11G/25G/56G/112G-VSR/SR/MR/LR, IEEE 802.3 KR/CR/CAUI/GAUI etc.
• Strong programming/scripting skills coding languages such as Python, C/C++, TCL for firmware development, test methodology development and test automation
• Extensive experience with common lab equipment, including BERT, analyzers, oscilloscopes, PNA/VNA etc
• Knowledge of SerDes general architectures and link level system analysis
• Good understanding in transmission line theory and electromagnetic theory
• Experience in system level serial link analysis and simulation, system performance optimization and standard/architecture level study using tools such as Matlab, ADS etc.

ACADEMIC CREDENTIALS:

• Bachelors/Masters degree in Electrical/Electronics Engineering

LOCATION:

Singapore

Role Responsibilities

• Responsible for the running of small, medium and large size projects in Singapore and throughout Asia Pacific
• Undertakes a client facing role in the development, design and coordination of engineering project services for mechanical designs, installations, systems, equipment and facilities
• Actively involved in the production of drawings, calculations, schedules and specifications for all related mechanical/electrical systems
• Significant focus on the design of Mission Critical Data Centre Mechanical services including all equipment, systems and interfaces. For mechanical services including cooling, AC, ventilation, generator fuel delivery systems, associated hydraulic systems, public health & plumbing, fire protection
• Carries out feasibility, due diligence, condition/dilapidation and other types of surveys and tests on new & existing sites and facilities in respect of mechanical services
• Visits sites regularly and carries out inspections during construction stage of projects to ensure that the designs produced are realized practically and accurately
• Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements
• Day to day decision making on project progress, ongoing requirements for deliverables against detail and programme and direct liaison with and advice to clients
• Represents Company at technical meetings with clients, stake holders, professional and contractors teams
• Ensures engineering deliverables, including drawings, calculations, schedules and specifications meet required robust industry and legal standards
• Leads on the coordination of engineering services internally between MEP disciplines and externally between MEP and all other relevant designs
• Takes a holistic view in the selection and application of engineering concepts and solutions
• Based in Singapore but may be required to travel through out the region and between offices

Role Requirements

• At least 8 years overall experience with 3 years Data Centre design experience
• Broad design experience across Commercial, High Rise, Hotels & Leisure would be beneficial
• Degree or higher in appropriate engineering discipline or have sufficient equivalent experience
• Singapore Professional Engineer registration or progress towards beneficial
• Significant experience in production of drawings, calculations, schedules & specifications for a range of building types
• Sound knowledge of key Health and Safety issues and legislation including Singapore DfS
• Knowledge of MS Office applications Outlook, word, excel, PowerPoint etc
• Knowledge of AutoCAD/Revit/Hevacomp/IES/Amtec etc BIM/CAD calculation software
• Good understanding of Singapore and, preferably, Asia regional standards/Regulations/Codes
• Be a motivated, highly dependable individual
• Strong engineering fundamentals, including design principles, machine elements, materials, and fabrication methods
• Ability to prioritize own workload
• Ability to work to deadlines
• Managerial skills, projects and resources focused
• Presentation skills
• The ability to perform complex project / business case analysis to justify technical decisions and present the justification to management in a high level review

Job Description & Requirements

• Minimum Degree in Mechatronics/Computer Science or Equivalent.
• 5 years’ of experience in programming on Windows
• Proficiency with C++, VC++, MFC, SQL and OOP.
• Must have experience in Semi Equipment SECS/GEM Protocol
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.

Key Responsibilities:

• Design and develop machine control software for automated semiconductor equipment.
• Integrate Software or OEM Equipment
• Conduct Analysis, recommend changes to improve equipment performance
• Develop Control Software
• Provide Support for on-site installation

About the role

• Work as the Design Engineer to our LTA projects
• To review of contractor’s Design and Construction submission and comment
• To assist the SDE in the review of design submissions

Responsibilities will include:

• To attend design meeting and all other relevant meetings as and when required
• To give suggestion in construction sequence based on the design reviews
• To follow PGI on rotational basis with the SDE
• To review Shop Drawings and comment if any

About You

• At least five (5) years of relevant experience on projects similar in nature to the Works in the Civil Contract
• At least five (5) years in the design of structural and/or geotechnical works for deep excavation projects of a similar size and complexity
• Experience in working in a structural engineering team within a large multi discipline project team.
• Experience in minimum facility platform design and including the substructure, topsides and bridges.
• Ability to meet agreed deadlines
• Possess excellent interpersonal skills and ability to work as part of team.
• Familiarity of Singapore local codes & standards

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

RTL Lead Engineer

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 10-12 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Responsibilities:

• Fully responsible for Netlist-to-GDS physical design implementation of low power chips

Requirements:

• Bachelor/Masters Degree in Electrical/Computer Engineering
• 3-6 yrs Experience in physical design with tape-outs
• Knowledge of complete Netlist-to-GDS flow, Synopsys/Cadence tools like ICC or Encounter
• Good in script programming with Perl, TCL/TK or other languages

Please apply here: https://talent.sage.hr/jobs/12fc69c2-7012-4edc-b214-bb9c2ded1da2

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for IC Design Research Engineers with the following backgrounds:

- Digital IC Design

- Analog IC Design

As an IC Design Research Engineer, you will design and innovate secure circuits and systems for next-generation low-power IoMT devices and sensors, focusing on hardware security, and smart computing and connectivity platforms.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.