Job Responsibilities

1. Provide front and backend supports for the following security systems:

a. Access Control System – Integrated Security Management System (ISMS);

b. Electronic Key and Cabinet System: Key Management System (KMS);

c. Radio Communications: Digital Trunk Radio System (DTRS);

d. CCTV System – Video Surveillance Management System (VSMS);

e. Entry / Exit Access Turnstiles;

f. Crash Barriers; and

g. Vehicle Alert System

2. Perform corrective and preventive maintenance on all security systems.

3. Ensure critical system fault reported rectified within the shortest possible time to prevent disruption to operation.

4. Update and maintain fault rectification report.

5. Maintain security system stock inventory to ensure sufficient spare.

Job Requirements

• Meet the relevant Regulatory Authority's statutory requirement of minimum 21 years of age.
• Diploma/Higher NITEC/NITEC from a recognized training institute.
• Must be able to work rotating shifts, including weekends and public holidays
• Technical knowledge or experience in electrical/electronic work. IT Network knowledge would be an added advantage.
• Experience in CCTV or card access system.

Job Title: Engineer

● Key Responsibilities

- Responsible for preparing schematic/assembly drawings, vehicular calculation and technical documentation for projects.

- Hands-on for vehicular dimensions measurement.

- LTA submission.

- Engineering support and correspondence to vehicular projects.

- Other ad-hoc tasks assign by Head of Engineering.

● Safety and Compliance:

- Ensure compliance with safety regulations and company policies.

- Conduct risk assessments and implement safety improvements.

● Collaboration:

- Work closely with sales, production, aftersales teams.

● Requirements:

- Candidate possess at least Diploma in Engineering (Mechanical / Mechatronic) or equivalent.

- Minimum one of experience in a manufacturing environment, preferably in vehicular or related industries.

- Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

- Proficient in mechanical structural calculation

- Advantage if candidate has experience and familiar with quality management systems
(e.g., ISO 9001, ISO45001).

● Desired Quality:

- Have analytical thinking skills.

- Can work well with others.

- To be flexible and open to company workflow changes.

- Strong problem-solving, communication, and project management skills.

- Ability to work in a desk/factory environment and prioritize multi-tasking.

- Self starter

- Willing to learn

Job Requirements :

• Bachelor Degree in Civil Engineering recognised by PE Board ( Singapore )
• Minimum 1 to 2 years of design experience in a local consultant firm
• Graduate engineer with a positive attitude may also apply
• Candidates with ( partial ) overseas experience may be considered
• Conversant with current design codes and design process in Singapore
• Independent and organised, with positive work attitude
• Willing to put in extra effort / time when need arises
• Strong communication skills and effective team player
• Proficiency with ACAD will be an added advantage
• Able to execute submission to relevant agencies / authorities in Singapore
• Able to co-ordinate projects with other team members
• Willing to learn architectural permitting / compliances to Singapore authorities

`

Job Description :

• Support Senior Engineers in the detail design and design coordination of Civil, Structural and Geotechnical projects.
• Responsible for the execution of structural design and drafting works
• Preparation of calculations and review of structural design drawings
• Customer specifications, applicable codes, standards and other generally accepted
• practices.

Responsibilities :

• Design of temporary and permanent works
• Carrying out analysis design of buildings and infrastructure
• Co-ordination of projects including submission to local authorities and liaison during the construction stage
• Liaise with clients, consultant, and authorities on technical matters

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

· Be part of a team in the implementation of Nationwide Mobile Network

· Preparation of proposals and documentation according to project standards

· Conduct site works, such as survey, site meetings, site handover

· Perform Commissioning and Integration of communication equipment

· Perform Coverage Walk Test and upload data for processing

· Competent to carry out troubleshooting with on-job training

· Coordinate with installation teams on site requirements and progress

· Update of site status

· Ensure Compliance with workplace safety, health and other regulatory requirements

Requirements

• Diploma in Electronics/ Mechatronics/ Electrical/ Communication Engineering or related discipline.
• Cad Software knowledge is an added advantage.

ROLES & RESPONSIBILITIES

• To be responsible for all deliverables required in the agreement with Singapore General Hospital.
• To organize his team to align with the overall client’s expectation and contractual requirements andsupport the operations of the hospital, especially in the front end engineering and customersupports. To plan and execute all fix it and programmed maintenance within the frame work of theallocated resources.
• To plan the resources available to align with the operational requirements for fix it and programmedmaintenance.
• Managing all minor repairs and fix it work within the budget.
• Work closely with other service providers in the hospital to be part of the team to create a safe andsound environment for the patients, staff and visitors, especially ISS House Keeping and Portering team to demonstrate the strength and capability of ISS’s integrated service model to be productive, efficient and effective.
• Constantly engaging the client and end users to seek feed back, gaps and improvementopportunities through survey and dialogue.
• Responsible for overall customer and end users relationship management while exercising costcontrol monitor and measure with the awareness to generating additional works to enhancemargin.
• To stabilize the team during upon operations and continued to seek improvement in theorganization structure and operations process to improve supports to the hospital.
• Manage relationship with all specialist sub-con and contractors appointed by the hospital toachieve the required KPI, client’s expectations and deliverables in the contract with SingaporeGeneral Hospital.
• Be part of the team to management energy saving and initiatives.
• Identify engineering issues and trouble shooting to response to end users’ request. Resolving andmitigating potential engineering problems and potential cause to system breakdown. Work closelywith the Central Operations to tackle engineering problems.

JOB REQUIREMENTS

1. Contractual fulfilment of ISS for the outsourced facility management contract

2. Compliance of all statutory requirements

3. Successful mobilization

4. Achieve financial margin set by the management

5. Motivation and leadership of the outsources facility management team

6. Meeting KPI requirements and meet customers’ and end users’ expectations

7. Healthy QEHS records

8. Provide an safety environment to enhance the patient’s staff’s and visitors’ experience

• Responsible for all major mechanical and electrical and instrumentation equipment
• Lead a team of technical executives/technicians for troubleshooting works
• Manage the purchase of major supply and repair items alongside with supervision and execution of preventive and condition monitoring of major electrical equipment
• Handle hands-on preventive maintenance and breakdown maintenance work
• Coordination with clients and subcontractors to meet the site/project requirements
• Carry out rectification of faults within a specified time
• In-charge of troubleshooting of M&E system
• Responsible for planning, execution and supervision of all facilities management and operational activities
• Responsible for project cost control and service standards
• Any other ad hoc duties assigned

Job Requirements

• Degree or Diploma in Engineering.
• 3-5 years of relevant working experience
• Technical knowledge of M&E systems(including, but not limited to, fire protection systems, AV systems and ACMV systems) is an added advantage
• Able to perform shift work if required
• Preventive Maintenance Troubleshooting

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

Junior Radio Frequency Design Engineer

About Doodle Labs

Doodle Labs is the global leader in high-performance private wireless systems. We build cutting-edge mesh networks for robotics, drones, and the Industrial Internet of Things. Doodle Labs has experienced rapid growth over the past five years as our radio systems have been adopted by Fortune 500 companies (e.g. Airbus, General Electric) and industry-leading innovators (e.g. Boston Dynamics, FLIR).

Your Opportunity

Doodle Labs develops market-leading broadband mesh radios. Products include handheld mesh hotspots (Wearable Smart Radio) and tiny embedded multi-band radios for robots (Helix). Your opportunity is to build novel RF products while implementing Doodle Labs’ patented RF techniques. You will design and develop next generation wireless communication systems utilizing Wi-Fi 4/5/6/6E chipsets and protocols.

Job Description

· Perform detailed radio frequency translation plans and architectures

· Evaluate gain, noise parameters (NF, SNR), dynamic range, linearity, and power consumption analyses to execute a predictable, robust design

· Collaborate with CAD engineers and drive PCB implementation of the design with emphasis on clean power supply design, interconnect design for required EMI and RF transmission performance

· Participate in design reviews and prepare design documentations at every stage of development until the final prototype test and characterization

· Perform parametric evaluation of transceivers, like Pout, IMD/IP3, EVM, noise parameters with spectrum analyser, modulation analyser and perform wireless link level functional evaluation to complete the product characterization

· Collaborate with product engineers for various certification procedures and NPI, followed by the Transfer of Technology (ToT) for large quantity production

Job Requirements

· Bachelor’s, Master’s, or PhD in Electronics Communication Engineering or Digital Communication Engineering

· Minimum 4 year of experience as a RF system hardware with proven track record of meeting industry delivery standards in the relevant areas

· Good interpersonal and creative skills with the ability to multitask in a demanding and fast paced environment

· Hands-on experience in the design and integration of RF, Analog, and Mix signal blocks such as PA, LNA, mixer, frequency synthesizer, filter, coupler, detector, microcontroller, etc., supplemented with knowledge of specification derivation from system level requirements

· Experience working with basic CAD tools and competence in evaluation flow and operation of appropriate test equipment to evaluate product performance

· Experience in script writing such as Bash, python etc., will be a plus as it is used in test automation

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, Design Verification

Responsibilities:

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.

• Develop test plans at block, sub-system, and chip level.

• Execute SoC-based verification at full-chip.

• Write C-based lib packages and tests.

• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.

• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.

• Automating the test environment for randomized testing and scoreboarding.

• Utilize advanced debugging techniques to identify and resolve design and verification issues.

• Perform root-cause analysis and work with design teams to fix identified issues

• Define and track functional and code coverage metrics to ensure thorough verification.

• Ensure that verification quality meets or exceeds industry standards and project requirements.

• Edge-based AI inference is preferred.

Requirements

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification

• Should have delivered multiple chips functioning to Specification.

• Identify and manage verification deliverables, milestones, and schedules.

• Proactively identify potential verification risks and develop mitigation strategies.

• Collaborate with design, architecture, and software teams to understand and verify design intent.

• Communicate verification progress, issues, and results to stakeholders and management.

• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges

• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.

• C-based verification in an SoC environment is required

• Experience with ARM processor-based designs and low-power design techniques is a plus.

• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile

• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5

• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

(A) Essential Job Functions:

The Design Engineer (Geotechnical) is responsible, but not limited to, the following:

• Coordination of Geotechnical works for construction.
• To attend meetings with Client, subcontractors and consultants, etc.
• Attend to site issues, ensuring timely response of RFI, coordinate CO substantiations, material costing and estimation.
• Liaise closely with internal and external parties as well as the authorities to resolve structural design discrepancies and construction issues.
• Coordinate with consultants an liaise with authorities for updates and submissions of project design.
• Manage and resolve production, quality, design & engineering and schedule issues.
• Liaise and coordinate with other stakeholders and consultants on the design and technical issues relating to temporary works.
• Any ad-hoc duties assigned by supervisor.

(B) Minimum Qualifications/ Job Experience:

• Minimum Degree holder in Civil/Structural Engineering or Geotechnical Engineering or its equivalent.
• At least 3 years of engineering experience in the Construction industry.

(C) Knowledge/ Skills/ Abilities:

• Working knowledge of general construction knowledge, especially in Civil Projects.
• Good verbal and written communication skills.
• Strong organizational and interpersonal skills.
• Strong time management skills with exceptional attention to detail and ability to manage multiple tasks/projects at one time.
• Ability to analyse and synthesize complex issues quickly.
• Able to work overtime and be on standby when required.

Senior Radio Frequency Design Engineer

About Doodle Labs

Doodle Labs is the global leader in high-performance private wireless systems. We build cutting-edge mesh networks for robotics, drones, and the Industrial Internet of Things. Doodle Labs has experienced rapid growth over the past five years as our radio systems have been adopted by Fortune 500 companies (e.g. Airbus, General Electric) and industry-leading innovators (e.g. Boston Dynamics, FLIR).

Your Opportunity

Doodle Labs develops market-leading broadband mesh radios. Products include handheld mesh hotspots (Wearable Smart Radio) and tiny embedded multi-band radios for robots (Helix). Your opportunity is to build novel RF products while implementing Doodle Labs’ patented RF techniques. You will design and develop next generation wireless communication systems utilizing Wi-Fi 4/5/6/6E chipsets and protocols. As a senior member of the engineering team, you’ll have the opportunity to lead projects with the support of a cross-functional team of RF engineers, technicians, software engineers, etc.

Job Description

· Perform detailed radio frequency translation plans and architectures

· Evaluate gain, noise parameters (NF, SNR), dynamic range, linearity, and power consumption analyses to execute a predictable, robust design

· Collaborate with CAD engineers and drive PCB implementation of the design with emphasis on clean power supply design, interconnect design for required EMI and RF transmission performance

· Participate in design reviews and prepare design documentations at every stage of development until the final prototype test and characterization

· Perform parametric evaluation of transceivers, like Pout, IMD/IP3, EVM, noise parameters with spectrum analyser, modulation analyser and perform wireless link level functional evaluation to complete the product characterization

· Collaborate with product engineers for various certification procedures and NPI, followed by the Transfer of Technology (ToT) for large quantity production

Job Requirements

· Bachelor’s, Master’s, or PhD in Electronics Communication Engineering or Digital Communication Engineering

· Minimum 8 year of experience as a RF system hardware with proven track record of meeting industry delivery standards in the relevant areas

· Good interpersonal and creative skills with the ability to multitask in a demanding and fast paced environment

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, RTL Design

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 5-8 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 & 14001 processes.
• conducts design reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Project Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• AutoCAD and solid works proficiency
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment
• MS Office proficiency

Responsibilities:

• Fully responsible for Netlist-to-GDS physical design implementation of low power chips

Requirements:

• Bachelor/Masters Degree in Electrical/Computer Engineering
• 3-6 yrs Experience in physical design with tape-outs
• Knowledge of complete Netlist-to-GDS flow, Synopsys/Cadence tools like ICC or Encounter
• Good in script programming with Perl, TCL/TK or other languages

Please apply here: https://talent.sage.hr/jobs/12fc69c2-7012-4edc-b214-bb9c2ded1da2

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for IC Design Research Engineers with the following backgrounds:

- Digital IC Design

- Analog IC Design

As an IC Design Research Engineer, you will design and innovate secure circuits and systems for next-generation low-power IoMT devices and sensors, focusing on hardware security, and smart computing and connectivity platforms.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

RTL Lead Engineer

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 10-12 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Senior Design Engineer work in conjunction with Clients, Consultant, Contractors and Sub-Contractors in order to oversee the design and construction of a project. Additional responsibilities include reviewing project bids, review of design drawings, checking and submission of shop drawings and arch materials for approval, and accurate representation of the best interests of the overall project is a major aspect of the coordinator's duties.

Key Accountabilities :-

• Coordination with Client, Consultant, System Wide Contractors and Architectural Sub-Contractors
• Compliance with various regulations by the government and requirements set by the client
• Review and interpret plans, provide schedules, check shop drawings and method statements, submit architectural materials for approval, provide progress report to client
• Oversee various Architectural Sub-Contractors work, highlight interfacing with various SWC, comply with schedules, meet the standards of client
• Assist consultant and client to carry out Architectural RI inspection
• To ensure all works are carried out in line with LAIO health and safety standards in order to provide high quality works in a safe and efficient manner

Requirement:-

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Architecture or equivalent
• At least 5 Year(s) of working experience in the related field is required for this position
• It is a requirement to have Civil Infrastruture and LTA MRT Project experiences
• Exposure to design and building contract
• Able to work independently with minimum supervision
• Strong interpersonal skills and ability to communicate at all levels
• Required Skill(s): MS Office, Computer Literate (Microstation, AutoCAD 2D and 3D), report writing

Position Overview:

We are seeking a skilled Physical Design Engineer to join our team. As a Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Assist in the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 2-4 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Excellent problem-solving skills and ability to work effectively in a team environment.

• Design of control systems, instrumentation, cabling and cable support systems for Process equipment, Industrial Facilities and Commercial Buildings, with the support of a senior engineer if necessary;
• Design of Life Safety System comprising of Public Address Systems, Access control, Closed Circuit Television, Gas Detection and Fire Alarm systems with the support of a senior engineer if necessary;
• Design of Information Technology cabling system with the support of a senior engineer if necessary;
• Develop P&IDs, Instruments and IO list, Sequence of Operations, Logic Diagrams, Cause and effect matrices with the support of a senior engineer if necessary;
• Develop / Execute / Expedite ELV packages during design, procurement, construction phase of a project and taking responsibility for the assigned packages;
• Co-ordination and scheduling activities for the ELV supervisors on a project to ensure timely delivery at project milestone dates;
• Interfacing with other trades during design phase and incorporate their requirements into the ELV systems design;
• Technical Evaluation of vendor submissions including approval of shop drawings;
• Preparing the procedure for testing and commissioning of individual system and manage subcontractor during commissioning of the Extra Low Voltage systems;
• Guiding Designer / Draftsman for preparing cable routing plan, hookup drawings, wiring drawings, cable schedule, Junction Box schedule, Instrument Air manifold schedule, Block diagrams, P&IDs, Control System Schematic.

Requirements

• Minimum 4 years of relevant experience
• Good technical knowledge and understanding of Engineering Design and Construction for Basic Electrical Equipment and distributions concepts
• Basic knowledge of Project execution processes.
• Advanced knowledge of local code of practice of design implementation.
• Local construction knowledge

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Roles & Responsibilities

The responsibility of this position is to lead the project assigned to successful completion within the project schedule & scope as well as obtain the targeted profit and achieve high customer satisfaction.

The incumbent shall carry out the following responsibilities, but not limited to:

• Resolve complex issues with clients & consultants, JV partners, and/or sub-contractors which are not able to be handled by subordinates.
• Direct project team members to achieve targets of safety, quality, profit and timely completion of the project. To monitor the progress of the project according to the targets set.
• Identify key staff to lead the project and delegate responsibilities. Provide guidance and direction to staff for them to work towards the targets set.
• Personnel management and development.
• Oversee the tender works including providing directions on planning, construction technique, quality of tender submission documents, risk and issue management, tender price negotiation with suppliers and subcons for finalization.

Requirements:

• Candidate must possess at least a Bachelor's Degree majored in Civil Engineering recognised
• Minimum 6 years of local experience in construction industry
• Experience in Road Works / Building Works Project will be preferred
• Proven working experience in project management
• Excellent client-facing and internal communication skills
• Independent and organised with positive work attitude
• Possess strong written
• Good decision maker and team player
• Auto Cad designing
• Class 4 with Forklift licence

Their duties and responsibilities include:

• Preparing and interpreting blueprints, technical drawings, and plans
• Collaborating with architects, contractors, and other construction professionals
• Planning, directing, and managing the site workforce and subcontractors
• Ensuring that all building procedures and materials comply with building codes, regulations, and standards
• Carrying out surveys and assessing the suitability of construction sites
• Performing quality control tasks on budgets, plans, materials, and the final product
• Inspecting and reviewing projects to monitor compliance with building and safety codes, and other regulations
• Assessing potential risks and drafting mitigation plans
• Providing technical advice and solving problems on site
• Ordering and managing resources and materials to meet project deadlines
• Preparing reports regarding job status and progress to stakeholders

Working Area: East, Kaki Bukit

Responsibilities:

Provide general administrative support to department

Data entry, filing, scanning and documentation work,

have knowledge of renovation works or strive to learn, will need to attend client enquiry.

Ad hoc administrative duties as assigned

Handling business processes

Liaise with Clients & Suppliers

Requirements:
Diploma in any field with at least 1 year of experience

Basic electric knowledge or AutoCAD will be an advantage.

Basic Interior design knowledge will be an advantage.

Working Day & Timing:

Working Day & Timing: 5.5 days work week

Monday to Friday: 9am - 6pm

Saturday: 9am – 1pm

Noted: company location:94B Jalan Senang S418469

• Working Days: 5 days’ work week
• Working Hours: 8:15 am–6 pm (Mon-Fri)
• Office Location: Joo Koon Crescent
• Salary Range: $2500 - $3500

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Job Description

• Position: Senior Mechanical Design Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $7,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Responsible as the lead for the overall Mechanical engineering project activities.
• Responsible for optimized Mechanical engineering man hour utilization within the project.
• Coordinate between the other trades & internal for engineering integration.
• Coordinate with Project Lead on Project Engineering’s & Procurement Schedule.
• Prepare & Review Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities.
• Review Vendors’ Technical Specification/ drawings to ensure completeness & correctness with our requirement.
• Prepare & Review Equipment Parameter & Mandatory Calculation.
• Prepare & Review Piping Schematics (P&ID).
• Prepare & Review Machinery & HVAC Layout, Equipment Installation & Alignment.
• Prepare & Review Mechanical design and construction standard.
• Review 2D and 3D for piping detail and production design.
• Prepare & Review Testing Protocol & Operation Manual.
• Guiding and checking Mechanical engineer activities.

Requirements:

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of relevant work experience in marine/offshore industry machinery and piping new-building engineering design.
• Proficient in AutoCAD, Microsoft Office, and AVEVA.
• Knowledgeable about rules and regulations from Classification Society and Authorities.
• Familiar with the theory and calculations related to marine/offshore mechanical and piping design.
• Strong communication and analytical skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257