Job Description:

• Support and execute data gathering and execution of validations, qualifications and stability studies to support the manager;
• Comply with Quality and HSE procedures when carrying out sampling and QC tests and release.
• Identify OOS, deviations and quality problems
• Review/Approve testing documentation and test records
• Maintain integrity, accuracy and completeness of QC data and records
• Report equipment OOS issues
• Ensure smooth operation of daily team activities
• Performs any other duties as assigned by Supervisor according to business needs

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Benefits Summary:

• Up $3500 + Bonus + Benefits
• 5 Days work week
• Working Location: West
• MNC with good working environment

Responsibilities:

• Assist in the overall management and technical operations of the marine fleet
• Attending to vessels docking, repairs of the marine high speed engine and class surveys when required and supervise the contractors' maintenance works
• Handle the daily operation of the port limit bunker barges
• Work closely with the team to ensure smooth implementation and compliance of the safety
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Alternatively, you may also email your resume to us at [email protected].

Follow us on Facebook for more info:
https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

Edward TOH
Registration No: R1658602
EA License No: 20C0278

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a Electrical and Instrument Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Job Responsibilities of Electrical and Instrument Engineer:

• Review project specs to ensure equipment design meets contract requirements.
• Prepare, review, and approve instrumentation and electrical deliverables (e.g., lists, data sheets, diagrams, schedules).
• Create material requisitions and perform technical bid evaluations for electrical and instrumentation equipment (e.g., transformers, MCCs, flowmeters, control valves).
• Develop engineering standards and procedures for design and production.
• Monitor project costs, timelines, and compliance with technical specifications.
• Attend technical and HAZOP review meetings to address client feedback.
• Support plant start-up, commissioning, troubleshooting, and manual preparation.
• Provide technical support to sales, engineers, and project managers.
• Self-manage daily engineering tasks while adhering to health and safety protocols.

Requirements

• Bachelor’s degree in engineering discipline
• 5 years’ E&I experience in water treatment industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

CD Engineers is a well establish engineering company dedicated to providing practical and cost-effective designs for storage and use of flammable and hazardous material in industrial applications to our client from conceptual to detailed design to authorities permitting and project construction.

To support our growth, we require energetic innovative engineers to assist in:

· Conceptualizes concept and schematic designs.

· Execute feasibility studies and presents design proposals.

· Preparation of tender documentation, schedules and specifications.

· Liaises and coordinates with clients, consultants and contractors.

· Ensure design quality and authority compliance.

· Attend design and project meeting.

· Prepare work schedule and progress report.

Requirements:

· Degree or Master in Sciences or Engineering.

· Fresh Graduate will be considered for entry level.

· Strong in communication skill and proactive in solving issues.

· Ability to work independently and within a team.

· Those with experience in building services industry background are welcome.

· In-house training for specialised skill will be provided.

Job Description

• Manage project cycle to meet the deadline.
• Coordinate with external parties and customers to plan, organize and direct activities concerned with assigned projects.
• Develop project schedules in compliance with customer requirements, deadlines, and/or milestones.
• Develop mechanisms to track schedule progress in the field and update the schedule regularly.
• Responsible for site activities, coordination and supervision works related to engineering and system design.
• Ensure timely completion of all projects particularly the T/C schedules.
• Responsible for project management including attending meetings, coordination, design etc.
• Create AutoCAD Drawings, Submission & Documentation Responsible for completion of project which involves go on site troubleshooting, Testing & Commissioning and meetings.

Requirements

• At least 2 Years of local working experience in the related field is required for this position.
• Ability to work independently and target oriented in a fast-paced environment.
• Able to visit job site.

Job Highlights

• Great opportunities for learning & career advancement
• Positive & friendly working environment
• Medical insurances and dental coverage

Job Description

Engineer – Full time permanent

Work location – 37 Kaki Bukit Place S416215

Company background – Wire harnessing & mechanical assembly

Salary - $3,200 ~ $3,600

Benefits – Group Medical/GPA Insurance/AWS/VB/Dental

Working hours – Monday to Friday 8am to 5.30pm

Responsibilities

• NPI activities
• Product costing
• Ensure engineering quality standards are meet accordingly.
• Ensure all drawings are well maintained.
• Confirmation on drawings for new and existing models.
• Generate of Engineering reports/documents.
• Training of QC inspector on inspection procedures.
• Co-ordinate with internal department to carry out project/models.
• Carry out job/backup assigned by Superior.

Requirements

• Diploma in Electrical/Electronics/Mechanical Engineering or related discipline.
• Industrial engineering background
• Team Player / Independent / Initiative.
• Good time management and able to multi-task in fast paced environment.

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Project execution and implementation activities for energy monitoring systems projects.

Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

Record and maintain proper project documentation record

Requirements:

Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

Preferably with experience in Energy Monitoring System

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

As Facilities Utilities Engineer of Global Construction team, you will be an integral member of the Global Facilities Line Planning Group responsible for overseeing and managing the analytical duties related to facility utilities planning program, assisting in the planning and design of facilities construction and expansion projects. You will be responsible for managing Micron Facility utilities consumption assessment process, analyzing facility future needs and resource utilization analysis.

In this role, you manage utilities related projects, programs and will help to plan and prioritize resources needed to achieve results and assure accurate tracking of projects and programs to predict results and outcomes critical to success.

Responsibilities

• Collect, classify, evaluate utilities data and information used in supporting the facilities utilities consumption management and capital program.
• Create reports, charts, graphs and eventual monitoring system for Facilities Services.
• Define, manage and improve on Micron Tools Utility Matrix (TUM) Business Process.
• Drive network alignment among Micron sites in tools utility matrix (TUM) database.
• Drive network alignment across sites in Tools’ process independent utilities database and eventually moving towards alignment for Tools’ process dependent utilities database.
• Work closely with Teams from Global and Site Facilities, Global Planning, Facilities Transfer Team, CPEE & IEs to coordinate and drive facility utilities estimates for new layout, technode scenarios.
• report program status, wins, issues, and actions to program sponsor for broadcasting to global leadership team and stakeholders
• Ensure Roles, Responsibilities and Accountabilities are fully understood by the participated teams

Skills / Qualifications

Minimum Qualifications:

• The candidate should possess a BSc or Beng in Engineering from a recognized institute of higher learning.
• Experience in wafer fab facilities systems is highly valued.
• Candidates with experience in facilities operation & construction.
• Minimum 3 years of Facility or Equipment tool Management experience in Semiconductor manufacturing environment
• Demonstrable experience in the Facility or Equipment tool utilities Management and/or other relevant industries is strongly preferred.

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Technical support for Protection Projects/Services

Handling testing and commissioning activities at site

Perform wiring check in workshop and at site

Project Management

Requirements:

Diploma/Degree in Electrical/Electronic Engineering from a recognised Polytechnic/University

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Planning, coordination, and execution of substation automation projects.

Design, costing and integration of substation automation systems according to project requirements.

Installation, testing and troubleshooting of substation automation systems at site.

Preparation of project documents and drawings.

Requirements:

Diploma in Electrical Engineering/Computer Engineering

Knowledge of data communication and Automation Systems for Electrical Network

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Planning, coordination, and execution of substation automation projects.

Design, costing and integration of substation automation systems according to project requirements.

Installation, testing and troubleshooting of substation automation systems at site.

Preparation of project documents and drawings.

Requirements:

Diploma in Electrical Engineering/Computer Engineering

Knowledge of data communication and Automation Systems for Electrical Network

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Technical support for Protection Projects/Services

Handling testing and commissioning activities at site

Perform wiring check in workshop and at site

Project Management

Requirements:

Diploma/Degree in Electrical/Electronic Engineering from a recognised Polytechnic/University

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Project execution and implementation activities for energy monitoring systems projects.

Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

Record and maintain proper project documentation record

Requirements:

Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

Preferably with experience in Energy Monitoring System

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Project execution and implementation activities for energy monitoring systems projects.

Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

Record and maintain proper project documentation record

Requirements:

Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

Preferably with experience in Energy Monitoring System

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Project execution and implementation activities for energy monitoring systems projects.

Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

Record and maintain proper project documentation record

Requirements:

Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

Preferably with experience in Energy Monitoring System

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

As a member of the HIG HBM Media Health HVM team you will lead and develop a high-performing products driving Media Health Manufacturing and activities within the HBM Product and Systems Engineering Team. You will lead a portfolio of Best-In-Class Next Generation HBM Product focused on the critical KPI’s Quality, Cost, Cycle Time and Scale. You will collaborate across functions within and outside of HBM to meet both strategic and tactical objectives while continually maximizing the effectiveness of the HIG HBM PE organization.

Key Responsibilities

• Optimized Test Coverage: The responsibility of ensuring optimized test coverage on all current and future HIG HBM design architectures and process nodes is a technical aspect of this role. This is crucial for maintaining the effectiveness and efficiency in high-volume manufacturing.
• Promotion of Innovation: The role involves promoting innovation and driving for changes that will provide Micron with a technical advantage over its competition. This is vital for maintaining Micron’s competitive edge in the market.
• Product Development and Validation: This role is pivotal in developing, validating, characterizing, and qualifying Micron’s next-generation HBM products. Ensuring that these products are reliable and meet the necessary standards is a technical task that directly impacts the market readiness of the products.
• Support for New Product Design Validation: The role provides support for design verification and in-depth circuit of new products using CAD tools and Verilog simulations. This technical support is crucial for the development of new products and technologies.
• Yield Improvement and Cost Reduction: The role involves technical tasks like improving manufacturing test yields (Specifically related to Device Issues from the DRAM, Interface and Stacked Die Yield), reducing test time, and resolving yield-related issues. These activities are critical for cost reduction and meeting yield targets.
• Root Cause and Resolution of Qual and RMA Device Issues.
• Process Conversions and HVM: The role involves providing recommendation to fab teams for new process conversions to reduce cost, increase yields. This is critical as it directly impacts the yield, quality, reliability, and performance of NAND products, which are key components in many modern technologies.
• Risk Management: The role requires communication with Product Managers/Leads to manage risks associated with DPM process conversions. This is crucial in ensuring that the conversions move at an appropriate pace, balancing the need for innovation with the need for stability and reliability.
• Project Management: Developing project management skills within the team ensures efficient execution of projects, leading to timely delivery of technological solutions.
• Technical Decision Making: The role involves making final decisions on risk analysis and project prioritization. These decisions directly impact the direction of technological development.
• Cross-Functional Collaboration: This role necessitates collaboration with various cross-functional teams such as Fab, HBM Technology Development, HBM Design, System Development, and Quality/Reliability team. This collaboration is vital for the holistic development and shipping of end products.

Requirements

• Bachelors/Masters Electrical Engineering Degree with at least 1 year of experience in the semiconductor industry.
• Experience in CMOS device design, simulation, characterization and development of Analog/CMOS transistors operating at higher Voltages.
• Programming skills/experience in Python; logic gate and transistor operation knowledge; circuit simulation or circuit debug skills/experience.
• Dedicated and highly motivated with a flexible approach towards adapting to different roles in a dynamic working environment (from leading the team to leading technical programs).
• Proven track record of collaborative work within/across teams to address sophisticated business and engineering problems.
• Strong sense of responsibility and accountability towards assigned role with professional work ethic.
• Work on site in Singapore with international travel to USA, Taiwan and Japan.

SIMTech is looking for a highly motivated, independent, and innovative Software / DevOps engineer to join Sustainability Informatics & Strategy (SIS) Group. The successful candidate is expected to be creative and team-oriented, finding innovative solutions to new challenges and managing the software development life-cycle using Scrum / agile approaches. The candidate will work closely with other developers, UX designers, data scientists and engineers to deliver quality systems in a timely fashion.

JOB DESCRIPTION

The successful candidate is expected to contribute to Software Development and DevOps activities in the research area of sustainability, where they will be working alongside a team of full-stack developers, and with scientists and engineers, to perform tasks including:

• Design and develop backend web applications and database schemas
• Deploy, scale and configure cloud applications
• Manage source codes and maintain workflows for version control
• Fix and troubleshoot code issues and technical issues
• Perform program coding & testing in compliance with approved life cycle methodologies
• Resolve application-based issues through debugging, research, and investigation

JOB REQUIREMENT

• Degree in Computer Science/Engineering (or equivalent experience).
• Proficiency in at least two of the following:
• Frontend technologies and frameworks (i.e. React, Angular)
• Python web frameworks (e.g. FastAPI)
• SQL Databases, and ORMs (e.g. SQLAlchemy)
• Prior experience using source control systems, specifically Git. While in-depth knowledge of advanced features is not required, candidates should understand the basic functions such as committing changes, pushing to repositories, and pulling updates.
• Preference for candidates with working knowledge of DevOps (AWS Cloudformation/ IAM) and AWS Cloud Services (Cognito, Amplify, API Gateway, S3, RDS, Lambda)
• Preference for candidates with a basic understanding of Tableau for creating data visualizations. Training or coursework involving Tableau or similar data visualization tools is preferred, though hands-on professional experience is not required
• Ability and willingness to learn new technologies quickly
• Ability to communicate complex procedures to other colleagues
• Strong hands-on capabilities
• Diligent and possess a positive work attitude
• Good communication, writing and presentation skills

SIMTech is looking for a highly motivated, independent, and innovative Software / DevOps engineer to join Sustainability Informatics & Strategy (SIS) Group. The successful candidate is expected to be creative and team-oriented, finding innovative solutions to new challenges and managing the software development life-cycle using Scrum / agile approaches. The candidate will work closely with other developers, UX designers, data scientists and engineers to deliver quality systems in a timely fashion.

JOB DESCRIPTION

The successful candidate is expected to contribute to Software Development and DevOps activities in the research area of sustainability, where they will be working alongside a team of full-stack developers, and with scientists and engineers, to perform tasks including:

• Design and develop backend web applications and database schemas
• Deploy, scale and configure cloud applications
• Manage source codes and maintain workflows for version control
• Fix and troubleshoot code issues and technical issues
• Perform program coding & testing in compliance with approved life cycle methodologies
• Resolve application-based issues through debugging, research, and investigation

JOB REQUIREMENT

• Degree in Computer Science/Engineering (or equivalent experience).
• Proficiency in at least two of the following:
• Frontend technologies and frameworks (i.e. React, Angular)
• Python web frameworks (e.g. FastAPI)
• SQL Databases, and ORMs (e.g. SQLAlchemy)
• Prior experience using source control systems, specifically Git. While in-depth knowledge of advanced features is not required, candidates should understand the basic functions such as committing changes, pushing to repositories, and pulling updates.
• Preference for candidates with working knowledge of DevOps (AWS Cloudformation/ IAM) and AWS Cloud Services (Cognito, Amplify, API Gateway, S3, RDS, Lambda)
• Preference for candidates with a basic understanding of Tableau for creating data visualizations. Training or coursework involving Tableau or similar data visualization tools is preferred, though hands-on professional experience is not required
• Ability and willingness to learn new technologies quickly
• Ability to communicate complex procedures to other colleagues
• Strong hands-on capabilities
• Diligent and possess a positive work attitude
• Good communication, writing and presentation skills

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands Ave 9

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Electrical and Control Design Engineer | Up to $5.8k | 5 Days | Woodlands

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands Ave 9

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands Ave 9

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215