Maintain budgets and adjust according to needs as they arise.

Track performance and analyse the completion of key goals.

Document and report project progress to stakeholders and clients.

Problem solving skills with for to manage the pressurised situations.

Coordination and good communication with our own team for project support and sharing experience.

Job Responsibilities:

• Will be assigned to a project to provide technical support and department relevant responsibilities.
• Assisting C&S lead/technical manager & in charge for all civil / structural engineering matters being tasked
• Attending and being proactive in design coordination meeting with consultants / client.
• Preparing and reviewing of shop drawings / materials / MOS
• Ensure drawing registry is maintained and latest drawings / BIM models are available for all parties involved (site staff, CTD, suppliers and subcontractors).
• Ensure transmittal forms / emails are issued for latest drawings / BIM models when issued to CTD, suppliers and subcontractors.
• To study & review drawings / specifications in identifying discrepancies and issue queries to consultants accordingly via RFI
• Resolve technical issues on drawings and liaise closely with Consultants, all trades and authorities.
• Ensure BIM team update the drawings / BIM Model with the latest information available timely.
• Upkeep all submission, response for the submission and approval. Monitor the status of the submission and pursue response from the relevant parties once the response is due.
• Prepare as-built drawings / BIM Model and compile O&M Manual for submission.
• Attending VDC for civil / structural related matters. Cross check BIM model with contract drawings.
• To ensure works are carried out in accordance with drawings, specifications and PE design.
• To ensure material testing are carried out in timely manner and as per the specifications.
• To identify and resolve any potential site issues at the work site from technical aspect
• Attending sub-con meetings and technical meetings for structural related matters; prepare and circulate meeting minutes in a timely manner.
• Ensure all structural submissions (as-built, ST COS etc) are done prior to TOP application.
• Work with senior, PM and Site Manager in planning and executing temporary works.
• Preparing as-built drawings and submission of O&M.
• Assisting senior for structural matters related to CONQUAS assessments / submissions.

Job Requirements:

• Degree in Civil / Structural or a related discipline
• A minimum of 3 years of relevant experience for Structural engineer & 6 years of relevant experience for Senior engineer
• Proficient in Microsoft Office, AutoCAD and proficiency in BIM.
• Understanding of structural engineering principles and practices.
• Knowledge of authority submission requirement
• Able to communicate with consultants, client, authority/government agencies and site supervisors.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd

16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Responsibilities:

• The Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification.
• It is also expected that you will conduct periodic design reviews, including with application engineers.
• It is also expected that you will support test development and product development teams in bringing projects to production.

Requirements:

• PhD/Master’s Degree in Electronics/Electrical Engineering.
• Minimum 6 years’ experience in Analog or Mixed-signal IC design.
• Very good knowledge of CMOS processes.
• Highly proficient in analog and mixed-signal IC design EDA tools.
• Experienced in analog and mixed-signal circuit designs, such as regulators, DC-DC converters, low-power, low-noise biasing circuits and amplifiers, sigma-delta modulation and ADCs, etc
• Experience in design of high resolution, low power sigma-delta modulation preferred.
• Experience in design of ultra low power ADC preferred.
• Skilled in laboratory testing of IC prototypes.
• Knowledge of Linux operating system required.
• Experience in MEMS interface ASIC design advantageous.

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Location: Redhill

Basic + Commission + VB

JD:

• Research market trends, competitor offerings, and emerging client needs within sectors like commercial office/Retail design & renovation
• Proactively seek out and generate new business leads through networking, events, industry associations, cold call and referrals.
• Draw up networking proposals customized to individual sector
• Liaison between client, designer and other parties leading up to the securing of project, while ensuring client’s requirements are met and exceeded
• Prepare sales and marketing materials
• Work on project pricing, contracts, and fee negotiations that balance profitability with competitive positioning.
• Achieve and Deliver Sales Target
• Support in all aspect of Sales activities
• Manage and maintain clientele relationship
• Collate and evaluate client feedback and highlighting client feedback from customers for management analysis and follow-up

Requirement

• Diploma in Marketing, Business, Interior Design, or a related field.
• Min 3 years of experience in Business development, preferably in the interior design on commercial office/retail.
• Strong communication and interpersonal skills, with an ability to understand design concepts & to liaise with individuals at all level
• Committed, sales target driven and self-motivated
• Responsible and team player.
• Creative mindset with a passion for interior design.
• Excellent networking & communication and negotiation skills, with the ability to liaise with individuals at all level
• Committed, sales target driven and self-motivated

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Employer Background:
The employer is a prominent player in the precision engineering sector, specializing in the manufacturing of high-quality metal components. They are known for their advanced engineering capabilities and commitment to delivering tailored solutions to meet customer needs.

Overview:
Join a dedicated team as a Design Engineer, where you will contribute to the design and development of precision engineering solutions, focusing on automation systems and custom fixtures.

• Position: Design Engineer
• Industry: Precision Engineering
• Department: Design and Engineering
• Employment Type: Full-Time
• Working Days & Hours: 5 Days, Monday to Friday, 9:00 AM to 6:10 PM
• Work Location: Within Central Location at Macpherson
• Salary Range: Up to $4,500 Monthly Basic (Based on Relevant Experience)

Job Responsibilities:

• Create schematic diagrams and manufacturing drawings for automation systems and jigs & fixtures, utilizing AutoCAD and/or SolidWorks.
• Collaborate closely with engineers and coordinate with customers to ensure that manufacturing drawings meet specifications and requirements.
• Assist in the design and engineering process to enhance manufacturing efficiency and product quality.

Requirements:

• Experience: Minimum 1 year of relevant working experience, preferably in the manufacturing automation or jig & fixture industry. Entry-level candidates are welcome to apply; training will be provided.
• Education: Minimum educational qualification: Nitec / Higher Nitec / Diploma / Degree in Engineering (Any Major).

Recruit Lync Pte Ltd | EA License Number: 22C1000
Poon Weng Teik (Wilson) | EA Personnel License: R1657737

Key Responsibilities:

• Prepare and produce 2D and 3D drawings using AutoCAD
• Develop layout plans, elevations, sections, details and perspective drawings
• Liaise with site supervisor and technical coordinator for any drawings changes and amendment
• Liaise with Main Contractor for shop drawing submission
• Amend drawings to be used for site construction
  

Requirements:

• Minimum diploma in architectural, engineering or construction related background
• Minimum of 2 years hands-on experience on AutoCAD
• Proficiency in BIM software is preferred
• Proficiency with MS Office application
• Experience in steel, aluminium and metal works industry is preferred

Responsibilities:

• Work as a team leader. Overall control the entire Design Department.
• Preparing Shop drawings, tender drawing, fabrication drawings, cutting list etc. 3D drawings. Monitor and control the progress and quality of drawings provided by the whole team.
• Attend meetings related to tender, design discussion, design optimization, critical design resolutions.
• Liaise with Client, Main Contractor, Architect and Consultants for design & technical issues.
• Oversee fabrication work and overall project coordination. Provide technical support and guidance to the project team on site.
• Stay updated with the latest industry trends and technologies in aluminium facade design
• Report to the Director.

Requirements:

• At least 6 year experience in Alum and Glazing Design design works.
• Responsible, with good organizational and communication skills. Able to work as a team leader.
• Strong understanding of building codes, standards and construction techniques
• Excellent attention to detail, problem-solving and communication skills
• Bachelor’s degree in architecture, Engineering or a related field and above.
• Singapore Citizen and Permant Residence are preferred. (Foreigners with relevant experience will also be considered)

Position: Management Executive
Company: The Design Factory
Location: Singapore
Salary Range: SGD $4,000 - $6,500 per month
Employment Type: Full-Time

About Us

We are a dynamic and innovative interior design firm dedicated to transforming spaces and creating exceptional experiences for our clients. As a growing company, we are seeking a talented and driven Management Executive to join our team and contribute to our continued success.

Job Description

As a Management Executive, you will play a critical role in ensuring the smooth operation and strategic growth of our firm. Your responsibilities will include:

1. Operational Management: Oversee daily business operations, including resource allocation and workflow optimization. Develop and implement efficient processes to enhance productivity and project delivery.
   
2. Client Relationship Management: Act as a key point of contact for clients, ensuring exceptional service and satisfaction. Assist in client presentations, meetings, and follow-ups.
   
3. Project Coordination: Collaborate with design teams to ensure project milestones and deliverables are met.
   Monitor project timelines, budgets, and quality standards.
   
4. Team Support: Assist in recruiting, onboarding, and training staff as needed.
   Provide administrative support to senior management.
   
5. Strategic Development:Contribute to the development and execution of business strategies to achieve organizational goals. Analyze market trends and assist in identifying growth opportunities.
   

Requirements

We are looking for a candidate who possesses the following:

• Education and Experience: A diploma or degree in Business Management, Interior Design, or a related field.
  At least 3 years of relevant experience in management or a related role.
  
• Skills and Competencies: Strong organizational and multitasking skills with a detail-oriented mindset.
  Excellent communication and interpersonal abilities.
  Proficiency in MS Office Suite and project management tools.
  Familiarity with the interior design or construction industry is a plus.
  
• Personal Attributes: A proactive and solution-driven attitude.
  Strong leadership capabilities and the ability to work effectively in a team environment.
  Creative problem-solving skills and adaptability in a fast-paced setting.

What We Offer

• Competitive salary commensurate with experience.
• Opportunities for career growth and professional development.
• A collaborative and vibrant work environment.
• Exposure to high-profile projects in the interior design industry.

Job Descriptions:

• Position : HVAC Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $6,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Engaged in all mechanical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Participated in design and construction document preparation and submissions.
• Conducted technical review and clarifications with customer and suppliers.
• Coordinated design efforts with other engineering disciplines.
• Participated in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Monitor the progress of the document submission.
• Performed some drafting scope and also guide drafters for drafting.

Requirements:

• Minimum Diploma/Degree in Engineering or related field.
• Relevant job experience in oil and gas/process/marine industry preferred.
• Must have basic mechanical design knowledge.
• Proficient in performing HVAC cooling capacity calculations, pressure drop calculations, and duct sizing.
• Experienced in duct installation and HVAC system installation.
• Skilled in creating piping and instrumentation diagrams (PID), Airflow diagrams, and ducting and instrumentation diagrams (DID).
• Knowledgeable in basic pipe sizing, selection, and pipe installation.
• Familiar with basic fire suppression systems.
• Proficient in using AutoCAD for drawing and design.
• Proficient in MS Office applications.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Descriptions:

• Position : HVAC Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $6,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Engaged in all mechanical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Participated in design and construction document preparation and submissions.
• Conducted technical review and clarifications with customer and suppliers.
• Coordinated design efforts with other engineering disciplines.
• Participated in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Monitor the progress of the document submission.
• Performed some drafting scope and also guide drafters for drafting.

Requirements:

• Minimum Diploma/Degree in Engineering or related field.
• Relevant job experience in oil and gas/process/marine industry preferred.
• Must have basic mechanical design knowledge.
• Proficient in performing HVAC cooling capacity calculations, pressure drop calculations, and duct sizing.
• Experienced in duct installation and HVAC system installation.
• Skilled in creating piping and instrumentation diagrams (PID), Airflow diagrams, and ducting and instrumentation diagrams (DID).
• Knowledgeable in basic pipe sizing, selection, and pipe installation.
• Familiar with basic fire suppression systems.
• Proficient in using AutoCAD for drawing and design.
• Proficient in MS Office applications.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Description

• Position: Senior Mechanical Design Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $7,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Responsible as the lead for the overall Mechanical engineering project activities.
• Responsible for optimized Mechanical engineering man hour utilization within the project.
• Coordinate between the other trades & internal for engineering integration.
• Coordinate with Project Lead on Project Engineering’s & Procurement Schedule.
• Prepare & Review Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities.
• Review Vendors’ Technical Specification/ drawings to ensure completeness & correctness with our requirement.
• Prepare & Review Equipment Parameter & Mandatory Calculation.
• Prepare & Review Piping Schematics (P&ID).
• Prepare & Review Machinery & HVAC Layout, Equipment Installation & Alignment.
• Prepare & Review Mechanical design and construction standard.
• Review 2D and 3D for piping detail and production design.
• Prepare & Review Testing Protocol & Operation Manual.
• Guiding and checking Mechanical engineer activities.

Requirements:

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of relevant work experience in marine/offshore industry machinery and piping new-building engineering design.
• Proficient in AutoCAD, Microsoft Office, and AVEVA.
• Knowledgeable about rules and regulations from Classification Society and Authorities.
• Familiar with the theory and calculations related to marine/offshore mechanical and piping design.
• Strong communication and analytical skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Description

• Position: Senior Mechanical Design Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $7,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Responsible as the lead for the overall Mechanical engineering project activities.
• Responsible for optimized Mechanical engineering man hour utilization within the project.
• Coordinate between the other trades & internal for engineering integration.
• Coordinate with Project Lead on Project Engineering’s & Procurement Schedule.
• Prepare & Review Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities.
• Review Vendors’ Technical Specification/ drawings to ensure completeness & correctness with our requirement.
• Prepare & Review Equipment Parameter & Mandatory Calculation.
• Prepare & Review Piping Schematics (P&ID).
• Prepare & Review Machinery & HVAC Layout, Equipment Installation & Alignment.
• Prepare & Review Mechanical design and construction standard.
• Review 2D and 3D for piping detail and production design.
• Prepare & Review Testing Protocol & Operation Manual.
• Guiding and checking Mechanical engineer activities.

Requirements:

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of relevant work experience in marine/offshore industry machinery and piping new-building engineering design.
• Proficient in AutoCAD, Microsoft Office, and AVEVA.
• Knowledgeable about rules and regulations from Classification Society and Authorities.
• Familiar with the theory and calculations related to marine/offshore mechanical and piping design.
• Strong communication and analytical skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Responsibilities

• Oversee the preparation of tender and contract documents, including Bills of Quantities (BQ).
• Lead and review the costing, cost planning, and estimation process for tenders.
• Manage and support multiple M&E tender projects concurrently.
• Chair pre-tender meetings and allocate duties to team members during tender preparation.
• Supervise the preparation of preliminary design drawings and design calculations.
• Ensure compliance with client requirements, industry standards, and company policies.
• Review and approve budgets for M&E works to ensure alignment with financial objectives.
• Analyze and mitigate risks related to project cost control and budget adherence.
• Mentor and develop team members, ensuring alignment with organizational goals.
• Promote a collaborative and efficient work environment.
• Act as the primary point of contact between clients and internal departments.
• Address and resolve design and tender-related queries promptly and effectively.
• Ensure tenders and related documents are well-prepared, compliant, and submitted on time.
• Maintain comprehensive records of all tender activities.
• Perform other responsibilities as assigned by senior management.

Requirement

• Diploma/Degree in Mechanical/Electrical Engineering or related field
• Minimum 5 years of experience
• Familiar with tendering, project cost control in M&E works
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Job Description

You will be responsible for producing Autocad and BIM (Revit drawings), coordinating with consultants and subcontractors the BIM Model for the project. Attending BIM weekly meetings, coordination meetings and ensuring that submittals are in line with the Singapore BIM Guidelines and Project BIM requirements and Project timelines / programme.

Key Responsibilities

• Create and update BIM Models based on contract drawings and latest information
• Maintaining standards throughout the various stages of the design drawings and following the Design workflow
• Ensuring compliancy with local standards and International Building Codes (BCA Guidelines and Singapore BIM Guidelines)
• To support the Site Manager and Coordinators by providing BIM Model deliverables for Construction, documentation and fabrication

Skills Requirements

• Proficient in BIM, Revit, Autocad and Rendering softwares
• At least 2 Year(s) of relevant experience in Architectural BIM Models related projects
• Ability to work well in teamwork and takes a proactive approach to work
• Able to complete models, shop drawings in timely and quality manner
• Strong verbal and written skills
• Candidate must possess at least a Primary/Secondary School/"O" Level, Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Architecture, Engineering (Civil) or equivalent.
• Full-Time position(s) available.

Senior/Design Engineer (C&S) (A1 main con, iconic building project)

Our client is a leading reputable A1 main contractor renowned for their impressive portfolio of iconic mixed development, residential and industrial building projects across Singapore. They’re embarking on an exciting new institutional building project in the CBD and are now looking for a Senior/C&S Design Engineer to join them during an exciting time in their development.

Job Responsibilities

• Provide technical expertise in the design and coordination of the civil and structural aspects of our construction projects.
• Work closely with project teams to ensure that all structural elements are designed to meet project specifications, regulations, and quality standards.
• Coordinate and liaise with relevant stakeholders to ensure the design complies with all requirement
• Prepare and present technical engineering reports, calculations, drawings, and specifications for project designs.
• Participate in the value engineering process to ensure cost-effective and efficient design solutions.

Requirements

• Degree in Civil/Structural Engineering, Construction Management, or related field
• Minimum 5 years of relevant building project/steel structures experience
• Possess knowledge of preparing construction sequencing drawings
• Experienced in resolving site issues too

Location: Central

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Visa is a world leader in payments and technology, with over 259 billion payments transactions flowing safely between consumers, merchants, financial institutions, and government entities in more than 200 countries and territories each year. Our mission is to connect the world through the most innovative, convenient, reliable, and secure payments network, enabling individuals, businesses, and economies to thrive while driven by a common purpose – to uplift everyone, everywhere by being the best way to pay and be paid.

Make an impact with a purpose-driven industry leader. Join us today and experience Life at Visa.

We are developing and executing a shared strategic vision for Loyalty & Marketing Services platforms and products that enable Visa to be the world-leading data-driven payments company. As a Data Engineer, you will be part of world-class team of Engineers to define, drive and execute on this vision. We are looking for a self-motivated individual with software engineering skills and expertise with Java, Web technologies & Big data. The candidate will be extensively involved in hands-on activities including POCs, design, development, testing, and documentation. Candidate must be flexible and willing to switch tasks based on team's needs.

Primary responsibilities will include:

• Design and develop mission-critical systems, delivering high-availability and performance
• Work on development of new products and enhancements to existing systems iteratively by building quick POCs and converting ideas into real products
• Work closely with architects, business and technical stakeholders to develop high quality products and services that meet business requirements and expectations while applying the latest available tools and technology
• Instill best practices for software development, and deliver high quality work on tight schedules
• Identify opportunities for further enhancements and refinements to standards and processes
• Coordinate Continuous Integration activities, testing automation frameworks, and other related items in addition to contributing core product code
• Present technical solutions, capabilities, considerations, and features in business terms. Effectively communicate status, issues, and risks in a precise and timely manner

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Basic Qualifications

• Bachelors degree, OR 3+ years of relevant work experience.

Preferred Qualifications

• 1 to 2 years of software development work experience along with a Bachelor’s degree, or 2+ years of work experience with an Advanced Degree in a technical field such as computer science, computer engineering, or a related field.
• Solid foundation in computer science with strong competencies in data structures, algorithms, and software design optimized for building highly distributed and parallelized systems.
• Proficiency in Java or Scala with strong design and coding skills.
• Hands-on experience with web technologies including Spring Boot, HTML, CSS, JavaScript, JSON, JQuery, and REST API.
• Practical knowledge of Angular.
• Working experience with Spring and Hibernate frameworks.
• Experience with Apache Spark is plus.
• Familiarity with Git/Stash, Ant, Maven, Jenkins, and Jira.
• Experience with database technologies like DB2, Oracle, SQL Server.
• Knowledge of Unix/Linux operating systems.
• Experience with Agile & DevOps methodologies.
• Excellent analytical and problem-solving skills with a strong automation mindset.
• Capability to handle multiple competing priorities in a fast-paced environment.
• Excellent written and verbal communication skills and the ability to effectively communicate logic and implementation plans to team members and managers.
• Self-starter, quick learner, and detailed and thorough.
• Experience in payment processing is a big plus.

Job Description

• Installation, commissioning, maintenance and testing of equipment.
• Compile field service reports after servicing of equipment.
• Provides product, service, or equipment technical and engineering information by answering questions and requests.
• Maintains product database, entering data.
• Maintains professional and technical knowledge.

Job Requirements

• Diploma in Electrical & Electronic Engineering or higher
• Strong interpersonal skill
• Good analyzing information and verbal communication skills
• Class 3 driving license

Additional Notes:

• Opportunities for overseas training and job.
• On the job training and Safety training will be provided.

Under administrative supervision of the Technology, this position is responsible for the deployment and maintenance of a cloud-based applications infrastructure.

Responsible for deploying, automating, maintaining, troubleshooting and improving the systems that keep the backend infrastructure running smoothly. The role requires you to have hands-on technical experience and a can-do approach towards environment automation / management and continuous improvement.

Job Duties:

• Deploying, automating, maintaining, and managing AWS cloud-based production system, to ensure the availability, performance, scalability and security of productions systems.
• Build, release, and configuration management of production systems.
• Pre-production Acceptance Testing to help assure the quality of our products / services.
• System troubleshooting and problem solving across platform and application domains.
• Suggesting architecture improvements, recommending process improvements.
• Ensuring critical system security using best in class cloud security solutions.
• Evaluate new technology options and vendor products.

Skills and Requirements:

• Bachelor’s degree in computer science or other equivalent technical discipline.
• 1+ years’ experience with using a broad range of AWS technologies (e.g., EC2, RDS, ELB, EBD, S3, VPC, Glacier, IAM, CloudWatch, KMS) to develop and maintain an Amazon AWS based cloud solution, with an emphasis on best practice cloud security
• AWS Certified Solution Architect (Associate) is preferred.
• Conversant with infrastructure definition tools such as Cloud Formation and Terraform
• Experience as a DevOps Engineer in a 24x7 uptime Amazon AWS environment, including automation experience with configuration management tools.
• Scripting Skills: Strong scripting and automation skills.
• Operating Systems: Windows and Linux system administration.
• Monitoring Tools: Experience with system monitoring tools.
• Problem Solving: Ability to analyze and resolve complex infrastructure resource and application deployment issues.
• Experience with other Clouds such as Azure or GCP can be considered.

Note: Proceeding to apply on this job post means you have read, understand and agreed to WPH DATA PROTECTION NOTICE FOR JOB APPLICANTS in the link below.

https://www.wphdigital.com/notices

Do you want to work for a leading marine contractor in technically challenging offshore projects from our Singapore Office?

At Heerema Marine Contractors, we do something new every day. We operate the world’s largest crane vessels and with them we transport, install and remove structures for the offshore energy markets. Our projects range from installing wind turbines, removing retired offshore oil and gas platforms to installing platforms amongst the largest in the world. You can find our headquarters in Leiden (the Netherlands), and there are offices in Houston, London, and Singapore while our vessels work globally. By joining us, you will play an important part in our unique maritime adventure.

As a (Jr.) Structural Engineer you provide designs and analysis for product development, study, tender and commercial T&I projects.

You will have the opportunity to go offshore on our vessels and see your designs and work in action, supporting our fleet with anything that requires a bright technical mind and pro-active attitude.

Daily activities

Your tasks and responsibilities include the following:

• Perform concept and detailed design of offshore lifting arrangements and steel structures, such as lifting appliances, lift points, lift arrangements and grillage and seafastening.
• Perform structural calculations and prepare technical design reports.
• Review structural deliverables (construction reports and drawings).
• Perform quality control on deliverables prepared by colleagues.
• Contribute to a continuously improving and learning organization by i.e. actively sharing knowledge and experience and identifying and providing follow up subjects for improvement.

Who will you work with?

The (Jr.) Structural Engineer is member of the Technology Department. You will work in a team with other engineers in various disciplines and actively liaise with colleagues in other departments and offices, like procurement, fabrication, and operations.

Is this the job for you?

You are a team player who organizes and plans the work and the involvement of others effectively and efficiently. You are quality and result oriented and have the ability to adapt easily when needed. Next to this you take the different interests of different divisions of the organization and mutual relations into account. You recognize the effects and results of your own decisions or activities on other parts of the organization.

Furthermore, you have:

• A Bachelor or Masters degree in Offshore Engineering, Civil Engineering, Mechanical Engineeringor Similar.
• Fluent in English (spoken and written)
• Affinity with structural engineering, project preparation and execution of offshore projects.
• Excellent analytical, practical and pragmatic skills.
• The ambition to work (temporarily) offshore on our vessels, overseas or in our other offices.

Working at Heerema Marine Contractors

Making the impossible possible offshore, this is what drives us at Heerema! To execute our offshore projects we must innovate, engineer and develop to find solutions for our clients’ challenges. Working with Heerema means working in an international, informal, and friendly environment where you will meet likeminded and passionate colleagues.

What we offer

• Excellent secondary labor conditions, such as health insurance, a bonus payment, overtime payment, business trip-, yard-, and offshore allowances.
• Starting at 18 working days and increasing to 25 days of annual leave.
• Ample opportunities for personal and professional development.
• Opportunities to develop your initiatives within a team.
• An informal working environment with international colleagues.
• A centrally located office with a good accessibility and parking.

· 5 days’ work week

· Central area near MRT

· Reputable and stable organization

Job Responsibilities:

· Provide pre-sales and post-sales technical support to customers and internal sales team, handling customer NDA and sample request

· Collect customers’ feedback and provide recommendation to customer for design requirements, product enhancements and capture new product opportunities

· Responsible for identifying and clarifying any technical issues related to new or existing products, and clearly communicate findings to the respective business unit

· Hands-on technical support to customers, documenting problems, and suggesting solutions

· Report design, reliability and functional problems to the appropriate groups within company & associate groups and work to solve problems

Requirements:

· Degree in Engineering (Electronics) or equivalent

· 5 years of technical customer support experience in semiconductor industry

· Field experience or hands-on practice or knowledge of multi-disciplinary system design and development

· Knowledge of Smart Card, RFID and microcontroller products; knowledge of physical access control and the security industry is desirable

· Experience with or knowledge of one or more of: CCD, CMOS image sensors, image capture, video standards, image processing

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Job description:

As a member of the filter design team, the successful candidate will play a key design role as a product owner of resonator/filter in development and commercialization of acoustic filters with both BAW and SAW technologies from beginning, concept meeting to end, mass production including characterization.

Experience with either SAW or BAW filter design -layout, simulation, fabrication, and characterization- is required for senior position and principal position is available for candidates with proven track record in ramping up commercialization of acoustics filters in mass production environment.

Responsibilities:

- Co-work with international team across China and Singapore on a cross-disciplinary team basis

- Use commercial circuit analysis and physical modelling tools as well as custom software packages to design and analyse acoustic filters

- Assist RF measurement analysis by generating test plans and analysing results

- Produce RF engineering reports to support team members

- Communicate with R&D team for co-design and device improvement

Qualifications/Desired skills:

- Track record in design and mass-production of SAW/BAW filters for mobile applications is highly desirable

- Strong skills and working knowledge of design simulation tools, e.g. ADS, AWR, HFSS, COMSOL, etc

- Understanding of RF test parameters and test equipment

- Understanding of filter application and mobile communication system and architecture

- Experience with drawing programs, schematic capture and PCB layout tools

- Experience in RFIC design, RF module and front-end system design is preferred

- Knowledge of MEMS fabrication

- Strong written and verbal English skills to support complex analysis

- Organized team player and a good learner who is open to discussions