• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Key Responsibilities

* Design and analyze cabin interior and mechanical components in support of aircraft interior modification projects.

* Develop drawings (e.g. LOPA, installation drawings, production drawings, etc), work instructions, procedures and recommendations.

* Develop engineering substantiation reports (e.g. Weight & Balance, Structural, Flammability reports) and Engineering Authorizations (EAs).

* Coordinate with FAA DERs and DARs, EASA CVEs and/or local civil aviation authorities for any necessary assistance and/or approvals.

* Support interior and mechanical aspects of proposal development, customer and supplier meetings including onsite modification technical support.

* Other duties as assigned.

* Temporary assignment travel of up to 3 months in the US and other countries in Asia is required.

REQUIREMENTS

- Bachelor Degree in Engineering (Aerospace or Mechanical Engineering); Experience in related commercial aircraft field either in cabin interior design or technical services would be an added advantage.

- Able to research and analyze Boeing or Airbus documents (e.g. SRM, IPC, AMM, etc.) as well as Original Equipment Manufacturer (OEM) documents (e.g. Service Bulletins, CMM, etc.).

- Able to create engineering installation and assembly drawings using CATIA V5 or INVENTOR and AutoCAD. The candidate should already understand standard engineering drawing convention such as ASME Y14.5.

- Knowledge of aircraft seating, interior components (e.g. carpets, curtains, galleys, partitions, floor and ceiling structures, etc) and décor materials.

- Knowledge of aircraft structures analysis using both Classical and FEA Methods and ability to use FEA software such as ANSYS/NASTRAN an added advantage.

- Knowledge of FAA CFR 14 Part 25 and equivalent EASA CS Regulations.

- Candidates with at least 3 to 5 years of relevant experience will be considered.

Note: Certain AAR job assignments or facilities may require proof of US Citizenship and the ability to qualify for, and maintain, applicable US Defense Security Service Clearances.

Please email your resume to [email protected] or send it to 7 Changi Business Park Vista, #03-01 SooKee HQ, Singapore 486042 and attention it to the Managing Director of AAR Engineering Services – Asia.

Job Description

• Prepare, manage, and facilitate design drawings utilizing BIM, Rino, Grasshopper and CAD technologies.
• Ensure all models are compatible and that BIM data is accessible to all project participants.
• Oversee coordination between architectural and structural interfaces, collaborating with main contractors and other trades for effective cross-team support.
• Work closely with the design team and other relevant departments to ensure all drawings meet design specifications.
• Manage design changes and revisions, addressing any discrepancies and queries between design and project teams.
• Attend site meetings as required and perform additional tasks as needed.

Requirements

• Degree in Architecture, Civil Structural Engineering, or a related field.
• Minimum of 4 to 5 years of relevant experience in construction and architectural projects.
• Proficiency in Revit, Navisworks, Rino, Grasshopper, AutoCAD, and MS Office.
• Knowledge of DGN, DWF, IFC, and MicroStation is a plus.
• Strong project management and decision-making skills.
• Ability to work effectively as part of a team as well as independently with minimal supervision.

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

Job Responsibilities:-

• Utilize in-depth knowledge of Foundation IP to evaluate and qualify IP’s. Able to benchmark and optimize Std cells/IO’s/memory for optimum performance, area or power needs of a project
• Conduct Spice simulations to verify the performance and reliability of designs on RC extracted netlists
• Perform library characterization to ensure accurate timing, power, and area models. Stay up-to-date with industry trends and emerging technologies in library characterization and PPA analysis
• Help to develop and maintain EDA automation scripts to streamline CAD flow and design processes
• Modify and optimize IPQA scripts to improve efficiency and performance
• Analyze and understand both hard and soft IPs within SOC designs. Work with IP vendors to deliver custom specs needed for MXL project needs
• Review silicon reports and provide detailed analysis to identify and resolve issues
• Work closely with vendors and cross-functional teams to ensure successful project outcomes. Collaborate with design teams to ensure seamless integration of libraries and IP blocks
• Maintain comprehensive documentation of IP Vendor engagement. Troubleshoot and resolve issues related to IP, EDA tools and automation flows

Job Requirements:-

• Bachelor’s or Master’s Degree in Electrical Engineering, Computer Engineering, or a related field
• Minimum 10 years of experience in design engineering or a related field. Good understanding of the IC design flow, including front-end and back-end processes
• Proficiency in Foundation IP, Spice Simulation, Library Characterization, EDA automation scripts, and IP script modifications. Familiarity with library characterization tools such as Liberate, Cadence Genus, or Synopsys Library Compiler
• Strong ability to review and analyze silicon reports and provide detailed insights. Excellent analytical and problem-solving skills
• Excellent interpersonal and communication skills for effective collaboration with vendors and team members
• Experience with advanced node technologies (e.g., 8nm, 4nm, and below)
• Experience with SOC IP design and verification
• Knowledge of emerging technologies such as FinFET, FD-SOI, or III-V semiconductors
• Familiarity with industry-standard EDA tools and methodologies
• Experience with tools such as Synopsys PrimeTime, Cadence Genus, or Mentor Graphics Questa

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is a global leader specializing in high-performance cooling systems, gaming peripherals, and PC components.

Role Summary:
We are seeking an experienced Senior Design Quality Engineer to drive quality improvements for thermal cooling solutions. In this role, you will oversee design and process quality, ensuring products meet the highest standards of excellence. This position offers the opportunity to lead cross-functional initiatives and optimize production processes within a dynamic, global environment.

The incumbent will be based in Hanoi, Vietnam as part of the company's expansion plans and setting up of a manufacturing facility in Vietnam.

Key Responsibilities:

• Quality Monitoring & Optimization: Develop and implement advanced systems to monitor and enhance product quality and yield. Lead initiatives to identify and rectify areas for improvement.
• Quality Issue Management: Address and resolve abnormal quality issues in manufacturing processes. Work collaboratively across teams to implement corrective and preventive measures.
• Process Enhancement: Strengthen internal quality controls and enhance process efficiency, driving operational excellence.
• Customer Quality Assurance: Lead investigations into customer-reported issues, ensuring effective corrective actions and preventive solutions are communicated to stakeholders.
• Inspection Process Improvement: Optimize inspection processes, integrating automation and advanced technologies where applicable.
• Cross-Functional Collaboration: Coordinate closely with design, production, and other teams to maintain rigorous quality standards.
• Team Leadership: Oversee the performance, development, and task allocation of the quality team, ensuring timely delivery of objectives.

Qualifications:

• Bachelor’s degree or higher in a relevant field.
• Demonstrated experience in quality engineering, particularly in manufacturing and design quality.
• Strong analytical and problem-solving abilities, with proven leadership skills.
• Knowledge of quality management systems and industry standards.
• Certifications such as Six Sigma are advantageous.
• Willing to be based in Vietnam and travel where required

This role is ideal for a dedicated professional passionate about quality control and process improvement in the electronics industry. If you're ready to take on a leadership position in a fast-paced, innovative environment, we encourage you to apply!

Please click on "apply" with your updated resume attached.

EV-Electric (EVe) Charging Pte Ltd is a subsidiary of the Land Transport Authority of Singapore (LTA), which coordinates the national effort to undertake the electrical infrastructure upgrades and deployment of electric vehicles charging points (EVCPs) primarily in Singapore’s residential carparks.

You will lead the project execution of the electrical infrastructure upgrade (including substations, consumer switch rooms) for power provision to EV chargers.

Overall, as a Design Manager, you will be responsible for the Charging Operations in the assigned zone(s). The job will include the following:

· Develop and implement end-to-end design development and deployment of EV chargers in public car parks. This also includes developing the tender specifications and requirements.

· Lead the design reviews to ensure EV charger deployment are carried out in compliance with the contract specifications and agencies’ code of practices and regulations.

· Support the deployment management process and coordinate with other public agencies to facilitate approval processes.

This role will also require collaboration with other government agencies, industry partners and community partners to manage the EVCPs’ installation within a designated geographical boundary. Project and people management skills will be tested to meet the master project implementation schedule, as well as to ensure smooth downstream operations and maintenance.

You are typically expected to ensure the contractor follows set regulations and is empowered to call out deviations. You shall also be the de facto deputy in the absence of the project manager for all matters.

Requirements:

· Tertiary qualification in engineering fields.

· Candidates with engineering experience in design and project management, as well as strong administration skills are preferred.

· Excellent interpersonal and communication skills to coordinate with team members and external stakeholders.

· Meticulous, efficient time manager, and skilful operator under tight deadlines

· Proficient in Microsoft Office suite software, and knowledge in Geographic Information System (GIS) platforms, applications, and interfaces preferred

· At least 5 years of relevant working experience, and at least 3 years of prior experience in managing diverse stakeholders.

Job Scope:

Creative and skilled Communications and Design Lead for a period of 7 months from Jan to Jul 2025. This role will be responsible for designing and managing our visual communications, social media presence, and event publicity, focusing on the Singapore Youth Festival (SYF).

Key Responsibilities:

Graphic Design

• Create visually appealing event collaterals using our SYF graphics and brand guidelines
• Design promotional materials for various SYF platforms (Arts Presentation, Art Exhibition, Celebrations), including print and digital media

1. Social Media Management
   • Manage and maintain the social media accounts (e.g. Facebook, Instagram and YouTube)
   • Create engaging content and implement social media strategies to increase audience engagement
   • Monitor social media trends and adapt our approach accordingly
2. Publicity and Communications
   • Develop and execute communication plans for the Singapore Youth Festival (SYF) and other events for our internal and external stakeholders
   • Write and edit content for various communication channels, including press releases, newsletters, and website updates
3. General Communications Support
   • Assist in the planning and execution of marketing campaigns
   • Collaborate with other teams to ensure cohesive messaging across all platforms

Requirements:

• Diploma in Communications, Graphic Design, Visual Arts, or a related field
• Proficient in Adobe Creative Suite (e.g. Photoshop, Premiere Pro) and Canva to create high-quality visual content
• Strong digital visual design skills and attention to detail
• Excellent written and verbal communication skills
• Experience in social media management and content creation
• Able to work well independently and in teams
• Ability to work in a fast-paced environment and manage multiple projects simultaneously
• Turn work around quickly to meet deadlines

COMPANY DESCRIPTION

Headquartered in Singapore, The EtonHouse International Education Group has 120 schools across 11 countries. We run pre-schools as well as K-12 international schools. Together, these schools provide internationally recognized programmes and high-quality education to over 20,000 students globally. The group also runs enrichment programmes and cutting-edge ed-tech programmes to scale the provision of high-quality education in pre-schools.

Over the last 27 years, EtonHouse has been at the forefront of international education in the Asia Pacific region and has won numerous awards. In 2019, our founder, Mrs. Ng Gim Choo won the EY Entrepreneur Of The Year Award in the Education category. In addition, EtonHouse was recently selected to be in the inaugural cohort of the Scale-Up SG programme, which is an Enterprise Singapore programme selecting high-growth potential local companies which can be groomed into future global champions.

With children at the heart of what we do and the vision to make good quality education accessible to every child in Singapore, EtonHouse launched the EtonHouse Community Fund (ECF) in 2015. As an independent IPC charity, ECF continuously runs initiatives to make a difference in the lives of vulnerable children.

EtonHouse Vision

Shaping the future through education

EtonHouse Mission

Developing confident and capable global citizens

Be a part of the EtonHouse family

We welcome passionate and dedicated professionals who share our belief in the power of education. Together, we can make a meaningful difference to children and society through education.

RESPONSIBILITIES

This is an exciting opportunity for an experienced Design & Technology teacher to join a growing, boutique school in the heart of Singapore. The successful applicant will be expected to teach Design & Technology from ages 9-16, Upper Primary to IGCSE. The school offers IGCSE Design & Technology so experience in this area would be an advantage. They will have outstanding subject knowledge and have the ability to enthuse and inspire students, maximising achievement and progress at all levels. A teacher with flexibility, resilience, and a caring and kind approach towards students. A learner with a drive to develop creative new approaches to student learning within a collaborative environment.

KEY RESPONSIBILITIES

• Deliver the Design & Technology curriculum to assigned classes in accordance with the school's timetable.
• Differentiate lessons according to the abilities and learning needs of individual students.
• Promote independent learning by adopting teaching and learning strategies which develop the competence and confidence of every student.
• Ensure the thorough implementation of subject specifications, teaching schemes, assessment policies and reporting procedures.
• Assess and develop the Design & Technology curriculum in the school
• Plan and deliver schemes of work, including the choice of appropriate teaching and learning methods to meet the needs of the subject, and of different students.
• Keep abreast of current developments in Design & Technology education and to adapt the curriculum content and methods of teaching and examining as appropriate.
• Identifying appropriate resources within the limits of the school budget.
• Ensure health and safety policies are followed within the Design & Technology workshop.
• Ensure that the Design & Technology workshop presents a stimulating environment, which help to influence students' attitudes positively towards the subject.
• Ensure students' work is regularly assessed and that homework is in line with school policy.
• Report to parents in accordance with the school's reporting policy.
• Use information gained from assessment, recording and reporting procedures to generate further improvement in student achievement.
• When required, take on a form tutor role in the Senior School and fulfill the responsibilities of that position.
• Follow the School's policies and procedures with regard to discipline and behaviour, daily routines, duties, homework, leave of absence and visits.
• Contribute to co-curricular activities that broaden students' experiences and contribute to the general life of the school.
• Promote the study of Design & Technology amongst students and parents.
• Attend and contribute to meetings of a professional nature.
• Maintain appropriate links with teaching colleagues in all sections of the school and foster cross-curricular links where appropriate.
• Liaise with members of the Inclusive Education Team with regard to individual students, to ensure that those needs are understood, planned for and met.
• Develop effective links with the wider community, in order to extend the study of Design & Technology and enhance teaching and learning.

• At least 2 5 years relevant professional teaching experience in education;
• The candidate should hold a minimum of a Bachelor Degree in Design and Techonlogy or Education or equivalent, which is obtained from a recognised University or College involving not less than 3 years full time study;
• Teachers Certificates, Diplomas or other Teacher Accreditation courses and certification are required if the applicant's degree is not in Education;
• IB PYP course and training are highly valued;
• Knowledge of or willingness to acquire knowledge of inquiry based learning is required;
• Applicants must provide original copies of their Certificates and academic transcripts for authentication;
• International experience, especially in Asia is highly regarded.

Job description and scopes:

1. Oversee and supervise C&S design, including authoring submissions and coordinating with consultants and architects and architects
2. Design Coordination with Consultant, Client , AC, Inter-Disciplines (MEICA & BS) and Sub Contractors
3. Design Package preparation for MEICA Equipment Plinth and Bolts design
4. Prepare & update Schedules for Architectural Authority Submission & ST Submissions
5. Prepare & update Schedules for Submissions of Deliverables list
6. Prepare RFI & RFC for CSA related items
7. Prepare the workflow of QPD / QPS Roles
8. Prepare the BCA Permit forms for site commencement
9. Review and comments of Architectural authority Submission drawings (such as URA, FSSD, PUB, LTA, NEA ,etc…)
10. Review and comments of BCA Submission of Civil, Structural and Geotechnical work (ST Submissions)
11. Review and comments of IFC drawings , which are extracted from 3D Model
12. Review and comments of Shop drawings, developed by Sub-contractors for Construction
13. Review and comments of Design Drawings and Calculations of Miscellaneous design
14. Review and comments of QA / QC documents
15. BIM 3D Model review and Comments and clash resolutions
16. Follow up on Prolog Submissions
17. Follow up with Inter-disciplines leads for Design Input information for C&S design
18. Change Register for design change control
19. Preparing RFQ Packages for CSA items ( Design Drawings & Specifications ) to Procurement
20. Monitor Site construction Progress & addressing site issues
21. Assist and attending BIM Model Walk-through, Hazop , Almop and Dfs, PSR and Risk management Work shops
22. Co-ordinate and Attending Monthly Progress Meeting & CSA progress meeting with Client & Consultant , and Main QP
23. Co-ordinate and attending SOCT Meeting with potential sub-contractors & suppliers
24. Prepare MOM of CSA Meeting, presentation slides for Monthly progress meeting & preparing Monthly progress report for CSA updates
25. Verifying Claims from design consultant
26. Prefer to assis on the Role of Lifting Engineer , review Lifting plans and approval of Lifting Permit

Requirements (Qualification & Experience):

• With relevant experience in managing similar complexity and scale
• Applicants with Lifting Engineer certification will be preferred

Working Hours: Monday-Friday, 9.00 am - 6.00 pm

Working Location: Novelty Techpoint, Singapore 536212 (Bartley)

Salary: $2500 - $3000 + Commission

Requirements

• Professional Certificate/Diploma/BS/BA or a related field of study
• 3-4 years of experience in account management, preferably in interior design / creative-led industry
• Must be able to read and edit autoCAD, SketchUp and other design softwares and site work is required.

Responsibilities

• Assist Project Director to manage the accounts of creative-led projects.
• Acting as the primary point of contact for clients, ensuring that their needs are met and their questions are answered in a timely manner
• Developing project plans and timelines, and ensuring that all project milestones are met on time and on budget
• Coordinating with other departments, such as design and production, to ensure that all project elements are delivered on time and to the client's satisfaction
• Preparing and presenting project status reports to the client and internal stakeholders
• Identifying opportunities for upselling and cross-selling to existing clients
• Ensuring that all project documentation is accurate and up-to-date
• Conducting research on the latest industry trends and best practices to ensure that our company remains competitive and innovative

Low Jia Yi R22104302

The Supreme HR Advisory Pte Ltd 14C7279

Acting role:

The Technical Controller appointed must possess a civil or structural engineering degree from a recognised institution and have the right qualifications and experience.

Resident Engineers must meet the acceptable qualifications set by BCA.

(Must be qualified by BCA)

Project Manager (Main jobscope)

• Familiar with all the documents submission to relevant government authorities
• Liaise with consultants and/ or sub-contractors engaged on the project
• Attend regular meeetings with client/ owner/ contractors/ sub-contractors and ensure the progress is on schedule
• Identify and comply with all applicable statuary/ regulatory requirements related to project
• Communication to external parties including client, subcontractors, consultants, vendors, etc on project needs, requirements and schedule by means of daily construction oversight
• Plan the work schedule and efficiently organize the site facilities in order to meet an agreed program of deadlines
• Monitor and manage day-to-day operations of projects, including developing and coordinating activities with other sub-contractors
• Able to read submission plan.

Job Requirement:

• Candidate must possess at least Bachelor's Degree in Engineering (Civil) recognised by PE Board or equivalent
• At least 8 years of working experience in the related field is required for this position

- Plan, coordinate and execute projects in interior fit out works (Commercial - Shopping Centre)

- Must have experience in handling F&B projects in the past.
- Good experience in project management and scheduling
- Ability to understand drawing

- Basic knowledge in M&E works will be an advantageous

- Certificate/ diploma in any of the following relevant field such as Architecture, interior design, project management

Qualifications & Requirements

· Min 3 years of experience in automation operations with product design skills

· Able to manage existing Automation systems and improvements for new systems

· Strong in computer aided design, or CAD.

· Expertise in 2D/3D modeling and rendering.

· Knowledge of materials, manufacturing processes, and design for manufacturing (DFM).

· Excellent attention to detail and ability to manage multiple projects simultaneously.

· Able to demonstrate innovative past product designs through a portfolio or simple case studies

· Comfortable in structural analysis, or FEA

· Strong problem-solving and analytical skills.

Responsibilities :

· Operate, monitor, and maintain automated systems and machinery to ensure efficient production processes.

· Perform troubleshooting, repairs, and adjustments to automation equipment to minimize downtime.

· Optimize automation workflows to improve production speed, accuracy, and consistency.

· Collaborate with engineering teams to implement system upgrades and new automation technologies.

· Conduct regular inspections and preventive maintenance of automated systems to ensure optimal performance.

· Work closely with production, engineering, and marketing teams to align automation and product design goals.

· Document processes, designs, and system configurations for future reference.

· Provide training and guidance to team members on automation tools and product design methodologies.

• Taking the conceptual design through to implementation and handover;
• Ensure that all design is in compliance with local authorities’ code.
• Ensuring sustainability targets are incorporated into the design;
• Production of tender documentation, including project specifications and contract schedules such as Summary of Tender and Schedule of Rates;
• Progressing the design in accordance with the Design Checklist;
• Chairing sub-contractor progress meetings;
• Chairing Architectural Department Client weekly Meetings;
• Liaising with Quality Assurance / Quality Compliance engineers to ensure alignment of supervision goals with specification requirements;
• In the absence of a Lead Architect, the Senior Architect shall assume the role and responsibilities assigned to the Lead Architect position;
• Mentoring of an Architect with the intent of securing properly trained personnel to ensure the continual expansion of the company;
• Ensuring Architectural System Supervisor is provided with the current approved plans and shop drawings;
• Ensuring Architectural System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation.

Other Duties

• To promote safe working practices and to protect the health and wellbeing of Employees, Sub-contractors and customers;
• To undertake the assigned work scope in a professional and responsible manner;
• To protect the interests of the company;
• The role could vary between pricing, design, construction, commissioning, through to final acceptance;
• Ad hoc duties as determined by management.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Job Summary:

We are seeking an experienced Design Verification Manager to lead our team in verifying complex System-on-Chip (SoC) designs. The ideal candidate will have expertise in IP verification, ARM architecture, and SoC design, as well as experience with UVM, AMBA, and SystemVerilog.

Key Responsibilities:

• Develop and execute comprehensive test plans for SoC IP blocks, including module-level and SoC-level verification
• Design and implement ASIC verification structures using UVM, including stimulus, checkers, assertions, monitors, and scoreboards
• Lead a team of design verification engineers to achieve project goals and deliver high-quality results
• Collaborate with other teams, including design, implementation, and validation, to ensure seamless integration and effective communication
• Develop and maintain documentation for test plans, verification methodologies, and IP blocks

Requirements:

• Bachelor's or Master's degree in Electrical Engineering, Computer Science, or related field
• At least 10 years of experience in design verification, with a focus on SoC IP verification and ARM architecture
• Proven expertise in UVM, AMBA, and SystemVerilog
• Strong knowledge of SoC design principles, including IP block integration and system-level verification
• Experience with test plan development, execution, and analysis
• Familiarity with EDA tools and development flows for ASIC verification
• Excellent communication, analytical, and documentation skills
• Experience with Ethernet L2/L3 switch/router, high-speed IO (USB-2/3/4, PCIe gen2/3/4/5, MIPI CSI-2/DSI-2 and SATA), Flash controller, or CPU peripherals

Technical Skills:

• UVM (Universal Verification Methodology)
• AMBA (Advanced Microcontroller Bus Architecture)
• SoC (System-on-Chip) design principles
• IP verification methodologies
• ARM architecture
• SystemVerilog programming language
• C programming language
• Python scripting language (nice to have)

Leadership Skills:

• Experience leading teams of design verification engineers
• Strong project management skills, including planning, execution, and delivery
• Excellent communication and interpersonal skills
• Able to manage multiple sites

Summary

Do you love taking on big challenges that require exceptionally creative solutions? Do you deeply understand how an incredible camera experience should work? The Camera Technologies group designs innovative technology that allows each generation of Apple products to produce photos even more incredible than the last. We design and develop groundbreaking ideas for everything involved in our camera systems, from sensor to lens. We collaborate with teams across Apple to research, design, develop, test, and qualify camera hardware for Apple products. Together, we’ll craft a magical photography experience that redefines what millions of customers can expect from their cameras. Bring passion and dedication to your job and there's no telling what you could accomplish. The Camera Hardware Engineering group is responsible for all research, design, development, test, and qualification of camera hardware for Apple products. We are searching for extraordinary Hardware Engineers to take ownership in the development and system integration of very high-performance, compact camera modules. The successful applicant will take leadership of camera hardware projects in engagements with product and technology teams.

Description

• Definition and trade-off studies of RGB camera optics, sensors, actuator, and packaging.
• Interaction with optical, electrical, process, controls systems, sensing, test, and mechanical teams on integration of camera hardware into products.
• Leadership of offshore manufacturing partners on camera design evaluation, product prototype builds, and qualification.
• Leadership of failure analysis and corrective action implementation at manufacturing sites as well as remotely, including assembly processes, testing, and calibration; parametric-data analysis of end-of-line yield and post-reliability failures.
• Evaluation and debugging of camera HW at module and product levels for Camera Design and Integration.
• Documentation of camera-specific design, test, and manufacturing requirements.
• International travel may be required to supplier facilities for product development and production bring-up.

Minimum Qualifications

• BSc/MSc/PhD in relevant field (Electrical Engineering, Mechanical Engineering, Optics, Physics, Materials or equivalent).
• Able to communicate and convey ideas clearly and concisely.

Preferred Qualifications

• Ability to lead a multi-functional team of engineers and scientists with unique background and technical expertise through the R&D phase of product development from concept to mass production is a key requirement.
• Ability to influence other teams, manage risk, make decisions with limited amount of information, deliver against a fast-paced development schedule are key requirements.
• Able to communicate and convey ideas clearly and concisely.

The applicant will also be familiar with at least 3 of the skills listed below:

• Design and tolerance analysis of highly constrained, high-volume actuators or translational mechanisms.
• Electronic circuit and system design including power and signal integrity.
• Understanding of geometric optics and image quality evaluation including test charts, algorithms, and lighting.
• Image/depth sensor design or characterization.
• Compact module manufacturing processes such as sensor attachment, flex attachment, active alignment, etc.
• Failure analysis techniques such as optical microscopy, X-ray, CT scans or SEM.
• Demonstrated ability in root-cause and corrective-action analysis.
• Proficiency in statistical analysis, data reporting, and visualization.
• Proven track record of successfully delivering new products into mass production on time, meeting yield and efficiency targets.

Summary

Do you love taking on big challenges that require exceptionally creative solutions? Do you deeply understand how an incredible camera experience should work? The Camera Technologies group designs innovative technology that allows each generation of Apple products to produce photos even more incredible than the last. We design and develop groundbreaking ideas for everything involved in our camera systems, from sensor to lens. We collaborate with teams across Apple to research, design, develop, test, and qualify camera hardware for Apple products. Together, we’ll craft a magical photography experience that redefines what millions of customers can expect from their cameras. Bring passion and dedication to your job and there's no telling what you could accomplish. The Camera Hardware Engineering group is responsible for all research, design, development, test, and qualification of camera hardware for Apple products. We are searching for extraordinary Hardware Engineers to take ownership in the development and system integration of very high-performance, compact camera modules. The successful applicant will take leadership of camera hardware projects in engagements with product and technology teams.

Description

• Definition and trade-off studies of RGB camera optics, sensors, actuator, and packaging.
• Interaction with optical, electrical, process, controls systems, sensing, test, and mechanical teams on integration of camera hardware into products.
• Leadership of offshore manufacturing partners on camera design evaluation, product prototype builds, and qualification.
• Leadership of failure analysis and corrective action implementation at manufacturing sites as well as remotely, including assembly processes, testing, and calibration; parametric-data analysis of end-of-line yield and post-reliability failures.
• Evaluation and debugging of camera HW at module and product levels for Camera Design and Integration.
• Documentation of camera-specific design, test, and manufacturing requirements.
• International travel may be required to supplier facilities for product development and production bring-up.

Minimum Qualifications

• BSc/MSc/PhD in relevant field (Electrical Engineering, Mechanical Engineering, Optics, Physics, Materials or equivalent).
• Able to communicate and convey ideas clearly and concisely.

Preferred Qualifications

• Ability to lead a multi-functional team of engineers and scientists with unique background and technical expertise through the R&D phase of product development from concept to mass production is a key requirement.
• Ability to influence other teams, manage risk, make decisions with limited amount of information, deliver against a fast-paced development schedule are key requirements.
• Able to communicate and convey ideas clearly and concisely.

The applicant will also be familiar with at least 3 of the skills listed below:

• Design and tolerance analysis of highly constrained, high-volume actuators or translational mechanisms.
• Electronic circuit and system design including power and signal integrity.
• Understanding of geometric optics and image quality evaluation including test charts, algorithms, and lighting.
• Image/depth sensor design or characterization.
• Compact module manufacturing processes such as sensor attachment, flex attachment, active alignment, etc.
• Failure analysis techniques such as optical microscopy, X-ray, CT scans or SEM.
• Demonstrated ability in root-cause and corrective-action analysis.
• Proficiency in statistical analysis, data reporting, and visualization.
• Proven track record of successfully delivering new products into mass production on time, meeting yield and efficiency targets.

Senior IT Business Analyst/Product Design
Duration: 12 Months (convertible to perm)
Location: Beach Road


YOUR RESPONSIBILITIES:

• Lead program/project requirements and design sprints to define business and technical requirements through design implementation.
• Manage the requirements delivery (planning, estimation, risk management, reporting) to succeed in meeting overall program/project delivery.
• Leverage business knowledge to advise features/requirements priorities to delivery leads and/or product owners.
• Gather requirements by facilitating/coordinating meetings and conversations between business users, product owners, designers, SMEs, tech leads, and other relevant stakeholders.
• Identify people and systems impacted by functional and non-functional requirements.
• Collaborate with AI-enabled tools and methodologies to ensure requirements are effectively integrated into AI-supported workflows.
• Create/gather acceptance criteria in user stories and prepare any requirements specifications.
• Validate AI-generated outputs, ensuring alignment with business objectives and compliance with pre-set rules.
• Proactively engage, manage, and build strong relationships with clients and stakeholders.
• Work closely with Developers, DevOps engineers, Designers, and QA teams during all phases of the development lifecycle.
• Participate actively in mob programming sessions to facilitate AI-supported collaboration and contextual alignment among team members.

Requirements:

• Degree in Information Technology or equivalent.
• Relevant domain: Financial Institution, Retail, E-Commerce, Environmental, Social, and Corporate Governance (ESG).
• With more than 5 years of working experience in IT business analysis, including experience in AI-driven workflows or collaborative AI-enabled team structures.
• Good understanding of enterprise applications or prior experience in various tech products/development stacks is ideal but not mandatory.
• Strong familiarity with AI tools such as ChatGPT, GitHub Copilot, Jira Automation, or other AI-enabled platforms is a plus.
• Participated in full software or product development cycles.
• Knowledge and experience of Agile development practices.
• Experience working within teams or other high-collaboration environments is highly desirable.

This is an exciting opportunity for an experienced Design & Technology teacher to join a growing, boutique school in the heart of Singapore. The successful applicant will be expected to teach Design & Technology from ages 9-16, Upper Primary to IGCSE. The school offers IGCSE Design & Technology so experience in this area would be an advantage. They will have outstanding subject knowledge and have the ability to enthuse and inspire students, maximising achievement and progress at all levels. A teacher with flexibility, resilience, and a caring and kind approach towards students. A learner with a drive to develop creative new approaches to student learning within a collaborative environment.

KEY RESPONSIBILITIES

• Deliver the Design & Technology curriculum to assigned classes in accordance with the school’s timetable.
• Differentiate lessons according to the abilities and learning needs of individual students.
• Promote independent learning by adopting teaching and learning strategies which develop the competence and confidence of every student.
• Ensure the thorough implementation of subject specifications, teaching schemes, assessment policies and reporting procedures.
• Assess and develop the Design & Technology curriculum in the school
• Plan and deliver schemes of work, including the choice of appropriate teaching and learning methods to meet the needs of the subject, and of different students.
• Keep abreast of current developments in Design & Technology education and to adapt the curriculum content and methods of teaching and examining as appropriate.
• Identifying appropriate resources within the limits of the school budget.
• Ensure health and safety policies are followed within the Design & Technology workshop.
• Ensure that the Design & Technology workshop presents a stimulating environment, which help to influence students’ attitudes positively towards the subject.
• Ensure students’ work is regularly assessed and that homework is in line with school policy.
• Report to parents in accordance with the school’s reporting policy.
• Use information gained from assessment, recording and reporting procedures to generate further improvement in student achievement.
• When required, take on a form tutor role in the Senior School and fulfill the responsibilities of that position.
• Follow the School’s policies and procedures with regard to discipline and behaviour, daily routines, duties, homework, leave of absence and visits.
• Contribute to co-curricular activities that broaden students’ experiences and contribute to the general life of the school.
• Promote the study of Design & Technology amongst students and parents.
• Attend and contribute to meetings of a professional nature.
• Maintain appropriate links with teaching colleagues in all sections of the school and foster cross-curricular links where appropriate.
• Liaise with members of the Inclusive Education Team with regard to individual students, to ensure that those needs are understood, planned for and met.
• Develop effective links with the wider community, in order to extend the study of Design & Technology and enhance teaching and learning.

QUALIFICATIONS

• At least 2 – 5 years relevant professional teaching experience in education;
• The candidate should hold a minimum of a Bachelor Degree in Design and Techonlogy or Education or equivalent, which is obtained from a recognised University or College involving not less than 3 years full time study;
• Teachers Certificates, Diplomas or other Teacher Accreditation courses and certification are required if the applicant’s degree is not in Education;
• IB PYP course and training are highly valued;
• Knowledge of or willingness to acquire knowledge of inquiry based learning is required;
• Applicants must provide original copies of their Certificates and academic transcripts for authentication;
• International experience, especially in Asia is highly regarded.

Archangel Digital Studios is a dynamic and innovative digital marketing agency based in Singapore. With a passion for excellence and a focus on creativity, we aim to redefine the standards in the industry.

As a Social Media Design Intern working with the marketing team, you will be required to create visuals and assets for advertising, emailers, social media, flyers, banners and more, as well as bring fresh and creative ideas to the table.

The place of work will be from home.

Responsibilities:

• Graphic design
• Create creative content for marketing collaterals such as flyers & emailers
• Design posts for social media & advertising
• Keep up to date with industry changes and the latest in social media design

Requirements:

• Diploma, degree or experience in design
• A keen eye for aesthetics
• Highly motivated and proactive
• Able to turn around designs quickly
• Able to work independently, methodically and meet deadlines
• Experience with Web Development platforms WIX, WordPress & Shopify advantageous but not required