- 2 years contract (renewable and convertible)

- Up to $5.5k + $120 site allowance

- Mon to Fri, 8:30am to 6pm (Standby/recall duties required)

- AMK

Responsibilities:

Involve in one or more teams working in normal hour in managing and coordinating multiple vendors in a large scale communications projects based on Key Performance Indicator (KPI):

• Conduct periodic inspections and audit in both software to hardware e.g. Backend IT security equipment, network switches, firewalls, servers etc to front-end devices, that ranges from Monitoring Management Systems, etc.
• Conduct reviews in Security Backend System including cybersecurity requirements.
• Ensure contractor’s contractual obligations are met and services are delivered well.
• Provide accurate and regular reports to the management on performance of the service delivery.
• Review design documents ensuring all design aspects of the systems are addressed.
• Project Management inclusive of reporting of Works progress and/or Issues escalation for resolution, project scheduling/project meeting, migration or Expansion work; as well as New sub-systems deployment.
• RF cell planning and validation including carrying out ad-hoc radio coverage survey and reports of the Radio sub-system performance.
• Support review of test plans, conduct, witness of system testing and acceptance testing.
• Support the implementation and configurations of security and network design.
• Liaise and coordinate with relevant stakeholders, maintenance/project team member and vendors to address critical incidents, coordinate with resolution parties, and establish effective communication between stakeholders for post-incident reviews.
• Analyse third-party as well as internal processes, and create strategies for service delivery optimization.

Period:

• 2 years contract (Renewable and convertible)

Location:

• AMK

Working Hours:

• Mon to Fri, 8:30am to 6pm (Standby/recall duties required)

Salary:

• Up to $5.5k + $120 site allowance

Requirements:

• Diploma / Degree in Electrical and Electronics Engineering, Computer Science or equivalent.
• Knowledge of project management, as well as knowledge of fixed/mobile communications platform technology. Certification in CITPM, PMP or equivalent certification as a requirement.
• Experiences in managing and coordinating multiple vendors ensuring KPI(s) are met.
• Knowledge in transmission and IP transport technologies, including DWDM, carrier ethernet, TCP/IP and Software Defined WAN. Certification in CCNA, CCNP or equivalent certification as a requirement.

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Reg No.: R2198469)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: 97C4832)

160 Robinson Road, #13-07/08/09 SBF Center, Singapore 068914

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Full training is provided, no experience is required

(Gov project, stable role) x 8

Basic Salary $2800 - $3800 + Site Allowance + Shift allowance + Performance Bonus + Shift Bonus + Other Benefits

Responsibilities:

• Monitor network and server systems
• Single point of contact with customers/users, resolver groups, third party service providers
• Managing incidents/service requests reported by users
• Tracking incidents/service requests and ensure closure within agreed timescales

Working Hours:

• 12-hours Rotating Day and Night shift work including weekends/PH
• Day shift: 9.00am – 9.00pm
• Night shift: 9.00pm – 9.00am
• Work 3 days off 2 days

Working Location:

• Near Cashew Mrt

Requirements:

• Min. Diploma in Information Technology

Singaporeans Only, security clearance required.

Benefit:

• 5 days Work
• Salary : $2000 - $2800
• Good Allowance, Bonus and AWS

Job Scope:

• Perform servicing, maintenance, and troubleshooting on equipment and system the at site
• Ensure the equipment is functionality
• Involve of Installation work for machine
• Partner with other technicians and engineer to perform daily operation
• Respond and attend to fault calls from client
• Ensure Timely check the equipment to ensure they are in workable condition
• Planning and undertaking scheduled maintenance

Requirement

• Possess at least NITEC and relevant field
• 2 years relevant experiences will be advantage
• Entry level welcome to apply, training will be provided

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

Benefits:

• Basic up $2500 - $3000
• North
• 5days work week

Job Scope:

• Assist in project coordination, equipment installation arrangement, testing and commissioning
• Assist manager in provide solution to the tasks requested by clients on problem of all Electrical
• Liaise with clients, vendors, contractors and sub-contractors
• Build positive relationship with customers and clients
• Work with internal department for process of project claim, Variable order(if any) etc
• In charge of project hand over to client or maintenance department

Job Requirement:

• Diploma in Electrical/Electronic or relevant engineering is advantage
• Entry level, no experienced required

Please submit your updated resume in MS word format by using the APPLY NOW BUTTON.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

[Job ID: 659506]

Responsibilities:

• Participate regular inspections and checks of concerned construction activities
• Supervision in bored piling works site
• Ensure the activities comply with the quality, environment, health & safety requirements
• Ensure proper documentation and record-keeping of construction activities
• Any other ad hoc duties assigned

Requirements:

• Minimum 3 years’ relevant work experience in LTA projects
• Registered Resident Engineer with IES and valid certification in Singapore
• Good interpersonal skills and hardworking
• Experience as a Supervisor for any construction-related work

-------------------------------------------------------------------------------------------------------

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

https://goodjobcreations.com.sg/en/privacy-policy/

-------------------------------------------------------------------------------------------------------

EA License no.: 07C5771
EA Personnel Reg. No.: R22107257
EA Personnel Name: Li Wai Chun

We are seeking a talented and experienced Senior Data Engineer (Quantexa)with expertise in Hadoop, Scala, Spark, Elastic, Open Shift Container Platform (OCP) and DevOps practices. Elasticsearch to join our team. As a Data Engineer, you will play a crucial role in designing, developing, and optimizing big data solutions using Apache Spark, Scala, and Elasticsearch. You will collaborate with cross-functional teams to build scalable and efficient data processing pipelines and search applications. Knowledge and experience in the Compliance / AML domain will be a plus. Working experience with Quantexa tool is a must.

Responsibilities:

·        Implement data transformation, aggregation, and enrichment processes to support various data analytics and machine learning initiatives

·        Collaborate with cross-functional teams to understand data requirements and translate them into effective data engineering solutions

·        Design, develop, and implement Spark Scala applications and data processing pipelines to process large volumes of structured and unstructured data

·        Integrate Elasticsearch with Spark to enable efficient indexing, querying, and retrieval of data

·        Optimize and tune Spark jobs for performance and scalability, ensuring efficient data processing and indexing in Elasticsearch

·        Implement data transformations, aggregations, and computations using Spark RDDs, DataFrames, and Datasets, and integrate them with Elasticsearch

·        Develop and maintain scalable and fault-tolerant Spark applications, adhering to industry best practices and coding standards

·        Troubleshoot and resolve issues related to data processing, performance, and data quality in the Spark-Elasticsearch integration

·        Monitor and analyze job performance metrics, identify bottlenecks, and propose optimizations in both Spark and Elasticsearch components

·        Ensure data quality and integrity throughout the data processing lifecycle

·        Design and deploy data engineering solutions on OpenShift Container Platform (OCP) using containerization and orchestration techniques

·        Optimize data engineering workflows for containerized deployment and efficient resource utilization

·        Collaborate with DevOps teams to streamline deployment processes, implement CI/CD pipelines, and ensure platform stability

·        Implement data governance practices, data lineage, and metadata management to ensure data accuracy, traceability, and compliance

·        Monitor and optimize data pipeline performance, troubleshoot issues, and implement necessary enhancements

·        Implement monitoring and logging mechanisms to ensure the health, availability, and performance of the data infrastructure

·        Document data engineering processes, workflows, and infrastructure configurations for knowledge sharing and reference

1. More than 5 years of experience as a Data Engineer
2. · Bachelor's or Master's degree in Computer Science, Software Engineering, or a related discipline
3. · Possession of Quantexa certification as a Data Engineer or Data Architect, with proficiency in the tool
4. · Demonstrated experience as a Data Engineer, utilizing Hadoop, Spark, and data processing technologies in large-scale environments
5. · Expertise in the Scala programming language and familiarity with functional programming principles
6. · Prior experience with the Quantexa tool is highly desirable
7. · Comprehensive understanding of Apache Spark architecture, including RDDs, DataFrames, and Spark SQL
8. · Advanced proficiency in designing and developing data infrastructure utilizing Hadoop, Spark, and associated tools (HDFS, Hive, Pig, etc.)
9. · Experience with containerization platforms such as OpenShift Container Platform (OCP) and container orchestration via Kubernetes
10. · Proficiency in programming languages commonly employed in data engineering, including Spark, Python, Scala, or Java
11. · Knowledge of DevOps methodologies, CI/CD pipelines, and infrastructure automation tools (e.g., Docker, Jenkins, Ansible, BitBucket)
12. · Experience with Graphana, Prometheus, and Splunk will be considered an added advantage
13. · Background in integrating and utilizing Elasticsearch for data indexing and search applications
14. · Solid understanding of Elasticsearch data modeling, indexing strategies, and query optimization techniques
15. · Experience with distributed computing, parallel processing, and handling large datasets
16. · Proficient in performance tuning and optimization methods for Spark applications and Elasticsearch queries
17. · Strong problem-solving and analytical capabilities with the capacity to debug and resolve intricate issues
18. · Familiarity with version control systems (e.g., Git) and collaborative development environments

• 5.5 / 6 days per week
• Location: Across Singapore
• Industry: Construction
• Basic $3000 - $5000
• Services: Building's Fire Protection / Electrical Services/M&E

Key Responsibilities:

• Plan, coordinate, and oversee the execution of fire protection system projects for buildings, ensuring timely and quality delivery.
• Monitor project progress, safety, and compliance, troubleshooting technical issues as they arise.
• Collaborate with clients, suppliers, and internal teams to communicate project requirements and objectives clearly.
• Conduct on-site inspections and system testing to ensure all installations meet regulatory and safety standards.
• Prepare detailed project reports and documentation to track progress and technical specifications.

Requirements:

• Bachelor’s degree in engineering, preferably in Mechanical, Electrical, or Fire Protection Engineering.
• Minimum of 2 years of experience in building projects or fire protection systems.
• Strong knowledge of fire safety codes and standards.
• Excellent project management and problem-solving skills.
• Ability to work independently and as part of a team with strong communication and coordination skills.

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

No experience/Diploma in mechanical/mechatronic/electrical/electronic or related engineering

MOE Grant can apply

SPM can apply

Basic (no experiene / fresh)-start from $2600-$3300

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Project Overview

We are seeking a Research Engineer to systematically organize knowledge for a project on “Designing human-AI teams.” The project is part of a five-year research program on "Mens, Manus and Machina—How AI Empowers People, Institutions and Cities in Singapore (M3S)."

Successful applicants for this position will have the opportunity to work on a cutting-edge, interdisciplinary project that aims to dramatically rethink how people and AI systems will work together in the future. To do this, the project seeks to build a strong scientific foundation for how AI can augment (as opposed to replace) humans.

An important goal of the project is to develop a rich ontology of activities that can be performed by human-AI teams. Like categorizing the plants and animals on a little-explored continent, the work will involve cataloging many (a) activities and (b) possible human-computer processes for performing these activities.

To do this, we will develop knowledge graphs that include (1) descriptions of many different types of activities and processes, and (2) classifications of these descriptions into multi-dimensional taxonomies that range from very general types of activities to very specific ones.

These knowledge graphs will then be used to automatically generate promising ways of combining humans and AI systems to perform different tasks. In the long run, we believe these tools will help rapidly (a) identify use cases for new AI capabilities, (b) specify effective processes and task allocations to humans and computers in a given situation, and (c) identify innovative ways to combine people and AI to solve business and societal problems.\

The T6 team is led by distinguished scholars, including Profs. Thomas Malone, Charles Fine, Armando Solar-Lezama, Jinhua Zhao, and Abdullah Almaatouq from MIT; Prof. Marcelo Ang from the National University of Singapore; and will be assisted by Prof. Archan Misra from Singapore Management University.

Responsibilities

• Developing descriptions of current or potential activities and processes based on various sources such as: interviews, field studies, literature reviews, and generative AI systems (such as ChatGPT).
• Making editorial decisions about what content from these sources to include in the knowledge graphs and how to present and organize this knowledge clearly.
• Collaborate with the project team and other researchers to design, implement, and evaluate research projects.
• Perform other duties as needed.

Requirements

- Bachelor’s or Master’s degree.

- Excellent communication and collaboration skills.

-Ability to systematically organize knowledge in structured ways that are logical, comprehensive, understandable, and conceptually elegant.

-Skilled in software development, good writing ability, statistical analysis, and social science methodologies such as experimental design or ethnographic observation.

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notified.

• MNC Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Lead daily operation as an HSE Production Engineer to ensure Safety in both daily operation and construction projects at site
• Lead HSE aspect of operation in risk assessment, Hazop study for new modification projects, changes to operating procedures, site construction activities
• Review and make list of high-risk activities in the process operation based on Hazop study, have regular meeting with production manager and make plan to improve safety level in such areas of operation
• Coordinate closely with day production & logistics members for HSE aspect of process operation and ensure safe work procedures are followed
• Study and review all the safety observation feedback and prioritize based on level of risk to follow up through MOC process. Ensure improvement items are followed by keeping records and timeline
• Work together with project engineers, production members and maintenance coordinator to ensure safety related projects are followed and implemented in a timely manner
• Review the emergency and disaster prevention procedures to ensure procedures stay relevant to current operation and up to date
• Lead and enhance any other HSE related improvement projects/activities
• To perform any other duties or assignments as assigned by superiors

Requirements:

• Diploma / Degree in Engineering, health, safety, or environmental field of study
• Working experience in the chemical industry
• Deep knowledge of Safety legislation and regulations in the chemical industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492

Lead Maintenance Engineer (HVAC & Purified Water Systems)

Our Engineers support internal and external manufacturing operations remain operational, continuously improve, and innovate. With our extensive range of facilities and environments, our Engineers have opportunities across many diverse areas including Biological, Chemical, Automation, Capital Projects, Maintenance, Safety, Process Development, Technical Services, Utilities and Validation.

Lead Maintenance Engineer (HVAC and purified water system)

In this role, you will:

• Act as Subject Matter Expert (SME) in IPT Maintenance team with in-depth knowledge in Purified water system, HVAC, and Electrical & Instrumentation.
• You will take ownership for the HVAC and purified water system day to day support and continues improvement.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Lead Quality Risk assessment and develop a yearly trend for purified water system and HVAC system.
• Develop and implement maintenance program, preventive maintenance procedures and spare parts strategy for safe, reliable, and efficient operation of the systems/Equipment’s.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using our Production System.

Key Responsibilities:

Safety & compliance

• Lead or support investigation, participate in trouble shooting and root cause analysis for various operational events, and ensure that all relevant engineering CAPA are completed within agreed timeline.
• Provide support and actively participate in the site expansion project related to the HVAC and water systems, ensuring compliance with the company’s requirements.
• Lead and manage change control on project activities or act as technical advisor for system modifications, capital projects and other identified plant improvement projects in line with defined specifications, budget, and qualification of facilities in accordance with site to approved procedures.
• Proactively review and challenge current activities to reduce safety risk for employees and quality risks for company’s products.
• Develop commissioning, qualification (IQ, OQ) activities are executed accordingly and in compliance.
• Maintain HVAC and Purified water systems are in optimum condition in compliance with Good Manufacturing Practice (GMP) & EHS requirements.
• Lead/participate in equipment failure troubleshooting and deviation investigations whenever required.
• Provide input during Basis of Design (BOD) and Detailed Design during large capital projects, applying good maintenance and reliability engineering principles whenever required.

Enhance and uphold maintenance quality.

• Implements technical solutions to improve equipment uptime and asset utilization through use of Continuous Improvement mindset (Lean methodologies)
• Supports Maintenance Lead to meet Profit Plan targets, optimize maintenance and product standard cost effectiveness in accordance with cGMP and Safety guidelines.
• Responsible for improving the reliability of equipment and maintenance processes by applying the principles of Reliability Centered Maintenance.
• Lead and perform Root Cause Analysis (RCA) for surfaced issues and implement a robust solution.

Operations excellence

• Plans, monitors, schedules, and implements measures on the Planned Preventive Maintenance Program and also ensures that the work is done in accordance with schedule and specification.
• Regularly review and revise maintenance program and procedures to increase equipment reliability, reduce waste and improve overall asset care process & cost efficiency.
• Work with Engineering & Safety, Health & Environment (SHE) to execute a 'reliability-centric’ maintenance plan.
• Share best practices and lessons learned with the objective of improving asset utilization.
• Undertake activities to support realization of production, maintenance and product cost effectiveness with emphasis on equipment reliability and maintenance expenses.
• Conducts Maintenance effectiveness / optimization reviews along with IPT maintenance leads/Engineers/Technicians.

Continuous Improvements (CI)

• Utilize Lean methodologies such as 5S, Standard Work, real-time problem solving (RTPS), to support execution of continuous improvement activities.
• Support the development of continuous improvement framework and work with the Maintenance team to identify opportunities.
• Compile and review data and develops action plans for critical HVAC systems and Purified water systems to improve reliability and reduce M&R cost.
• Identify water and HVAC system repair and replacement projects, plan and develop schedules, acquire materials, prepare budgets, and develop an RFC for job execution.
• Effective project management ensures that jobs are completed on time, within budget,

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Degree in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 5 to 8 years of maintenance work experience in Chemical, Semiconductor, aviation, oil & gas or Petrochemical industry.
• Analytical and Problems solving skill with regard to Purified water system and HVAC Systems
• Knowledge in HVAC and Purified water system operation and Maintenance principle.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Knowledge of various clean room standards across the Pharmaceutical Manufacturing Industry will be an added advantage.
• Familiar with Life cycle of the HVAC system (from design, operations, controls monitoring, maintenance and obsolescence management).
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Demonstrated use of Reliability analysis tools such as FME, RCFA, etc.

Professional Competencies

• Resilient and resourceful
• Good oral/written communication and interpersonal skills
• Continuous learning mindset
• Foster team collaboration
• Strong work ethics

The Opportunity

• Our Client, US established MNC company
• Monday to Friday: 7:45am - 4:45pm
• Location: Jurong Island, Singapore
• Basic Salary: $6500 - $10000 (Based on experience)
• Completion Bonus

The Talent

• Bachelor's Degree in Electrical, Electronics/Instrumentation and Control/Chemical
• At least 5 years related work experience in DCS in refinery, petrochemical or chemical industry
• Strong analytical/trouble-shooting skills
• Advance knowledge and work experience in Honeywell DCS System (TPS/EPKS DCS and Experion Batch)
• Excellent interpersonal and communication skills
• Good knowledge in SQL Programming/Power BI, Process Control Domain & Network administration
• Able to start in a short notice / immediately

The Job

• Provides engineering design, troubleshooting and maintenance of Distributed Control System
• Troubleshoots day-to-day process on process control applications, and controller tuning
• Assist Process Hazard Analysis and implements process
• Maintain documentation for DCS
• Conducts training programs for operators
• Lead and support development & execution of control system and greenfield projects
• Troubleshoot daily process problems related to process control applications
• Plant knowledge required
• Experience in batch process

Next Step
Interested candidates can email to [email protected]

• Updated resumes

Edmond Lee
Direct Line: 8206 8857
EA License No: 91C2918
Personnel Registration Number: R23114813

Senior Software Engineer

Working Location:Tai Seng
Working Days:5days (office hours)
Salary Range:$6,500 – $8,000

Job Scope:

Software Development

• Design, Develop and Maintain device drivers for Windows Operating Systems
• Undertake WHQL testing and certification of drivers and device frameworks.
• Design, Develop and Maintain User Libraries and DLLs.
• Participate in all phases of SDLC and prepare corresponding documentation
• Undertake porting and maintenance of existing drivers to new frameworks and OS’s
• Resolve defects reported by internal and external customers
• Collaborate with USB host & device firmware development teams.

Job Requirement:

• Degree/Master’s in computer science/Engineering or related field.
• 5 years or above experience in the area of device drivers development, preferably USB
• In-depth understanding of WDM and KMDF frameworks, multi-threading and DLLs
• Excellent C Programming Skills.
• Professional attitude to work and meticulous in coding and testing
• Must have participated and experienced in SQA processes.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above

Location: Fab10N

Closing Date: Until filled

As a NAND CMOS Device Engineer, you will help set the direction for current and future CMOS technology for Micron’s NAND Memory Technology Roadmap!

You will work with the Design Team to set electrical targets and define transistor structures to meet these targets. You will guide the device technology development and be in close relation with Process Integration, Design Engineering, Design, Design Rules, Reliability, Transistor Modeling, TCAD (Technology Computer-Aided Design), and Parametric Test, to name a few! In addition, you will ensure that the developed technology is manufacturable and highly yielding and that these considerations are designed into the technology from the start.

Together with your peers, you craft and implement our NAND-CMOS roadmap and make sure to align to product roadmaps

• You give directions on how to improve our device portfolio, both in performance and cost effectiveness
• You define, execute, and analyze silicon experiments for future device generations
• Interface with Design Engineers to define transistor targets, deliver transistor models, and optimize critical layout constrained Design Rules
• Work with TCAD simulation group to develop strategies for transistor structures to meet targets
• You strive to ensure that transistor models are correctly targeted to anticipate final silicon
• Define electrical test structures for transistors, isolation, design rule verification, and process monitoring
• Highly motivated to ensure transistors are developed meeting the required reliability standards
• You take initiative to collaborate with Manufacturing to ensure transistors are performing as expected and to debug yield/reliability issues
• You foster and enable a collaborative working style and team spirit by mentoring less experienced colleagues

Minimum Qualifications:

• MS/PhD in Electrical Engineering or related field, PhD in Semiconductor Device Technology preferred
• 5 plus years industry experience in the field of CMOS device design, simulation, characterization
• Experience in developing advanced logic transistor technologies
• Experience in developing Analog FETs operating at higher Voltages
• Preferred: Experience in the field of High Voltage applications, reliability, characterization, device development
• Understanding of analog design concepts
• Good presentation skills
• Excellent team and mentoring skills

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Our client is a well-established MNC, market leader in the IT industry. Due to their current expansion plan, they are looking for an Information Security Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Handle post-sales activities of related products and solutions.
• Engage in the implementation of large-scale projects.
• Offer on-site services, including deployment, testing and preparation of documentation.
• Provide technical assistance to maintain high levels of customer satisfaction.
• Troubleshoot customer inquiries by leveraging existing knowledgebase resources and resolving known issues.
• Be available for standby support to manage 24/7 maintenance calls.
• All other adhoc duties as assigned.

Requirements:

• Minimum diploma in IT / Cybersecurity or other related field of studies.
• Minimum 2 years’ IT support experience.
• Certified CCNA or CCSA is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Summary

You will be working with our client who specialises in the healthcare and technology space. Our client is seeking a skilled Test Engineer with hands-on experience in Microsoft Dynamics CRM 365. The ideal candidate will have a strong background in testing enterprise applications, particularly Dynamics CRM, and ensuring the quality and functionality of business-critical system. The role requires an individual with a thorough understanding of testing methodologies and best practices.

Responsibilities

• Analyse business requirements and translate them into detailed test cases for Microsoft Dynamics CRM 365 applications.
• Create, review, and maintain comprehensive test plans, test scenarios, and test cases based on functional and non-functional requirements
• Execute test cases manually, including functional, integration, and regression testing for Microsoft Dynamics CRM modules.
• Identify, document, and track defects/issues found during testing in defect management tools like Jira, Azure DevOps, etc.
• Work in close coordination with business analysts, developers, and stakeholders to understand the functionality of CRM modules and ensure proper testing coverage.

Requirements

• Bachelors degree in Computer Science or equivalent
• At least 4 years of experience in manual testing, with at least 2-3 years focused on Microsoft Dynamics CRM 365
• Strong knowledge of Dynamics CRM functionality, including sales, marketing, service, and custom modules.
• Familiarity with SQL and the ability to query databases to validate data within CRM systems.
• Understanding of software development life cycles (SDLC) and testing methodologies (Waterfall, Agile).
• Experience with end-to-end testing of complex business applications and integrations
• Able to conduct Test Readiness Review (TRR) to ensure readiness of the test phase.
• Experience in API testing using postman.
• Basic knowledge of automated testing tools and scripting is an advantage.
• Experience in testing integrations with other Microsoft technologies (e.g., Power Platform).
• Experience in UAT coordination and user training.

If you are interested in this role and would like to discuss the opportunity further please click apply now or email Chew Kai-Xinn at [email protected] for more information.Only shortlisted candidates will be responded to, therefore if you do not receive a reply within 14 days please accept this as notification that you have not been shortlisted.Morgan McKinley Talent SolutionsMorgan McKinley Pte Ltd EA Licence No: 11C5502EAP Registration No: R2196712EAP Name: Chew Kai-Xinn

Job Description:

• On behalf of the Owner’s Engineer (OE), the T&C Lead Engineer shall support the T&C Manager for overseeing all testing and commissioning activities of the IWMF Contractors, including the coordination of testing and commissioning activities of TWRP that interface with IWMF.
• The T&C Lead Engineer shall support the T&C Manager to lead the OE’s proposed testing and commissioning team and coordinate with its Resident Site Supervision (RSS) Team and OE’s design team as well as the Contractors to review the development of the Contractors testing and commissioning plan and the Contractors execution of their plan in order to achieve the Project milestones for each of the IWMF EPC Contracts (EPC Package 1 – Waste to Energy/Materials Recovery Facility and EPC Package 2 – Sludge Incineration Facility/Food Waste Treatment Facility).
• The T&C Lead Engineer shall support the T&C Manager to oversee the whole of each Contractors testing and commissioning activities, and the interfaces between EPC1 and EPC2 and TWRP as relevant, which should commence from dry/cold to hot commissioning to successful completion of entire commissioning process and trial run, including optimisation of plant operation with the Contractors and O&M teams.
• Participate as required by the T&C Manager in regular T&C Coordination Meetings with the Contractor and/or Other Contractors on adjacent sites (that is attended by Client representatives or similar others also)
• Any other matters that may from time to time be delegated by the T&C Manager.
• The OE’s T&C Lead Engineers are estimated to be mobilised to site at least 6 months prior to the commencement of actual testing and commissioning by the Contractor in order to familiarise themselves with the Works and the Contractors plans for the T&C and the expectations of the Client.

Job Requirements:

• The T&C Lead Engineers shall have at least 5 years of hands-on relevant experience in testing and commissioning (and operation) of large scale solid waste management projects (Waste to Energy - WTE, sludge incineration, materials recovery and food waste treatment), or experience with large scale industrial/process/utilities projects (i.e. waste, water, oil & gas, power) testing and commissioning.
• The T&C Lead Engineer to have a relevant engineering degree or certification.

Responsibilities

· Responsible for installation, commissioning, maintenance, and repair of current installed base of XRD & XRF for APAC.

· Troubleshoot, diagnose customer problems, and coordinates appropriate corrective action directly.

· Conform always to Malvern Panalytical and customer’s safety, cleanliness, and working protocol policies to maintain a safe and clean work environment.

· Ensure that guidelines and standards of work expected by Malvern Panalytical are understood and met.

· Carry out preventative maintenance activities to installed base as per factory guidelines.

· Provide Service Support and basic training after installation.

· General Service administration activities and report submission.

· Responsible for proper spare part handling per internal procedures.

Requirements

· Diploma Electrical Engineering & Mechanical Engineering, Physics, or related education. Knowledge of Chemical Engineering, Chemistry, Chemical, Electronics, Mechanics preferred.

· 2~3 of experience in maintaining analytical instruments or semiconductor equipment is preferred.

· Able to travel both domestically and internationally on short notice.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

Maintenance Engineer | Up to $4k | 5 Days | Tuas

Location: Tuas Avenue 6
Working Days: 5 days (Mon-Fri)
Working hours : 7:30am to 5:15pm
Salary Range: $3k - 4k

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Salary : SGD4,000 - SGD 5,000 + Commission
• Working hours: Monday - Friday 830am to 6pm
  (once a month half Saturday 9am to 12pm)
• Location: Woodlands

Job Responsibilities

• Develop close working relationship with customers championing products.
• Identify niche market segments locally, create market awareness, new product positioning and launch, develop and implement effective marketing programs with the timely support to penetrate, expand and accelerate business growth.
• Understand market trends, competitions, local market culture/customer expectations in order to achieve the organizations’ goals.
• Liaise with management and on various matters – develop jointly common marketing goals/strategies, share marketing information, obtain courses information

Job requirements

• With relevant experience, preferable with Semiconductor industry
• Cert /Nitec / Diploma in engineering background
• Possess own transportation is an added advantage

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683