Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

Job Description

• Prepare, manage, and facilitate design drawings utilizing BIM, Rino, Grasshopper and CAD technologies.
• Ensure all models are compatible and that BIM data is accessible to all project participants.
• Oversee coordination between architectural and structural interfaces, collaborating with main contractors and other trades for effective cross-team support.
• Work closely with the design team and other relevant departments to ensure all drawings meet design specifications.
• Manage design changes and revisions, addressing any discrepancies and queries between design and project teams.
• Attend site meetings as required and perform additional tasks as needed.

Requirements

• Degree in Architecture, Civil Structural Engineering, or a related field.
• Minimum of 4 to 5 years of relevant experience in construction and architectural projects.
• Proficiency in Revit, Navisworks, Rino, Grasshopper, AutoCAD, and MS Office.
• Knowledge of DGN, DWF, IFC, and MicroStation is a plus.
• Strong project management and decision-making skills.
• Ability to work effectively as part of a team as well as independently with minimal supervision.

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

Evaluates project information, confers and corresponds with client representatives in coordination with the

Project Manager/Principal to determine project parameters and requirements.

Develops design concepts for project(s).

- Leads design development of client’s interior program through development of photographic image studies.

- Develops interior design to meet the client’s programmatic requirements and assure technical suitability.

- Develops conceptual ideas graphically.

- Leads design charettes.

Participates directly in each project from programming through project completion.

Leads presentation and design drawings.

Be the creative head.

- Develops block plans and bubble diagrams.

- Leads and reviews design details.

- Corrects / revises drawings with minimal supervision.

Coordinates with design team to ensure integration of design and interior design elements.

- Provides guidance to other members of the design team to ensure that design documents are in appropriate formats.

- Participates in all charettes.

- Monitors and sometimes coordinates the design work of consultants.

Is responsible for quality control for the interior design function, including:

- Accuracy of each segment of work as it is completed.

- Conformance to company design standards.

Project Management

- Establishes program with Project Manager/Principal.

- Responsible for all projects within the team.

- Participates in determining the skills required of other team members for the project and the selection of those team members.

- Prepares progress reports. Alerts Project Manager to any changes in scope, lack of information or decisions from client.

Oversees interior design aspects of construction:

- Assists with construction oversight for general conformance with the interior design concept.

- Responds to construction questions as they relate to interior design issues.

Directs / supervises the gathering of the technical specifications for various interior design elements (FF&E).

- Selects and directs materials for project.

Confers and corresponds with client representatives, to determine project parameters / requirements; participates in design presentations.

Directs construction of finish boards.

Participates in the development of “in-house” design standards; assures that design policies, procedures, standards and philosophies are adhered to.

Responsible for personal and staff development

- Performs senior staff development duties such as mentoring, training, supervising and directing junior staff.

- Participates in management and leadership groups.

Title: Senior Staff Design Verification Engineer(SoC)

Location: Singapore

About the role:

Our client is a global Precision Semiconductor Manufacturing business. They are market leaders in the development of ultra-low-power semiconductor solutions globally.

The company aims to pushin the boundaries of energy efficiency and enabling a new generation of intelligent, always-on devices. Their focus on innovation and sustainability has earned them recognition in the industry and made them a trusted partner for many leading manufacturers.

Deepening its commitment to Singapore as a strategic hub to drive breakthroughs in product and technical innovation, they are looking to hire a Senior Staff Design Verification Engineer(SoC),

a Subject Matter Expert who is the critical point of contact in terms of ensuring a smooth flow of end to end verification plans for complex ultra-low power technology designs, supporting all phases of strategic development, from creating test plans and testbench to performing gate-level-simulations and participation in FPGA and Pre-silicon bring-ups in Singapore and beyond.

Responsibilities:
Reporting to SoC Engineering Director, and this position will be focusing on the below:

• Develop and execute comprehensive verification plans for complex SoC designs, ensuring functional correctness across all levels (block, sub-system, and full-chip).
• Possess a deep understanding of various architectures and confidently integrate third-party IPs and VIPs.
• Demonstrate expertise in both digital and mixed-signal verification methodologies, with a focus on low-power design and verification challenges.
• Utilize SystemVerilog (UVM) and other industry-standard verification languages to create robust test benches and verification environments.
• Collaborate effectively with design engineers and architects to define verification strategies, identify potential issues, and achieve optimal coverage.
• Continuously improve verification methodologies and stay up-to-date on the latest verification trends and tools.

Qualifications:

• Bachelor's degree in Microelectronics or Electrical Engineering or a related field (Master's degree a plus).
• Minimum 5-8 years of experience in the field of semiconductor design verification.
• Proven track record of successfully verifying complex digital and mixed-signal SoC designs.
• Strong understanding of low-power design principles and verification techniques.
• Proficiency in Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Makefile
• Technologies: ARM SoC (Preferred), AMB, AXI/AHB/APB, DMA, Flow Control, Serial Devices, QoS, MIPI(CSI/DSI), Crypto,OTP, DSP, Low-Power

Interested? Here’s what to do next:

Please apply to the role with a recent copy of your CV. We will be in touch once we review your profile for suitability.

Singapore Employment Agency License No.: 16S8069

Privacy Statement: By submitting an application and sharing your personal information with us, you consent to such information being collected, held, used and disclosed in accordance with our Privacy Policy (https://www.wilsonhcg.com/privacy-policy)

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Create comprehensive electrical circuit diagrams for automation and equipment systems.
• Assess, integrate, and validate hardware to ensure compliance with technical specifications.
• Produce CAD drawings depicting electrical circuits.
• Assist in diagnosing and resolving issues with system assembly, operation, and testing.
• Aid in equipment setup, problem-solving, and occasional installation.
• Provide assistance in testing new hardware and applications in-house.

Requirements

• Experience in automation machine design, proficiency in Electrical Design Software, electrical/electronic circuits and test instrumentation

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860

Only Shortlisted candidates will be notified

Quek Jian Wei

Reg No. R22110928

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.


Responsibilities

• Specify requirements and features for semiconductor equipment.
• Conceptualize and establish the architecture of innovative equipment.
• Engineer mechanical systems, incorporating the selection and utilization of motors, actuators, gear drives, pumps, and valves.
• Generate intricate engineering drawings.
• Conduct design verification and validation testing to guarantee adherence to specifications, safety regulations, and product requisites.
• Enhance the design of existing machines.
• Utilize analysis tools such as Fish Bone Diagram, FMEA, etc. to optimize processes.

Requirements

• 5 years of experience in semiconductor equipment design
• Expertise in designing automation and high precision machinery, including High-Speed Pick and Place mechanisms
• Proficient in 3D CAD software and equipment troubleshooting
• Capable of producing detailed mechanical drawings and applying knowledge of Geometric Dimensioning & Tolerancing

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Please WA Justine @ 9755 9161

Shortlisted candidates will be notified

Justine Lam Nyok Yuen

Reg No. R1218722

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Build blazing fast page speeds
• Build reusable components/primitives
• Delightful user interactions and affordances
• Work with the team to review PR, and make the codebase robust.

Job Requirements

• 5 years experience at tech startups with millions of DAUs
• Solid knowledge of TypeScript, and experience with Next.js, etc.
• Basic backend skills with Node.js, building REST APIs, working with databases
• Knowledge in Bitcoin and mining concepts
• Strong written and verbal communication skills

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Strong organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.


Responsibilities

• Specify requirements and features for semiconductor equipment.
• Conceptualize and establish the architecture of innovative equipment.
• Engineer mechanical systems, incorporating the selection and utilization of motors, actuators, gear drives, pumps, and valves.
• Generate intricate engineering drawings.
• Conduct design verification and validation testing to guarantee adherence to specifications, safety regulations, and product requisites.
• Enhance the design of existing machines.
• Utilize analysis tools such as Fish Bone Diagram, FMEA, etc. to optimize processes.

Requirements

• 5 years of experience in semiconductor equipment design
• Expertise in designing automation and high precision machinery, including High-Speed Pick and Place mechanisms
• Proficient in 3D CAD software and equipment troubleshooting
• Capable of producing detailed mechanical drawings and applying knowledge of Geometric Dimensioning & Tolerancing

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.


Responsibilities

• Specify requirements and features for semiconductor equipment.
• Conceptualize and establish the architecture of innovative equipment.
• Engineer mechanical systems, incorporating the selection and utilization of motors, actuators, gear drives, pumps, and valves.
• Generate intricate engineering drawings.
• Conduct design verification and validation testing to guarantee adherence to specifications, safety regulations, and product requisites.
• Enhance the design of existing machines.
• Utilize analysis tools such as Fish Bone Diagram, FMEA, etc. to optimize processes.

Requirements

• 5 years of experience in semiconductor equipment design
• Expertise in designing automation and high precision machinery, including High-Speed Pick and Place mechanisms
• Proficient in 3D CAD software and equipment troubleshooting
• Capable of producing detailed mechanical drawings and applying knowledge of Geometric Dimensioning & Tolerancing

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Senior Civil and Structural Design Engineer

Job Description

• To carry out Design of standalone temporary or permanent structures;
• To carry out building structures design including assisting in structural framing plan;
• To carry out Geotechnical design if with the experience or willing to learn geotechnical design;
• To supervise and lead supporting design Engineers to carry out detailed Civil & Structural or Geotechnical Designs.
• To supervise drafting Engineers to carry out drawings production.
• To plan and schedule the various scope of works including design, drawings production, authority submission and construction supports of the projects.
• To works as effective team member in project team, to interact with clients, co-ordinate with the consultants of other disciplines and the contractor.

Job Requirement

• Minimum 4 years’ working experience in Civil & Structural consultants.
• Highly self-motivated and promising career advancements.
• Experience in concrete and steel structures design, and temporary works design.
• Well-versed in local code of practice, authorities regulations for submission.
• Proficiency in engineering software such as STAAD-Pro, PLAXIS, Prokon, ETABs and SAFE etc.

Attraction Points:

- Outstanding career growth & development opportunity

- Competitive salary & work benefit package

- Passionate and friendly work culture

Good package and Good career opportunity will be given to successful candidates.

Qualified or interested candidates, please click to apply.

Role:

Project Sales Engineer (Mechanical / Engineering Design)

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

• Assists Lead Engineer in developing concept for new project work;
• To develop Civil & Structural framing plans, layouts from concept stage to basic engineering stage to further detailed engineering stage for smaller to larger projects;
• Assists Lead Civil and Structural Lead in developing Civil and structural details, drawings, calculations, specifications for larger projects;
• Works independently in the detailed design, specifications, and calculations;
• Develops Expertise in carrying out design works to comply to local code requirements;
• Ensures that the drawings developed for the project comply to project standards/ company standards;
• Assists Lead Engineer in dealing with shop drawings, vendor print review and comment, if necessary or as advised by the Lead Engineer;
• Assists Lead Engineer working on developing necessary documents as per project requirement and also assist Lead Engineer in analyzing output results;
• Assists Lead Engineer in meeting with client in kick off meeting or other weekly meeting as and when needed;
• Provides guidance to the Assistant Engineer, Engineer in carrying out the design works;
• Visits Client site as and when necessary and as advised by Lead Engineer;
• Assists in technical report writing, compiling and coordinating;
• Assists Project Managers in achieving project completion within budget and on schedule;
• Addresses site issues related to design;
• Supports construction on solving process design issues. Visit site to check and analyses issues;
• Assists Project Managers in achieving project completion within budget on schedule;

Requirements

• Bachelor Degree in Engineering (Civil)
• Design and Construction experience preferably in industrial buildings with Precast and Long span roof trusses experiences
• Experience with checking of shop drawings for Precast and steel structures and able to do detailed Design and work in a team and able to provide details for computer aided design team
• Familiar with the Local authorities requirements for civil and structural submissions

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Strong organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Perform design for manufacturability in all new projects.
• Provide PCB manufacturing technical advice to customers on their new projects.
• Perform feasibility studies and reviews for all new data received from customers.
• Adhoc duties as assigned.

Requirements:

• Degree/Diploma in Electrical & Electronics Engineering in Printed Wiring Board manufacturing environment
• Good communication, report writing and presentation skills
• Good analytical skill with ability to work independently
• Ability to communicate with all levels of staffs
• Entry level are welcome to apply as training will be provided.

Electronics MFG Industry

Loyang Area (Tpt pick up at designated area)

Interested applicants, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design.
• Min. 5 years of experience in CMOS Analog IC design and simulation.
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent).
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.