Job Description & Requirements

Responsiblities :

1. At least 2 years IT Service Desk experience or,

2. At least 1 year in IT Remote Support experience or,

3. At least 1 year IT Onsite/Desktop Support Experience

• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

Job Description & Requirements

1. At least 2 years IT Service Desk experience or,

2. At least 1 year in IT Remote Support experience or,

3. At least 1 year IT Onsite/Desktop Support Experience

• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

• Tuas Naval Base
• Up to $4000 + Bonus (salary based on experience)
• Direct Contract
• Training Provided

Responsibilities:

• Work on delicate Radar System for preventive and corrective maintenance on sites.
• Execute maintenance tasks within the committed TAT, Ops availability and good quality
• Liaise with customer for maintenance activities
• Perform maintenance activities and ensure tasks are performed accordingly to requirements
• Monitor and activate replenishment of consumables at reorder level
• Schedule and perform calibration of tools and equipment
• Provide inputs and prepare documentation required to complete job
• Manage inventory of authority furnished spares
• Perform housekeeping
• Response to customers’ requirements

Location: Tuas Naval Base

Working Hours: Mon – Fri, Normal Office Hours (Standby Required)

Salary Range: $3,000 - $4,000 + Bonus

Requirements:

• Min Nitec in Engineering in Electronics or equivalent
• Knowledge of EO/Radar maintenance experience would be advantageous
• Able to perform 24/7 stand by
• Physically fit and able to lift heavy loads
• Able to work at height and do not have height phobia
• Good team player and yet able to work independently.
• Valid Class 3 driving license would be advantageous.

If you are interested, please submit your application here.

Thank you for your application and we regret that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to P-Serv Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.p-serv.com.sg/priv.... You acknowledge that you have read, understood, and agree with the Privacy Policy.

P-Serv Pte Ltd

EA License No: 90C3494

Uma Maheswari | EA Personnel: R2092012

You may also reach me at 81278347 for further information.

• Perform first level troubleshooting on all reported incidents and escalate incidents to 2nd level resolver groups as per work instructions
• Provide First Call Resolution (FCR) technical support
• Troubleshoot and investigate cause of user’s problem
• Update work information with all troubleshooting steps used in the ticketing system
• Set Incident to “Resolved” if User’s problem has been solved
• Reassign ticket if agent is unable to resolve ticket

Quantity Surveyor

• Secure new contracts / projects, administer all project contracts
• Prepare tender and contract documents including bills of quantities;
• Undertake costs analysis for all project trade works;
• Establish client’s requirements and undertake feasibility studies with project team, perform value management and cost control;
• Execute procurement strategy and propose refinements / improvements;
• Identify, analyze and develop responses to commercial risks;
• Prepare and analyze costing for tenders;
• Analyze tender outcome and prepare detailed reports for review;
• Allocate work to subcontractors;
• Evaluate completed work and arrange payments;
• Monitor Gebiz, SESAMi, newspaper notices and other platforms for private and public tender and quotations;
• Maintain awareness of the current building contracts;
• Ensure compliance with relevant ISO and company standards or objectives;
• Keep abreast of relevant regulations such as Security of Payment Act (SOP), etc.

Project Engineer

• Coordinate with clients / main contractor, architect, consultants, suppliers and subcontractors;
• Conduct preliminary surveys of the construction site;
• Responsible for submission of technical drawings, work schedules and samples for clients / main contractor's approval;
• Undertake structural analysis, calculations and prepare design sketches and drawings indicating arrangement and design intent for a variety of building structures;
• Review and check shop drawings and built drawings;
• Attend site meetings with owners / subcontractors;
• Responsible for overall aspects of the management of subcontractors;
• Plan, work, schedule and delivery of equipment and materials to site;
• Responsible for monthly progress claims and project costing;
• Raise material requisition for local material ordering
• Ensure that all formalities such as permits and clearances are obtained from respective government agencies;
• Work closely with Consultants, Regulatory Authorities and Contractors, to provide planning, design and supervision to solve site matters and timely completion of the projects;
• Take part in the project plan and give inputs regarding implementation;
• Coordinate and manage Sub-contractors and Supervisors on site to ensure all works comply fully with regulatory and Client’s requirements;
• Update progress of construction work to Project / Site Manager
• Keep in touch with designers, architects, consultants and suppliers to ensure that construction is on schedule;
• Ensure implementation and sustaining of construction quality and safety programme;
• Prepare Method Statement, Risk Assessment and Safe Work Procedure;
• Process suppliers and sub-contractors (progress) claims;
• Ensure compliance with time and money constraints or budgets for projects; with relevant QMS, OHSAS, EMS and company standards and policies.

JOB REQUIREMENTS:

• Preferably Degree in Quantity Surveying or Engineering (Civil / Structural / Construction)
• Process relevant skills in MS Office, AutoCad, Microsoft Project
• At least 3 years working experience in the related field preferably min. 2 years experience in Building Construction specializing in Quantity Surveying or Engineering in Civil / Construction / Structural
• Good communication skills in both oral and written English and has the ability to liaise effectively with other professionals, e.g. clients / developers, main contractors, construction managers, quantity surveyors, subcontractors, architects, designers, other engineers, consultants, suppliers, etc.
• Possess excellent negotiation and coordination skills and able to work in fast paced environment

Kindly indicate the following information in your CV.

• Current / Last Drawn Salary (in SGD)
• Expected Salary (in SGD)
• Availability
• Residency Status in Singapore

We regret only shortlisted candidates will be notified.

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Deploy, administer, and support database and data lake infrastructures.
• Formulate and execute plans for high availability, backup, recovery, and disaster preparedness.
• Diagnose and resolve database issues and optimize performance.
• Enforce industry-standard security measures, policies, and best practices.
• Enhance clients' data warehouses and data lakes, and maintain comprehensive documentation.

Requirements

• Proficiency in Database Administration.
• Experience with Linux operating systems and scripting.
• Practical experience with at least one of the following: Hadoop Distributions, Relational Databases, or NoSQL Databases.
• Advantageous knowledge in one or more of the following areas: Data Virtualization tools, Scripting languages, Cloud platforms, and Docker/Kubernetes environments.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Deliver project milestones, install hardware/software, and troubleshoot issues during implementation.
• Draft and execute Statements of Work (SOW), coordinating issue resolution with external parties.
• Participate in System Acceptance Tests, collaborating with vendors and customers.
• Create and update technical documentation, emphasizing clear network topologies.
• Produce SOW, system handover documents, and maintain inventory records.

Requirements

• Proficient in Linux operating systems.
• Well-versed in Networking, Firewall, and Fiber-Optic transmission devices.
• Acquainted with Big Data technologies; preferred background in implementation and system maintenance.
• Advantageous experience in Virtualization.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Set and advance sustainability targets, balancing financial and environmental goals.
• Implement effective reporting systems; collaborate on performance benchmarks.
• Lead sustainability communications; create educational materials.
• Formalize sustainability practices through documentation and reviews.
• Monitor and report on sustainability metrics; conduct audits.

Requirements

• Experience in a related field preferred.
• Knowledged of BCA Green Mark for Data Centre and Buildings, ISO 14001 Environment Management System, SS564 Green Data Centre etc

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

• Good Bonus - AWS + Up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Manage the Supervisory control and data acquisition (SCADA) system and distribution management systems applications;

Involved in enhancement of the software functionality and troubleshooting to maintain system reliability and performance;

Maintain accurate records of maintenance activities, enhancements and fixes;

Collaborate and communicate with both internal and external customers to ensure smooth execution of projects and provide timely updates on project status;

Assist client for Annual Vulnerability Assessment and Penetration (VAPT) activity and follow up on the findings;

Follow up with product supplier and vendors, test and install the system patching when necessary;

Other ad-hoc duties as assigned.

Requirements:

Diploma/Degree in Electrical/Electronics/Computer/Software Engineering from a recognized Polytechnic/University;

Knowledge in programming languages such as C, C++ and Java;

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus up to 6 Month depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Location: Redhill

Basic + Commission + VB

JD:

• Research market trends, competitor offerings, and emerging client needs within sectors like commercial office/Retail design & renovation
• Proactively seek out and generate new business leads through networking, events, industry associations, cold call and referrals.
• Draw up networking proposals customized to individual sector
• Liaison between client, designer and other parties leading up to the securing of project, while ensuring client’s requirements are met and exceeded
• Prepare sales and marketing materials
• Work on project pricing, contracts, and fee negotiations that balance profitability with competitive positioning.
• Achieve and Deliver Sales Target
• Support in all aspect of Sales activities
• Manage and maintain clientele relationship
• Collate and evaluate client feedback and highlighting client feedback from customers for management analysis and follow-up

Requirement

• Diploma in Marketing, Business, Interior Design, or a related field.
• Min 3 years of experience in Business development, preferably in the interior design on commercial office/retail.
• Strong communication and interpersonal skills, with an ability to understand design concepts & to liaise with individuals at all level
• Committed, sales target driven and self-motivated
• Responsible and team player.
• Creative mindset with a passion for interior design.
• Excellent networking & communication and negotiation skills, with the ability to liaise with individuals at all level
• Committed, sales target driven and self-motivated

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in CVD equipment tools
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Associate System Engineer / System Engineer (2 years contract renewable)

5 days, 8.30am- 5.50pm

Salary: $2800- $3000 (AE), $3500 (System engineer) + Allowance

Location: East, and clients site whenever required

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Job scope:

• To provide support on maintenance project.
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is preferred.

Requirements:

• At least a Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Must have at least 1-2 years of Server experience
• Able to work on scheduled standby on rotating weeks