About Us

The Lindner Group is Europe’s leading manufacturer and contractor for the building envelope, interior fit-out and insulation. With a workforce over 8000, Lindner operates numerous production facilities and subsidiary companies in more than 20 countries from our main office in Arnstorf, Germany.

Lindner Facades Asia Pte Ltd (LFA) was successfully re-launched in May 2019, as part of the Lindner Steel & Glass operation. Located in Singapore, LFA will be used as a base to promote and secure projects for LFA and Lindner Group in the vast and promising Asian market.

Our projects will cover the Asian markets, which include India, Philippines, Indonesia, Malaysia, Myanmar, Thailand and Vietnam. Enquires have also been received from Cambodia, Bangladesh and Sri Lanka.

LFA offers pre-sales consultation and planning advice, design and engineering, project management and planning, fabrication and installation. Employing a team of highly skilled, well-trained and extensive experience when it comes to LFA’S unique selling point in delivering turnkey projects with complex steel and glass, facades, skylights, curtain wall and building envelopes.

Duties and Responsibility

· Create, develop & update BIM model either from scratch or existing supplied 2D CAD or PDF drawings.

· Ensure model quality and identify any conflict between disciplines.

· Generate & update Revit-based plans, sections, elevations and details that can be used as design analysis, tender drawing, drawing for Authority submission, shop drawing, fabrication drawing and as built drawing.

· Generate 3D centre-line model for structural Engineer to perform analysis.

· Maintenance & implementation of company’s BIM standards, Facade template, contents and library

· Any other ad hoc duties as assigned by Supervisor

Knowledge, Skill and Abilities

· Must have at least basic knowledge in Facade design. Experience in BIM submission to authority is must.

· Proficient in Revit. Knowledge in other BIM software is added advantage.

· Must have a good time management.

· Must be able to work with minimum supervision

· Must be knowledgeable, keen and observant in worksets and worksharing function of BIM.

· Must be a team player and with good working attitude

About the Company

Our Client is an established turnkey contractor that has accomplished numerous building and civil engineering projects globally.

Responsibilities

We’re looking for a Design Engineer to participate and support design matters for infrastructure projects.

• Planning and draft engineering designs, and perform cost estimation for projects including new tenders;
• Review and check design calculations, as well as assist in technical design and drafting and submissions to authorities;
• Ensure projects align with civil & structural engineering design criteria and relevant safety, quality and regulatory standards;
• Liaise among project stakeholders, including subcontractors, to ensure all civil, structural, and geotechnical works meet project requirements.

Requirements

• Bachelor’s degree in Civil Engineering or a relevant discipline;
• At least 3 to 5 years of experience in a similar role, preferably handling infrastructure projects;
• Ability to handle projects with strong focus on quality assurance and time management;
• Proficiency in industry-standard software;
• Good communication and interpersonal skills.
  

Employment Details

• Permanent role, with 5-day work week;
• Supportive environment for career development.

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Duties and Responsibilities (including but not limited to):

• The Facility Design Lead shall be able to provide technical advice on waste management facilities, waste treatment technologies, waste treatment capacity
• Ensure that consistent quality standards and conformance with design plans and specifications are maintained on all contracts and in all engineering disciplines from the start to the end of the Project
• Oversee the entire design process, from concept to implementation, ensuring project is delivered on time, within specifications and meeting industrial standards
• Lead and mentor a team of engineers and ensuring the quality in design work
• Manage design budgets, including cost estimation, resource allocation, and cost control
• Any other matters that may from time to time be delegated by the PD/PM

Requirements

The individual shall be:-

• a Professional Engineer/Chartered Engineer registered in his/her country of practice is preferred
• The Facility Design Leads shall have relevant engineering degree and professional certificates
• shall have at least 15 years of relevant engineering experience in the design and construction
• shall possess relevant experience in the planning and design of large scale waste management and water treatment facilities (e.g. WTE, sludge incineration, materials recovery and food waste treatment, electrical substation, etc.). The OE shall ensure that each of the key facilities within the project is led by a design lead with the relevant qualifications and area of specialisation

Job Overview:

We are looking for a motivated Market Research Intern to assist in gathering and analysing data related to the interior design industry.

This role offers an excellent opportunity to gain hands-on experience in market research.

Key Responsibilities:

• Conduct market research on industry trends and customer

preferences.

• Assist in creating surveys and questionnaires.

• Analyse data and prepare reports.

• Stay updated on interior design trends in Singapore.

Qualifications:

• Currently pursuing or recently graduated with a degree in Marketing,

Business, or Interior Design.

• Strong analytical skills and attention to detail.

• Excellent written and verbal communication skills.

• Proficient in Microsoft Office.

A world in crisis and needs a different kind of thinking. At Whiby Wood Mills, we fuse design, engineering, and a systems philosophy to push the boundaries of what is possible. We fully embrace the changing landscape of digital tools, R&D and dynamic workflows to unlock new high value sustainable results.

You will join as an Intern, and your key contributions will be:

• Helping to deliver transdisciplinary, holistic design for high-profile international projects.
• Supporting the team in delivering design solutions.
• Contributing to the preparation of design solutions, presentations, and reports.
• Assisting with 3D modelling for analytical or geometrical models (Etabs and Rhino).
• Assisting the team with design tasks on various projects.
• Contributing to benchmarking aspects of building design.

What we look for:

• Positive attitude and eagerness to learn.
• Commitment to the team and the work.
• Interest in computational design and programming.
• Undergrad in Engineering, Architecture, Architecture and Sustainable Design, Computer Science, etc

What we offer:

• A dynamic, fast-growing environment.
• Exposure to international projects.
• Collaborations with worldwide leading architects.
• An excellent environment for professional growth.

Job Description:

• To ensure that the Engineering designs are in compliance with project specific requirements, and in-line with the Engineering Standard Practice, Company’s ISO procedures, national and international engineering norms, codes, and safety requirements.
• Generate block diagrams, bill of materials, functional design specifications, design calculation, wiring drawings, and all other documents and drawings as required by project and necessary to ensure equipment can be procured, integrated, tested, installed and handed over to the customer on schedule.
• Ensure equipment supplied for a specific project is technically compliant with relevant specification requirements, project technical standards, correctly configured and completed.
• Ensures equipment specified and designed can be successfully integrated with other equipment with which it has to interface to.
• Produces test procedure documentation appropriate to project commissioning.
• Provides technical support to system assembly and integration team.
• Perform other ad-hoc duties as assigned by the Projects & Retrofit Manager / Assistant Manager

Requirements:

• Knowledge in AutoCAD
• MS Office
• Diploma / Bachelor / College Degree equivalent certifications in IT / Engineering with at least 2 years of experience in the field or in a related area

HOW TO APPLY:

Interested applicants, kindly click on “Apply Now” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Responsibilities

• Course delivery
• Teach according to the curriculum outline
• Monitor class progression according to objectives
• Monitor student academic performance against outcomes
• Undertake a fair and equitable assessment of students
• Submit students' academic progress reports to the Academic Director
• Maintain a positive learning environment appropriate to Inspiration’s ethos
• Maintain at least 90% of student attendance in each class
• Produce supplementary teaching resources, when required
• Contribute to the curriculum development and general administration needs of the program as required
• Willing to share with and guide students based on real-life experiences and knowledge
• Caring for students' well-being and learning progression

The Inspiration Way

• Learning activities all relate to authentic design project practices
• Teachers take on the role of Studio Manager
• Students take on the role of trainee designer in the studio

Requirements

• Commitment to Inspiration’s vision, mission, and strategic goals in the delivery of our programs
• Demonstrated content knowledge of the program and monitoring strategies, which enable students to achieve their full potential
• Ability to utilize a range of teaching and learning strategies to maintain student attendance and monitor student progress
• Demonstrated organizational skills and commitment to deliver the program, undertake student assessment, and submit progress reports on time and according to requirements
• Ability to teach students on project management with the relevance to Interior Design
• Knowledge of various design software (AutoCAD, SketchUp, Photoshop, Rendering software) will be an added advantage

We are looking for a Design Manager to lead a team of geotechnical design engineers in the world's largest geotechnical specialist contractor.

Responsibilities

• Lead the design works in accordance with site specific HSEQ Construction Methodologies, Risk Assessments, Site Rules and Keller Policies and Procedures.
• Understand and manage clients' requirements and their obligations in the development of a building design.
• Liaise positively & actively with clients, consultants & authorities using his/her technical expertise to adopt / accept / approve the technical proposal for the projects.
• Ensure the design process adheres to current legislation, standards and codes of practice.
• Ensure the design information is of the right quality and keeps pace with project timelines.
• Strive to eliminate health and safety risks in the design and financial risks during construction.
• Preparing detailed investigation report for any incidents related to technical issue.
• Review with the Business Development team on project closing reports and develop future improvement plans / strategies to reduce risk(s).
• Be involved in society work, including writing papers to seminars.
• Design D&B solutions, including solutions for ground improvement where relevant.
• Lead, develop and provide training to the team of Engineers.
• Provide technical marketing of solutions to clients and consultants.
• Conduct regular site visits to train and create buy-in from site personnel to promote quality and good practices.

This role may require travel to overseas offices to participate in global expertise groups and overseas projects occasionally.

Requirements

• Possess a PEB-recognised Master's degree in Civil Engineering or higher.
• Proficient in soil mechanics and finite element modelling software (i.e. PLAXIS 2D and 3D).
• At least 10 years experience in geotechnical engineering, preferably in ground improvement.
• Have experience leading a team of geotechnical design engineers.
• Have experience liaising with authorities, clients and contractors.

What We Offer

• Annual Leave, Medical Insurance, Medical Leave, Variable Bonus, Learning & Development Opportunities, Referral Rewards & Employee Assistance Programme
• Global & Regional networking opportunities
• Friendly team and enjoyable working environment

We encourage applications from the right candidates regardless of age, gender identity, sexual orientation, religion, belief or race. Learn more about Keller's Inclusion Commitment at https://www.keller.com/how-we-work/diversity-equity-and-inclusion

Find out more here:

https://www.kellerasean.com/

Cognita Schools are committed to safeguarding and promoting the welfare of children and young people and expects all staff, volunteers and other third parties to share this commitment. Safer recruitment practice and pre-employment background checks will be undertaken before any appointment is confirmed.

An exciting opportunity for a Secondary Design Technology Teacher has opened in AIS. If you are someone who is driven in making a positive difference and with passion for growth and development, this role is meant for you!

Position Requirements:

• IBDP/IGCSE and/or HSC experience preferred, but not essential
• Experience in an International School environment would be a distinct advantage
• Excellent communication skills, multi-tasking and time management
• Ability to work as a part of a team and an interest in participating in the wider school community

Qualifications:

• A minimum four year recognised teaching qualification including a Bachelor’s Degree and Postgraduate Teaching Diploma/University Qualification or a Bachelor of Education
• A minimum of 3 years Full Time teaching experience in a recognised educational institution ideal, however graduates may be considered

Further information about this position is available in the job description found in the AIS website at https://www.ais.com.sg/work-for-us-positions-vacant/

Applicants are required to read the job description for the role prior to applying and submit a cover letter, curriculum vitae and a duly completed copy of the School's Job Application Form (downloadable from the school's website) to the email address: [email protected] by 17 December 2024. Kindly ensure that the position title is clearly specified in the job application form.

Only applications submitted using the school's job application form will be considered.

THE ROLE:

The focus of this role is to plan, build, and execute the verification of new and existing features for AMD’s graphics processor IP, resulting in no bugs in the final design.

THE PERSON:

You have a passion for modern, complex processor architecture, digital design, and verification in general. You are a team player who has excellent communication skills and experience collaborating with other engineers located in different sites/timezones. You have strong analytical and problem-solving skills and are willing to learn and ready to take on problems.

KEY RESPONSIBILITIES:

• Collaborate with architects, hardware engineers, and firmware engineers to understand the new features to be verified
• Build test plan documentation, accounting for interactions with other features, the hardware, the firmware, and the software driver use cases
• Estimate the time required to write the new feature tests and any required changes to the test environment
• Build the directed and random verification tests
• Debug test failures to determine the root cause; work with RTL and firmware engineers to resolve design defects and correct any test issues
• Review functional and code coverage metrics – modify or add tests or constrain random tests to meet the coverage requirements

PREFERRED EXPERIENCE:

• Proficient in IP level ASIC verification
• Proficient in debugging firmware and RTL code using simulation tools
• Proficient in using UVM testbenches and working in Linux and Windows environments
• Experienced with Verilog, System Verilog, C, and C++
• Graphics pipeline knowledge
• Developing UVM based verification frameworks and testbenches, processes and flows
• Automating workflows in a distributed compute environment.
• Exposure to simulation profile, efficiency improvement, acceleration, HLS tools/process
• Strong background in the C++ language, preferably on Linux with exposure to Windows platform
• Good understanding and hands-on experience in the UVM concepts and SystemVerilog language
• Good working knowledge of SystemC and TLM with some related experience.
• Scripting language experience: Perl, Ruby, Makefile, shell preferred.
• Exposure to leadership or mentorship is an asset
• Desirable assets with prior exposure to video codec system or other multimedia solutions.

ACADEMIC CREDENTIALS:

• Bachelors or Masters degree in computer engineering/Electrical Engineering

LOCATION:
Singapore

#LI-LL1

Job Responsibilities:

· Design and implementation of mixed signal CMOS IP. Development cycle including circuit design, simulation, modeling, verification and bench characterization.

· Management products utilizing leading edge sub-micron CMOS technologies, e.g., 5/6nm

· Developing state of the art high speed mixed signal IP products that include op amps, comparators, bandgap, low-drop linear regulator, ADCs, DC-DC converters, and high bit-rate (Gbps) Serdes TX/RX.

Requirements:

· Bachelor or above degree in Microelectronic or Electronic and Information Engineering

· 5 years or above experience in the area of analog design

· Good knowledge in analog IC design in high speed Serdes, e.g., PLL, CDR, CTLE/DFE, TX driver etc.

• Solid understanding and experience in key analog layout considerations such as device matching, parasitic, noise coupling, floor planning, sensitive signal routing, current density and reliability considerations
• Familiar with SPICE simulation tool (e.g., Cadence spectre, Synopsys Custom Compiler, Calibre)

· Strong Communication skills, high level of independence, self-motivation and good team player

As an Electrical and Electronic Engineer, you will be responsible for designing, developing, testing, and maintaining electrical systems and electronic equipment. This includes working on components such as circuits, microprocessors, sensors, power generation and distribution systems, and control systems, applying your technical expertise to meet the needs of clients, manufacturers, or specific industries.

Key Responsibilities:

• Designing electrical circuits and systems.
• Creating schematics and layouts.
• Selecting appropriate components and materials.
• Conducting electrical tests and simulations.
• Ensuring designs comply with regulatory standards.
• Collaborating with other engineers to integrate electrical and electronics systems into products.
• Troubleshooting and resolving design issues.
• Preparing technical documentation and reports.
• Managing and maintaining design files and databases.
• Staying current with advancements in electrical and electronics engineering and technology.
• Performing any other tasks assigned.

Key Skills & Qualifications:

Education: Bachelor's degree in Electrical Engineering, Electronic Engineering, Mechatronics, or a related field. A Master's degree or higher is often preferred for senior roles.

Technical Skills:

• Proficiency with electrical engineering software (e.g., AutoCAD, MATLAB, LabVIEW, PSpice, etc.).
• Solid understanding of circuit design, PCB layout, and embedded systems.
• Experience with power electronics, automation, and control systems.
• Familiarity with microprocessors, sensors, IoT devices, and communication protocols (e.g., Bluetooth, Wi-Fi, SPI, I2C).
• Understanding of signal processing, analog and digital electronics.
• Problem-Solving & Analytical Skills:Strong troubleshooting and analytical skills to identify and resolve complex electrical and electronic issues.
• Soft Skills:Excellent communication skills for documentation and reporting, as well as client interaction.
• Ability to work collaboratively in team environments, especially in cross-disciplinary teams.
• Strong time management and organizational skills

Cognita Schools are committed to safeguarding and promoting the welfare of children and young people and expects all staff, volunteers and other third parties to share this commitment. Safer recruitment practice and pre-employment background checks will be undertaken before any appointment is confirmed.

An exciting opportunity for a Secondary Design Technology Teacher has opened in AIS. If you are someone who is driven in making a positive difference and with passion for growth and development, this role is meant for you!

Position Requirements:

• IBDP/IGCSE and/or HSC experience preferred, but not essential
• Experience in an International School environment would be a distinct advantage
• Excellent communication skills, multi-tasking and time management
• Ability to work as a part of a team and an interest in participating in the wider school community

Qualifications:

• A minimum four year recognised teaching qualification including a Bachelor’s Degree and Postgraduate Teaching Diploma/University Qualification or a Bachelor of Education
• A minimum of 3 years Full Time teaching experience in a recognised educational institution ideal, however graduates may be considered

Further information about this position is available in the job description found in the AIS website at https://www.ais.com.sg/work-for-us-positions-vacant/

Applicants are required to read the job description for the role prior to applying and submit a cover letter, curriculum vitae and a duly completed copy of the School's Job Application Form (downloadable from the school's website) to the email address: [email protected] by 17 December 2024. Kindly ensure that the position title is clearly specified in the job application form.

Only applications submitted using the school's job application form will be considered.

Join us to learn more about the behind the scenes of an interior designer

- Assist with research, sourcing, pricing and design item entry

- Liaising with vendors

- Measuring, sketch and design assist

- Data entry/ filing assist

- Assist with presentation preparation

- Obtain samples

- Library maintenance

- Assist in carrying of items for photoshoot production

- Assist in emails of inquires

- Assist with site visits

- Assist with client meetings

- Assist with designers

- Photo and video taking for social media purpose

- Content Creation

Email please send CV / Portfolio to [email protected]

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Ship electrical system design
• Electrical Load Schedule
• Electrical Single Line diagrams
• Short Circuit calculation
• Circuit breaker calculation
• Electrical equipment selection
• Electrical cable schedule, Cable tray layout, MCT design, cable route preparation, termination diagram
• Preparation of electrical material take off
• Possess good knowledge in automation integrations such as vessel ISCS, VRCS, AMS, etc.
• Prepare design drawings and documentation
• Project management, Project scheduling, client interaction, site visit (client office, ship, etc)

REQUIRED QUALIFICATIONS AND SKILLS

• Bachelor Degree in Electrical Engineering
• At least 3 years of working experience in the marine sector

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibilities:

· Lead the overall design process for the data centre, ensuring all architectural, structural, and MEP (Mechanical, Electrical, and Plumbing) elements are integrated into a cohesive design that meets the client’s requirements and project goals.

· Manage and guide the in-house design team, external consultants, and subcontractors, ensuring that designs are delivered on time, within budget, and to the required quality standards.

· Oversee the review and approval of all design deliverables, including drawings, specifications, and technical documents, ensuring compliance with local regulations, international standards, and project specifications.

· Act as the primary point of contact between the client and the design team, addressing client concerns, providing regular updates, and ensuring client satisfaction with design solutions.

· Identify design risks early in the process, working with relevant stakeholders to mitigate risks and resolve design-related issues in a timely manner.

· Drive innovation in the design process by recommending value engineering solutions, cost-effective design alternatives, and methods to optimize the functionality and efficiency of the data centre.

· Ensure the design complies with all relevant building codes, safety standards, and environmental regulations, as well as the requirements of regulatory bodies and local authorities.

· Develop and manage the design phase of the project schedule, ensuring that key milestones are achieved and that the project progresses on time.

· Work with the project team to establish and manage design-related costs, ensuring that the design process remains within budget and that resources are allocated effectively.

· Maintain accurate design documentation, ensuring that all changes, approvals, and communications are properly documented. Provide regular design progress reports to the Project Manager and stakeholders.

Requirements:

· Bachelor’s degree in Architecture, Civil Engineering, or a related field. A Master's degree or professional certifications (e.g., PMP, LEED, etc.) would be an advantage.

· Minimum 5-10 years of experience in design management within the construction industry, with a focus on large-scale, complex projects like data centres or commercial buildings.

· Strong understanding of design principles, architectural and engineering systems, and familiarity with data centre design requirements, including specialized systems like HVAC, electrical, and IT infrastructure.

· Proven leadership and team management capabilities, with the ability to coordinate and motivate cross-disciplinary teams. Excellent communication and interpersonal skills to liaise effectively with clients, stakeholders, and contractors.

· Strong ability to identify potential design issues early and implement effective solutions. Proficient in making decisions under pressure while maintaining project quality and client satisfaction.

Queenie Chua

R24125459

We are seeking a talented and motivated Graphic Design Intern to support our creative team. This role will focus on graphic design, video editing, and simple motion graphics creation for various platforms, including our online marketplaces, official social media accounts, retail stores and department stores.

Key Responsibilities:

Graphic Design

• Create visually appealing graphics for online product listings, marketing materials, and social media posts.
• Create visually compelling visual merchandising to increase foot traffic into department and retail stores
• Create graphic design for email campaigns
• Create graphic design for retail store displays, posters and other offline collaterals
• Opportunity to design for company’s new product packaging
• Collaborate with the marketing team to ensure brand consistency across all visual content.

Video Editing

• Edit video content for promotional campaigns, tutorials, and social media.
• Assist in shooting and producing video content as needed.

Motion Graphics

• Develop simple motion graphics for online advertising and social media engagement.
• Support the team in brainstorming and executing creative concepts for video and animated content.

Social Media Management

• Assist in brainstorming and creation of monthly social media content, including both graphic and video content.
• Assist in maintaining and updating content across official social media platforms.
• Help analyze social media performance and suggest improvements.

Marketing Support

• Design and optimize visuals for our online marketplace.
• Ensure all graphics meet platform specifications and best practices.

Qualifications:

• Currently pursuing or recently completed a degree in Graphic Design, Multimedia Arts, or a related field.
• Proficiency in design software (e.g., Adobe Creative Suite: Photoshop, Illustrator).
• Basic knowledge of motion graphics principles.
• A portfolio showcasing your design work, including graphics, video edits, and any motion graphics.

Responsibilities

• Formulate and implement strategic plans to identify, target, and secure corporate clients.
• Actively expand the client base through targeted acquisition efforts.
• Create customized networking proposals tailored to specific industry sectors.
• Serve as the liaison between clients, designers, and other stakeholders to ensure client requirements are met and exceeded.
• Prepare and manage sales and marketing materials.
• Assist in organizing and executing sales and marketing events.
• Achieve and deliver on set sales targets.
• Ensure all drawings and proposals are generated and delivered on time.
• Provide support in all aspects of sales activities.
• Manage and maintain strong relationships with customers.
• Collect and evaluate customer feedback, highlighting any complaints for management analysis.

Requirements

• Minimum of 3 years of working experience, preferably in sales within commercial office interior design or a related field.
• Strong business acumen and analytical skills with the ability to formulate effective sales and business development strategies.
• High sense of ownership and ability to manage multiple deals in the pipeline from start to finish.
• Excellent communication skills, with the ability to build rapport with customers and gather valuable market insights.
• Self-disciplined and able to meet ambitious customer visit targets, with timely submission of reports.

Interested candidates please apply online or send your latest CV to [email protected]

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

• Taking the conceptual design through to implementation and handover;
• Ensure that all design is in compliance with local authorities’ code.
• Ensuring sustainability targets are incorporated into the design;
• Production of tender documentation, including project specifications and contract schedules such as Summary of Tender and Schedule of Rates;
• Progressing the design in accordance with the Design Checklist;
• Chairing sub-contractor progress meetings;
• Chairing Architectural Department Client weekly Meetings;
• Liaising with Quality Assurance / Quality Compliance engineers to ensure alignment of supervision goals with specification requirements;
• In the absence of a Lead Architect, the Senior Architect shall assume the role and responsibilities assigned to the Lead Architect position;
• Mentoring of an Architect with the intent of securing properly trained personnel to ensure the continual expansion of the company;
• Ensuring Architectural System Supervisor is provided with the current approved plans and shop drawings;
• Ensuring Architectural System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation.

Other Duties

• To promote safe working practices and to protect the health and wellbeing of Employees, Sub-contractors and customers;
• To undertake the assigned work scope in a professional and responsible manner;
• To protect the interests of the company;
• The role could vary between pricing, design, construction, commissioning, through to final acceptance;
• Ad hoc duties as determined by management.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• With minimum 8 years of relevant experience.tronic Engineering / Computer Science or equivalent..
• With minimum 8 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms.
• Strong communication skills, problem solving and analytical skills.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!