Job Description & Requirements

• Liaise with Clients, Consultants, and Authorities for management of the project
• Must have the experience in Diaphragm wall and pilling
• Perform Civil/Structure engineering design works
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation, and close monitoring of projects
• Determine best materials and methods with Professional Engineers
• Liaise with Architects on design and safety of the structure
• Analysis of structural components with engineering software
• Prepare drawings, specifications, and computer models of the structure
• Ad-hoc duties as assigned by the Senior Engineer

Requirements:

• Candidate must possess at least Degree in Civil/Structural Engineering
• Minimum 10 years of LTA experience required
• Required Skill(s): Good communication and interpersonal skills, ability to liaise with all levels of people
• Relevant experience in the design of Buildings, Civil and Infrastructure works
• Preferably with project site co-ordination experience
• Knowledge of engineering software and MS Office

Job Description:
We are seeking an experienced AI Chip DFT (Design for Test) Engineer to join our team. This role involves the design and implementation of test architectures for AI chip designs, ensuring efficient and reliable testing processes. The ideal candidate will be responsible for integrating DFT circuits, performing simulations, developing test vectors, and supporting yield improvement and fault analysis.

Key Responsibilities:

• DFT Architecture Design: Lead the design of DFT architecture at the chip level, implementing testing circuits such as Scan, Mbit, Memory repair, and Bscan.
• DFT Circuit Design and Insertion: Implement DFT circuits and integrate them into the chip, ensuring proper timing constraints for DFT mode convergence.
• Functional Verification: Perform functional verification, pre-simulation, post-simulation, and power simulation of DFT circuits. Troubleshoot and resolve any issues encountered during testing.
• Test Vector Development: Develop high-coverage, low-cost test vectors and validate them through simulation and timing analysis.
• Yield Improvement and Fault Analysis: Contribute to yield improvement efforts and fault analysis. Assist with testing SDC (Synopsys Design Constraints) constraint files in testing modes and help with timing and power convergence in the backend.

Qualifications:

• Educational Background: Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s or Ph.D.) are a plus.
• Professional Experience: Minimum of 4-5 years of experience in DFT, with expertise in chip-level DFT architecture design, circuit insertion, and testing.
• Technical Skills:
  • Proficiency in DFT methodologies, including Scan, Mbit, Memory repair, and Bscan.
  • Strong experience with functional verification and simulations (pre/post, power simulation).
  • Ability to develop efficient test vectors and perform timing and simulation analysis.
  • Familiarity with yield improvement and fault analysis processes.
• Tools & Scripting: Experience with DFT tools and scripting languages (e.g., TCL, Perl, Python).

Soft Skills: Strong problem-solving skills, attention to detail, and the ability to collaborate effectively with cross-functional teams.

Collaborate with cross-functional teams to develop and support business applications, adhering to company and industry best practices.

Actively participates in analysis, design, coding and testing phase.

Perform maintenance and troubleshooting of issue in existing solutions.

Participates in R&D effort on new and exciting technologies.

Requirements:

Diploma or Degree in Computer Science

Minimum 1 year of hands-on experience in Web Applications development.

Skilled in C#, ASP.Net, .Net Core, MS SQL, Angular, Jquery, Flutter.

Experience in mobile app development (Flutter) is an added advantage.

Attention to details, committed and responsible with strong working ethic, able to work on tight deadlines.

Self-motivated individual with the ability to learn and develop independently in a fast paced environment.

Strong analytical and problem-solving skills and good team player with good communication skills.

The candidate need to work in construction site and need to have construction site work experience. candidate must work shift work and long hours till complete the concrete work task. co -ordination with clients and supervisor and company executives. need to know how to estimate quantity for the concrete volume and steel and form work materials requirements.

Responsibilities

• Assist in project planning and scheduling.
• Review engineering designs, drawings, and specifications to ensure compliance with project requirements and industry standards
• Assist Construction Manager & Quantity Surveyor in Project Progress Claiming Work
• Coordinate with project stakeholders, contractors, and suppliers.
• Track project progress, identify risks, and implement mitigation strategies.
• Provide technical support and resolve engineering issues.

Requirements

• Diploma/Degree Civil Engineering or equivalent
• Minimum 3 years of working experience in LTA Project
• Responsible, mature, hands-on, meticulous and committed team player

Other:

• Working Day: 6 days per week

Job Description

• Responsible for Equipment Uptime, Productivity and CIP.
• Work in a cleanroom environment for long hours.
• In-charge of PM planning, Equipment Maintenance, and Parts Management.
• Co-work with Engineer to resolve equipment/line issues.
• To improve and enhance machine performance and upgrade machine capability.
• Perform any other duties as assigned.

Requirements

• Diploma/Higher Nitec/Nitec in Engineering (Electrical / Electronic / Mechanical), or equivalent.
• Proficiency in Microsoft Office.
• Ability to work independently as well as in a team.
• At least 2 years of relevant working experience in manufacturing environment.
• Fresh graduates are also encouraged to apply.

School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research.

With over 3,000 undergraduates students and 1,000 graduate students it is one of the largest EEE schools in the world and ranks 10th in the field of Electrical & Electronic Engineering in the 2024 QS World University Rankings by Subjects.

Today, the School has become one of the world’s largest engineering schools that nurtures competent engineers and researchers. Each year, the School graduates over a thousand students who are ready to take on great ambitions and challenges.

For more details, please view: https://www.ntu.edu.sg/eee

We are seeking a motivated and skilled Project Officer to contribute to the design and simulation of high-efficiency DC-DC converters and RF power amplifiers.

This role involves working on innovative solutions in the field of analog/RF/power management IC.

Key Responsibilities:

• Development of teaching materials for IC design
• Design, implementation and testing of DC DC converters and other related analog/mixed signal ICs. Development cycle including circuit design, simulation, modeling, layout, verification and measurements.
• Design state of the art DC DC converters that include op amps, comparators, bandgap, low-drop linear regulator, ADCs, switching power stage, etc
• Design of high power-efficiency RF power amplifiers
• Prepare research papers/reports/technology disclosures, etc

Job Requirements:

• Bachelor’s degree in IC design or related field.
• At least 2 years of relevant experiences in IC design/Electronics.
• Familiarity with Analog/Power Management/RF IC design and Cadence software.
• Good written and oral communication skills.
• Proficiency in Cadence, Python or Matlab.
• Ability to work independently and deliver solutions within strict timelines.
• Attention to detail, with excellent organizational and time management skills.
• Entry level candidates are welcome to apply.

We regret to inform that only shortlisted candidates will be notified.

Location: Tuas West (Pick Up from Jurong East MRT & Choa Chu Kang MRT at 7am)

Working hours: 8:00am to 5:15pm (Mon to Fri)

Salary: Up to $4200 (AWS and VB)

• Devising and implementing methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment
• Designing and analysing inspection and testing processes, mechanisms, and equipment
• Conducting quality assurance tests and performing statistical analysis to assess the level of control and manage product quality risks
• Undertaking root cause analysis of incidents requiring corrective action
• Ensure that corrective measures and deviation meet acceptable reliability standards
• Other ad hoc duties assigned

Requirement

API Q1 and Q2 certifications

Internal audit certification

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

Benefits:

• Basic Salary up to $2,500 with yearly increment based on performance.
• 5 Days Work Week (8.30 am to 5.30 pm)
• Annual leave up to 10 days for first year
• Entry level are welcome and on job training provided

Job Description:

This is a contract role for an Assistant Engineer located in Ang Mo Kio. Our client is a Japanese multinational engineering, electrical equipment and electronics corporation headquartered in Tokyo, Japan. You will involves extracting logs from electronics products and preparing them for hardware investigation using tools like jigs and laptops, all according to standard procedures. You’ll also help with the investigation process and enter data into both internal and authorities' systems. Regular system checks are needed to keep track of progress, and you may need to pack products for overseas investigations. Additionally, you’ll collect faulty goods from approved workshops and care centers, while keeping an updated inventory of these items.

Qualifications:

• ITE in Electrical/Electronic Engineering or years of equivalent technical knowledge
• Basic knowledge operation system like Windows, Linux

Responsibilities:

• Visit new customer and look for a new business opportunity
• Continue to strengthen the relationship with existing accounts
• To handle MRO and allocated Projects
• Market company capabilities as a valve automation and service center
• To do site troubleshooting work when required

Requirements:

• Min Nitec / Diploma
• Trained in instrumentation & controls or in a mechanical field is an advantage
• Experience in Marine Offshore, MRO, Projects for Oil & Gas / Petrochemical / Pharmaceutical / Power plant is an advantage
• Good interpersonal and customer service skills
• Mature individual with initiative and a good team player
• Possessing own vehicle with Class 3 driving license is an advantage

AWS and VB

Incentive company trip annually

Mobile & company line provided

Kindly email your Resume in *MS Words Format to* Mr Lex Ong Shee Hean (R1106602): [email protected]

(NOTE: The following information should be Included in the Resume. Thank you)

1. Date of Availability
2. Detailed Job Scope
3. Reason for Leaving for All Employments
4. Salary Expectation

Shortlisted candidates will be notified for an interview.

Visit our website for more positions: http://strategysolutions.com.sg

MOM License: 09C3018

We are seeking an experienced Executive Engineer, Underground Structures to join our team in Singapore, Singapore. In this pivotal role, you will lead the design and execution of complex underground infrastructure projects, ensuring the highest standards of safety, efficiency, and innovation.

• Oversee the planning, design, and construction of underground structures, including tunnels, underground stations, and deep foundations
• Develop and implement engineering solutions for complex geotechnical and structural challenges
• Manage project teams and collaborate with cross-functional departments to ensure timely project delivery
• Conduct detailed structural analysis and design for underground facilities
• Ensure compliance with local and international safety regulations and construction standards
• Evaluate and implement innovative construction methods and technologies to improve project efficiency
• Provide technical leadership and mentorship to junior engineers
• Prepare and review technical reports, design calculations, and construction drawings
• Liaise with clients, contractors, and regulatory authorities to address project-related issues
• Participate in business development activities and contribute to proposal preparation

Job Highlights

• Opportunities to work on award-winning projects
• Performance bonus for high-performer
• Good medical benefits

Job Description

Your Role

• Prepare and compile costing for building and interior works
• Attend all design consultations and site meetings
• Prepare high standards of 3D and AutoCAD Drawings, Material Boards
• Prepare schedule of finishes and project management schedules
• Brief and explain to contractors the proposed design intents and finishes
• Ensure quality and a high level of customer satisfaction

Job Requirements

• Experience in designing residential and hospitality projects
• Must possess skills in the following Computer-Aided Software Skills: Autodesk AutoCAD & Adobe Photoshop
• It is good to have the following skillset in Autodesk 3D Max, SketchUp, Vray
• Highly motivated, confident, and eloquent with good interpersonal skills
• Good communication skills
• Computer proficiency in Microsoft Office – Excel, Word, PowerPoint, etc

Perks/Benefits

• Opportunities to work on award-winning projects
• Performance bonus for high-performer
• Good medical benefits
• Friendly Working Environment
• Good Career Growth

Interested candidates, please send your resume and portfolio to [email protected].

whatsapp: 85986715

Position: Furniture Design Partner

Pass: singaporean, PR or LTVP

Salary: $1000-$10000

None during working hours

Requirements: Relevant experience in furniture design

Location: 211 Henderson Rd

Jie Shun Jia | EA License No.: 24C2410 | EA Registration No.: R24124440 (FENG YINGJIE)

• Well Established Company
• Basic $ 2700 to $ 3500 + AWS + VB
• No Experience Welcome – Training will be provided
• Working Location: Tuas, Singapore (Company Transport Provided)
• Normal Working Hours (Monday - Friday)

Job Responsibilities:

• Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out incoming process inspection
• Authorise the rejection of parts if found unsatisfactory
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers
• Perform factory routine test and check of switchboards completed in the workshop
• Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints
• Maintain good housekeeping in the QA department
• Observe and adhere to safety rules during the performance of every task
• Initiate, recommend, or provide solutions to problem detected
• Control further processing and delivery of non-Conforming products until the deficiency has been corrected
• Follow the procedures of Quality Management System for effective implementation and control
• Carry out other responsibilities as and when assigned by the superiors

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Highlights

• Opportunities to work on award-winning projects
• Performance bonus for high-performer
• Good medical benefits

Job Description

We are seeking a detail-oriented and creative Interior Drafter to join our design team. The successful candidate will be responsible for creating detailed drawings and plans for interior spaces and collaborating with architects, designers, and clients to bring innovative design concepts to life. The ideal candidate will have a strong understanding of interior design principles, excellent technical skills, and a passion for creating functional and aesthetically pleasing environments.

Key Responsibilities

· Develop detailed floor plans, elevations, and sections for residential and commercial interiors using CAD software.

· Collaborate with interior designers to understand design concepts and project requirements.

· Prepare and revise drawings based on feedback from team members and clients.

· Incorporate materials, finishes, furnishings, and fixtures into design plans.

· Conduct site visits to gather measurements, assess conditions, and document existing spaces.

· Assist in the preparation of presentation materials, including 3D renderings and mood boards.

· Maintain accurate project documentation and ensure compliance with industry standards and regulations.

· Stay updated on the latest trends in interior design and drafting technologies.

· Communicate effectively with clients and team members to ensure project goals are met.

Qualifications

· Proven experience as an interior drafter or in a similar role.

· Proficiency in CAD software (AutoCAD & SketchUp) and other design-related software.

· Strong understanding of building codes, regulations, and construction methods.

· Excellent attention to detail and strong organizational skills.

· Ability to work collaboratively in a team environment and manage multiple projects simultaneously.

· Strong communication skills, both written and verbal.

· A portfolio showcasing relevant design and drafting work is required.

Perks/Benefits

• Opportunities to work on award-winning projects
• Performance bonus for high-performer
• Good medical benefits
• Friendly Working Environment
• Good Career Growth

Interested candidates, please send your resume and portfolio to [email protected].

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Electrical Engineer/Field Service Engineer (Marine/Electrical)
• Working Location: Tuas West
• Working Hours: Monday – Friday, 8 am – 5.30 pm (One Saturday per month, 8 am – 12 pm)
• Salary Package: Up to $3,300 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Carry out testing and commissioning related to marine propulsion systems, power generation systems (Marine and Land), deck machinery, etc.
• Conduct hands-on fault diagnosis, troubleshooting, and maintenance of marine systems/components in workshops and on-board vessels.
• Perform hands-on work in mechanical repairs, installation, and removals.
• Provide support to the project team on the implementation of new projects.
• Provide technical support to customers.

APPLY NOW!!!

• Minimum 2 years of related experience.
• Minimum Higher Nitec in Electrical Engineering, preferably Major in Power.
• Proficient in Microsoft Office.
• Candidates with experience in Electrical Control Systems are preferred.
• Comfortable with traveling (Anchorage/Local/Overseas) on short notice and at odd hours.
• Comfortable with working outdoors and onboard.
• Inexperienced candidates are welcome to apply, as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65623 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

About our client: Our client is an international engineering and project management consultancy that specializes in infrastructure and environmental projects.

*Please note that this role will be hired on a contract basis to support our client's project.

*Work Location: Tuas

About the role: The EICA Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 5 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas or power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the electrical team for project implementation at site.
• Proactive attitude and solution orientated personality with leadership mentality and for the EICA discipline, assisting project director for the contract execution.
• Strong capability and experience on 66kV, 10.5kV, 6.6kV and LV related power distribution equipment and cabling installation and commissioning requirement. Experience of large power transformers, generator circuit breakers, MV switchgear, protections and control equipment, MCC and UPS and DC system is expected.
• Having good understanding and interpretation of SLD, protection and metering SLD, schematics and cabling drawings.
• In depth of understanding for electrical power automation for electrification of WtE project.
• Contracts management in managing site works while maintaining swift communication with client and contractors for the WtE project
• Familiar with SS638 requirements on electrical installations in Singapore.
• Having multi-discipline coordination attitude in execution of electrical works
• Basic knowledge of instrumentation and control equipment for site works
• Review the submittals from Contractors for electrical installation and commissioning procedures of various sub-packages.
• Engage in site meetings with technical discussion contractor and client
• Joining site inspection for contractors works.
• Participation of FAT and SAT of electrical equipment
• Ability to use Navisworks to review 3D BIM Model for routing of site utilities.
• Review of DCS / PLC system configuration, topology and controller, RIO engineering deliverables for the implementation of WTE automation systems
• Review the submittals from Contractors for Process Control like STG package, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, EMIS, PFMS, Communication Network Infrastructure etc.
• Essential understanding of P&ID of process engineering
• Engage in Technical discussion for all control system related issue with contractor and client
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation of FAT of automation equipment DCS, EMIS, PMS, PLC, Weighbridge systems etc
• Provide Technical support in Testing and Commissioning of WTE plant.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: R1325507

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg. No: R1325507

Job Responsibilities:

• Design and build data pipelines: Create the infrastructure to collect, process, and store data from various sources.
• Develop data assets platform: This platform provides a centralized repository for managing and accessing data assets.
• Implement automated SQL generation: Create tools and processes to automatically generate SQL queries based on user-defined criteria or business requirements. This can involve using techniques like query templates, metadata-driven generation, or machine learning algorithms.
• Create new IPs in Singapore in area of expertise
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development
• Overseas process development support for short term assignments

Job Requirements:

• Masters or PhD in relevant field, Computer Science, Data Science or Statistics Applied Sciences
• Programming skills : Proficiency in programming like Python, SQL, Java, or Scala is essential for data manipulation and automation.
• Data Warehousing and ETL: Understanding of data warehousing concepts, ETL (Extract, Transform, Load) processes, and tools like Informatica, Talend, or Airflow.
• Database Management: Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra) is crucial.
• Cloud Platforms: Experience with deploying and managing data infrastructure.
• Data Modelling: Ability to design and implement data models that effectively represent business requirements.
• Data Quality: Understanding of data quality concepts, validation techniques, and tools.
• Automation Tools: Familiarity with tools like Apache Airflow, Kubernetes, or Ansible for automating data pipelines and infrastructure.
• Machine Learning: Basic understanding of machine learning algorithms can be beneficial for certain automation tasks, such as query optimization or anomaly detection.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format or please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lee Jun Siong (Johnson)

EA Personnel Reg No: R24120242

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a Electrical and Instrument Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Job Responsibilities of Electrical and Instrument Engineer:

• Review project specs to ensure equipment design meets contract requirements.
• Prepare, review, and approve instrumentation and electrical deliverables (e.g., lists, data sheets, diagrams, schedules).
• Create material requisitions and perform technical bid evaluations for electrical and instrumentation equipment (e.g., transformers, MCCs, flowmeters, control valves).
• Develop engineering standards and procedures for design and production.
• Monitor project costs, timelines, and compliance with technical specifications.
• Attend technical and HAZOP review meetings to address client feedback.
• Support plant start-up, commissioning, troubleshooting, and manual preparation.
• Provide technical support to sales, engineers, and project managers.
• Self-manage daily engineering tasks while adhering to health and safety protocols.

Requirements

• Bachelor’s degree in engineering discipline
• 5 years’ E&I experience in water treatment industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

*Seeking for a Software Developer with minimum 4 years of Software Development skills in Risk Enterprise Applications using Java*

THE COMPANY

Poised with solid growth plans, the company is expanding their foothold in the market. Currently, the company seeks for a Software Developer to be part of their IT team.

JOB RESPONSIBILITIES

• Understand business users’ requirements
• Recommend software solutions to resolve users’ request (Traders and Risk Analysts)
• Create and develop Risk Enterprise applications (Risk reporting, pricing, metrics etc.)
• Participate in other IT projects
• Work closely with other business and internal/external stakeholders e.g. IT vendor/IT team etc.

JOB REQUIREMENTS

• Degree in IT/Information Security/Computer Science or any other relevant education
• Minimum 4 years of Software Development skills in Risk Management/Enterprise Applications (Java)
• Knowledge in the IT skill sets:

o SQL and relational database experience

o Development tools e.g. Gitlab, Docker, JIRA, Prometheus, Kubernetes, Artifactory, Kibana, Junit

o Cloud- Azure or AWS (Hybrid environment)

o Service oriented technologies e.g. JSON, Drop Wizard, Spring Boot, Protobuf. REST

o Web development using modern frameworks- ReactJS

• Independent, highly analytical, proactive and has good communication and interpersonal skills

If you will like to explore this opportunity, please email your resume in Microsoft Word format to [email protected]

We thank you for your interest and will contact shortlisted candidates for more detailed discussion.

For more job openings, please visit our website at https://resolutehunter.com/opportunities/

EA Licence 18C9105

EA Reg R1105305

Specific Responsibilities:

• Assess and address cybersecurity risks stemming from non-compliance with policy requirements during the procurement of medical equipment, including both newly acquired and vendor-loaned equipment.
• Document and present instances of non-compliance to relevant stakeholders, securing necessary approvals from the Ministry of Health (MOH).
• Prepare cybersecurity risk assessment reports and evaluate risks associated with changes to the configuration or requirements of medical equipment.
• Maintain and update the Risk Register for medical devices, ensuring the effective implementation of mitigation measures for IT-related risks.
• Ensure medical equipment software is updated upon delivery and plan for regular patching and updates throughout its operational lifecycle.
• Continuously monitor the compliance status of medical devices with MDOTS requirements over their lifecycle.
• Participate in IT-related projects that involve medical equipment integration.
• Collaborate with the IT team and vendors to plan server configurations and install software for medical devices.
• Conduct ongoing monitoring of the health and vulnerability status of medical devices and their associated servers.
• Work closely with end users to manage cybersecurity incidents involving medical equipment, implementing necessary mitigation measures before returning the equipment to service.

Requirements:

• A degree in Computer Science, Information Technology, or a related field focusing on cybersecurity, with at least 3 years of experience in healthcare or cybersecurity assessments for the Engineer role.
• A degree in Computer Science, Information Technology, or a related field focusing on cybersecurity, with at least 5 years of experience in healthcare or cybersecurity assessments for the Senior Engineer role.
• Hands-on experience with various security tools and products (e.g., Fortify, AppScan, Nessus).
• Professional Licenses (if any): Candidates with certifications such as OSCP, CREST, CEH, CISSP, AWS, CISA, CISM, or a specialty in cloud security are highly preferred.

Interested candidates, who wish to apply for the advertised position, please email us an updated copy of your resume. We regret that only shortlisted candidates will be notified.

Job Code: MONT

EA Registration No. R22111084

EA License No.: 01C4394

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Senior Software Design Engineer

Job Info:

• Salary: $ 5,000 - $ 7,000 with AWS + VB + PB
• Benefits: Medical and Dental Claim
• Working Day: Monday - Friday
• Working Time: 8.30am - 5.30pm
• Location: Ang Mo Kio

Job Responsibilities

• Design and develop software for automated semiconductor process equipment.
• Enhance equipment performance through Continuous Improvement Programs (CIPs) and other development initiatives.
• Provide field support to upgrade systems and resolve customer issues.

Job Requirements:

• Minimum Degree in Electrical & Electronics Engineering, Computer Studies, or a related field.
• At least 3-5 years of experience in programming in a Windows (XP and above) environment.
• Proficiency in C++, VC++, MFC, SQL, and Object-Oriented Programming (OOP).
• Solid experience in developing multi-threaded control software and familiarity with SEMI SECS/GEM equipment connectivity standards and the Software Development Life Cycle.
• Hardware experience with Servo, Stepper Motion Controller, Analog Devices, and High-Speed I/O.
• Knowledge of PLC is an added advantage.
• Strong analytical and problem-solving skills.

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only shortlisted candidates will be notified.

Kok Jean Ray
Registration Number: R22110935
EA Licence No: 16C8004 (Elitez Pte Ltd)

Responsibilities

• Outline detailed requirements and scope of work for contractors.
• Manage the startup, testing, commissioning, and troubleshooting of equipment.
• Create and oversee the development of Single Line Diagrams, control schematics, and PLC/HMI programming.
• Ensure projects are executed efficiently and within established timelines.
• Provide preparation and support for installation teams.
• Open to traveling and taking on assignments internationally.
• Collaborate with the support team to deliver control software solutions.
• Identify and resolve system issues to minimize downtime and ensure smooth operations.

Requirements

• Degree Electronic/Electrical/ Mechatronic Engineering or related discipline
• At least 5 years of relevant working experience in process industries such as Food Manufacturing, Chemical Manufacturing industries.
• Experience in building of whole plant design.
• Control Panel Design Knowledge
• Candidate must be comfortable working in Tuas
• Candidate must be open for 1 year contract with possibility of converting to a permanent staff depending on the individual and project performance.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting,

using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Responsibilities:

• To follow strict instituted workplace security policy at the customer premises.
• Provide Level 1 and Level 2 technical support, perform networking routing and switching problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem, escalate to next level of support, track and get the issue resolved within the specified time as agreed with the customer.
• Perform configuration change activities as per instructions & guidelines.
• Provide problem status to the Service Desk and/or update into the ticketing tool according to the Procedures Manual.
• Perform day-to-day Network operation for the Network Infra-structure and Network Equipment at the customer/IBM premises, including performance monitoring, bandwidth monitoring.
• Work with customer's vendor to perform testing and preventative maintenance according to the schedule provided by the customer for the Network Equipment
• Perform periodic OS upgrade and Patching as and when required.
• To perform 24X5 rotational 12 hours shift onsite availability and 24X7 standby / remote support availability as and when needed for critical incidents.
• Provide proactive incident reports for all Network related problems, faults, events.
• Respond to all fault calls inclusive of emails and other forms of communications for Firewall related issues and problems reported
• Provide multi-vendor equipment support across a wide range of models and types of networking equipment
• Perform security activities like hardening/periodic health check/ ID validation and other compliance activities as per customer’s security policies and standards.
• Maintain/Update IT hardware and software inventory list and compliance related databases or similar Databases.
• Maintain the device inventory list for the customer when needed, Maintain the software/firmware for all the devices up to date. Maintain the inventory of certificates/license file and install/update/renew certificates/licenses as and when required.
• Subscribe to vendor notifications for the managed devices for vulnerabilities and review/validate/apply security patches pro-actively.
• Perform device activation / deactivation as per customer’s service activation and deactivation process.
• Maintain the IP address inventory and allocate new IP address when required by business.
• Engage third part vendors to resolve hardware issues and follow up till closure
• Monitor vendor End of Life / End of Support notifications for all In Scope Devices and inform the client.

Requirements:

• Diploma or Bachelor’s degree in in Information Technology, Computer Science, Engineering or equivalent.
• At least 5 years work experience providing Level 1 and Level 2 networking technical support in a 24x5 Network Operation Center environment.
• Must be able to work on 12 hours rotational shift on a 24X5 onsite and 24X7 standby / remote support team setup.
• CCNP certification preferred.
• Expert level knowledge in implementation and maintenance of Cisco Routers and Switches of all series.
• Good knowledge in Cisco IOS
• Good knowledge in implementation and operations support of NAC (network access control)
• Good knowledge in Aruba Clear Pass / Cisco ISE
• Good knowledge in Wireless Network / Access Points / Controllers support and troubleshooting
• Expert level understanding of the OSI or TCP/IP model
• Hands-on experience with monitoring, network diagnostic, Packet Tracers and network analytics tools
• Good knowledge on Firewall Products like Cisco ASA, FortiGate, Palo Alto, Checkpoint
• Good knowledge on Aruba ClearPass/Cisco ISE, Cisco wireless controllers
• Knowledge on F5 load balancers.