Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.

· Be part of a team in the implementation of Nationwide Mobile Network

· Preparation of proposals and documentation according to project standards

· Conduct site works, such as survey, site meetings, site handover

· Perform Commissioning and Integration of communication equipment

· Perform Coverage Walk Test and upload data for processing

· Competent to carry out troubleshooting with on-job training

· Coordinate with installation teams on site requirements and progress

· Update of site status

· Ensure Compliance with workplace safety, health and other regulatory requirements

Requirements

• Diploma in Electronics/ Mechatronics/ Electrical/ Communication Engineering or related discipline.
• Cad Software knowledge is an added advantage.

Job Responsibilities

1. Provide front and backend supports for the following security systems:

a. Access Control System – Integrated Security Management System (ISMS);

b. Electronic Key and Cabinet System: Key Management System (KMS);

c. Radio Communications: Digital Trunk Radio System (DTRS);

d. CCTV System – Video Surveillance Management System (VSMS);

e. Entry / Exit Access Turnstiles;

f. Crash Barriers; and

g. Vehicle Alert System

2. Perform corrective and preventive maintenance on all security systems.

3. Ensure critical system fault reported rectified within the shortest possible time to prevent disruption to operation.

4. Update and maintain fault rectification report.

5. Maintain security system stock inventory to ensure sufficient spare.

Job Requirements

• Meet the relevant Regulatory Authority's statutory requirement of minimum 21 years of age.
• Diploma/Higher NITEC/NITEC from a recognized training institute.
• Must be able to work rotating shifts, including weekends and public holidays
• Technical knowledge or experience in electrical/electronic work. IT Network knowledge would be an added advantage.
• Experience in CCTV or card access system.

Electrical and Control Design Engineer

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Electrical and Control Design Engineer | Up to $5.8k | 5 Days | Woodlands

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769
Senior Recruitment Consultant

• Working Days: 5 days’ work week
• Working Hours: 8:15 am–6 pm (Mon-Fri)
• Office Location: Joo Koon Crescent
• Salary Range: $2500 - $3500

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Fire Protection Engineer

• 5.5 Days || 8.30am - 5.30pm (Mon - Fri); 8.30am - 12.30pm (Sat)
• Working location: East (Near Changi Village area)
• $3500 to $5500

Requirements

• Diploma/ Degree in Mechanical Engineering/Building Services
• 5 years of relevant experience preferred
• Experience in Water Mist system and/or foam system is added advantage

Job scope

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples
• To liaise and work with relevant authorities, sub-contractors or clients on shop drawings, materials and samples
• Review and align Fire protection design drawings to ensure compliance with design specifications and guidelines (Sprinkler System, Fire Alarm System, Hose reel System, Wet/Dry riser system, Fire Hydrant System, Fire man intercom system)
• Knowledge in M&E and able to Identify discrepancies between M&E, structural, ID, architectural and client provisions
• Manage and execute project as per the schedule
• To attend meeting with contractors to address issues and update progress
• Study and reviewing of drawings, specifications for compliance
• Allocate work to supervisors and ensure jobs are correctly and properly achieved within standards and SOP.
• Plan and lead testing and commissioning of the fire protection systems.
• Follow up with site / authority inspections, defects rectifications of the fire protection work.
• Plan and prepare OMM, training, As-Builts drawings for handing over of completed fire protection systems to client.
• Follow up with maintenance of fire protection systems during DLP

Interested personnel kindly contact WhatsApp: https://wa.me/6592994753 (Marcus)

Tan Meng Liang Reg No: R23115923

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Company located at Woodlands

• Working hour: 8:30am – 5:30pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Automation Electronics Manufacturing Company

Job Scope

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirement

• Degree in Electrical Engineering / Electronics Engineering or related disciplines
• 2 to 4 years of relevant experiences and roles in Industrial Automation

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $5500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer
• To successfully completely New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ)
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes
• To update the status of on-going programs to the management
• To consistently pursue for new customers
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma / Degree in Mechanical Engineering/Precision Engineering or relevant qualification with minimum 2-3 years relevant working experience
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Working Days: 5 days’ work week
• Working Hours: 8:15 am–6 pm (Mon-Fri)
• Office Location: Joo Koon
• Salary Range: $2500 - $3500

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Electrical and Control Design Engineer

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Electrical and Control Design Engineer

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Responsibilities

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples
• To liaise and work with relevant authorities, sub-contractors, main contractor or clients on shop drawings, materials and samples
• Review and align ACMV design drawings to ensure compliance with design specifications and guidelines
• Knowledge in M&E and able to identify discrepancies between M&E, structural, ID, architectural and client provisions
• Manage and execute project as per the deadline
• Attend meeting with subcontractors / contractors / clients to address issues and update progress
• Study and review drawings, specifications for compliance
• Allocate work and ensure jobs are correctly and properly achieved within standards and SOP.

Requirements:

• Diploma / Degree in Mechanical Engineering
• Candidate with more than 10 years of relevant experience will be considered for Senior position
• Preferably candidate with relevant working experience in the Construction Industry especially in ACMV system installation
• Sound knowledge in ACMV System, Local / International Code of Practice / Standard, Green Mark Requirement, Hydronic / Static Calculation, BIM, Revit, Autocad would be an advantage
• Good working attitude and a team player
• Proficient in Microsoft Office

Job Description

• Supervise and coordinate the activities of site contractors;
• Monitor job progress and ensure that civil contracted works meets all practical, commercial, requirements of productivity, quality and contract target completions;
• Ensure all Structural work is carried out within established budgets and schedules;
• Ensure all design work conforms to the codes and standards used by the client, or to agreed industry standards.
• Implement and oversee site projects assigned to ensure smooth project execution
• Manage internal and external contractors well to ensure quality of work and scope of work is within specifications.

Requirements

• Degree in Civil/Structural Engineering recognised by the Professional Engineers Board Singapore
• Min 5 years of HDB new build or JTC projects relevant working experience
• Good communication skills and a team player
• Positive working attitude and highly adaptable

Roles and Responsibilities

1. Planning and coordination, and ensuring schedule aligns with project timelines and client deadlines

2. Understanding regulatory requirements and ensuring that all procedures comply with relevant directives.

3. Preparation in accordance to specified standards to ensure accuracy.

4. Troubleshooting and problem-solving, to identify any issues or non-compliance, and to develop solutions for mitigating any problems.

5. Preparing detailed test reports and documenting any procedures, results and conclusions, and ensuring thoroughness and accuracy while complying with regulatory requirements

6. Communicating findings to relevant stakeholders, including project managers, and regulatory bodies.

7. Stay up-to-date about advancements in techniques and technologies and to implement best practice to enhance testing efficiency and accuracy.

8. Providing training and support to other team members on procedures and standards and educating the organisation about the importance of compliance and its impact on product quality and regulatory approval.

· 5 days’ work week

· Central area near MRT

· Reputable and stable organization

Job Responsibilities:

· Provide pre-sales and post-sales technical support to customers and internal sales team, handling customer NDA and sample request

· Collect customers’ feedback and provide recommendation to customer for design requirements, product enhancements and capture new product opportunities

· Responsible for identifying and clarifying any technical issues related to new or existing products, and clearly communicate findings to the respective business unit

· Hands-on technical support to customers, documenting problems, and suggesting solutions

· Report design, reliability and functional problems to the appropriate groups within company & associate groups and work to solve problems

Requirements:

· Degree in Engineering (Electronics) or equivalent

· 5 years of technical customer support experience in semiconductor industry

· Field experience or hands-on practice or knowledge of multi-disciplinary system design and development

· Knowledge of Smart Card, RFID and microcontroller products; knowledge of physical access control and the security industry is desirable

· Experience with or knowledge of one or more of: CCD, CMOS image sensors, image capture, video standards, image processing

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

General Overview

This position is part of the site Mechanical team that provides technical/maintenance support to the Operation and Project teams in LNG Terminal. He/she would be mainly responsible for overseeing the safe and reliable operations and maintenance of the Terminal assets from the Mechanical discipline perspective.

The incumbent is also responsible for establishing, reviewing and overseeing the relevant mechanical design elements of new build equipment / asset enhancement activities and implementation of minor mechanical engineering projects, while ensuring the overall mechanical integrity of the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical/maintenance support and solutions to the terminal operation Teams including supporting the development of maintenance strategy focusing on equipment reliability, compliance, spares inventory requirement, preventive and predictive maintenance programmes and mechanical maintenance procedures for mechanical equipment.
• Lead the maintenance, troubleshooting, repair, commissioning and replacement of mechanical static equipment and piping systems.
• Manages the in-house contractor and equipment vendor to execute mechanical work/improvements within the terminal to ensure safe work execution and gas supply reliability
• Responsible to ensure compliance to applicable regulations/industry best practices, safe to operate, fit for purpose, maintainable and reliable for the site’s modified or newly build mechanical systems (such as marine loading arm, pumps, pressure vessel, safety device , etc).
• Manage and ensure list of statutory equipment (lifting machine, lifting gears, pressure vessel, safety valves, etc) are timely serviced and inspected in accordance to statutory codes and compliance standards
• Perform root cause analysis on equipment failure and provide recommendations to resolve technical issues which may also arise from vibration, RT, UT, oil and other analysis as part of predictive maintenance programmes
• Manage and maintain historical information on static and rotating equipment such as running hours, data statistical information on all plant shut down and loss of production events caused by mechanical systems, engineering documents and review applicable codes and standards for compliance purpose
• Lead technical discussions, execute and manage project schedules and cost and collaboration with external and internal stakeholders, vendors for end of life and improvement project using SLNG Management of Change (MOC) process for mechanical equipment
• Liaise with external stakeholder including government agencies on approval and risk of shutdown of mechanical system that will affect gas-send out
• Participate in RCA, RBI, HAZID, HAZOP, Model Review studies for mechanical packages, co-ordinates and close out Mechanical related issues
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose

Work Experience

• Minimum of 3-5 years’ experience in maintenance of plant equipment, rotating machinery and static equipment, preferably in oil/petrochemical or related industries
• Good knowledge and experience working on different types of in-service pipeline inspection. Knowledge of the LNG / natural gas or other hydrocarbon industries an advantage
• Relevant technical experience in maintenance of mechanical/ machinery systems i.e compressor, pump, pressure vessel, hydraulic components and piping system.
• Conversant with local codes, regulations and standards, equipment inspection and schedule requirements. Certified in API, vibration and other analysis standards will be well regarded
• The incumbent should possess the following personal attributes:

1. A team player who can work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments
3. Willing to take up new challenges and responsibilities

Education

• Bachelor Degree in Mechanical Engineering or other relevant Engineering/Technical disciplines
• Candidates with professional accreditation or affiliation to professional bodies of engineers will have an advantage

Job Description & Requirements

- Administer project planning and project execution
- To study drawings, specifications and contracts to understand project requirements
- Willing to learn and hands-on
- Liaise with client, consultants & main / sub-contractors and coordinate for site activities arrangement
- Perform site inspection and ensure all project activities are performed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner
- Assist in cost control and estimating activities;
- Planning and deployment of resources such as manpower, machinery, equipment and material
- Preparation of report, Method Statements and technical submissions
- Ensure the project complies with regulations and clients’ specifications
- Adhere to safety and health regulations and aim for zero accident in the workplace
- Ensure safety and housekeeping is to maintained to the highest standard
- Prepare job completion record and progress claims
- Continually seek improvements in the work systems
- Ensure all company reports and documentation are completed accurately and on time;
- To perform Ad-Hoc duties as per assigned

- Fresh Graduates are welcome to apply

Senior Design Engineer

5 days
9am-6pm
Kallang Ave
$5000 to $7000

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :
  1) Design of automation or semiconductor equipment
  2) High precision machine design
  3) Design of High Speed Pick and Place mechanisms
• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Under administrative supervision of the Technology, this position is responsible for the deployment and maintenance of a cloud-based applications infrastructure.

Responsible for deploying, automating, maintaining, troubleshooting and improving the systems that keep the backend infrastructure running smoothly. The role requires you to have hands-on technical experience and a can-do approach towards environment automation / management and continuous improvement.

Job Duties:

• Deploying, automating, maintaining, and managing AWS cloud-based production system, to ensure the availability, performance, scalability and security of productions systems.
• Build, release, and configuration management of production systems.
• Pre-production Acceptance Testing to help assure the quality of our products / services.
• System troubleshooting and problem solving across platform and application domains.
• Suggesting architecture improvements, recommending process improvements.
• Ensuring critical system security using best in class cloud security solutions.
• Evaluate new technology options and vendor products.

Skills and Requirements:

• Bachelor’s degree in computer science or other equivalent technical discipline.
• 1+ years’ experience with using a broad range of AWS technologies (e.g., EC2, RDS, ELB, EBD, S3, VPC, Glacier, IAM, CloudWatch, KMS) to develop and maintain an Amazon AWS based cloud solution, with an emphasis on best practice cloud security
• AWS Certified Solution Architect (Associate) is preferred.
• Conversant with infrastructure definition tools such as Cloud Formation and Terraform
• Experience as a DevOps Engineer in a 24x7 uptime Amazon AWS environment, including automation experience with configuration management tools.
• Scripting Skills: Strong scripting and automation skills.
• Operating Systems: Windows and Linux system administration.
• Monitoring Tools: Experience with system monitoring tools.
• Problem Solving: Ability to analyze and resolve complex infrastructure resource and application deployment issues.
• Experience with other Clouds such as Azure or GCP can be considered.

Note: Proceeding to apply on this job post means you have read, understand and agreed to WPH DATA PROTECTION NOTICE FOR JOB APPLICANTS in the link below.

https://www.wphdigital.com/notices

Job Purpose

To take charge as process/product owner role for processes transferred from MF or customers. To deliver KPIs right from process setup, qualification, tapeout, prototype to mass production phase.

Job Description

• To meet key process/product qual milestones set e.g. Tapeouts (NTO/RTO), PRS matching, ERA, WAT/yield matching, HTOL/ESD/Latchup etc
• Co-work with transfer team and Fab modules to deliver robust integrated process to enable a successful production volume ramp from development/pilot stage.
• Key Fab interface role working directly with customers to address their needs, product performance in terms WAT/yield, conference calls and customer audits etc
• Own process FMEA, PCP for processes under your ownership.
• Own SPC and CITs with modules/QA on inline and WAT Cp/Cpk/OOC performances to meet Fab and customer’s index.
• Manage daily ops related logistics in terms of inline/WAT disposition with related parties to enable smooth wafer shipment.
• To co-work with product engineer to perform device/process corner splits to check out product yield window.

Job Requirements

• Bachelor’s Degree preferably in Engineering with semiconductor process or device knowledge
• A minimum of 3-5 years of relevant experience in technology development, product transfer or process integration related scope.
• Good presentation and communication skills
• Independent and adaptable to different culture fast
• Hardworking, adaptable and able to work independently and collaboratively with teams
• Ability to thrive and meet timelines in a fast-paced and dynamic result-driven environment

Job Purpose

To take charge as process/product owner role for processes transferred from MF or customers. To deliver KPIs right from process setup, qualification, tapeout, prototype to mass production phase.

Job Description

• To meet key process/product qual milestones set e.g. Tapeouts (NTO/RTO), PRS matching, ERA, WAT/yield matching, HTOL/ESD/Latchup etc
• Co-work with transfer team and Fab modules to deliver robust integrated process to enable a successful production volume ramp from development/pilot stage.
• Key Fab interface role working directly with customers to address their needs, product performance in terms WAT/yield, conference calls and customer audits etc
• Own process FMEA, PCP for processes under your ownership.
• Own SPC and CITs with modules/QA on inline and WAT Cp/Cpk/OOC performances to meet Fab and customer’s index.
• Manage daily ops related logistics in terms of inline/WAT disposition with related parties to enable smooth wafer shipment.
• To co-work with product engineer to perform device/process corner splits to check out product yield window.

Job Requirements

• Bachelor’s Degree preferably in Engineering with semiconductor process or device knowledge
• A minimum of 3 years of relevant experience in technology development, product transfer or process integration related scope. Fresh grads can be explored with relevant semiconductor device knowledge.
• Good presentation and communication skills
• Independent and adaptable to different culture fast
• Hardworking, adaptable and able to work independently and collaboratively with teams
• Ability to thrive and meet timelines in a fast-paced and dynamic result-driven environment

Our esteemed client, an established MNC, is searching for an QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

SepPure Technologies is a CleanTech company that is revolutionizing the energy-intensive chemical separation processes through the application of novel membrane materials and processes. If you enjoy working in an innovative environment, we have a great opportunity for you. At SepPure Technologies, we believe in making a positive impact on the world through sustainable technology. Our chemical-resistant nanofiltration membranes are disrupting traditional chemical separation processes, such as distillation and evaporation, and reducing global energy use, emissions, and pollution. With up to 15% of the world’s total energy spent on industrial-scale chemical separations, SepPure Technologies’ sustainable process is a game changer. We are currently working on transformative projects edible oil, pharmaceutical, semiconductor, solvents, and fine-chemical industries. Join us on our mission to create a sustainable future through CleanTech innovation.

Role Summary

As a QHSE Engineer / Senior Engineer, you will play a critical role in ensuring our quality, health, safety, and environmental standards are met. This role offers the opportunity to develop and implement robust QHSE frameworks, ensuring compliance while fostering a culture of continuous improvement. You will work closely with cross-functional teams to support operational excellence and sustainability initiatives.

Responsibilities

• Develop, implement, and maintain Quality, Health, Safety, and Environmental (QHSE) management systems in compliance with industry standards and regulatory requirements.
• Conduct regular audits, inspections, and risk assessments to ensure compliance with QHSE policies and procedures.
• Identify areas for improvement in QHSE processes and recommend actionable solutions.
• Ensure the timely maintenance of all assets, including equipment and facilities, and maintain accurate and up-to-date maintenance records.
• Obtain and renew licenses and permits required from regulatory agencies such as NEA, SCDF, MOM, and other relevant authorities.
• Conduct monthly safety briefings, toolbox meetings, and other safety awareness initiatives to foster a culture of safety across the organization.
• Provide regular updates on QHSE status and initiatives through email newsletters and other internal communication channels.
• Coordinate and monitor QC testing (incoming materials, in-process, and final inspections) in alignment with company SOPs.
• Investigate and resolve quality issues, non-conformities, and customer complaints, implementing corrective and preventive actions.
• Prepare and deliver QHSE training programs to promote awareness and engagement across teams.
• Monitor and report on key performance indicators (KPIs) related to quality, safety, and environmental performance.
• Collaborate with internal and external stakeholders to ensure consistent adherence to QHSE standards.
• Maintain up-to-date documentation, including procedures, manuals, and records, for internal and external audits.
• Support new product development and operational initiatives by providing QHSE input during design and implementation stages.
• Stay updated on industry best practices and regulatory changes to drive continuous improvement in QHSE practices.
• Lead emergency response planning, drills, and incident investigations, ensuring proper follow-up actions are implemented and documented.
• Foster a proactive safety culture by encouraging hazard reporting, near-miss tracking, and continuous feedback from employees.
• Perform any other duties assigned to support organizational goals.

Requirements

• Bachelor's degree in Engineering, Quality Management, or a related field.
• 2–5 years of experience in QHSE roles within manufacturing or related industries. (Senior Engineer candidates should have 5+ years of relevant experience.)
• In-depth knowledge of ISO 9001, ISO 14001, and ISO 45001 standards.
• Experience in conducting audits, risk assessments, and implementing corrective actions.
• Strong analytical and problem-solving skills, with a focus on data-driven decision-making.
• Proficiency in Microsoft Office Suite and reporting monthly updates.
• Excellent verbal and written communication skills.
• Ability to work collaboratively in a fast-paced and innovative environment.
• Relevant certifications (e.g., WSH, QMS Internal Audit, or equivalent) are a plus.

Why Join Us?

You will get an opportunity to work in a fast-paced start-up environment, take ownership of tasks, and make a significant contribution to our company's growth. Our internship program will provide you with real-world experience, mentoring, and networking opportunities.

If you're excited about the chance to shape the future of our quality processes and help build a world-class product, we'd love to hear from you.

SepPure Technologies is an equal opportunity employer and is committed to fostering a diverse and inclusive workplace. We encourage applications from candidates of all backgrounds and experiences.

To apply, please submit your CV and cover letter, detailing your relevant experience and interest in the position. We thank all applicants for their interest; however, only those selected for an interview will be contacted.

The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural). Preferably have done data centre, marine offshore, and mixed-development projects.
• Have completed at least 1 project (data centre, commercial bldg., industrial)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred