Responsibility

• Responsible for high-performance block implementation (RTL to GDSII).
• Perform block level floor planning, power grid implementation, APR placement, timing optimization, CTS and routing.
• Close the design to meet timing, power budget and area targets.
• Run physical verification flows (DRC/LVS/EM/IR), and implement fixes to meet the requirements.
• Implement ECO’s to address functional bugs, timing and physical verification violations.
• Responsible for the generation and maintenance of block-level STA constraints and performing STA signoff checks.
• Responsible for timing model generation and supporting the successful integration of blocks into SOC.

Qualification

• At least 3 years of hands-on experience in digital-physical design.
• Bachelor/Master’s degree in Electrical Engineering with an emphasis in IC design
• Experience with digital Physical design and Static Timing Analysis
• Experience in floor planning and routing.
• Experience in advanced process nodes (5nm).
• Good experience with Synopsys implementation tools (DC, ICC2), and experience with Cadence (Innovus) implementation tool is a plus.
• Experience in Mentor Verification tool, Calibre.
• Proficient in TCL coding, Perl/Python knowledge is a plus.
• Good written and communication skills.

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

Job description

• Prepare drawings for the production line & provide design information to customers upon their requests.
• Follow up on customers’ requests & requirements. Provide on-site & off-site service to customers.
• To pick up any orders for fabrication or modification from customers.
• To abide by all contractual assignments and rules and regulations in any OEM maker contract.
• Require traveling or attached to overseas assignment and will be subjected to overseas allowance.
• To follow all duties and responsibilities assigned by the management or superiors.

Requirements

• Degree / Diploma in Mechanical Engineering or equivalent
• Proficient in CAD software, preferably in AutoCad & SolidWorks
• Preferably with knowledge in Jigs & Fixtures design
• Preferably with experience in the Semiconductor industry
• 3-5 years of relevant experience

Description:

• Engage in projects focused on Environmentally Sustainable Design (ESD).
• Oversee initiatives that pertain to overall sustainability, decarbonization, and carbon advisory services.
• Deliver comprehensive energy assessments and compare energy usage against best practice guidelines and net zero strategies for master planning within Singapore and internationally.
• Offer cost-efficient solutions to project teams aimed at enhancing building performance, decarbonization, and sustainability efforts.
• Conduct research, review findings, recommend, and implement leading practices within sustainable building design and systems.

Job Requirement:

• Bachelor’s or Master’s degree in M&E, Architecture, building services, building sustainability or a related field
• At least 3 years of relevant experience in Environmental Sustainable Development (ESD).
• Strong project management abilities to effectively oversee and manage tasks, budgeting, and timelines.
• Collaborative team player who is eager to learn, share ideas, and support colleagues with their responsibilities as needed.
• Highly motivated and proactive individual with a strong interest in discovering innovative solutions.
• Extensive experience with computer systems and proficiency in MS Office applications.

Responsibilities:

• Develop printed circuit board designs which satisfies the customer's requirements and follow customer’s established DFX guidelines

• Generate all data required for the fabrication, assembly, and test of printed circuit boards to aid in the downstream processes

• Library creation and schematic drafting in PADS

• Work from components placement to Gerber generation in PADS

• Design high dense PCBs for power supplies and microcontroller circuits

• Follow safety spacing and constraints for international standards like IEC60950, IPC9592B, etc.

• Generation of BOM, assembly drawings and fabrication drawings

• Gerber review using CAM350

• Work as a team with electrical and mechanical engineers

Requirements

• Diploma/Degree in Electrical & Electronics Engineering

• 3 to 5 years of experience in PCB design

• Minimum 5 years of PCB Design Experience for senior position

• Full-fledged experience in PADS Layout, PADS logic and CAM350

• Experience in single and multilayer PCBs up to 6 layers

• Working experience in SMPS is an added advantage

• Able to work independently and as a team

• Dynamic and excellent interpersonal skills

Your Role

• Coordinate design drawings with consultants to comply with requirements of the authorities
• Review and provide solutions to technical problems as well as plan, monitor and report shop drawing production progress
• Prepare technical submissions for materials, construction methods and C&S shop drawings
• Resolve construction issues on drawings and liaise closely with Architectural and M&E teams as well as the authorities
• Supervise a team of BIM Modelers for the production of coordinated shop drawings and Concrete Body Plans

The Requirements

• Possess a Degree in Civil/ Structural Engineering with relevant design working experience with contractors
• Preferably a Professional Engineer registered with the Professional Engineers Board, Singapore
• At least 3 year(s) of working experience in the related field is required for this position.
• Be conversant in British & Singapore Design Standards
• Be independent, analytical, highly motivated with excellent team spirit and interpersonal skills

Location: Joo Koon
Employment Type: Full-Time

Our client is looking for a Piping Design Engineer to join our client's team to assist in the execution of various projects, focusing on Fire Protection Systems and Modular Skids. The successful candidate will collaborate closely with project teams to ensure smooth design development, documentation, and project milestones are met efficiently.

Responsibilities:

• Assist the project team in executing various projects.
• Collaborate with cross-functional teams to design and develop Fire Protection Systems and Modular Skids.
• Generate, update, and maintain technical documentation.
• Prepare and develop system P&ID and conceptual general arrangement drawings.
• Ensure coordination and progress of project tasks are on track by attending relevant meetings.
• Prepare drawings using AutoCAD and SolidWorks.
• Perform hydraulic calculations and generate reports.

Requirements:

• Diploma in Engineering or equivalent.
• At least 2 years of relevant working experience in piping design or related fields (fresh graduates may be considered).
• Proficient in CAD software (AutoCAD, 3D SolidWorks, etc.).
• Strong communication and teamwork skills.
• Enthusiastic, eager to learn, and able to work in a fast-paced environment.

------------------------------

Please APPLY NOW with detail updated resume in Microsoft Word Format

(.doc) to and must include the following information:

• Personal Particulars (with short residence address)
• Education
• Work experiences (period of employment & job duty) in point forms
• Reasons for leaving each employment
• Last drawn salary in each employment
• Expected salary
• Earliest work commencement date / Notice period

(We regret that only shortlisted candidates will be notified)

We are seeking a talented Mechanical Design Engineer to join our dynamic team. The ideal candidate will have a proven track record in designing mechanical systems and components, possessing strong analytical skills and a passion for innovation. You will be responsible for developing detailed designs and specifications for various mechanical systems, ensuring functionality, reliability, and manufacturability.

Key Responsibilities:

• Create and develop detailed designs for mechanical components and systems using CAD software (e.g., SolidWorks, AutoCAD, CATIA).
• Conduct feasibility studies and design reviews, ensuring that designs meet specifications and requirements.
• Collaborate with cross-functional teams (e.g., electrical, software, manufacturing) to integrate systems and resolve design issues.
• Perform simulations and analyses (e.g., thermal, structural, fluid dynamics) to validate design performance and reliability.
• Generate and maintain comprehensive documentation, including design calculations, specifications, assembly instructions, and parts lists.
• Evaluate and select materials and manufacturing processes for components.
• Support prototyping and testing of designs, analyzing test results and iteratively improving designs as necessary.
• Stay current on industry trends, technologies, and regulations to incorporate new knowledge into designs.
• Offer technical support during the manufacturing and assembly processes, addressing any issues that arise.
• Participate in project management activities, ensuring designs are completed on time and within budget.

Requirements:

• Bachelor’s degree in Mechanical Engineering or a related field; a Master’s degree is a plus.
• Minimum of [insert number of years, e.g., 3-5 years] experience in mechanical design engineering.
• Proficiency in CAD software (SolidWorks, AutoCAD, or equivalent) and experience with 3D modeling and drafting.
• Strong understanding of mechanical engineering principles, materials selection, and manufacturing processes.
• Familiarity with design calculation tools and simulation software (e.g., ANSYS, COMSOL).
• Knowledge of industry standards and regulations relevant to mechanical design.
• Excellent problem-solving, critical thinking, and analytical skills.
• Strong communication skills, both verbal and written, with the ability to work collaboratively in a team environment.
• Detail-oriented with a strong focus on quality and precision in design.

Preferred Qualifications:

• Experience in specific industries such as automotive, aerospace, consumer products, or heavy machinery.
• Knowledge of lean manufacturing and continuous improvement methodologies.
• Experience with project management methodologies and tools.
• Familiarity with product lifecycle management (PLM) software.

• World-Class consultancy firm
• Design project experience

RESPONSIBILITIES:

• Responsible for Electrical Engineering services for the projects from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as mentor to new employees and provide technical assistance
• Advise engineers on the project administration and contractual issues
• Conduct technical discussion on common design problems
• Assist in maintaining high quality standards of design and construction
• To promote esprit de corps amongst employees
• Responsible to participate and support the Company’s SHEQ within their scope of duties

REQUIREMENTS

• Bachelor’s Degree in Mechanical or Electrical Engineering.
• Accumulated around 6 years of experience handling M&E Engineering ideally in semiconductor or construction projects

OTHER INFORMATION:

• Location: depending on Project
• Working hours: 5.5 Days
• Salary: To be Discussed based on experience (Salary will commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

How To Apply:

This position is an excellent opportunity for a dynamic individual. It comes with stimulating challenges that will mould your capabilities and reveal your potential.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: (R1875905), Achieve Career Consultant Pte Ltd EA Licence No. 05C3451) (BEP) by clicking the ‘Apply link’ /

or call your friendly Consultant, David, at 9271 7510 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We would like to inform that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at https://www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

• Reports to the Design Manager
• Review/Develop design drawings and documents in accordance with project requirements
• Coordinate all design related matters and participate in regular/ad-hoc meetings with Clients / Design consultants / Viaduct specialists / Subcontractor
• Monitor and update design schedule regularly
• Prepare & review shop/fabrication drawings for temporary/viaduct structure
• Support Design manager & lead in-house design engineer/drafter

Job Requirements

• Minimum Degree in Civil Engineering or equivalent
• Minimum 3 years of relevant experience of design & construction of bridge/ viaducts/ roads/ highways
• Candidate with experience in LTA (Road/MRT/Viaduct) is preferred
• Technical expertise and knowledge of concrete material & structure design
• Proficient in proposal for structural systems
• Proficient in AutoCAD
• Proficient in Structural Analysis Software (MIDAS, SAP, STAAD etc.)
• Good attitude towards work and timeline
• Independent, analytical and good interpersonal skills
• Location : Woodlands
• Project : Viaducts

Job Description

• Interface with Design Engineering team for the release of new products (NPI) into Manufacturing
• Involve in product development and evaluate the design for manufacturability and reliability by participating in design reviews and the assembly of the prototype units.
• Drive continuous improvement to minimize Cycle time/Quality issues.
• Perform First Article qualifications for parts and obsolescence components.
• Generate and Maintain process and equipment work instructions, drawings, and other production document to conform to specifications.
• Work with suppliers to resolve component/yield/part problems in a timely manner and assist purchasing teams in driving supplier quality improvements and cost reductions efforts.
• Provide strong technical support to production team to resolve issues and ensure on time shipment.
• Perform detailed Failure analysis on Infant Mortality parts and come up with proposal and concepts to enhance performance.
• Apply 8D troubleshooting, including driving learning and standardization to improve spare part quality.
• Create ECO (Engineering Change Orders), Structuring BOMs and creating test and assembly documentation as needed.
• Provide fly and fix support on field escalations for analysis/resolution on any issue requiring in-depth knowledge on the product.

Job Requirements

• Master’s/bachelor’s degree in mechanical engineering/Mechatronics Engineering with 2 or more years of experience in high-mix-low-volume manufacturing
• Strong mechanical engineering fundamentals, including design principles, machine elements, materials, and fabrication methods.
• Proficient with CAD, ProE/Creo/Solidworks.
• Good Understanding of the Pneumatics, Computers, controls systems and sensors involved in Electromechanical stage/Robot.
• Strong troubleshooting and analytical skills to support technical issues, set-up experiments, and perform data analysis.
• Ability to read and understand Mechanical drawings and use a variety of precision testing and measuring instruments as needed.
• Experience in semiconductor equipment industry /manufacturing is preferred.
• Team player, Self-driven, Willing to learn.
• Expected to travel up to 20% of the time.

Responsibilities:

· Perform PCB schematic design and PCB artwork design to meet customers’ requirements and datelines.

· Design PCB layout not limited to high-density power supply, microcontroller circuits, RF circuits

· Component placement to Gerber generation using PCB design software

· Liaise with the customers in matters relating to artwork design.

· Liaise with the vendor on procurement of PCB and other materials

· Preparing BOM, engineering documentation & operating manual.

· Provide technical guidance in developing new PCB designs and updating existing designs.

· Develop PCB layouts, perform component placements and determine wire routings.

· Verify existing designs and recommend improvements.

· Recommend new design concepts and validate the concept feasibility using circuit simulations.

· Prepare design documentations, requirements specifications and PCB models.

· Prepare test specifications and test procedures and develop test fixtures.

· Perform PCB design testing and analyze test results.

· Assist in preparation of project schedules, budget and risks.

· Monitor and report project status to project lead on regular basis.

· Attend project meetings to discuss about project progress and issues.

· Ensure that project deliverables meet customer expectations.

· Propose process improvements to ensure PCB functionality, quality and reliability.

· Perform project updates according to changing customer requirements.

· Any ad-hoc duties assigned.

Requirements:

· Degree in Electrical & Electronics Engineering.

· Min 2 years of experience in PCB schematic design & PCB artwork design.

· Experience in hardware printed circuit board designs, board layout, testing, implementation and EMC/EMI qualifications

· Experience in electronics circuit design/ simulation and analysis, and PCB tools like Altium Designer

· Ability to prioritize and execute tasks in a high pressure environment, able to balance multiple projects and tasks, complete them successfully and within timeline

· Team player, with good problem solving and communication skills.

· Able to work well independently with strong personal work ethics and able to work with cross functional teams

1) Design and Development:

• Design and develop electrical systems, schematics, and layouts using CAD software (e.g., AutoCAD).

• Create detailed electrical drawings, wiring diagrams, and system specifications.

• Select appropriate components and materials based on design requirements.

2) Testing and Validation:

• Perform simulations, calculations, and analyses to ensure designs meet technical and regulatory standards.

• Develop and execute test plans for electrical systems and components.

• Troubleshoot design issues and provide effective solutions.

3) Project Management:

• Collaborate with cross-functional teams, including mechanical, software, and manufacturing engineers.

• Prepare and present design reviews, technical documentation, and project reports.

• Manage project timelines and budgets, ensuring timely delivery of design outputs.

4) Compliance and Standards:

• Ensure designs comply with relevant safety, quality, and environmental standards (e.g., ISO).

• Stay updated on advancements in electrical engineering technology and industry best practices.

5) Customer and Vendor Interaction:

• Liaise with clients to understand project requirements and provide technical support.

• Work with suppliers to select components and negotiate specifications.

Any other duties assigned by the Management as and when necessary.

Requirements

• Bachelor’s degree in Electrical Engineering or a related field.

• At least 2 years’ working experience in electrical design, preferably in the industry (e.g marine, automative or energy)

• Proficiency in electrical design software (e.g., AutoCAD Electrical or similar).

• Knowledge of PLCs, microcontrollers, or embedded systems is a plus.

• Familiarity with electrical codes and standards.

• Strong problem-solving and analytical skills.

• Excellent communication and teamwork abilities.

• Attention to detail and organizational skills.

We are located at 11A Tech Park Crescent Singapore 637842 (Tuas South).

Driven by the passion to improve quality of people’s lives, WS Audiology continues to grow as market leader in the hearing aid industry. With our commitment to increase penetration in an underserved hearing care market, we want to accelerate our business transformation in order to reach more people, more effectively.

We are hiring a Mechanical Design Engineer to be a part of our Behind The Ear (BTE) Development team.

What you will do

Design Engineer for new full BTE Hearing Aid projects:

• Design, develop and validate BTE Hearing Aids
• Implement new technologies or concepts into BTE Hearing Aid design
• Utilize various tools of specialization (CREO/ DFM/ DFMEA/ Tolerance Analysis/ Simulation etc.) to design, validate and improve existing designs
• Create and maintain BOM

Design Engineer for new Forefront projects:

• Lead forefront projects to ensure enhancement of technology for future hearing aid generations
• Perform forefront ideas/concepts with suppliers and/or Institutions
• Analyze competitor's product to learn good practices/design

Product Maintenance and support:

• Performs technical analysis related to process/design problems
• Supervise and follow up on support activities (Trial runs, FA approval, etc.) for timely processing of ECRs/ECOs

What you bring

• Bachelor's degree in Mechanical Engineering
• 2-5 years of relevant working experience designing plastic/metal/rubber parts in product design
• Experience in Tolerance Analysis, DFM and DFMEA

Who we are

At WS Audiology, we provide innovative hearing aids and hearing health services.

Together with our 12,000 colleagues in 130 countries, we invite you to help unlock human potential by bringing back hearing for millions of people around the world.

With us, you will become part of a truly global company where we care for one another, welcome diversity and celebrate our successes.

Sounds wonderful? We can't wait to hear from you.

WS Audiology is an equal-opportunity employer and committed to creating an inclusive employee experience for all. Regardless of race, color, religion, national origin, age, sex, gender, gender identity, gender expression, sexual orientation, marital status, medical condition, ancestry, disability, military or veteran status we firmly believe that our work is at its best when everyone feels free to be their most authentic self.

WAGO Group is an international, standard-setting supplier of electrical interconnection, automation, and electronic interface products and solutions. This family-run company is the world market leader in spring pressure connection technology. Whether in industrial, railway, or energy technologies, in the marine and offshore sectors, or building and lighting management, WAGO products and solutions provide safety and efficiency.

WAGO has been represented in Singapore with a wholly owned subsidiary for over 25 years and has a well-established local infrastructure.

WAGO started setting up an R&D Competence Center in Singapore in 2023 to better cope with the rising global market demand. The new R&D Competence Center operates within the already existing infrastructure in Singapore.

The new R&D Competence Center in Singapore focuses on the business areas of sensor technology and power electronics, which serve the industry, energy, building, and green mobility sectors.

We are looking for someone who enjoys and has experience in the mechanical design of industrial electronic products.

Roles & Responsibilities

• Responsible for planning, conceptualizing, and creating mechanical designs for electronics and power electronics products.
• Create and review technical drawings, plans, and specifications using Siemens NX.
• Collaborate with multi-disciplinary engineering teams to complete design for manufacturing (DFM) and design for assembly (DFA).
• Work with vendors and contractors efficiently to ensure timely completion of deliverables.
• Conduct thermal simulation and analysis using industrial software for development.
• Generate working prototypes for beta testing and customer demonstration, including 3D printing.
• Develop prototype testing processes, and perform testing and verification of new designs.
• Perform detailed documentation to track project development and design process.
• Manage BOM creation and maintenance within the PLM (Product Lifecycle Management) system.
• Ensure the project timeline is met and the project stays within budget.

Qualifications & Competences

• Bachelor's degree in mechanical engineering, or related technical discipline.
• Minimum of 5 years of relevant work experience.
• Sound knowledge of GD&T (Geometric dimensioning and tolerancing)
• Extensive experience using CAD software such as Siemens NX, Creo, or similar.
• Familiar with state-of-the-art 3D printing technology for prototyping purpose.
• Experience and knowledge of Industrial Design (ID) would be an advantage.
• Knowledge of FEA (Finite Element Analysis) would be an advantage.
• Knowledge and experience with special plastic molding techniques, especially overmolding or ultrasonic welding, would be an advantage.
• Ability to communicate effectively and clearly.
• Self-motivated and a great team player.

What can we offer:

• Exciting and diversified duties and responsibilities await you within a dynamic, international company environment that is experiencing sustainable growth.
• We provide you with a platform where you can further develop your passion and technical competence and onboard an exciting industry, and market-oriented career.
• We offer you an attractive, performance-related payment package. We focus on an efficient, process-oriented organization, where the individual responsibility and self-organization of our employees as ‘entrepreneurs within the company’ are particularly advanced.
• The company is one of the globally leading players in the connection and automation technology space offering to its customers innovative high-tech solutions.

WAGO Group is an international, standard-setting supplier of electrical interconnection, automation, and electronic interface products and solutions. This family-run company is the world market leader in spring pressure connection technology. Whether in industrial, railway, or energy technologies, in the marine and offshore sectors, or building and lighting management, WAGO products and solutions provide safety and efficiency.

WAGO has been represented in Singapore with a wholly owned subsidiary for over 25 years and has a well-established local infrastructure.

WAGO started setting up an R&D Competence Center in Singapore in 2023 to better cope with the rising global market demand. The new R&D Competence Center operates within the already existing infrastructure in Singapore.

The new R&D Competence Center in Singapore focuses on the business areas of sensor technology and power electronics, which serve the industry, energy, building, and green mobility sectors.

We are looking for someone who enjoys and has experience in the PCB layout design of industrial electronic products.

Roles & Responsibilities

• Support hardware developers on board schematic capture fulfilling design requirements.
• Responsibility for PCB layout in Cadence Allegro.
• Manage the layout design review prior to design release.
• Prepare and release all PCB documentation, and ensure the project timeline is met.
• CAD library administration including symbol, footprint generation and database administration.
• Creation of components’ and PCBAs’ 3D models and liaising with Mechanical Design Engineers on design constraints.
• Liaise with PCB manufacturers to clarify design requirements and resolve problem encountered.
• Liaise with Process Engineers of the product factory to clarify design requirements and resolve problems encountered during PCB assemblies.

Qualifications & Competences

• Minimum Degree/ Diploma in Electrical/ Electronic Engineering with 5 years working experiences in PCB layout design
• Knowledge in Cadence Allegro, Altium or any other electronics design software
• Experience in high speed, mixed signal, power and RF board design would be an advantage
• Sound knowledge of IPC-2221
• Good interpersonal skills to work with team members
• Self-motivated and able to work independently and efficiently

What can we offer

• Exciting and diverse duties and responsibilities await you within a dynamic international company environment experiencing sustainable growth.
• We provide you with a platform where you can further develop your passion and technical competence and onboard an exciting industry, and market-oriented career.
• We offer you an attractive, performance-related payment package. We focus on an efficient, process-oriented organization, where the individual responsibility and self-organization of our employees as ‘entrepreneurs within the company’ are particularly advanced.
• The company is one of the globally leading players in the connection and automation technology space offering to its customers innovative high-tech solutions.

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

What will you do?

• Develop & Build Sequence of Operations for any First of Kind BMS Control system
• Develop BMS control logic using EcoStruxure Control Expert (formerly known as Unity Pro) for M580 HSBY PACs using Customer Design Standards, Derived Internal Data Type (DDT) Lists, standard library of Derived Function Block (DFBs), and Sequence of Operations (SOOs).
• Update DDT lists based on final SOO (Control Philosophy) and logic development.
• Design applications using the standard DFBs as building blocks using existing Customer applications as templates for the program structure.
• Attend internal and customer meetings to review programs and SOO documents.
• Collaborate and succeed within a diverse global team.
• Ensure adherence to Project Playbook (Client Guideline) and Version Control Processes Tune PID loops
• Understand and be able to explain data structures, logic structures, and DFBs developed for program wide use
• Use QA/QC tools and processes

What qualifications will make you successful?

• Bachelor Degree or equivalent in Electrical/Electronics Engineering or Computer Science
• Excellent verbal and written communication skills in English
• Experience designing, implementing, troubleshooting, and commissioning BMS system and/or PLC/Process Automation applications, especially with Schneider Electric products in Data Centres
• Experience writing industrial control applications
• Strong problem solving and detective skills
• Ability to work effectively alone and in a group setting, team oriented, self-motivated, and results driven
• Work according to specified project playbook and commissioning plan while being resourceful and versatile in finding sources of information to solve problems.
• Attention to detail and commitment to delivering high quality solutions
• Multi-task, handle conflicting priorities, and triage issues.
• Knowledgeable in computer programming languages (VB, C#, C++)
• Knowledgeable in computer networking architectures, topologies, and hardware
• Proficient in the use of Microsoft operating systems and software applications
• Experience with industry standard communication protocols such as Modbus, OPC, Modbus TCP/IP and Ethernet IP, BACnet Experience with integrating devices from multiple vendors into a packaged solution
• Advanced understanding of electrical circuits.

What’s in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership

…and more!

Let us learn about you! Apply today.

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Familiar with AUTOCAD Software.

- Designing electrical system

- Ensure designs meet industry standards and regulations

- Knowledge of design techniques

- Prepare technical documentation and reports

- Responsible for producing schematic drawings

- Proficiency in electrical design software (e.g., AutoCAD, Solidwork)

- Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.

- Assist and collaborate with other project team members to comply with project requirements and meet project schedules

• Attend User / Client meetings acting as technical lead in regard to project management as required.
• Conduct internal training to staff for pre-sales engagement and ensure knowledge transfer of design methodology, cost modelling, etc. to employees.
• Manage each phase of the project from design to completion and ensure efficient use of resources and enhance cost-effectiveness.
• Supporting new business venture overseas
• Propose design concept.
• Summarize design requirement.
• Analyzing existing facility
• Conceptual sizing/design
• Risk analysis by checking consistency between tender and quotation specification.
• Prepare supplemental material (Spec, DWG) for quotation.
• Review BoQ (Material and quantity)
• Propose Value Engineering and technical review.
• Prepare presentation material for tender interview.
• Provide audit and consultancy services.
• Vigilant system support (for Mechanical Engineer)
• Site survey
• Draft proposal document
• Provide technical support.
• Provide CFD simulation report (for Mechanical Engineer)
• Project Management for new construction and D&B project in design phase working directly with clients, consultants, statutory authorities, and contractors.
• Leading or facilitating the design review meetings and design workshops.
• Feasibility study
• Assessment of mission critical building
• Concept & schematic design
• Summarize design requirement.
• Analyzing existing facility
• Schematic design report
• Design development (Spec., technical calculation sheet)
• Propose new, feasible innovation and stay abreast on the latest trend in the market.
• Product differentiation
• Detail design
• Arrangement of shop drawing with drafter
• Authority submission arrangement with QP
• Input for T&C requirement (prepare test script and ensure that the methodology is in line internally)
• Design Coordination with other discipline.
• Review of construction material / shop drawing / MoS
• Shop drawing coordination with sub-con/vendor & other stakeholders.
• Periodical inspection (internal check for quality improvement)
• Ensure site installation works are accordingly to project plans / designs / time frame.
• T&C consultation for FAT, SAT, and IST with Technical & Q&C department
• Handover submission arrangement with drafter team and project team (As build DWG)
• Required to learn and adopt working in Cloud, Design Collaboration and Model coordination and QA/QC own work.
• AutoCAD & Revit experience with Cloud Work-sharing (ACC) is desirable.
• Depending on project need, this position may be located On-Site or Off-Site and requires frequent travel to the project site.
• Any other duties assigned by Senior Manager

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Job Responsibilities:

Project Design and Development:

• Lead the design process for civil/structural engineering aspects of deep excavation projects.
• Develop detailed geotechnical design plans, ensuring compliance with relevant codes and regulations.
• Conduct engineering analyses, including stability assessments and structural integrity evaluations.

Technical Leadership:

• Provide technical guidance and mentorship to junior engineers and design teams.
• Review and approve design calculations, drawings, and specifications.
• Troubleshoot and resolve complex design and construction issues.

Stakeholder Collaboration:

• Collaborate with multidisciplinary teams, including architects, contractors, and project managers.
• Liaise with clients, regulatory authorities, and other stakeholders to ensure project requirements and standards are met.

Quality Assurance and Compliance:

• Ensure that designs meet local regulations, safety standards, and best practices.
• Participate in audits, inspections, and peer reviews of design work.

Project Management:

• Manage timelines, budgets, and resources for design deliverables.
• Support the preparation of technical reports and documentation.

Job Requirements:

• Bachelor’s or Master’s degree in Civil/Structural Engineering or a related discipline.
• Recognized professional engineering qualifications by the Professional Engineers Board of Singapore.
• A minimum of 10 years of relevant experience in civil/structural engineering, with at least 5 years focused on designing geotechnical works for deep excavation projects.
• Proven expertise in handling projects of a similar size and complexity.
• Strong knowledge of geotechnical design principles, soil mechanics, and structural analysis.
• Proficiency in relevant design software and tools (e.g., Plaxis, AutoCAD, STAAD.Pro).
• Excellent communication, leadership, and problem-solving skills.

Preferred Qualifications:

• Chartership or equivalent professional accreditation (e.g., PE, CEng).
• Familiarity with Singapore’s construction and regulatory environment.
• Experience with risk assessment and mitigation for geotechnical designs.

Job Description:

• Conduct equipment design & development work according to customers and internal specifications.
• Act as project lead to plan, organize and co-ordinate their respective project’s meetings to review design and ensure projects are kept to schedule.
• Maintain and control relevant documents related to R & D activities per requirements.
• Maintain, keep track and ensure Billed Materials is updated.
• Generate detailed 2D/3D drawings.
• Raise ECN for update of changes to design and drawings and follow up on approval and ECN flow.
• Provide technical support to process & production, supply chain & QA for review and trouble-shooting of design and drawings.

Requirements:

• Bachelor’s degree or master’s degree in mechanical engineering or relevant disciplines.
• At least a minimum 4 years of relevant experience in semiconductor or automation equipment design. Candidate with more years of relevant experience would be considered for Senior position.
• Proficient in Microsoft Office applications (Words, Excel, Powerpoint) are required.
• Strong understanding of mechanical engineering principles and engineering techniques are required.
• Plentiful experience of mechanical designs using Solidworks is preferred. Candidate with Autodesk/Auto CAD Software will be an advantage.
• Solid knowledge and experience in material properties are required for Senior position.
• Good communication, time management, problem-solving and decision-making skills are required for Senior position.
• Willing to travel for overseas projects if required.
• Basic salary commensurate with experience.

We regret to inform that only shortlisted candidate(s) will be notified.

Summary :

We are seeking a highly motivated and skilled Senior Hardware Engineer to join our client and play a critical role in the development of innovative electronic systems. In this role, you will drive the complete product lifecycle, from concept to production, ensuring the successful delivery of cutting-edge hardware solutions.

Responsibilities:

• Product Definition & Design:Translate product requirements into detailed technical specifications and system architectures.
  Develop and maintain comprehensive design documentation, including schematics, layouts, Gerber files, and verification reports.
  
• Technical Leadership & Collaboration:Lead and manage the hardware design process, collaborating effectively with in-house design teams, ODMs, and OEM suppliers.
  Proactively identify and mitigate technical risks, ensuring timely and effective resolution of design challenges.
  Foster strong communication and collaboration with cross-functional teams (software, mechanical, manufacturing) and stakeholders.
  
• Quality & Compliance:Ensure compliance with all relevant electrical safety and regulatory standards (e.g., EMC, safety).
  Optimize designs for thermal performance and power efficiency.
  
• Project Management:Manage all development projects in accordance with company processes and timelines.
  Track project progress, identify and resolve roadblocks, and ensure timely delivery of milestones.
  

Qualifications:

• Bachelor's degree in Electrical Engineering or a closely related field.
• Minimum 5 years of professional experience in hardware design.
• Strong foundation in digital and analog electronics, including:Microprocessor systems (e.g., ARM, x86)
  Memory systems (DDR, NAND, SRAM)
  Communication interfaces (USB, Ethernet, I2C, SPI, RS-485)
  Power electronics and thermal management
  High-speed digital design and signal integrity
  
• Proficiency in PCB design tools (e.g., Altium Designer, OrCAD)
• Experience with embedded systems design and development.
• Excellent problem-solving, analytical, and troubleshooting skills.
• Strong communication, interpersonal, and teamwork skills.

Preferred Qualifications:

• Experience with firmware development (bootloaders, BSPs).
• Knowledge of FPGA/CPLD design and implementation.
• Experience with design for manufacturability (DFM) and design for test (DFT).
• Experience with 3D modeling and mechanical design considerations.

Applicants who possess relevant experience are welcome to apply. Interested candidates kindly click the APPLY NOW button.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

EnviroDynamics Solutions Pte Ltd

Reg. No: R1324803

EA License No.: 12C6285

Piping Design Engineer

Working Days: 5 days’ work week

Working Hours: 8:15 am–6 pm (Mon-Fri)

Office Location: Joo Koon

Salary Range: $2500 - $3500

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279