Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

• Responsible for 3D product design and its requirements

• Lead in Mechanical and Engineering Design for Process Development or Product Design or Engineering solutions

• Create proof of concepts

• Generate engineering drawing with proper GD&T and Tolerance Stack up

• Define test requirements needed for all the designed products

• Perform Patent search for possible design infringement

• Drive Projects with tight timeline

• Any other duties as and when assigned

• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Diploma/Bachelor Degree in Mechanical / Industrial Engineering

• 2-3 years of relevant experience

• Good exposure in Plastic Injection molded parts design

• Knowledge of product design, engineering plastics behavior, product certification

• Knowledge of CAE simulation will be an added advantage

• Competent in Engineering calculations

• Hands on 3D CAD & CAE experience

• Good problem-solving skills with strong technical acumen

• Location: Pioneer/Joo Koon| Mondays to Fridays (8:30am to 5:45pm)

• Monthly salary x 13 + Variable Bonus. Monthly salary will commensurate according to experiences

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality,

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

• SGD 4,000 – SGD 8,000 + Variable bonuses
• Consultancy handles projects in government agencies, industrial, commercial & residential granting a competitive advantage
• Excellent career progression + Equal opportunities for advancement
• Attractive employee welfare benefit
• Location: Bugis area | Mon – Fri

Responsibilities

• Undertake design development and detailed designs.
• Attend site/ project meetings with clients, consultants and contractors.
• Familiar with engineering software and the latest code of practice.
• Senior hire would require to plan, coordinate, manages and supervises the civil & structural project.

Requirements:

• Degree in Civil/Structural Engineering from a recognized Institution;
• Working experience in a Civil & Structural consultancy firm.

Applicants are encouraged to include the following in their resume:

1. Expected salary
2. Notice period
3. Past project details – what kind of construction/building, etc

We regret to inform that only shortlisted candidate will be contacted.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Possess extensive knowledge of power plant systems and operations, along with strong leadership skills to lead a small team of engineers and technicians. This role is crucial for ensuring that all plant engineering tasks are executed correctly. The successful candidate will oversee plant engineering designs to guarantee that the plant operates efficiently and safely.

Key Responsibilities:

• Responsible for plant engineering design activities for power plant project including cable sizing calculation, cable routing, connection drawing, loop drawings, termination diagrams
• Work with 3D design team for 2D deliverables
• Lead, mentor, and manage a small team of engineers and technical staff
• Collaborate with different parties for plant engineering coordination and support site inspection
• Provide technical support for project manager for project engineering milestone deliveries
• Support purchasing team for technical evaluation and price optimization

Desired Characteristics:

• Knowledge of onshore power plant design engineering, prefer to have work exp in Singapore.
• Experience in coordination, leading and managing plant engineering teams.
• Familiar with complicated cable tray route, cable tray support engineering design, equipment layout, installation materials, cable glands selection, cable drum schedule, cable route schedule, cable termination material, and so on.
• Proficiency in relevant engineering software and tools, such as Revit, Navisworks, Autocad
• Min 6 years experience in Electrical composite plant project

Duration: 6 months (may be extendable)
Work Location: Ayer Rajah
Working hours: 8hours a day, 5 days a week

Industry: Manufacturing/ Production

Location: West

Working Hours: Monday Friday, 8:30am 5.45pm

Basic + Allowance + AWS + VB

Job Responsibilities:

• Responsible for 3D product design and its requirements
• Lead in Mechanical and Engineering Design for Process Development or Product Design or Engineering solutions
• Create proof of concepts
• Generate engineering drawing with proper GD&T and Tolerance Stack up
• Define test requirements needed for all the designed products
• Perform Patent search for possible design infringement
• Drive Projects with tight timeline
• Any other duties as and when assigned
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Bachelor Degree in Mechanical / Industrial
• 1-2 years of relevant experience
• Good exposure in Plastic Injection molded parts design
• Knowledge of product design, engineering plastics behavior, product certification
• Knowledge of CAE simulation will be an added advantage
• Competent in Engineering calculations
• Hands on 3D CAD & CAE experience
• Good problem-solving skills with strong technical acumen

Please email your updated CV in Words format to [email protected]

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

We regret that only shortlisted candidates will be notified

EA Personnel: Lim Jing Yee, Lena

EA Registration No.: R1872533

People Profilers Pte Ltd

20 Cecil St, #08-09, PLUS Building, Singapore 049705

EA Licence Number: 02C4944

Tel: 6950 9755

JOBID: L345WWYW

• Working Days: 5 days’ work week
• Working Hours: 8:15 am–6 pm (Mon-Fri)
• Office Location: Joo Koon
• Salary Range: $2500 - $3500

(Fire protection Engineering Company serving the Oil & Gas & Offshore market)

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: North-East

Job Description:

• Design and implement software solutions for automated semiconductor process equipment.
• Enhance equipment performance by implementing Continuous Improvement Processes (CIPs) and other development initiatives.
• Provide field support for upgrades and resolution of customer issues.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working Days: 5 days’ work week

Working Hours: 8:15 am–6 pm (Mon-Fri)

Office Location: Joo Koon Crescent, Singapore

Salary Range: $2500 - $3500

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

1) Relevant tertiary certificate in interior design

2) Know how to use Auto Cad software

3) job experience in autocad building drawing for

private housing, commercial and

industrial projects

4) six working days and work overtime to meet tight datelines if required

5) Bllingual is a plus point

6) Go to site to do site inspection

7) other duties assigned by the company

8) indepedent and self motivated

9) This position is open to local & overseas applicants

10) know 3D rendering

The Role

This position will work with Asset Managers in leading all aspects of design development works, including overall development management of new developments and existing assets across different sector classes ranging from commercial, retail, residential, industrial and logistics projects.

Job Responsibilities

• Conceptualise all development design requirements including preliminary massing, schedule of areas and specifications and formulate design briefs to ensure that these are aligned with the Company’s development strategy.
• Manage and control the development of design concepts/options, pipelines for the projects and to ensure these options/concepts are delivered on time and meet the Asset Manager’s Requirements.
• Manage the design consultants and liaise with all relevant authorities to meet the Company’s development strategy and Asset Manager’s requirement.
• Accountable and responsible for the management of the design development process from inception to completion.
• Ensure that the design meets the required quality and in compliance with regulatory requirements and corporate governance.

Job Requirements

• Master and/or Degree in Architecture.
• At least 8 years of relevant design development experience in the execution of Commercial, Retail, Residential, Industrial and Logistics projects, with the ability to draw, design and articulate key construction details for the building.
• Candidate with experience in Japan, Hong Kong, South Korea, or Vietnam projects is preferred.
• Technical skills in Autocad, Revit, Sketchup, Adobe in Design, Adobe Photoshop, Adobe Illustrator, Rhino, Grasshopper.
• Knowledge of parametric design and ability to write scripts would be an advantage.
• Technical skills in producing and developing architectural details and specifications.
• Seeks continuous improvement to design and processes through consistently challenging the status quo or value engineering the optimum solution to all aspects of the development.
• Ability to encourage the creation of solutions appropriate to the needs of Business Units, shareholders and environment.

We encourage you to apply if your work experiences and career aspirations are aligned to this position.
To learn more about Mapletree and explore other opportunities, please visit https://careers.mapletree.com.sg/

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team, ISP Design leaders in other sites, and Digital System Design Team
• Leading, supervising and mentoring a team of RTL design engineers

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 7+ years of Digital Design and verification related experience
• 3+ years project management / people management experience / skill
• Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Ability to lead teams and collaborate effectively with people in different functions
• Strong time management skills to ensure timely completion of deliverables
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

Design Assistant/Executive

Your primary roles are to create 3D models for RISIS products (jewellery, lifestyle, and sculpture), to operate our Rapid Prototyping (RP) Machine, to do 3D scanning of RISIS products and to do any modifications on the 3D scanned models. You are required to work closely with the Designers (Sculpting, Jewellery & Lifestyle) to generate high quality 3D-printed models for visualization or production purposes. You must analyse, evaluate, and repair CAD models suitable for Additive Manufacturing. In addition, you may be tasked to design and model corporate gifts products to enhance your knowledge and skills so that you have a better understanding of the whole process from conceptualizing, developing, and producing premium gifts.

Key Responsibilities:

• To create 3D models based on 2D drawings.
• To be able to visualize, create and repair CAD files/data (.STL, .OBJ, .3DM).
• To generate 3D models as per specifications given, either by scanning or by using company-provided 3D modelling software within the required deadline.
• To generate 2D image renders for visualization based on 3D models.
• To operate and conduct regular maintenance of our Rapid Prototyping Machine.
• To liaise with suppliers on the purchasing of all necessary materials used for producing CAD models and other relevant 3D matters.
• To keep proper stock records, manage the sufficient supply and usage of all 3D related consumables.
• To keep a monthly maintenance logbook for the Rapid Prototyping Machine.
• To perform post-processes and provide high QC for 3D printed jobs.
• To maintain, update, and follow through 3D printing SOP to achieve the most optimal output and for the success of the 3D printing results.
• To perform preventive maintenance on the Rapid Prototyping Machine as and when needed to keep the machine always in ‘tip-top’ condition.

Other Responsibilities

• To support relevant sales department to do visuals for corporate project proposal.
• To co-ordinate and perform any tasks assigned by the Design Manager.
• To assist Designers with Design Order Form to relevant factories or suppliers when necessary

Requirements

• Diploma / degree in Fine Arts or related discipline.
• Preferably with 1–2 years of experience in similar capacity.
• Working knowledge of 3D design software packages.
• Ability to work well in a team.
• Meticulous and able to meet tight deadlines

Job Responsibilities

• Develop CAD from rough sketches/Produce drawings, documentations on electrical design
• Interpret and assist with technical proposals
• Assist FAT system at workshop
• Take initiative to resolve all the challenges encountered during the process of project
• Organize, manage and maintain proper documentations including project administrative
• Work with senior designer from inception to completion of project

Requirements

• Nitec/higher Nitec/Diploma in related field
• Fresh graduate who are willing to learn are welcome to apply
• Relevant 2-3 years working experience in the Maritime or similar industry preferred
• Candidates with administrative experience are welcome to apply
• Knowledge in PLC
• Proficiency in AutoCAD
• Good written and communication skills

Other Information

• 5 Days/ Monday to Friday
• Friendly & dynamic working environment

If you possess what it takes, we invite you to submit in a detailed and current resume stating current / expected salary and availability date.

1. Curate suitable social media content to optimize outreach and engagement on relevant platforms.
2. Drive our content marketing strategy across all touchpoints, including website, social media, and email, to enhance engagement and conversions.
3. Create compelling visuals that align with our brand, enhancing both digital and offline presence, improve our content marketing strategy across social channels, focusing on content creation and publishing.
4. Create visual assets to support marketing and branding campaigns.
5. Assist in developing scalable design solutions and templates.
6. Maintain brand standards and guidelines.
7. Actively contribute to the design process and creative production.

The Job

• Develop timing/power/noise characterization flow for advanced node memory compiler.
• Strong focus on design automation for SRAM compiler, big data analysis and design verification.
• Develop memory analysis flow for PPA check.
• Design and develop the layout for integrated circuits according to electronics engineering principles, using software to create design schematics and diagrams.

The Talent

• Bachelor's Degree (with min. 8 years of relevant industry experience) /Masters Degree (with min. 6 years of relevant industry experience)/ PhD in Electrical and Electronic Engineering/Computer Engineering/Computer Science.
• Knowledge of SRAM/ROM memory functionality and high speed, low power memory design architecture.
• Experience in spice simulation and understand CMOS layout view, Verilog coding is preferable.
• Proficient in script programming with Perl or Python3.

Role Description

This is a full-time on-site role for a Design Engineer at Firetec (Singapore) Pte Ltd. The Design Engineer will be responsible for designing and developing new products, creating detailed engineering plans, collaborating with cross-functional teams, and ensuring that the engineering meets quality standards.

Qualifications

• Diploma in Business Administration or relevant field
• Proficiency in CAD software, such as AutoCAD
• Strong knowledge of engineering principles and design techniques
• Familiarity with rules, regulations, best practices and performance standards
• Excellent problem-solving skills,attention to details and meeting deadlines
• Effective communication and teamwork abilities
• Previous experience in the marine or engineering industry is a plus

Employment Type

Full-time

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Job Description & Requirements

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices.

Requirements:

• Possesses at least 7 years of experience in design and construction.
• Minimum Degree in Civil Engineering from accredited Universities.
• Experience in MRT & LTA projects
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.

Well versed in Autocad and BIM software is preferred

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description & Requirements

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices.

Requirements:

• Possesses at least 7 years of experience in design and construction.
• Minimum Degree in Civil Engineering from accredited Universities.
• Experience in MRT & LTA projects
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.

Well versed in Autocad and BIM software is preferred

• We are a chip design service company invested by an international consortium and founded by a senior chip design technical team.
• The company is headquartered in Singapore and will take root in Singapore for long-term development.
• The company has strong R&D capabilities and its core technical team members all have more than 10 years of experience in chip design.
• We have rich industry experience and deep practical accumulation in ASIC design and business management.

Our office is located in one North and walking distance from MRT.

We Provide competitive salary and compensation package for the right candidate. We are work-life balance and friendly to employees with various benefit.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is prefered. ( for excellect junior candidates with 3+ years experience will be considerated )

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.

4. Strong communication ability, good confidence and self-movitation.

5. Bilingual and with good teamwork spirit.

6. Salary is negotiable for excellent candidates.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Good organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Good organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781