Job Responsibilities:

Project Design and Development:

• Lead the design process for civil/structural engineering aspects of deep excavation projects.
• Develop detailed geotechnical design plans, ensuring compliance with relevant codes and regulations.
• Conduct engineering analyses, including stability assessments and structural integrity evaluations.

Technical Leadership:

• Provide technical guidance and mentorship to junior engineers and design teams.
• Review and approve design calculations, drawings, and specifications.
• Troubleshoot and resolve complex design and construction issues.

Stakeholder Collaboration:

• Collaborate with multidisciplinary teams, including architects, contractors, and project managers.
• Liaise with clients, regulatory authorities, and other stakeholders to ensure project requirements and standards are met.

Quality Assurance and Compliance:

• Ensure that designs meet local regulations, safety standards, and best practices.
• Participate in audits, inspections, and peer reviews of design work.

Project Management:

• Manage timelines, budgets, and resources for design deliverables.
• Support the preparation of technical reports and documentation.

Job Requirements:

• Bachelor’s or Master’s degree in Civil/Structural Engineering or a related discipline.
• Recognized professional engineering qualifications by the Professional Engineers Board of Singapore.
• A minimum of 10 years of relevant experience in civil/structural engineering, with at least 5 years focused on designing geotechnical works for deep excavation projects.
• Proven expertise in handling projects of a similar size and complexity.
• Strong knowledge of geotechnical design principles, soil mechanics, and structural analysis.
• Proficiency in relevant design software and tools (e.g., Plaxis, AutoCAD, STAAD.Pro).
• Excellent communication, leadership, and problem-solving skills.

Preferred Qualifications:

• Chartership or equivalent professional accreditation (e.g., PE, CEng).
• Familiarity with Singapore’s construction and regulatory environment.
• Experience with risk assessment and mitigation for geotechnical designs.

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Familiar with AUTOCAD Software.

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.

Responsibility

• Responsible for high-performance block implementation (RTL to GDSII).
• Perform block level floor planning, power grid implementation, APR placement, timing optimization, CTS and routing.
• Close the design to meet timing, power budget and area targets.
• Run physical verification flows (DRC/LVS/EM/IR), and implement fixes to meet the requirements.
• Implement ECO’s to address functional bugs, timing and physical verification violations.
• Responsible for the generation and maintenance of block-level STA constraints and performing STA signoff checks.
• Responsible for timing model generation and supporting the successful integration of blocks into SOC.

Qualification

• At least 3 years of hands-on experience in digital-physical design.
• Bachelor/Master’s degree in Electrical Engineering with an emphasis in IC design
• Experience with digital Physical design and Static Timing Analysis
• Experience in floor planning and routing.
• Experience in advanced process nodes (5nm).
• Good experience with Synopsys implementation tools (DC, ICC2), and experience with Cadence (Innovus) implementation tool is a plus.
• Experience in Mentor Verification tool, Calibre.
• Proficient in TCL coding, Perl/Python knowledge is a plus.
• Good written and communication skills.

• Design and develop machine control software for automated semiconductor equipment.
  • Develop new process control software
  • Integrate software component or OEM equipment into a fully functional software system.
  • Demonstrate solutions by developing documentation, flowcharts and code comments.
  • Produce well organized, optimized, testable and efficient code for software released quality assurance.
  • Develop software solution by studying information needs, conferring with users, studying system flow, data usage and work process, investigating problem areas following the software development life cycle.
• Determine operational feasibility by evaluating analysis, problem definition, requirements, solution development and propose sequencing and coding solutions.
• Improve equipment performance by conducting system analysis, recommending changes in process/procedures.
  • Debug existing source codes and refine feature sets
• Support on-site installation and field service upgrading works.
• Tailor and deploy software tools and processes to resolve customer’s feedback, requirements or issues.

Skills and Qualification

• Minimum Degree in Mechatronics/Computer Science or Engineering.
• At least 4 years’ experience in programming on Windows (XP and above) environment.
• Proficiency with C++, VC++, MFC, SQL and OOP.
• Good knowledge in developing multi-threaded control software, equipment connectivity standard.
• Knowledge in designing GUI and familiarity with SEMI SECS/GEM, C# and WPF programming will be an added advantage.
• Strong analytical, troubleshooting and problem solving skills
• Strong general programming skills, software debugging and execute full lifecycle software development.
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.
• Excellent team player.

Main contractor for LTA project seeking for the above position:-

5.5days work day per week

Junior Engineer (Design Dept).

• Prefer with experience in LTA MRT project
• Responsible and ownership attitude
• Like to work as a team
• Skill in autocad, Microstation will be advantage

Scope Of work:

• Coordination work with design consultant, contractors, clients & authorities
• In charge of planning (Road & Drainage diversion)
• Preparation of method statement and documents submission
• Establish & Maintenance of QA/QC procedure
• Supervison of contractor's / vendor's quality related site work
• Address site issue related to design.
• Manages timely submission & approvals from local authorities
• Manage & produce detailed design inclusive of calculations & drawings production in compliance with Eurocode/ BS code , ACI & ASCE for authority submission.

• Reports to the Design Manager
• Review/Develop design drawings and documents in accordance with project requirements
• Coordinate all design related matters and participate in regular/ad-hoc meetings with Clients / Design consultants / Viaduct specialists / Subcontractor
• Monitor and update design schedule regularly
• Prepare & review shop/fabrication drawings for temporary/viaduct structure
• Support Design manager & lead in-house design engineer/drafter

Job Requirements

• Minimum Degree in Civil Engineering or equivalent
• Minimum 3 years of relevant experience of design & construction of bridge/ viaducts/ roads/ highways
• Candidate with experience in LTA (Road/MRT/Viaduct) is preferred
• Technical expertise and knowledge of concrete material & structure design
• Proficient in proposal for structural systems
• Proficient in AutoCAD
• Proficient in Structural Analysis Software (MIDAS, SAP, STAAD etc.)
• Good attitude towards work and timeline
• Independent, analytical and good interpersonal skills
• Location : Woodlands
• Project : Viaducts

Job Description

• Interface with Design Engineering team for the release of new products (NPI) into Manufacturing
• Involve in product development and evaluate the design for manufacturability and reliability by participating in design reviews and the assembly of the prototype units.
• Drive continuous improvement to minimize Cycle time/Quality issues.
• Perform First Article qualifications for parts and obsolescence components.
• Generate and Maintain process and equipment work instructions, drawings, and other production document to conform to specifications.
• Work with suppliers to resolve component/yield/part problems in a timely manner and assist purchasing teams in driving supplier quality improvements and cost reductions efforts.
• Provide strong technical support to production team to resolve issues and ensure on time shipment.
• Perform detailed Failure analysis on Infant Mortality parts and come up with proposal and concepts to enhance performance.
• Apply 8D troubleshooting, including driving learning and standardization to improve spare part quality.
• Create ECO (Engineering Change Orders), Structuring BOMs and creating test and assembly documentation as needed.
• Provide fly and fix support on field escalations for analysis/resolution on any issue requiring in-depth knowledge on the product.

Job Requirements

• Master’s/bachelor’s degree in mechanical engineering/Mechatronics Engineering with 2 or more years of experience in high-mix-low-volume manufacturing
• Strong mechanical engineering fundamentals, including design principles, machine elements, materials, and fabrication methods.
• Proficient with CAD, ProE/Creo/Solidworks.
• Good Understanding of the Pneumatics, Computers, controls systems and sensors involved in Electromechanical stage/Robot.
• Strong troubleshooting and analytical skills to support technical issues, set-up experiments, and perform data analysis.
• Ability to read and understand Mechanical drawings and use a variety of precision testing and measuring instruments as needed.
• Experience in semiconductor equipment industry /manufacturing is preferred.
• Team player, Self-driven, Willing to learn.
• Expected to travel up to 20% of the time.

Summary :

We are seeking a highly motivated and skilled Senior Hardware Engineer to join our client and play a critical role in the development of innovative electronic systems. In this role, you will drive the complete product lifecycle, from concept to production, ensuring the successful delivery of cutting-edge hardware solutions.

Responsibilities:

• Product Definition & Design:Translate product requirements into detailed technical specifications and system architectures.
  Develop and maintain comprehensive design documentation, including schematics, layouts, Gerber files, and verification reports.
  
• Technical Leadership & Collaboration:Lead and manage the hardware design process, collaborating effectively with in-house design teams, ODMs, and OEM suppliers.
  Proactively identify and mitigate technical risks, ensuring timely and effective resolution of design challenges.
  Foster strong communication and collaboration with cross-functional teams (software, mechanical, manufacturing) and stakeholders.
  
• Quality & Compliance:Ensure compliance with all relevant electrical safety and regulatory standards (e.g., EMC, safety).
  Optimize designs for thermal performance and power efficiency.
  
• Project Management:Manage all development projects in accordance with company processes and timelines.
  Track project progress, identify and resolve roadblocks, and ensure timely delivery of milestones.
  

Qualifications:

• Bachelor's degree in Electrical Engineering or a closely related field.
• Minimum 5 years of professional experience in hardware design.
• Strong foundation in digital and analog electronics, including:Microprocessor systems (e.g., ARM, x86)
  Memory systems (DDR, NAND, SRAM)
  Communication interfaces (USB, Ethernet, I2C, SPI, RS-485)
  Power electronics and thermal management
  High-speed digital design and signal integrity
  
• Proficiency in PCB design tools (e.g., Altium Designer, OrCAD)
• Experience with embedded systems design and development.
• Excellent problem-solving, analytical, and troubleshooting skills.
• Strong communication, interpersonal, and teamwork skills.

Preferred Qualifications:

• Experience with firmware development (bootloaders, BSPs).
• Knowledge of FPGA/CPLD design and implementation.
• Experience with design for manufacturability (DFM) and design for test (DFT).
• Experience with 3D modeling and mechanical design considerations.

Applicants who possess relevant experience are welcome to apply. Interested candidates kindly click the APPLY NOW button.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

EnviroDynamics Solutions Pte Ltd

Reg. No: R1324803

EA License No.: 12C6285

Piping Design Engineer

Working Days: 5 days’ work week

Working Hours: 8:15 am–6 pm (Mon-Fri)

Office Location: Joo Koon

Salary Range: $2500 - $3500

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Our client is a leader in semiconductor manufacturing equipments, providing designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking requirements. They are hiring for Senior Mechanical Design Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Senior Mechanical Design Engineer

Responsibilities:

Design and develop series of marking/inspection/ sorting/customised semiconductor equipment to meet the processing and automation needs of customers. Main duties involve

• Design standardization
• Costing and project management
• Machine and module conceptualization design
• Design for manufacturing (DFM), design for assembly (DFA) and Concurrent engineering
• Pneumatic/ hydraulic circuit design
• Detail fabrication drawings, assembly drawings and layout drawings
• Selection and sizing of standard components available off the shelf
• Undertake new product development or be involved in sustaining engineering/CIPs

Requirements:

• Bachelor/ Master of Engineering with minimum 5 years relevant experience
• 3D solid Modeling, preferably Pro-E (others like Solid Edge, Auto Inventor, Mechanical Desktop, Solid Designer are also acceptable).
• Strong project management skills
• Good track record in:

1. Ultra High Precision machine design
2. High Speed Pick and Place mechanism design
3. Structural, kinematics and dynamic analysis and FEA simulation
4. Geometrical tolerance and dimensional analysis (e.g. stack up error)
5. Engineering material selection
6. Design troubleshooting
7. Application of analysis tools like FMEA, DOE

• Analysis of project requirements and propose the solutions accordingly.

• Development of system technical specifications.

• Development of system architectures and integration with 3rd parties' systems.

• Technical interface with customers and other contractors.

• Realization of testing and commissioning works onsite.

• Network troubleshooting for wired and wireless systems both.

• Technical support to systems once into operation after commissioning.

• Onsite testing and commissioning.

Requirements:

•Tertiary qualification in Electrical and Electronics Engineering

•Minimum 6 years experience working on various communication systems technologies such as fibre-optic transmissions, digital trunked radio, public address and telephony, CCTV surveillance, access management and travel information systems.

•Experience in implementing railway-related projects.

Job Description:

• Able to assist in Costing
• Proficient in Autocad sanitary plumbing
• Candidate is proficient in Building Information Modeling (BIM)
• Knowledge in AUTOCAD (2D & 3D) & BIM drawing
• Plan, manage and execute design work, typically from concept through to completion and manage design changes during construction stages
• Plan all drawing request to meet the submission deadline
• On time delivery drawings, correct and accurate drawings
• Work closely with assigned PM on Autocad and Drawing Status reporting
• To attend site walk as and when required by the Engineers and Managers
• Ensure compliance with the relevant design codes and specifications

Requirements:

• Minimum 2-3 years relevant experience
• Positive working attitude, self-motivated and responsible
• Able to start work immediately
• Fresh graduates from ITE or Polytechnic are welcome to apply

Design Verification Engineer

Experience : 6+ Years

Salary Range :SGD 7000-10000

Skills Required:

FPGA SoC Verification Skills

ASIC SoC Verification Skills

System Verilog and UVM Skills

Automation Skills .

IP Verification Skills

Low power UPF based verification skills

Technical Expertise

Languages :Verilog, System Verilog, C, C++.

Verification Methodologies:UVM, OVM.

Scripting Languages:Perl,C-shell.

Simulators:Cadence IUS, Synopsys VCS, Verdi.

Protocols:PCIe,AGPT,CFDM,SPI,ISO7816,

DDR3, LPDDR2, GPIO, AXI, AHB, APB, JTAG, WDT, GPT.

- Designing electrical system

- Ensure designs meet industry standards and regulations

- Knowledge of design techniques

- Prepare technical documentation and reports

- Responsible for producing schematic drawings

- Proficiency in electrical design software (e.g., AutoCAD, Solidwork)

- Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.

- Assist and collaborate with other project team members to comply with project requirements and meet project schedules

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Responsible for planning and monitoring schedule for all projects.

Work closely with drafters and peform quality check of all drawings before production on site.

Prepare precast profile drawing to comply the authorities requirment and standards.

Liaise with Project teams, auhorities, client, architects and various contractors to ensure project work is carried out smoothly Conduct site inspection and coordination on site

Requires hands on design with detailed experience in 3-D environment, Experience in structural detailing seamless from 3-D mathematical design analysis to 3-D reinforcement detailing with the aid of Telka TSD and TS models etc.

Keen in 3-D modelling designs by using Tekla software.

• Attend User / Client meetings acting as technical lead in regard to project management as required.
• Conduct internal training to staff for pre-sales engagement and ensure knowledge transfer of design methodology, cost modelling, etc. to employees.
• Manage each phase of the project from design to completion and ensure efficient use of resources and enhance cost-effectiveness.
• Supporting new business venture overseas
• Propose design concept.
• Summarize design requirement.
• Analyzing existing facility
• Conceptual sizing/design
• Risk analysis by checking consistency between tender and quotation specification.
• Prepare supplemental material (Spec, DWG) for quotation.
• Review BoQ (Material and quantity)
• Propose Value Engineering and technical review.
• Prepare presentation material for tender interview.
• Provide audit and consultancy services.
• Vigilant system support (for Mechanical Engineer)
• Site survey
• Draft proposal document
• Provide technical support.
• Provide CFD simulation report (for Mechanical Engineer)
• Project Management for new construction and D&B project in design phase working directly with clients, consultants, statutory authorities, and contractors.
• Leading or facilitating the design review meetings and design workshops.
• Feasibility study
• Assessment of mission critical building
• Concept & schematic design
• Summarize design requirement.
• Analyzing existing facility
• Schematic design report
• Design development (Spec., technical calculation sheet)
• Propose new, feasible innovation and stay abreast on the latest trend in the market.
• Product differentiation
• Detail design
• Arrangement of shop drawing with drafter
• Authority submission arrangement with QP
• Input for T&C requirement (prepare test script and ensure that the methodology is in line internally)
• Design Coordination with other discipline.
• Review of construction material / shop drawing / MoS
• Shop drawing coordination with sub-con/vendor & other stakeholders.
• Periodical inspection (internal check for quality improvement)
• Ensure site installation works are accordingly to project plans / designs / time frame.
• T&C consultation for FAT, SAT, and IST with Technical & Q&C department
• Handover submission arrangement with drafter team and project team (As build DWG)
• Required to learn and adopt working in Cloud, Design Collaboration and Model coordination and QA/QC own work.
• AutoCAD & Revit experience with Cloud Work-sharing (ACC) is desirable.
• Depending on project need, this position may be located On-Site or Off-Site and requires frequent travel to the project site.
• Any other duties assigned by Senior Manager

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Are you a Mechanical Engineer with expertise seeking to make a valuable contribution to the success of a product?

Super Tomato is a company that offers a comprehensive range of automation services, including design, fabrication, and assembly, for our corporate clients. Our expertise lies in automation and robotics.

We are currently looking for a motivated and competent Mechanical Engineer to design our upcoming product.

As a Mechanical Design Engineer at Super Tomato, you will play a crucial role in designing our next product. You will be responsible for every stage of the process, from ideation and prototyping to design validation, manufacturing, and reliability testing.

Your task will be to solve a given problem statement and conduct research to 3D print, test, and eventually bring it for fabrication and final assembly.

Your experience with mechanisms will be critical as it is required in significant part of our projects.

This product will have a significant impact on the public, as it will be deployed in high-traffic areas. You will be able to build a robust portfolio and showcase your skills.

If you are shortlisted, we will invite you to our office for a physical viewing of the product.

Responsibilities

• Hands-on assembly
• Designing products from scratch
• Sizing of components
• Communicating effectively with the vendor
• Conduct thorough testing of designs
• Cost-down

Qualifications

Having prior experience in designing mechanisms is highly desirable for this position. In addition, if you possess experience working with systems that are involved in food handling, that would be a great advantage.

Responsibilities:

• Lead in Mechanical and Engineering Design for Process Development or Product Design or Engineering solutions
• Create proof of concepts
• Generate engineering drawing with proper GD&T and Tolerance Stack up
• Define test requirements needed for all the designed products
• Perform Patent search for possible design infringement
• Drive Projects with tight timeline
• Any other duties as and when assigned
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Bachelor’s degree in mechanical / industrial engineering with 2-3 years of relevant experience
• Good exposure in Plastic Injection molding parts design
• Knowledge of product design, engineering plastics behaviour, product certification
• Knowledge of CAE simulation will be an added advantage
• Competent in Engineering calculations
• Hands on 3D CAD & CAE experience
• Good problem-solving skills with strong technical acumen

Interested candidates may send their CV to Caris (Reg No. R1109826) at [email protected] quoting the job title in the Subject line. We regret that only shortlisted candidates will be notified.

• Reports to the Design Manager
• Review/Develop design drawings and documents in accordance with project requirements
• Coordinate all design related matters and participate in regular/ad-hoc meetings with Clients / Design consultants / Viaduct specialists / Subcontractor
• Monitor and update design schedule regularly
• Prepare & review shop/fabrication drawings for temporary/viaduct structure
• Support Design manager & lead in-house design engineer/drafter

Job Requirements

• Minimum Degree in Civil Engineering or equivalent
• Minimum 3 years of relevant experience of design & construction of bridge/ viaducts/ roads/ highways
• Candidate with experience in LTA (Road/MRT/Viaduct) is preferred
• Technical expertise and knowledge of concrete material & structure design
• Proficient in proposal for structural systems
• Proficient in AutoCAD
• Proficient in Structural Analysis Software (MIDAS, SAP, STAAD etc.)
• Good attitude towards work and timeline
• Independent, analytical and good interpersonal skills
• Location : Woodlands
• Project : Viaducts

THE PERSON:

The ideal candidate should have a deep understanding of analog design and able to lead, attend and present at design review meetings with teams worldwide.

KEY RESPONSIBILITIES:

• Circuit design of wireline transceiver building blocks (PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer, etc.)
• Conduct peer reviews of circuit design and verification results
• Working with validation team to evaluate silicon results

PREFERRED EXPERIENCE:

• Extensive experience with high speed analog design with blocks like ADC, PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer.
• Experience with latest process technologies like 7nm or below Finfet technology.

ACADEMIC CREDENTIALS:

• Bachelors/Masters/Phd Degree in Electronic Engineering

LOCATION:

Singapore

• World-Class consultancy firm
• Design project experience

RESPONSIBILITIES:

• Responsible for Electrical Engineering services for the projects from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as mentor to new employees and provide technical assistance
• Advise engineers on the project administration and contractual issues
• Conduct technical discussion on common design problems
• Assist in maintaining high quality standards of design and construction
• To promote esprit de corps amongst employees
• Responsible to participate and support the Company’s SHEQ within their scope of duties

REQUIREMENTS

• Bachelor’s Degree in Mechanical or Electrical Engineering.
• Accumulated around 6 years of experience handling M&E Engineering ideally in semiconductor or construction projects

OTHER INFORMATION:

• Location: depending on Project
• Working hours: 5.5 Days
• Salary: To be Discussed based on experience (Salary will commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

How To Apply:

This position is an excellent opportunity for a dynamic individual. It comes with stimulating challenges that will mould your capabilities and reveal your potential.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: (R1875905), Achieve Career Consultant Pte Ltd EA Licence No. 05C3451) (BEP) by clicking the ‘Apply link’ /

or call your friendly Consultant, David, at 9271 7510 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We would like to inform that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at https://www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Responsibilities:

• Develop printed circuit board designs which satisfies the customer's requirements and follow customer’s established DFX guidelines

• Generate all data required for the fabrication, assembly, and test of printed circuit boards to aid in the downstream processes

• Library creation and schematic drafting in PADS

• Work from components placement to Gerber generation in PADS

• Design high dense PCBs for power supplies and microcontroller circuits

• Follow safety spacing and constraints for international standards like IEC60950, IPC9592B, etc.

• Generation of BOM, assembly drawings and fabrication drawings

• Gerber review using CAM350

• Work as a team with electrical and mechanical engineers

Requirements

• Diploma/Degree in Electrical & Electronics Engineering

• 3 to 5 years of experience in PCB design

• Minimum 5 years of PCB Design Experience for senior position

• Full-fledged experience in PADS Layout, PADS logic and CAM350

• Experience in single and multilayer PCBs up to 6 layers

• Working experience in SMPS is an added advantage

• Able to work independently and as a team

• Dynamic and excellent interpersonal skills