Company Overview

Ambiq's mission is to develop the lowest-power semiconductor solutions to enable intelligent devices everywhere by developing the lowest-power semiconductor solutions to drive a more energy-efficient, sustainable, and data-driven world. Ambiq has helped leading manufacturers worldwide develop products that last weeks on a single charge (rather than days) while delivering a maximum feature set in compact industrial designs. Ambiq's goal is to take Artificial Intelligence (AI) where it has never gone before in mobile and portable devices, using Ambiq's advanced ultra-low power system on chip (SoC) solutions. Ambiq has shipped more than 230 million units as of October 2023. For more information, visit www.ambiq.com.

Our innovative and fast-moving teams of research, development, production, marketing, sales, and operations are spread across several continents, including the US (Austin and San Jose), Taiwan (Hsinchu), China (Shenzhen and Shanghai), Japan (Tokyo), and Singapore. We value continued technology innovation, fanatical attention to customer needs, collaborative decision-making, and enthusiasm for energy efficiency. We embrace candidates who also share these same values. The successful candidate must be self-motivated, creative, and comfortable learning and driving exciting new technologies. We encourage and nurture an environment for growth and opportunities to work on complex, engaging, and challenging projects that will create a lasting impact. Join us on our quest for 100 billion devices. The endpoint intelligence revolution starts here.

Responsibilities

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

Specific responsibilities include:

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.
• Develop test plans at block, sub-system, and chip level.
• Execute SoC-based verification at full-chip.
• Write C-based lib packages and tests.
• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.
• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.
• Automating the test environment for randomized testing and scoreboarding.
• Utilize advanced debugging techniques to identify and resolve design and verification issues.
• Perform root-cause analysis and work with design teams to fix identified issues
• Define and track functional and code coverage metrics to ensure thorough verification.
• Ensure that verification quality meets or exceeds industry standards and project requirements.
• Edge-based AI inference is preferred.

Requirements

What you need to have to be successful

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification
• Should have delivered multiple chips functioning to Specification.
• Identify and manage verification deliverables, milestones, and schedules.
• Proactively identify potential verification risks and develop mitigation strategies.
• Collaborate with design, architecture, and software teams to understand and verify design intent.
• Communicate verification progress, issues, and results to stakeholders and management.
• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges
• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.
• C-based verification in an SoC environment is required
• Experience with ARM processor-based designs and low-power design techniques is a plus.
• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile
• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5
• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Responsibilities

• Develop and design mechanical systems and components for machine automation projects.
• Utilize CAD software to create 3D models, assemblies, and detailed drawings.
• Work with the team to ensure designs meet project requirements and standards.
• Assist on various projects consisting of the design, fabrication, and modification of components.
• Coordinate with fabrication house and component suppliers.
• Assist in assembling, installing, and completing the design work in which you were involved.
• Involve in design reviews, troubleshooting, and continuous improvement efforts.
• Perform all given tasks within given time.
• Be committed and responsible.
• Any other duties as assigned.

Requirements / Qualifications

• Diploma / Degree in Mechanical/Mechatronics Engineering or relevant technical discipline.
• Fresh graduates are welcome to apply (Must be willing to learn).
• Candidates with automation background only.
• Proficient in designing and drafting using 3D CAD software.
• Proficient with Microsoft Office.
• Good communication skills.
• Able to start immediately.

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

JOB DESCRIPTION

· Discussion with system engineers on SoC architecture and feedback on optimization.

· Work on SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Discussion with synthesis engineer and back-end engineer on design optimization.

· SoC DFT support;

· SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Knowledge of ASIC design flow

· Experience in RTL coding, RTL and gate-level debug

· Understanding of DFT, timing and power requirements

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Knowledge on mixed-signal design would be an advantage.

JOB DESCRIPTION

· Discussion with system engineers on IP requirement and micro architecture.

· Develop IP (control path intensive or data path intensive) meet functional requirement and protocol standard.

· Support SoC designer on integration, timing constraints and power domain setting.

· Support IP verification for verification plan review, test case debugging.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience in IP development (either control path intensive or data path intensive)

· Knowledge of timing, DFT and power structure.

· Familiar with UNIX/ Linux environment and scripting

· Experience on communication IP and/or video IP development would be advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Experience on communication IP development would be an advantage

· Experience on video IP development would be an advantage

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

- Location: Bedok

- 5days work

- Basic + AWS + VB

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.

Requirement:

• Diploma/ Degree in Electrical/ Electronics Engineering or related discipline
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

JOB DESCRIPTION

· Work with system engineers on timing requirements and feedback on optimization.

· Work on SoC timing constraint, synthesis and timing closure.

· Work on power structure, eg. Isolation of power domains, level-shifter crossing voltage domains

· Conduct formal verification for release comparison.

· Support back-end implementation on timing violation analysis and fix.

· Support scan insertion and optimization.

· Support on power structure and power optimization.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Familiar with ASIC design flow

· Experience in logic synthesis, static timing analysis, timing closure

· Good understanding of DFT and Power structure.

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

about the company

My client is a leading manufacturer of digital electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career

about the job

• Design and realization of the chip floorplan, clock architecture and powerplan
• In charge of physical design tasks from netlist to GDSII (P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout)
• Lead analog designs during product development
• Physical design methodology of advanced process nodes and builds an automatic physical design platform

skills & experience required

• PhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics Engineering
• Min 4 years of hands on / research experience with digital backend ICs circuit design / physical design
• Well versed with synthesis, place & route, STA and design convergence
• Willing to work in a new start up entity in Singapore
• Proficient in tapeout experience at advanced technology will be a plus
• TCL,Perl,Python script development and familiar with EDA tool design

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• Kaki Bukit (East)

Your Responsibilities: -

• Generate mechanical drawings
• Coordinate with customers about requirements and feedbacks
• Ensure drawings are in correct specification and requirements
• Follow-up of assembly and installation work

You will need: -

• No experience required, traning provided

Apply now or email to [email protected]

Good luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 Recruit Lync Pte Ltd 22C1000

Job Descriptions:

1. Participate in high-level product specifications, microarchitecture and implementation of high-speed memory interfaces

2. Responsible for delivery of AMS circuits in SerDes, including the evaluation of different circuit topologies

3. Worked on high-speed serial and parallel interface design, defining specifications and implementing modules such as bandgap, bias circuits, LDO regulators, amplifiers, comparators, switched capacitor circuits, ADCs, DACs, oscillators, filters, Tx/Rx equalization techniques and circuits such as de emphasis, CTLE, DFE, CDR architecture and implementation, high-speed digital circuits (serializers, deserializers, counters, dividers, etc.)

4. Work with the verification team for lab debugging

5. Work with the software team and/or customers to solve problems, debug and tune system performance

Job Requirements:

1. Bachelor's degree in communications, electronic engineering or computer engineering, master’s degree preferred

2. More than 4 years (senior engineer) and 6 years (staff engineer) of ASIC design experience, familiar with ASIC development process

3. Good AMS circuit design skills and EDA tools such as Cadence Virtuoso, Calibre, Hspice/Spectre, and static timing analysis tools (e.g., Nanotime)

4. Familiarity with high-speed interfaces such as DDR, SerDes, PCIe is preferred

5. Ability to solve customer problems and deliver results in a timely manner

6. Strong organizational and communication skills where English is a must and Chinese is preferred

HOW TO APPLY:

Interested applicants, kindly send your resume to [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Mason & Co is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Mason & Co Pte Ltd

EA License No: 19C9622

EA Personnel: Cheah Wei Xuan (Thea)

EA Personnel Reg No: R23118878

Civil Engineer (Steel/Facade/Architectural Finishes Design)

Responsibilities:

• Responsible for the execution of civil and structural design involving the preparation of calculations, drawings and detailing.
• Coordinate with client and consultant for steel structure detailed design, shop drawing, authority submission and installation schedule.
• Support the team to design for steel structure support system.
• Involve in project planning, implementation and close monitoring of projects
• Project coordination including submission to local authorities and liaison during the construction stage.
• Any other task as designated by the management

Requirements:

• Relevant Degree recognized by Professional Engineers Board (PEB)
• Min 4 years of working experience in construction & structural steel industry
• Able to understand and prepare cutting plan, structure design and outfitting.
• Ability to work independently in a fast-paced environment.
• Effective communication and good interpersonal skills.

Interested applicants please submit your resume to [email protected]

• SGD 4,000 – SGD 8,000 + Variable bonuses
• Consultancy handles projects in government agencies, industrial, commercial & residential granting a competitive advantage
• Excellent career progression + Equal opportunities for advancement
• Attractive employee welfare benefit
• Location: Bugis area | Mon – Fri

Responsibilities

• Undertake design development and detailed designs.
• Attend site/ project meetings with clients, consultants and contractors.
• Familiar with engineering software and the latest code of practice.
• Senior hire would require to plan, coordinate, manages and supervises the civil & structural project.

Requirements:

• Degree in Civil/Structural Engineering from a recognized Institution;
• Working experience in a Civil & Structural consultancy firm.

Applicants are encouraged to include the following in their resume:

1. Expected salary
2. Notice period
3. Past project details – what kind of construction/building, etc

We regret to inform that only shortlisted candidate will be contacted.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities:

· Design and coordinate assigned Civil and Structural projects

· Perform structural analysis and design in building or on any structures as required by the project

· Liaise with clients & consultants to meet C&S requirements.

· Coordinate to ensure civil and structural requirements meet project tender, submission and construction schedule

Requirements:

· Good degree in Civil and Structural Engineering from a recognized University

· Minimum 1-2 year working experience in Civil & Structural consultancy firm

· Conversant with structural programs such as STAAD, TEKLA, ETABS, RAPT would be advantages

· Ability to work independently

· Candidate without the relevant working experience but with good academic results may be considered

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is a well-established construction, property development and specialist engineering solutions provider. Currently, they are currently seeking for Design Manager to be part of the team.

The ideal candidate is a highly experienced and skilled Design Manager with minimum of 15 years of civil engineering or architecture experience post-tertiary education and hold professional status. The candidate should have a proven track record of managing design teams on projects for large scale of Design & Build nature of industrial or treatment process plant. The Design Manager must be well-versed with regulatory agencies’ requirements and standards.

JOB DIMENSION (SCOPE)

• Lead and manage design consultant teams to deliver high-quality design solutions on time and within budget.
• Oversee the entire design process, from concept through to detailed design and construction documentation.
• Ensure designs meet project specifications, regulatory requirements, and client expectations.
• Coordinate with multidisciplinary teams, including architects, engineers, and consultants.
• Foster a collaborative and productive team environment.
• Provide mentorship and guidance to junior designers and engineers.
• Act as the primary point of contact for clients and stakeholders on design-related matters.
• Conduct regular meetings and presentations to update clients on project progress and address any concerns.
• Ensure client requirements are accurately captured and reflected in the design.
• Implement and enforce quality control procedures to ensure the highest standards of design.
• Review and approve design documents, drawings, and specifications.
• Conduct regular design audits and peer reviews to maintain quality and consistency.
• Ensure all designs comply with relevant regulatory requirements and standards.
• Liaise with regulatory agencies to obtain necessary approvals and permits.
• Stay updated on changes in regulations and standards and ensure designs are adapted accordingly.
• Provide technical leadership and expertise in civil engineering or architecture.
• Resolve complex design challenges and technical issues.
• Stay informed about the latest industry trends, technologies, and best practices.

JOB REQUIREMENTS

• Bachelor Degree in Civil Engineering, Architecture, or a related field.
• Master’s degree is preferred.
• Minimum of 15 years of relevant experience in civil engineering or architecture.
• Proven experience in managing design teams on complex projects.
• Experience in the design of multi-storey bus depots or similar structures is preferred.
• Professional Engineer (PE) or Registered Architect (RA) status.
• Strong leadership and team management skills.
• Excellent communication and interpersonal skills.
• Proficiency in design software and tools (e.g., AutoCAD, Revit, BIM).
• In-depth knowledge of regulatory requirements and standards.
• Strong problem-solving and decision-making abilities.

COMPANY DESCRIPTION

Headquartered in Singapore, The EtonHouse International Education Group has 120 schools across 11 countries. We run pre-schools as well as K-12 international schools. Together, these schools provide internationally recognized programmes and high-quality education to over 20,000 students globally. The group also runs enrichment programmes and cutting-edge ed-tech programmes to scale the provision of high-quality education in pre-schools.

Over the last 27 years, EtonHouse has been at the forefront of international education in the Asia Pacific region and has won numerous awards. In 2019, our founder, Mrs. Ng Gim Choo won the EY Entrepreneur Of The Year Award in the Education category. In addition, EtonHouse was recently selected to be in the inaugural cohort of the Scale-Up SG programme, which is an Enterprise Singapore programme selecting high-growth potential local companies which can be groomed into future global champions.

With children at the heart of what we do and the vision to make good quality education accessible to every child in Singapore, EtonHouse launched the EtonHouse Community Fund (ECF) in 2015. As an independent IPC charity, ECF continuously runs initiatives to make a difference in the lives of vulnerable children.

EtonHouse Vision

Shaping the future through education

EtonHouse Mission

Developing confident and capable global citizens

Be a part of the EtonHouse family

We welcome passionate and dedicated professionals who share our belief in the power of education. Together, we can make a meaningful difference to children and society through education.

RESPONSIBILITIES

This is an exciting opportunity for an experienced Design & Technology teacher to join a growing, boutique school in the heart of Singapore. The successful applicant will be expected to teach Design & Technology from ages 9-16, Upper Primary to IGCSE. The school offers IGCSE Design & Technology so experience in this area would be an advantage. They will have outstanding subject knowledge and have the ability to enthuse and inspire students, maximising achievement and progress at all levels. A teacher with flexibility, resilience, and a caring and kind approach towards students. A learner with a drive to develop creative new approaches to student learning within a collaborative environment.

KEY RESPONSIBILITIES

• Deliver the Design & Technology curriculum to assigned classes in accordance with the school's timetable.
• Differentiate lessons according to the abilities and learning needs of individual students.
• Promote independent learning by adopting teaching and learning strategies which develop the competence and confidence of every student.
• Ensure the thorough implementation of subject specifications, teaching schemes, assessment policies and reporting procedures.
• Assess and develop the Design & Technology curriculum in the school
• Plan and deliver schemes of work, including the choice of appropriate teaching and learning methods to meet the needs of the subject, and of different students.
• Keep abreast of current developments in Design & Technology education and to adapt the curriculum content and methods of teaching and examining as appropriate.
• Identifying appropriate resources within the limits of the school budget.
• Ensure health and safety policies are followed within the Design & Technology workshop.
• Ensure that the Design & Technology workshop presents a stimulating environment, which help to influence students' attitudes positively towards the subject.
• Ensure students' work is regularly assessed and that homework is in line with school policy.
• Report to parents in accordance with the school's reporting policy.
• Use information gained from assessment, recording and reporting procedures to generate further improvement in student achievement.
• When required, take on a form tutor role in the Senior School and fulfill the responsibilities of that position.
• Follow the School's policies and procedures with regard to discipline and behaviour, daily routines, duties, homework, leave of absence and visits.
• Contribute to co-curricular activities that broaden students' experiences and contribute to the general life of the school.
• Promote the study of Design & Technology amongst students and parents.
• Attend and contribute to meetings of a professional nature.
• Maintain appropriate links with teaching colleagues in all sections of the school and foster cross-curricular links where appropriate.
• Liaise with members of the Inclusive Education Team with regard to individual students, to ensure that those needs are understood, planned for and met.
• Develop effective links with the wider community, in order to extend the study of Design & Technology and enhance teaching and learning.

• At least 2 5 years relevant professional teaching experience in education;
• The candidate should hold a minimum of a Bachelor Degree in Design and Techonlogy or Education or equivalent, which is obtained from a recognised University or College involving not less than 3 years full time study;
• Teachers Certificates, Diplomas or other Teacher Accreditation courses and certification are required if the applicant's degree is not in Education;
• IB PYP course and training are highly valued;
• Knowledge of or willingness to acquire knowledge of inquiry based learning is required;
• Applicants must provide original copies of their Certificates and academic transcripts for authentication;
• International experience, especially in Asia is highly regarded.

Job Description

• Manage and follow up with clients assigned.
• Discuss and propose professional advice on interior design, space planning, design conceptualization, and material selection to prospective clients.
• Graduates in interior design or related fields are welcome.
• Work closely with subcontractors and suppliers to ensure the project works smoothly.

Job Requirement:

• Customer-oriented with excellent communication skills.
• Proficient in AutoCAD, SketchUp and Photoshop is advantageous.
• Collaborate with the Visualization team to produce 3D design drawings.
• Ability to communicate thoughts & ideas effectively.
• Able to Multi-task and meet tight schedule.
• Positive Attitude, Sales-driven and Highly Self Motivated.
• Team player, Goal driven & Great work ethics.
• Candidates that can communicate Mandarin in order to liase with Mandarin speaking clients and Subcontractors.

Why join us?

• Fast track career advancement for achievers.
• Flexi working environment.
• Career progression opportunities.
• Excellent learning environment with the freedom to be creative.