The Job Responsibilities:

- Responsible for performing outdoor & indoor repair, maintenance and troubleshooting work

- Where there is no outdoor repair, you are required to work within the Company workshop

What It Takes:

· Degree/ Diploma/ Certificate in electrical & electronic engineering (AC & DC motors, single-phase & three-phase, lead acid & lithium batteries, electrical control circuits, hydraulic system)

· minimum a year of customer support experience

· ability to work as part of a team and possess strong communication skills

· obtained local driving license is a plus

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 24 months
• Start from: End January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of factory OR commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Join our R&D team within Chemtech division in Singapore as Electrical and Instrumentation Technician/Engineer.

Your main tasks and responsibilities:

• The job holder is responsible for the execution of preventive maintenance, troubleshooting, repairs, and maintenance of all pilot plant facility as well as maintaining the calibration program of all instruments.
• Develop electrical and instrumentation systems tailored for ATEX or IEC classified environments. This includes designing control panels, crafting intricate wiring diagrams, and meticulously mapping out instrumentation layouts.
• Oversee the installation, commissioning, and maintenance of electrical and instrumentation systems. Troubleshoot and resolve electrical and instrumentation issues to minimize downtime and ensure safety. Conduct routine inspections and preventive maintenance on electrical and instrumentation equipment.
• Ensure all electrical and instrumentation systems adhere to relevant safety standards and regulations. Participate in safety assessments and develop strategies to mitigate risks associated with electrical and instrumentation systems.
• Maintain accurate documentation of electrical and instrumentation designs, configurations, and maintenance records. Prepare technical reports, drawings, and documentation for internal and external stakeholders.
• Identify opportunities for process optimization and efficiency improvement in electrical and instrumentation systems. Stay updated on industry trends and emerging technologies to recommend upgrades and improvements.

To succeed in this role, you will need:

• Diploma or Degree in Electrical Engineering with relevant experiences in pharmaceutical, chemical or petrochemical industries.
• >7 years for Diploma or 3-5 years for Degree experience in pharmaceutical, petrochemical or flavor and fragrance environment.
• •Hands-on experience in ATEX or IEC environment, preventive maintenance, troubleshooting, repairs, maintenance of automation and equipment, as well as maintaining the calibration program of all instruments.
• Ability to conceptualize and provide design for electrical, instrument and control wiring diagrams.
• Requires skills in analyzing malfunctions in control systems and making appropriate repairs. This includes troubleshooting PLCs, field sensors, control wiring, general I/O wiring, & networks/communications wiring.
• Requires skill in the use of technicians' tools such as electric meters, oscilloscopes, calibration devices, electronic testers, etc.
• Awareness for safe handling of chemicals, potentially dangerous materials and equipment.
• Proficiency in AutoCAD or other relevant design software.

Location: We are based in Cleantech 3 (This role is for our new R&D Test Centre)

Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable

Responsbilities

• Plan and design mechanical engineering works for building services, with a focus on ACMV systems.
• Develop detailed reports, specifications, calculations, drawings, and project documentation.
• Present designs to stakeholders, review shop drawings, and manage material/equipment submissions.
• Handle RFIs and perform contract administration tasks effectively.
• Oversee installation, testing, and commissioning of mechanical systems to ensure compliance with design and quality standards.

Requirements:

• Degree in Mechanical Engineering or equivalent.
• Minimum 7 year of relevant experience in mechanical engineering design. More than 10 year experience will consider for Principal Engineer role.
• Strong knowledge of mechanical engineering design systems and software.
• ACMV expertise is mandatory.
• Candidates with experience in handling government projects will have a strong advantage.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

Work Location: 6 Tampines Industrial Avenue 5 Singapore 528760
Work Day : Monday - Friday, 8.30am - 5.30pm

Responsibilities:

• To lead a team of Engineers to carry out all the Test related activities for Server & Rack products for the production
• To support & implement PXE Server configuration for the products
• Perform & maintain the Server & Rack run-in test process
• Perform & maintain the burn-in & power test process
• To liaise with customer & HQ / factory on the test program implementation and maintenance
• To test and analyze all failures in the production products and work back with customer & HQ / factory for improvement
• Participate in the Kaizen activities
• To update the test program master list & tracking
• To prepare and update Working Instruction
• To provide training over W/I to production
• To support the NPI Process
• To support production on the mass run
• Participate in ISO activities (implementation & maintenance)

Requirements:-

• Min. Diploma in Engineering discipline with min 3 years relevant experience in Server / Rack/ Manufacturing environment
• Ability to work with the customer, HQ / factory, Peers / Subordinate and Superiors
• SAP & Linux knowledge
• Able to multi-task & work under pressure
• Good understanding of test methods and concepts
• Knowledge of programming and debugging skills

Compliance with RBA standards

Job Description:

· Produce mood, material & design presentations for internal & consultant meetings.

· Work independently from conceptual design, design development & space planning.

· Produce schematic design (Draft sketches, technical drawings on AutoCad, 3D views on SketchUp),

· Work with project managers during installation works to ensure that output matches with design.

Requirements:

· Degree of related fields preferred (Diploma holders with experience may apply).

· Requires communication with peers & fellow craftsmen.

· Candidates expected to be highly driven, responsible and self-motivated.

· Minimal 3 to 5 years' of work experience, preferably with experience in sales client facing function.

(Renumeration with CPF, will vary based on experience and portfolio)

• Ability to cut and lay tiles following tiles setting out plan. drawings able ties seting pid and read layout plans, and stiles in dify withorserlevel, consistent grouting
• Screeding of tiles base with trowels using waterproofing
• Cut tiles and shape them properly to ensure they fit around obstacles and in tight corners using power and hand tools
• Form tile beds using concrete, plaster, mastic, cement, glue or mortar utilizing tools such as screeds, brushes and trowels
• Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise
• Cut, install, polish and surface granite and marble and ensure accuracy during the installation process
• Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly
• Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms · Tap tiles into place carefully using tools to properly adhere tiles to the base
• Follow blueprints precisely and mark and measure surfaces that need to be tiled.

At Aeon Earth, people are our greatest asset! We take pride in doing what’s right for our customers, and our employees. We empower them to be their best and do their best work.

The company offers work in the office. We are only able to accept applications for those based in Singapore and have sponsorship to live and work in Singapore.

What is this role?

The Systems Engineer will provide technical support and services related to installation, troubleshooting and integration of Jamf products and support technologies including products from Apple, Cambrionix, Goodnotes and more.

Your efforts will lead directly to the sales of our products and services, development of pipeline growth and sales across both new logos and current customers.

As a member of the Aeon Earth family, you will contribute to our high energy, collaborative and fun environment.

What you can expect to do?

• Design and implement solutions for managing and securing Apple devices for effective and secured deployment
• Conduct onboarding, implementation, training sessions for customers
• Utilise available resources to resolve support issues independently and as part of a team
• Work firsthand with customers and employees to troubleshoot, recreate, and/or resolve support issues
• Effectively communicate with customers in all formats such as email, phone, screen sharing etc.
• Build trusting relationships with customers including partners such as Jamf, Apple, Goodnotes, and maintain strong relationships with other internal stake holders
• Use a CRM platform to document and manage activities
• Other duties and special projects as assigned

What are we looking for?

• Diploma (Required); a combination of relevant experience and education may be considered
• Aptitude to quickly learn basic technical concepts and communicate to technical & non-technical audiences
• Ability to perform basic troubleshooting and problem-solving tasks related to server infrastructure, systems, networks, and hardware
• Jamf 100, 170, 200, 300 certification (Preferred)
• Experience with macOS, iOS (Required)
• Experience with Windows, and/or Linux server platforms (Preferred)
• Ability to engage with and establish trust and rapport with all levels of customers and employees
• Ability to work independently and as part of a team
• Capacity to multi-task and quickly prioritise duties
• Exceptional customer service skills
• Strong interpersonal and organisational skills
• Strong self-improvement mindedness
• Excellent written and oral communication skills to thrive in a fast-paced environment
• Business level proficiency in English for clear communication with enterprise customers

Why Aeon Earth?

Aeon Earth is an Apple Authorised Service Provider as A.LAB and a member of the Apple Consultants Network as ALAB360.

We offer Jamf as a solution for managing Apple devices. Additionally, we are a reseller of Cambrionix charge and sync hubs, Goodnotes, and provide IT asset recovery, data erasure services using Securaze and Garner Products.

We encourage you to simply be you. We seek and value different perspectives to ensure Aeon Earth is a place where everyone feels comfortable and be successful.

Benefits are a critical part of the employee experience. Our benefits include annual and sick leave, medical insurance and benefits, snacks and beverages at the pantry. And many others!

Our client is serving the Oil & Gas and Marine Offshore industries’ companies. It is looking for a Piping Engineer.

Job Highlights:

• Permanent role| 5.5 days’ work week
• Location: Gul Circle| Company’s transport available.
• Competitive compensation benefits
• Good career advancement opportunities

Responsibilities:

· Study the project requirement, specification, scope of work and scope supply and other requirements stated

· Attend periodical meeting with client to discuss on the engineering clarification and •engineering status:

· Technical Query (TQR)

· Piping Insulation Document & Drawing Status (isometric drawings, P&ID’s, Piping GA’s, etc.)

-FIM & DM supply piping material status

-Engineering Clarification / Proposal

· Responsible for the master material take off (MTO), procurement of insulation materials and to expedite delivery for materials

· Take charge of master status of Engineering, Procurement and construction status

· Coordinate with fabricator and project team for the execution of insulation work

· Prepare necessary documents for additional claim/instruction to sub-contractor (JCS/JCR/Site Instruction/Timesheet “A” and “AA”).

· Resolve engineering matters as advised or instructed by the department head and engineer manager

· Establish sequence of priority for piping completion with other relevant departments

· Ensure work and materials are in accordance with sequence and stated quality standards and requirements

· Supervise fabrication and installation of piping items are in accordance with drawings and clients’ specifications

· Organize and control shop fabrication activities

Requirements:

· Diploma in Mechanical Engineering or equivalent

· Minimum 8 years of experience in marine/shipyard operations involving site piping fabrication and supervision works

· Highly motivated individuals with good organizational skills and leadership skills

· Able to adapt new work environment and able to lead independently

· Active and positive minded

· Proficient in MS Office applications | Familiar with Excel is very crucial for this role

For Engineering role candidate, he must be PC literate with good Microsoft Excel knowledge to follow up and close up Engineering Issue, Procurement Issue and Construction issue and Test Pack Preparation work.

(NB: No quotas for the foreigners. Singaporeans are welcome to apply.)

Job Related Information:

• Permanent| 5.5 days’ work week | Monday-Friday 8am-5pm, Saturday 8am-12pm
• Office’s Location: Gul Rd, Singapore.

Salary & Benefits:

• Monthly Basic Salary: Based on expertise, academic qualification and skills
• OT pay entitlement: OT Flat rate S$8/- per hour
• Healthcare benefits such as Outpatient, Dental, Health Screening etc.
• Cover with insurances, Personal Accident, Hospital & Surgical, Term Life and Work Injury policy
• Variable Bonuses
• 14 days Annual Leave and 14 days sick leave
• Birthday leave / Festival eve half day leave
• NTUC membership – Applicable for only Permanent confirmed staff
• Company transport provided at 5 pickup points:

Ø Bukit Batok MRT

Ø Jurong East MRT

Ø Boon Lay MRT

Ø Choa Chu Kang MRT (only Morning pickup)

Ø Woodland MRT (only Morning pickup)

NB: NO QUOTA FOR THE FOREIGNERS PLEASE.

• This job vacancy is posted on the My Career Future Jobs Bank portal, which is only for the Singaporeans and Singapore PRs.
• Please contact our Recruitment Manager: Leeza Shaheed (R1770675) for further enquiries about the role @ [email protected]/ [email protected] and send your updated CV in MSWORD with the following information: Nationality, Full name, Total yrs. of exp., relevant work exp. for how many yrs., expected monthly basic salary, latest drawn monthly basic salary, availability, reason for leaving last two jobs.

Venture Cove Pte. Ltd.

(EA License # 21C0547| UEN: 202103896W)

138 Robinson Road, Singapore 068906

Website: http://www.venture-cove.com/

1. Liaise with consultants, clients and subcontractors on the progress of M&E works.
2. Supervise and ensure works are in accordance to the contract drawings and specifications.
3. Prepare method statement, shop drawings, installation / T&C check sheets, work progress report and other relevant documents for M&E related works with project teams.
4. Coordinate with subcontractors and consultants on preparation and submission of shop drawings.
5. Coordinate / prepare technical submissions with suppliers / subcontractors.
6. Assist the Project Manager on all M&E matters including preparing M&E Master Construction and T&C Schedule.
7. Assist Project Manager to negotiate / procure materials, equipment and labour in accordance to (or below) the allocated approved budget.
8. Hold technical discussions with various stakeholders to resolve technical / site issues.
9. Liaise and work with relevant authorities / subcontractors / clients on shop drawings / equipment submissions, inspections, testing requirements and commissioning.

Roles & Responsibilities

• Reports to Construction Manager.
• To assist in site supervision works.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination,supervision & monitoring the progress of the project works on site,manpower mobilization, materials planning & ordering.
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Assist in the preparation of the project schedule and coordinate for all submission.
• Responsible for the quality inspection of the bridge structure.
• Produce weekly site progress report and necessary submission.
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Ensure all legal requirements under Singapore laws are compiled and ensure all standard operating procedures comply with specifications quality standards statutory and regulatory requirements.

Job Requirements:

• Degree in Civil Engineering/relevant studied recognized by PE Board, BCA or IES registered Resident Engineer (RE).
• Minimum 5 years’ working experiences in marine sector.
• Familiar with costing, contract, regulations and building operations.
• Oversee all site projects operations, functions, and requirements.
• Able to handle AutoCAD or relevant drawings submission.
• Required skill(s): MS Office, M.S. Project, AutoCAD.

Job Duties and Responsibilities:

• Provide technical support to resolve technical inquiries from ships/vessels on Nordic Systems.

• Attend on-board service attendances and commissioning services, annual inspection and maintenance for vessels based on troubleshoot of the technical issues and feedback by chief engineer/vessel managers.

• Review service reports, customer technical specifications and provide support to sales team for bidding of spares.

• Troubleshoot issues involving electrical/electronic control systems, PLC products.

• Read and understand manuals, schematics, and P&ID's.

• Lead the preparation and coordination of ITRs based on approved electrical completion procedures.

• Prepare and update status of punch list and ensure all cleared punch items to be acknowledged by the client reps.

• Monitor and manipulate site execution in line with sequence of works.

• Handle technical issues, drawings, reports, procedures and any other relevant documents.

• Develop engineering capabilities and work with sales team on project proposal and bidding.

• Selection of equipment, materials for instrumentation and controls.

• Execution of projects.

• Plan and carry out E&I maintenances

• Manage Subcon and other adhoc activities, lead the team of technicians on site to execute the project.

Job Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic) or equivalent.

• Prior experience in the Maritime/Oil & Gas industries and shipyards will be highly advantageous.

• Excellent verbal and written communication.

• Possess excellent interpersonal and communication skills.

• Responsible, Meticulous and able to work under pressure.

• Proficient with Microsoft Office Applications (Outlook, Word, Excel, Power Point, etc).

• Experienced in PLC/SCADA systems.

• Fluency in English (verbal and written) is essential.

Experience in Installation, Configuration, Administration and Troubleshooting of VMware ESX/ESXi i5.X, i6.x servers Vsan6.7, vCenter Server 4.x, 5.x, and 6.x,7.x 2008, 2008r2, 2012, 2012r2, 2016 and 2019 Servers.

Provide 24*7 On Call Support for Servers.

Design, install, configure and maintain Vmware infrastructure.

Create new VMware virtual machines to meet the specifications provided by the Client.

Manage VM migration, Extending hard disk drive including c: drive, Installing VMware Tools

Implementation and administration of AD,DNS, DHCP server. Managing users and groups in Active Directory, Transferring FSMO Roles from one DC to another

Job Description

• Reports to Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team

- Project site located at NUS

- Must be registered with IES and with valid RE's certificate

- With minimum 5 years' RE site supervision experience with structural and architectural works

- Supervision and practical experience in A&A works and institutional projects would be an advantage

- Conversant with local codes and regulations

Requirements:

1.Minimum Bachelor’s degree in Architecture from recognized universities and from the professional engineer’s board is required.

2. Minimum 1year of working experience in Singapore as Architectural coordinator in large scale building / civil projects with main contractor in Civil Construction Projects.

Proficient in Autodesk AutoCAD, Revit Architecture, 3ds Max, Sketch up.

3.Proficient in Adobe Photoshop, Illustrator, In-Design

4.Proficient in Microsoft Office, Microsoft Project

Job Description:

1. Develops and implements design and detailing.

2. Highly technical in design, experienced user of Auto CAD, sketch up, Photoshop & office software’s with strong attention to design details.

3. Hands on experience in managing project schedule, deliverables, clients and consultants.

4. Coordination on all architectural drawings and works, prepare, submit and update Shop Drawings & As-Built submissions.

5. Review & resolve with consultants on conflicts with architectural drawings and structural/M&E issues.

6. Prepare RFI, RFA, and RFMA & RFSDA & follow the Architectural consultant & Sub-contractors.

7. Prepare Technical Meeting Minutes & Site Progress Meeting Minutes to resolve the issues.

8. Generate Design Strategy, Concept Design and the production of Detailed Working Drawings using AutoCAD, Revit, and Sketch-up & Photoshop.

9. Attend site visits with others and liaise with contractors and design/construction team.

10.BIM Coordination for Architecture discipline including accuracy and conformance check against the Singapore BIM standards.

11.Develop BIM Modelling Schedule in line with construction schedule and monitor the delivery of BIM submission.

12.Produce Detailed Shop Drawings from Revit for submission.

13.Create Drawings for Authorities’ submission.

About the Role

We are looking for a Data Engineer to join the Data and Artificial Intelligence Platforms (DAIP) team.

Key Responsibilities

• Build and manage data pipelines to collect, clean, and harmonize data.
• Monitor databases and ETL systems, ensuring performance, capacity, and uptime.
• Create reusable data models based on end-user needs.
• Design secure data access mechanisms and implement data quality checks.
• Maintain data catalogs, enforce governance policies, and improve infrastructure.
• Research and adopt new technologies to enhance data systems.
• Protect sensitive data through security best practices.

Senior engineers will additionally:

• Establish best practices and mentor team members.
• Assist with recruitment.

Expectations

Beyond coding, you'll determine what to build and how, leveraging cloud services, open-source tools, and community solutions to maximize value and minimize redundant effort.

Working Here

• Impactful Work: Develop products that solve real societal challenges in areas like healthcare, transportation, and education.
• Rapid Prototyping: Test ideas quickly to identify opportunities and problems.
• Ownership: Take responsibility for seeing your ideas through.
• Continuous Learning: Embrace learning new technologies and frameworks as part of the job.

Skills & Requirements

• Proficiency in Python, JavaScript, or Scala, with a passion for software engineering.
• Experience writing efficient, reliable, and maintainable code.
• Exposure to cloud or on-prem environments; experience with DevOps/CI/CD is a plus.
• Interest in data science, machine learning, and working for public good.

Job Description:

• Carry out electrical system studies for MV / LV Equipment like Power and Distribution Transformers and switchgears.
• Knowledge of electrical power systems, international codes & standards and Industry accepted electrical engineering software’s.
• Prepare electrical job specifications and datasheets as per customer / tender requirements.
• Execution of assigned site work in accordance with applicable contract procedures, IEC codes and standards.
• Perform activities such as – prepare quotations and technical bid evaluations as per relevant technical requirements.
• Review vendor drawings and documentation as per relevant Technical Practices.
• Manage sub-con to ensure timely completion of projects.
• Follow the ethics of confidentiality on technologies licensed by Client or Third Party.

Requirements:

• Degree or Diploma in Electrical Engineering
• At least 2 years' relevant experience in handling both HV and LV, preferably in Construction environment
• Prior experience in project and maintenance in the Transformers, switchgears and LV switch boards, DC Traction systems.
• Proficient in AutoCAD and able to read engineering drawings
• Team player with strong leadership, interpersonal, planning and organizing skills
• Self-motivated and resourceful individual
• Class -3 driving licence is preferable

Responsibilities:

• Consults with supervisor, systems analysts, other programmers, and end users to gather information about program intent, functions, features, data requirements, input requirements, output requirements, internal and external checks and controls, hardware and operating system environment, and interfaces with other systems.
• Designs and writes program specifications based on consultations with supervisor, systems analysts, other programmers, and end users.
• Converts designs and specifications into computer code.
• Compiles code into programs and corrects errors detected in the compile process.
• Creates test transactions and runs tests to find errors and confirm the program meets specifications.
• Analyses code to find causes of errors and revise programs.
• Writes and maintains documentation of changes to computer code, programs, and specifications.
• Designs and codes layouts for onscreen user interfaces, printed outputs, and interfaces with other systems.
• Engages in user review and technical documentation written by others to confirm consistency with program operations.
• Provides technical assistance by responding to inquiries regarding errors, problems, or questions with programs.
• Revises programs for corrections, enhancements, or system environment changes.
• Trains end users or technical support staff to use and support programs.
• Other duties as required. This list is not meant to be a comprehensive inventory of all responsibilities assigned to this position

Required Qualifications/Skills:

• Bachelor’s degree and 8+ years’ related experience and/or training; or equivalent combination of education and experience
• Networks with key contacts outside own area of expertise
• Determines methods and procedures on new assignments and may coordinate activities of other personnel
• Experience with programming or computer science/engineering
• Familiarity with relational database schemas and SQL
• Knowledge of using modern developmental tools
• Expertise in programming a software program (windows or web based) that interacts with a relational database
• Knowledge of coding languages
• Knowledge various development methodologies

Job Description

• Responsible for construction planning and scheduling of materials, manpower, plants and equipments ;
• Projection and monitoring the progress of works ;
• Preparation of weekly / monthly progress reports ;
• Coordinate with project team to ensure activities are completed on time.

Job Requirement

• Degree / Diploma in construction related field ;
• Minimum 5 years of working experience as Planning Engineer

• Carry out Electrical, Instrumentation, Control and Automation (EICA) design for construction projects.
• Manage the procurement, costing and delivery of electrical software and hardware required
• Make PLC programming according to clients’ technical specifications
• Liaise with contractors for control panel, electrical equipment and components delviery
• Organize and lead testing and commissioning at site
• Attend to EICA breakdowns with diagnosis and solutions
• Attend meetings with subcontractors and clients for technical clarifications and arrangements.
• Keep records of EICA design, drawings, and document systematically
• Provide support and assistance to Sales Department and Maintenance Team
• Other ad-hoc assignments.

Requirements

• Bachelor's Degree in Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.
• Minimum 3 years related working experience
• Proficient with PLCs, like Siemens, Schneider, Allen-Bradley, ABB & Omron
• Well-versed with SCADA and HMI
• Excellent communication skill

• Collaborate with engineers, architects etc. to determine the specifications of the project
• Negotiate contracts with external vendors to reach profitable agreements
• Obtain permit and licenses from appropriate authorities
• Determine needed resources (manpower, equipment and materials) from start to finish with attention to budgetary limitations.
• Plan all construction operations and schedule intermediate phases to ensure deadlines will be met
• Acquire equipment and materials and monitor stocks to timely handle inadequacies
• Supervise the work of laborers, mechanics etc. and give them guidance when needed
• Evaluate progress and prepare detailed reports
• Ensure adherence to all health and safety standards and report issues
• Materials quantity take off , Drafting works if necessary

Job Requirements:

• Proven experience as Project Manager
• In-depth understanding of construction procedures and material and project management principles
• Familiarity with quality and health and safety standards
• Outstanding communications and negotiation skills
• Able to use Microsoft office , microsoft project , autocad , revit , naviswork and other engineering softwares skillfully.
• Excellent organizational and time-management skills
• A team player with leadership abilities
• Advances time management and analytical skills
• Excellent client-facing communication skills
• Candidate must possess at least BSc/BA in Engineering Civil) or Engineering (Metal Fabrication/Tool & Die/Welding) or relevant field (Degree is recognized by BCA will be an advantage)
• 5 years' experience in Project Management (Metal Works)
• Able to liaise with Chinese client

Job Descriptions:

• Developing in-depth understanding of project scope and requirements
• Assist in maintaining and monitoring project plans, project progress and project schedules
• Documenting and following up on actions and decisions from meetings
• Assist to liaise and coordinate with the technical team, clients, main contractors and authorities with regards to the project
• Plan and coordinate project for various sites and projects undertaken by the company and when assigned by company including but not limited to the areas of logistics and resources, manpower, equipment, etc.
• Responsible for the Planning, Coordinating Logistical arrangement for timely delivery of product / services to customer according to project requirement and schedule.
• Prepare and write construction project plans (CPPs), method statements, risk assessments and proposals;
• Attending all meeting and presentations for operations, blasting conferences and all company’s internal meetings.
• Any other duties that may be assigned from time to time by the company.

Job Requirements:

• Diploma/Degree in Civil Engineering/Mechanical Engineering or equivalent
• Experience in project administration is a plus
• Ability to work on tight deadlines, task oriented and meticulous
• Excellent organization skills, including multitasking and time-management
• Ability to work independently yet a team player

Job Description:-

• Plan and execute work plans on site.
• Prepare weekly progress reports and weekly work plan on project work.
• Work with design engineers for as-built drawings, section drawings.
• Supervise and monitor workers / welders on site for installation or maintenance.
• attend site meetings with clients / architects and authorities on project technical matters.

Requirements:-

• Minmum Diploma in either mechanical, Electrical or Construction Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• Has work experience in construction sites.
• Responsible team player with the ability to work independently in challenging projects and timelines.

Service, repairs, maintenance of Marine Electronics Systems on board the vessel including but not limited to Communication, Navigation and Bridge equipment.

Responsible for turn-key implementation of On-board Marine projects including Planning, Installation, Testing and Commissioning of Navigation and Communications systems such as: Radar systems, GMDSS stations, Gyro compass, Autopilots, BNWAS, Satellite TV systems, CCTV systems, Echo sounders, Speed logs, AIS, SSAS, Inmarsat terminals, ECDIS, SVDR, etc.

Strong service field orientation with a proven, demonstrable track record of having completed on-board installations, repairs and servicing of Radar`s, Gyro`s, Echo sounders, Speed logs, GMDSS equipment, Inmarsat terminals, Satellite TV systems, BNWAS, ECDIS, SVDR`s, AIS, LRIT, VTMS, VSAT, etc.

Pleasing personality, good interpersonal and communication skills.

An ability and willingness to adapt to on-shore installations and project execution (and pre-sales related activities, as required).

Ability to work independently or as a part of a team.

Ability to execute maintenance contract.

Ability to execute projects in time bound manner, within the allocated budget and resources.

Skills in computer hardware, networking and software are essential.