Job Scope:

You will assist the Transformation team in the following areas:

· Design internal comms content, e.g. EDMs, articles, infographics, bite-sized videos, etc.

· Publish and maintain the repository of the internal comms content

· Provide administrative and logistics support for staff well-being initiatives and staff engagement activities

· Perform tasks associated with the planning and execution of events

Requirements:

• Diploma holder and above
• Good communication and interpersonal skills
• Ability to work effectively as an individual and in a team
• Proficient in Microsoft Office applications e.g. PowerPoint and Word
• Proficient in graphic design, video editing software and have good knowledge of social media/design/communications trends
• Experience in video filming and event photography will be an added advantage

Salary: $11 to $18/hour

Location: Maxwell Road

Contract Period: 6 months

Working Hours:

Mon to Thurs: 8.30 am to 6pm

Fri: 8.30am to 5.30pm

EA License No: 96C4864

Reg. No.: R24121728

Job Responsibilities

· Inform Design Team, Cost / Commercial team of all client-led change proposals and instructions.

· To manage local consultants in the execution of design development.

· To assist in coordination between Design Team, Consultants, Operator stakeholders.

· Assist site team in resolution of site clashes.

· Participate in workshops and lead, manage the consultants as required in review and comment of shop drawings in terms of constructability, sequencing and ensure quality of he design aesthetic is maintained throughout.

· Follow through on design development of Concept, Schematic, Development and Construction Documentation for all projects where applicable.

· To attend and review Mock Ups.

· Conduct site and factory visits to ensure implementation and compliance with approved design intent and direction.

· Interfacing with internal and external Operations Management to ensure timely incorporation of operational requirements within the project design.

· Manage the design change process to ensure minimal impact to project schedule and minimize cost impacts as a result of such design change.

· To assist consultants and design team to complete and resolve any unforeseen interface problems throughout the various Design Phases.

JOB REQUIREMENTS

• Minimum 8 year’s working experience in Architecture Design Management of Hospitality would be preferred
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Architecture, Interior Design or equivalent.
• Possess good communications and people skills
• Good organization, coordination and leadership skills
• Required skill(s): design development, project management, construction.

About Us:
At Luxx Newhouse Group, we specialize in providing premium engineered surfaces, including sintered stones, solid surfaces, and quartz. Our commitment to excellence is reflected in our end-to-end solutions—from supply to fabrication and installation. We are a dynamic and innovative company looking to expand our team with creative minds who thrive in a fast-paced environment.

Position Overview:
We are seeking a talented and passionate Product Design & Visualisation Intern to join our team. As an intern, you will collaborate with our product design and visualisation teams to create compelling and high-quality designs that showcase our engineered surfaces. This is an excellent opportunity for someone looking to gain hands-on experience in design and 3D visualisation in a cutting-edge industry.

Key Responsibilities:

• Assist in the design and development of product concepts and visual presentations for our engineered surfaces.
• Create 3D visualisations, renderings, and prototypes using CAD software (e.g., AutoCAD, SolidWorks, Blender).
• Collaborate with the design team to refine product concepts, ensuring they align with brand standards and client requirements.
• Support the creation of marketing materials, presentations, and product brochures.
• Work on client-specific customisation projects and provide design solutions that reflect their vision.
• Assist in the preparation of mood boards, sketches, and material mock-ups for presentations and client meetings.
• Participate in product brainstorming and ideation sessions.

Qualifications:

• Currently pursuing a degree in Industrial Design, Product Design, Architecture, or a related field.
• Proficiency in 3D modelling and visualisation software (AutoCAD, Rhino, Adobe Illustrator, Adobe Photoshop, Keyshot, etc.).
• Basic understanding of design principles, material properties, and manufacturing processes.
• Strong attention to detail and a creative problem-solving approach.
• Ability to work independently and as part of a collaborative team.
• Excellent communication and time management skills.
• A portfolio showcasing relevant design work will be highly regarded.

Duration:
3-6 months (with potential for full-time employment after successful completion)

Why Join Us?

• Gain hands-on experience with cutting-edge materials and product design.
• Work in a collaborative and innovative environment.
• Opportunity to learn from industry experts and make an impact on real-world projects.

If you're ready to immerse yourself in the world of premium product design and visualisation, we'd love to hear from you!

Purpose of the Role:

The Design & General Manager at ALBD Living, Singapore, will be pivotal in driving the company’s vision to become the leading boutique full-service Interior Design, Marketing, and Branding Studio. This role combines strategic leadership with hands-on management to ensure operational excellence, financial growth, and the delivery of exceptional design solutions. By fostering innovation, building strong client and supplier relationships, and cultivating a high-performing team, the Design & General Manager will position ALBD Living as a thought leader and a trusted partner in the industry.

Key Responsibilities

1. Operational Leadership:

· Oversee all aspects of the Singapore office, including design, client service, and project execution.

· Manage performance targets, KPIs, and budgets to achieve financial and strategic goals.

· Ensure operational efficiency, optimize processes, and maintain compliance with regulations.

2. Financial Management:

· Achieve EBITA targets (20%) by improving operating ratios, pricing strategies, and supplier relationships.

· Drive financial growth with a minimum benchmark of SGD $3M in revenue within 12 months.

3. Organic Revenue Growth:

· Focus on expanding the Singapore/Australia client base through new acquisitions and enhancing relationships with existing clients.

4. Leadership and Team Development:

· Recruit, train, and lead a high-performing team in a collaborative and scalable work environment.

· Conduct workshops and training sessions to develop skills and prepare the team for future growth.

5. Design Excellence:

· Champion innovative and high-quality design solutions aligned with ALBD Living’s brand vision.

· Ensure projects meet exceptional standards for creativity, functionality, timelines, and budgets.

6. Client and Supplier Relationship Management:

· Build strong relationships with clients and suppliers, ensuring high satisfaction and retention rates.

· Act as a trusted advisor to deliver exceptional service and outcomes.

7. Market Expansion & Positioning:

· Establish ALBD Living as the leading boutique full-service studio in Singapore.

· Develop strategies to maintain thought leadership through speaking engagements, publications, and industry awards.

These KPIs ensure a balance between creative excellence, client satisfaction, and the company’s commercial success. Regular tracking and evaluation of these metrics will guide the continual improvement of both creative and strategic efforts.

Requirements:

· Bachelor’s Degree in Interior Design, Architecture, Business Administration, Marketing, or a related field.

· 10+ years of experience in a leadership role within the Interior Design, Branding, or Marketing industry.

· Proven track record of achieving financial growth, including meeting revenue targets.

· Demonstrated ability to oversee business operations, including design, project execution, and team leadership.

· Experience in client relationship management and supplier negotiations.

· Strong understanding of financial metrics such as EBITA, cost optimization, and pricing strategies.

· Familiarity with the Singapore and Australia markets is advantageous.

Skills:

· Leadership and Strategic Vision: Exceptional leadership skills to inspire and manage diverse teams and drive business growth.

· Financial and Operational Management: Expertise in achieving financial objectives and optimizing operational processes.

· Creative Excellence: Strong ability to champion innovative, high-quality design solutions.

· Client and Supplier Management: Outstanding interpersonal skills to build trust and deliver exceptional client outcomes.

· Business Development: Acumen for identifying and capturing new opportunities and expanding market presence.

· Team Building: Skilled in recruiting, mentoring, and fostering a collaborative work environment.

· Design and Branding Knowledge: Solid understanding of design principles, marketing strategies, and branding trends.

· Public Speaking and Thought Leadership: Ability to represent the company through speaking engagements, publications, and awards.

· These concise requirements and skills highlight the qualifications and expertise needed for the role.

Roles & Responsibilities:

• Responsible to create concept designs for sales proposal and as well as detail design for confirmed projects.
• Ability in selecting the right components, design of fabrication items as well as working with vendors/sub-con for assigned projects.
• Responsible for planning and executing strategies for completing projects on time and also managing the projects’ budget.
• Exhibit a level of creativity and ingenuity, as well as problem solving skills, to provide reliable, cost-effective solutions to design issues and attend to customers’ enquiries.
• Working with respective project engineer and assembly team on project schedule management, budget management, as well as customer’s review/discussion.

Job Requirements:

• Minimum of 3 years relevant experience in related process manufacturing
• Degree in Mechanical Engineering
• Working knowledge of high-level communication protocols and troubleshooting skill
• Good analytical and planning skills
• Able to work under very tight project timeline
• Independent and good team player
• Willingness to travel overseas, as required

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

- Location: Bedok

- 5days work

- Basic + AWS + VB

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.

Requirement:

• Diploma/ Degree in Electrical/ Electronics Engineering or related discipline
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

JOB DESCRIPTION

· Discussion with system engineers on SoC architecture and feedback on optimization.

· Work on SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Discussion with synthesis engineer and back-end engineer on design optimization.

· SoC DFT support;

· SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Knowledge of ASIC design flow

· Experience in RTL coding, RTL and gate-level debug

· Understanding of DFT, timing and power requirements

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Knowledge on mixed-signal design would be an advantage.

JOB DESCRIPTION

· Discussion with system engineers on IP requirement and micro architecture.

· Develop IP (control path intensive or data path intensive) meet functional requirement and protocol standard.

· Support SoC designer on integration, timing constraints and power domain setting.

· Support IP verification for verification plan review, test case debugging.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience in IP development (either control path intensive or data path intensive)

· Knowledge of timing, DFT and power structure.

· Familiar with UNIX/ Linux environment and scripting

· Experience on communication IP and/or video IP development would be advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Experience on communication IP development would be an advantage

· Experience on video IP development would be an advantage

JOB DESCRIPTION

· Work with system engineers on timing requirements and feedback on optimization.

· Work on SoC timing constraint, synthesis and timing closure.

· Work on power structure, eg. Isolation of power domains, level-shifter crossing voltage domains

· Conduct formal verification for release comparison.

· Support back-end implementation on timing violation analysis and fix.

· Support scan insertion and optimization.

· Support on power structure and power optimization.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Familiar with ASIC design flow

· Experience in logic synthesis, static timing analysis, timing closure

· Good understanding of DFT and Power structure.

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Responsibilities:

- Create engaging social media content for our social media channels including Facebook, Instagram and TikTok

- Develop strategies for website enhancement

- Design marketing collaterals online and offline, and assist in sales team in creation of artwork for physical stores

- Collaborate with marketing team to develop marketing strategies and campaign

- Monitor and track social media metric to evaluate success of campaigns

- Stay up-to-date for social media trends

Requirements:

- Relevant diploma in Marketing/Art/Design courses' to 'Currently pursuing a Diploma in Marketing/Art/Design courses'

- Passion for marketing related design and content creation

- Proficient in graphic design software such as Adobe Photoshop, Illustrator, In-design, After Effects

- Excellent writing and communication skills

- Knowledge of digital marketing

- Positive attitude and willingness to learn

5days work week

about the company

My client is a leading manufacturer of digital electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career

about the job

• Design and realization of the chip floorplan, clock architecture and powerplan
• In charge of physical design tasks from netlist to GDSII (P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout)
• Lead analog designs during product development
• Physical design methodology of advanced process nodes and builds an automatic physical design platform

skills & experience required

• PhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics Engineering
• Min 4 years of hands on / research experience with digital backend ICs circuit design / physical design
• Well versed with synthesis, place & route, STA and design convergence
• Willing to work in a new start up entity in Singapore
• Proficient in tapeout experience at advanced technology will be a plus
• TCL,Perl,Python script development and familiar with EDA tool design

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• Kaki Bukit (East)

Your Responsibilities: -

• Generate mechanical drawings
• Coordinate with customers about requirements and feedbacks
• Ensure drawings are in correct specification and requirements
• Follow-up of assembly and installation work

You will need: -

• No experience required, traning provided

Apply now or email to [email protected]

Good luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 Recruit Lync Pte Ltd 22C1000

My client is a well established C&S consultant firm in town.

Multi-disciplinary consulting civil and structural engineering services.

Responsibilities:

• Carry out comprehensive analysis and design works for complex and large scale projects.
• Perform analysis and design for the project
• Supervise the drafting of drawings related to design.
• Ensure all engineering works comply with relevant statutory standards, regulations and Codes of Practice.
• Assist QP/Project Lead in managing project stakeholders, clients, design team, site team and other relevant parties.
• Liaise and coordinate with contractors, project team and design consultants.
• Work independently in analyses, design, submissions, construction support and coordination works.

Requirements:

• Possess a Civil and Structural Engineering degree recognized by the Professional Engineers Board of Singapore.
• With working experiences in Singapore on structural engineering projects.
• Minimum structural design experience 5 years.
• Well verse with structural engineering design to local Codes, Regulations and requirements, and Eurocode.
• Well verse in structural design software, e.g. ETABS, STAAD Pro, SAFE, SAP 2000, MIDAS, etc.
• Familiar with authority submission requirements for civil-structural works.
• Experience in design/project management works in BIM.
• Knowledge in temporary works, ERSS will be an advantage.
• Conversant with statutory code and requirements for site supervision, quality control procedure and construction administration.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description:

• Create initial PV module layout arrangement for new solar projects
• Interpreting civil and structural documents to for design purposes
• Propose modification solutions to electrical systems when necessary for grid tie-in systems
• Selection and sizing of equipment, PV solar module, inverter, cable, and cable trunking etc., technical analysis, performance, and glare simulations
• Prepare Pvsyst simulation report when required
• Implement electrical design including SLD drawing for solar projects
• Finalize the electrical system design and prepare construction documents
• Check existing drawings and survey existing site conditions to enhance solar PV performance on site
• Identify problem areas that will affect design of new PV systems
• Constantly updated as-built construction drawings and documents for on-going projects

Requirement:

• Diploma/Degree/Certificate in Electrical Engineering. Clean Energy Engineering or equivalent
• Minimum 1-3 years relevant work experience, preferrably in solar PV industry
• Sound knowledge of local Singapore PV installation standards e.g. SCDF, SPPG, EMA, BCA etc.
• Has knowledge in electrical and PV solar design concepts
• Knowledge in energy modelling software (PVsyst), AUTOCAD software

Committed individual with great initiative and strong problem-solving skills

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Our client is a well-established construction, property development and specialist engineering solutions provider. Currently, they are currently seeking for Design Manager to be part of the team.

The ideal candidate is a highly experienced and skilled Design Manager with minimum of 15 years of civil engineering or architecture experience post-tertiary education and hold professional status. The candidate should have a proven track record of managing design teams on projects for large scale of Design & Build nature of industrial or treatment process plant. The Design Manager must be well-versed with regulatory agencies’ requirements and standards.

JOB DIMENSION (SCOPE)

• Lead and manage design consultant teams to deliver high-quality design solutions on time and within budget.
• Oversee the entire design process, from concept through to detailed design and construction documentation.
• Ensure designs meet project specifications, regulatory requirements, and client expectations.
• Coordinate with multidisciplinary teams, including architects, engineers, and consultants.
• Foster a collaborative and productive team environment.
• Provide mentorship and guidance to junior designers and engineers.
• Act as the primary point of contact for clients and stakeholders on design-related matters.
• Conduct regular meetings and presentations to update clients on project progress and address any concerns.
• Ensure client requirements are accurately captured and reflected in the design.
• Implement and enforce quality control procedures to ensure the highest standards of design.
• Review and approve design documents, drawings, and specifications.
• Conduct regular design audits and peer reviews to maintain quality and consistency.
• Ensure all designs comply with relevant regulatory requirements and standards.
• Liaise with regulatory agencies to obtain necessary approvals and permits.
• Stay updated on changes in regulations and standards and ensure designs are adapted accordingly.
• Provide technical leadership and expertise in civil engineering or architecture.
• Resolve complex design challenges and technical issues.
• Stay informed about the latest industry trends, technologies, and best practices.

JOB REQUIREMENTS

• Bachelor Degree in Civil Engineering, Architecture, or a related field.
• Master’s degree is preferred.
• Minimum of 15 years of relevant experience in civil engineering or architecture.
• Proven experience in managing design teams on complex projects.
• Experience in the design of multi-storey bus depots or similar structures is preferred.
• Professional Engineer (PE) or Registered Architect (RA) status.
• Strong leadership and team management skills.
• Excellent communication and interpersonal skills.
• Proficiency in design software and tools (e.g., AutoCAD, Revit, BIM).
• In-depth knowledge of regulatory requirements and standards.
• Strong problem-solving and decision-making abilities.

COMPANY DESCRIPTION

Headquartered in Singapore, The EtonHouse International Education Group has 120 schools across 11 countries. We run pre-schools as well as K-12 international schools. Together, these schools provide internationally recognized programmes and high-quality education to over 20,000 students globally. The group also runs enrichment programmes and cutting-edge ed-tech programmes to scale the provision of high-quality education in pre-schools.

Over the last 27 years, EtonHouse has been at the forefront of international education in the Asia Pacific region and has won numerous awards. In 2019, our founder, Mrs. Ng Gim Choo won the EY Entrepreneur Of The Year Award in the Education category. In addition, EtonHouse was recently selected to be in the inaugural cohort of the Scale-Up SG programme, which is an Enterprise Singapore programme selecting high-growth potential local companies which can be groomed into future global champions.

With children at the heart of what we do and the vision to make good quality education accessible to every child in Singapore, EtonHouse launched the EtonHouse Community Fund (ECF) in 2015. As an independent IPC charity, ECF continuously runs initiatives to make a difference in the lives of vulnerable children.

EtonHouse Vision

Shaping the future through education

EtonHouse Mission

Developing confident and capable global citizens

Be a part of the EtonHouse family

We welcome passionate and dedicated professionals who share our belief in the power of education. Together, we can make a meaningful difference to children and society through education.

RESPONSIBILITIES

This is an exciting opportunity for an experienced Design & Technology teacher to join a growing, boutique school in the heart of Singapore. The successful applicant will be expected to teach Design & Technology from ages 9-16, Upper Primary to IGCSE. The school offers IGCSE Design & Technology so experience in this area would be an advantage. They will have outstanding subject knowledge and have the ability to enthuse and inspire students, maximising achievement and progress at all levels. A teacher with flexibility, resilience, and a caring and kind approach towards students. A learner with a drive to develop creative new approaches to student learning within a collaborative environment.

KEY RESPONSIBILITIES

• Deliver the Design & Technology curriculum to assigned classes in accordance with the school's timetable.
• Differentiate lessons according to the abilities and learning needs of individual students.
• Promote independent learning by adopting teaching and learning strategies which develop the competence and confidence of every student.
• Ensure the thorough implementation of subject specifications, teaching schemes, assessment policies and reporting procedures.
• Assess and develop the Design & Technology curriculum in the school
• Plan and deliver schemes of work, including the choice of appropriate teaching and learning methods to meet the needs of the subject, and of different students.
• Keep abreast of current developments in Design & Technology education and to adapt the curriculum content and methods of teaching and examining as appropriate.
• Identifying appropriate resources within the limits of the school budget.
• Ensure health and safety policies are followed within the Design & Technology workshop.
• Ensure that the Design & Technology workshop presents a stimulating environment, which help to influence students' attitudes positively towards the subject.
• Ensure students' work is regularly assessed and that homework is in line with school policy.
• Report to parents in accordance with the school's reporting policy.
• Use information gained from assessment, recording and reporting procedures to generate further improvement in student achievement.
• When required, take on a form tutor role in the Senior School and fulfill the responsibilities of that position.
• Follow the School's policies and procedures with regard to discipline and behaviour, daily routines, duties, homework, leave of absence and visits.
• Contribute to co-curricular activities that broaden students' experiences and contribute to the general life of the school.
• Promote the study of Design & Technology amongst students and parents.
• Attend and contribute to meetings of a professional nature.
• Maintain appropriate links with teaching colleagues in all sections of the school and foster cross-curricular links where appropriate.
• Liaise with members of the Inclusive Education Team with regard to individual students, to ensure that those needs are understood, planned for and met.
• Develop effective links with the wider community, in order to extend the study of Design & Technology and enhance teaching and learning.

• At least 2 5 years relevant professional teaching experience in education;
• The candidate should hold a minimum of a Bachelor Degree in Design and Techonlogy or Education or equivalent, which is obtained from a recognised University or College involving not less than 3 years full time study;
• Teachers Certificates, Diplomas or other Teacher Accreditation courses and certification are required if the applicant's degree is not in Education;
• IB PYP course and training are highly valued;
• Knowledge of or willingness to acquire knowledge of inquiry based learning is required;
• Applicants must provide original copies of their Certificates and academic transcripts for authentication;
• International experience, especially in Asia is highly regarded.