• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.

Responsibility

• Responsible for high-performance block implementation (RTL to GDSII).
• Perform block level floor planning, power grid implementation, APR placement, timing optimization, CTS and routing.
• Close the design to meet timing, power budget and area targets.
• Run physical verification flows (DRC/LVS/EM/IR), and implement fixes to meet the requirements.
• Implement ECO’s to address functional bugs, timing and physical verification violations.
• Responsible for the generation and maintenance of block-level STA constraints and performing STA signoff checks.
• Responsible for timing model generation and supporting the successful integration of blocks into SOC.

Qualification

• At least 3 years of hands-on experience in digital-physical design.
• Bachelor/Master’s degree in Electrical Engineering with an emphasis in IC design
• Experience with digital Physical design and Static Timing Analysis
• Experience in floor planning and routing.
• Experience in advanced process nodes (5nm).
• Good experience with Synopsys implementation tools (DC, ICC2), and experience with Cadence (Innovus) implementation tool is a plus.
• Experience in Mentor Verification tool, Calibre.
• Proficient in TCL coding, Perl/Python knowledge is a plus.
• Good written and communication skills.

Job Scope :

- Assume responsibility for technical assignments involving basic or applied research or the design and development of Electrical hardware products. Includes design, fabrication, modification and evaluation of electromechanical devices, components or systems.

- Devise initial concept of assigned device, component or system and participate in the overall detailed Electrical perspective of product design.

- Creates original hardware, circuits, components, software, processes, and models to prove the feasibility of the design approach being investigated. Inclusive of Electronics and PCBA

- Participate in design review by providing inputs relating to DFM and DFA, etc.

- Prepare and release Engineering drawings/schematics while communicating to local vendors to expedite delivery of design parts and assemblies.

- ECO release of engineering documentation.

- Design of AC/DC power distribution systems including selection of circuit breakers, power supplies, contactors and cabling harnesses. Knowledge of PCBA Design, component selection and trouble shooting.

- Develop, test and document designs

- Develops estimates for products and projects. Power consumption, weight, size and schedule.

- Coordinates with manufacturing during pilot run and first production runs to ensure efficient transition from engineering into production.

- Interface effectively with customer to understand technical requirements and propose quality solutions.

- Possesses good electrical troubleshooting skills, and is able to troubleshoot at customer sites.

- Interfaces effectively with other organization such as Purchasing, Marketing, Service, and Quality Assurance as needed to carry out responsibilities

- Assists engineering management in developing schedules and specifications for new and legacy products.

- Maintains a high level of technical competence and state-of-the-art awareness.

- Directs engineering and technical support personnel as required.

- Maintains a high level of technical competence and state-of-the-art awareness.

- Performs other related duties as assigned.

Requirements:

- Degree / Masters in Engineering or requivalent

- 3 – 5 years of relevant experience

- Must possess relevant experience in Semicon Equipment Build

- Good working knowledge of electrical systems including motion, temperature measurement, PID loops, and safety interlock circuits.

- Experience working on dynamic electromechanical system design

- Proficient user of orcad, autocad, pcad, Solidworks or similar 3D CAD Software

- Design knowledge on NFPA, Semi Safety Requirements, and Machine safety.

- Good communication and interpersonal skills.

- Good command of written and verbal English

Responsibilities:

Design mould, tooling and test socket solutions based on customer specifications, semiconductor packages, and testing requirements.

Utilize CAD tools (such as CREO, AutoCAD, SolidWorks, or similar) to create detailed 3D models and technical drawings.

Ensure designs meet mechanical, thermal, and electrical performance requirements for high-precision semiconductor testing.

Select appropriate materials, tolerances, and manufacturing methods to ensure product durability, precision, and cost-effectiveness.

Able to carry out the R&D of new test socket whenever the market trend is needed.

Work closely with cross-functional teams, including Sales, Product Development, Process Engineering, and Manufacturing, to refine designs and ensure compatibility with testing equipment and processes.

Provide technical support to manufacturing teams during prototyping, production, and assembly to resolve any design-related issues.

Engage with customers and vendors to ensure all moulds, tooling and test socket solutions meet functional requirements and industry standards.

Oversee the prototyping phase, ensuring that initial designs are built and tested effectively.

Lead or participate in validation and testing efforts to ensure the tooling and test sockets perform under specified conditions (e.g., temperature, mechanical stress, electrical signals, thermodynamics).

Analyse test data and provide feedback for continuous improvement in design and materials.

Continuously seek to improve design efficiency and product performance, optimizing socket contact interfaces, reducing testing time, and improving signal integrity.

Innovate by introducing new design techniques, materials, or technologies that improve the quality, reliability, and cost of the test sockets and tooling solutions.

Stay up-to-date with the latest semiconductor technologies and testing methodologies to ensure cutting-edge designs.

Develop and maintain comprehensive documentation for all designs, including detailed engineering drawings, materials specifications, and manufacturing processes.

Create user manuals and technical documentation to guide customers and internal teams on the proper usage of tooling and test sockets.

Qualifications:

At least Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field.

5+ years of experience in mould & tooling design AND test socket design within the semiconductor industry or a related field.

Proven experience in designing test sockets, jigs, fixtures, and other related components for semiconductor testing.

Proficiency in & Hands-on experience with CAD software for mechanical design and simulation (e.g., CREO, SolidWorks, or AutoCAD).

Understanding of semiconductor testing processes and requirements (ATE – Automated Test Equipment).

Strong mechanical design and analytical skills.

Knowledge of materials science, particularly in relation to thermal management, wear resistance, and conductivity in socket designs.

Familiarity with signal integrity, high-speed test interfaces, and electrical characteristics relevant to test socket performance.

Excellent problem-solving skills, with the ability to identify and address complex technical challenges.

Strong attention to detail and precision in design and documentation.

Ability to work independently and as part of a cross-functional team.

Familiarity with industry standards for semiconductor testing (JEDEC, EIA, etc.).

Effective communication skills for both internal team coordination and customer interactions.

Willingness to travel occasionally for customer visits, manufacturing site inspections, or vendor meetings.

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

Job description

• Prepare drawings for the production line & provide design information to customers upon their requests.
• Follow up on customers’ requests & requirements. Provide on-site & off-site service to customers.
• To pick up any orders for fabrication or modification from customers.
• To abide by all contractual assignments and rules and regulations in any OEM maker contract.
• Require traveling or attached to overseas assignment and will be subjected to overseas allowance.
• To follow all duties and responsibilities assigned by the management or superiors.

Requirements

• Degree / Diploma in Mechanical Engineering or equivalent
• Proficient in CAD software, preferably in AutoCad & SolidWorks
• Preferably with knowledge in Jigs & Fixtures design
• Preferably with experience in the Semiconductor industry
• 3-5 years of relevant experience

Job Responsibilities:

Project Design and Development:

• Lead the design process for civil/structural engineering aspects of deep excavation projects.
• Develop detailed geotechnical design plans, ensuring compliance with relevant codes and regulations.
• Conduct engineering analyses, including stability assessments and structural integrity evaluations.

Technical Leadership:

• Provide technical guidance and mentorship to junior engineers and design teams.
• Review and approve design calculations, drawings, and specifications.
• Troubleshoot and resolve complex design and construction issues.

Stakeholder Collaboration:

• Collaborate with multidisciplinary teams, including architects, contractors, and project managers.
• Liaise with clients, regulatory authorities, and other stakeholders to ensure project requirements and standards are met.

Quality Assurance and Compliance:

• Ensure that designs meet local regulations, safety standards, and best practices.
• Participate in audits, inspections, and peer reviews of design work.

Project Management:

• Manage timelines, budgets, and resources for design deliverables.
• Support the preparation of technical reports and documentation.

Job Requirements:

• Bachelor’s or Master’s degree in Civil/Structural Engineering or a related discipline.
• Recognized professional engineering qualifications by the Professional Engineers Board of Singapore.
• A minimum of 10 years of relevant experience in civil/structural engineering, with at least 5 years focused on designing geotechnical works for deep excavation projects.
• Proven expertise in handling projects of a similar size and complexity.
• Strong knowledge of geotechnical design principles, soil mechanics, and structural analysis.
• Proficiency in relevant design software and tools (e.g., Plaxis, AutoCAD, STAAD.Pro).
• Excellent communication, leadership, and problem-solving skills.

Preferred Qualifications:

• Chartership or equivalent professional accreditation (e.g., PE, CEng).
• Familiarity with Singapore’s construction and regulatory environment.
• Experience with risk assessment and mitigation for geotechnical designs.

We are seeking a talented Mechanical Design Engineer to join our dynamic team. The ideal candidate will have a proven track record in designing mechanical systems and components, possessing strong analytical skills and a passion for innovation. You will be responsible for developing detailed designs and specifications for various mechanical systems, ensuring functionality, reliability, and manufacturability.

Key Responsibilities:

• Create and develop detailed designs for mechanical components and systems using CAD software (e.g., SolidWorks, AutoCAD, CATIA).
• Conduct feasibility studies and design reviews, ensuring that designs meet specifications and requirements.
• Collaborate with cross-functional teams (e.g., electrical, software, manufacturing) to integrate systems and resolve design issues.
• Perform simulations and analyses (e.g., thermal, structural, fluid dynamics) to validate design performance and reliability.
• Generate and maintain comprehensive documentation, including design calculations, specifications, assembly instructions, and parts lists.
• Evaluate and select materials and manufacturing processes for components.
• Support prototyping and testing of designs, analyzing test results and iteratively improving designs as necessary.
• Stay current on industry trends, technologies, and regulations to incorporate new knowledge into designs.
• Offer technical support during the manufacturing and assembly processes, addressing any issues that arise.
• Participate in project management activities, ensuring designs are completed on time and within budget.

Requirements:

• Bachelor’s degree in Mechanical Engineering or a related field; a Master’s degree is a plus.
• Minimum of [insert number of years, e.g., 3-5 years] experience in mechanical design engineering.
• Proficiency in CAD software (SolidWorks, AutoCAD, or equivalent) and experience with 3D modeling and drafting.
• Strong understanding of mechanical engineering principles, materials selection, and manufacturing processes.
• Familiarity with design calculation tools and simulation software (e.g., ANSYS, COMSOL).
• Knowledge of industry standards and regulations relevant to mechanical design.
• Excellent problem-solving, critical thinking, and analytical skills.
• Strong communication skills, both verbal and written, with the ability to work collaboratively in a team environment.
• Detail-oriented with a strong focus on quality and precision in design.

Preferred Qualifications:

• Experience in specific industries such as automotive, aerospace, consumer products, or heavy machinery.
• Knowledge of lean manufacturing and continuous improvement methodologies.
• Experience with project management methodologies and tools.
• Familiarity with product lifecycle management (PLM) software.

Description:

• Engage in projects focused on Environmentally Sustainable Design (ESD).
• Oversee initiatives that pertain to overall sustainability, decarbonization, and carbon advisory services.
• Deliver comprehensive energy assessments and compare energy usage against best practice guidelines and net zero strategies for master planning within Singapore and internationally.
• Offer cost-efficient solutions to project teams aimed at enhancing building performance, decarbonization, and sustainability efforts.
• Conduct research, review findings, recommend, and implement leading practices within sustainable building design and systems.

Job Requirement:

• Bachelor’s or Master’s degree in M&E, Architecture, building services, building sustainability or a related field
• At least 3 years of relevant experience in Environmental Sustainable Development (ESD).
• Strong project management abilities to effectively oversee and manage tasks, budgeting, and timelines.
• Collaborative team player who is eager to learn, share ideas, and support colleagues with their responsibilities as needed.
• Highly motivated and proactive individual with a strong interest in discovering innovative solutions.
• Extensive experience with computer systems and proficiency in MS Office applications.

• World-Class consultancy firm
• Design project experience

RESPONSIBILITIES:

• Responsible for Electrical Engineering services for the projects from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as mentor to new employees and provide technical assistance
• Advise engineers on the project administration and contractual issues
• Conduct technical discussion on common design problems
• Assist in maintaining high quality standards of design and construction
• To promote esprit de corps amongst employees
• Responsible to participate and support the Company’s SHEQ within their scope of duties

REQUIREMENTS

• Bachelor’s Degree in Mechanical or Electrical Engineering.
• Accumulated around 6 years of experience handling M&E Engineering ideally in semiconductor or construction projects

OTHER INFORMATION:

• Location: depending on Project
• Working hours: 5.5 Days
• Salary: To be Discussed based on experience (Salary will commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

How To Apply:

This position is an excellent opportunity for a dynamic individual. It comes with stimulating challenges that will mould your capabilities and reveal your potential.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: (R1875905), Achieve Career Consultant Pte Ltd EA Licence No. 05C3451) (BEP) by clicking the ‘Apply link’ /

or call your friendly Consultant, David, at 9271 7510 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We would like to inform that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at https://www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Responsibilities:

• Develop printed circuit board designs which satisfies the customer's requirements and follow customer’s established DFX guidelines

• Generate all data required for the fabrication, assembly, and test of printed circuit boards to aid in the downstream processes

• Library creation and schematic drafting in PADS

• Work from components placement to Gerber generation in PADS

• Design high dense PCBs for power supplies and microcontroller circuits

• Follow safety spacing and constraints for international standards like IEC60950, IPC9592B, etc.

• Generation of BOM, assembly drawings and fabrication drawings

• Gerber review using CAM350

• Work as a team with electrical and mechanical engineers

Requirements

• Diploma/Degree in Electrical & Electronics Engineering

• 3 to 5 years of experience in PCB design

• Minimum 5 years of PCB Design Experience for senior position

• Full-fledged experience in PADS Layout, PADS logic and CAM350

• Experience in single and multilayer PCBs up to 6 layers

• Working experience in SMPS is an added advantage

• Able to work independently and as a team

• Dynamic and excellent interpersonal skills

Job Description:

• Conduct equipment design & development work according to customers and internal specifications.
• Act as project lead to plan, organize and co-ordinate their respective project’s meetings to review design and ensure projects are kept to schedule.
• Maintain and control relevant documents related to R & D activities per requirements.
• Maintain, keep track and ensure Billed Materials is updated.
• Generate detailed 2D/3D drawings.
• Raise ECN for update of changes to design and drawings and follow up on approval and ECN flow.
• Provide technical support to process & production, supply chain & QA for review and trouble-shooting of design and drawings.

Requirements:

• Bachelor’s degree or master’s degree in mechanical engineering or relevant disciplines.
• At least a minimum 4 years of relevant experience in semiconductor or automation equipment design. Candidate with more years of relevant experience would be considered for Senior position.
• Proficient in Microsoft Office applications (Words, Excel, Powerpoint) are required.
• Strong understanding of mechanical engineering principles and engineering techniques are required.
• Plentiful experience of mechanical designs using Solidworks is preferred. Candidate with Autodesk/Auto CAD Software will be an advantage.
• Solid knowledge and experience in material properties are required for Senior position.
• Good communication, time management, problem-solving and decision-making skills are required for Senior position.
• Willing to travel for overseas projects if required.
• Basic salary commensurate with experience.

We regret to inform that only shortlisted candidate(s) will be notified.

- Designing electrical system

- Ensure designs meet industry standards and regulations

- Knowledge of design techniques

- Prepare technical documentation and reports

- Responsible for producing schematic drawings

- Proficiency in electrical design software (e.g., AutoCAD, Solidwork)

- Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.

- Assist and collaborate with other project team members to comply with project requirements and meet project schedules

• Attend User / Client meetings acting as technical lead in regard to project management as required.
• Conduct internal training to staff for pre-sales engagement and ensure knowledge transfer of design methodology, cost modelling, etc. to employees.
• Manage each phase of the project from design to completion and ensure efficient use of resources and enhance cost-effectiveness.
• Supporting new business venture overseas
• Propose design concept.
• Summarize design requirement.
• Analyzing existing facility
• Conceptual sizing/design
• Risk analysis by checking consistency between tender and quotation specification.
• Prepare supplemental material (Spec, DWG) for quotation.
• Review BoQ (Material and quantity)
• Propose Value Engineering and technical review.
• Prepare presentation material for tender interview.
• Provide audit and consultancy services.
• Vigilant system support (for Mechanical Engineer)
• Site survey
• Draft proposal document
• Provide technical support.
• Provide CFD simulation report (for Mechanical Engineer)
• Project Management for new construction and D&B project in design phase working directly with clients, consultants, statutory authorities, and contractors.
• Leading or facilitating the design review meetings and design workshops.
• Feasibility study
• Assessment of mission critical building
• Concept & schematic design
• Summarize design requirement.
• Analyzing existing facility
• Schematic design report
• Design development (Spec., technical calculation sheet)
• Propose new, feasible innovation and stay abreast on the latest trend in the market.
• Product differentiation
• Detail design
• Arrangement of shop drawing with drafter
• Authority submission arrangement with QP
• Input for T&C requirement (prepare test script and ensure that the methodology is in line internally)
• Design Coordination with other discipline.
• Review of construction material / shop drawing / MoS
• Shop drawing coordination with sub-con/vendor & other stakeholders.
• Periodical inspection (internal check for quality improvement)
• Ensure site installation works are accordingly to project plans / designs / time frame.
• T&C consultation for FAT, SAT, and IST with Technical & Q&C department
• Handover submission arrangement with drafter team and project team (As build DWG)
• Required to learn and adopt working in Cloud, Design Collaboration and Model coordination and QA/QC own work.
• AutoCAD & Revit experience with Cloud Work-sharing (ACC) is desirable.
• Depending on project need, this position may be located On-Site or Off-Site and requires frequent travel to the project site.
• Any other duties assigned by Senior Manager

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Driven by the passion to improve quality of people’s lives, WS Audiology continues to grow as market leader in the hearing aid industry. With our commitment to increase penetration in an underserved hearing care market, we want to accelerate our business transformation in order to reach more people, more effectively.

We are hiring a Mechanical Design Engineer to be a part of our Behind The Ear (BTE) Development team.

What you will do

Design Engineer for new full BTE Hearing Aid projects:

• Design, develop and validate BTE Hearing Aids
• Implement new technologies or concepts into BTE Hearing Aid design
• Utilize various tools of specialization (CREO/ DFM/ DFMEA/ Tolerance Analysis/ Simulation etc.) to design, validate and improve existing designs
• Create and maintain BOM

Design Engineer for new Forefront projects:

• Lead forefront projects to ensure enhancement of technology for future hearing aid generations
• Perform forefront ideas/concepts with suppliers and/or Institutions
• Analyze competitor's product to learn good practices/design

Product Maintenance and support:

• Performs technical analysis related to process/design problems
• Supervise and follow up on support activities (Trial runs, FA approval, etc.) for timely processing of ECRs/ECOs

What you bring

• Bachelor's degree in Mechanical Engineering
• 2-5 years of relevant working experience designing plastic/metal/rubber parts in product design
• Experience in Tolerance Analysis, DFM and DFMEA

Who we are

At WS Audiology, we provide innovative hearing aids and hearing health services.

Together with our 12,000 colleagues in 130 countries, we invite you to help unlock human potential by bringing back hearing for millions of people around the world.

With us, you will become part of a truly global company where we care for one another, welcome diversity and celebrate our successes.

Sounds wonderful? We can't wait to hear from you.

WS Audiology is an equal-opportunity employer and committed to creating an inclusive employee experience for all. Regardless of race, color, religion, national origin, age, sex, gender, gender identity, gender expression, sexual orientation, marital status, medical condition, ancestry, disability, military or veteran status we firmly believe that our work is at its best when everyone feels free to be their most authentic self.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Responsible for planning and monitoring schedule for all projects.

Work closely with drafters and peform quality check of all drawings before production on site.

Prepare precast profile drawing to comply the authorities requirment and standards.

Liaise with Project teams, auhorities, client, architects and various contractors to ensure project work is carried out smoothly Conduct site inspection and coordination on site

Requires hands on design with detailed experience in 3-D environment, Experience in structural detailing seamless from 3-D mathematical design analysis to 3-D reinforcement detailing with the aid of Telka TSD and TS models etc.

Keen in 3-D modelling designs by using Tekla software.

• Reports to the Design Manager
• Review/Develop design drawings and documents in accordance with project requirements
• Coordinate all design related matters and participate in regular/ad-hoc meetings with Clients / Design consultants / Viaduct specialists / Subcontractor
• Monitor and update design schedule regularly
• Prepare & review shop/fabrication drawings for temporary/viaduct structure
• Support Design manager & lead in-house design engineer/drafter

Job Requirements

• Minimum Degree in Civil Engineering or equivalent
• Minimum 3 years of relevant experience of design & construction of bridge/ viaducts/ roads/ highways
• Candidate with experience in LTA (Road/MRT/Viaduct) is preferred
• Technical expertise and knowledge of concrete material & structure design
• Proficient in proposal for structural systems
• Proficient in AutoCAD
• Proficient in Structural Analysis Software (MIDAS, SAP, STAAD etc.)
• Good attitude towards work and timeline
• Independent, analytical and good interpersonal skills
• Location : Woodlands
• Project : Viaducts

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• Ensure the development of new products and the assurance of current products that are robust, reliable, top quality, with delightful customer experience in product usage.
• Define, develop, and contribute to innovation projects, including:
  • New product development
  • Introduce or evolve product test methods
  • Conduct field studies and experiments
  • Develop and prove the hypothesis with correlation studies/experiments
  • Process digitalization and automation
  • Data analytics and visualization
• Provide training to MPa or test partners to facilitate PQC (Pre-Qual check), SNV (Safety net validation), and System testing, as well as technical support if needed.
• Requirements of analysis; test planning, execution (functional & integration test for both apps and software), and reporting.
• A validation system was developed to assess the design holistically through the customers' lens.
• Conduct gamma testing on products nearing release, following defined test plans and scenarios.
• Collaborate with cross-functional teams, including developers, product managers, and quality assurance teams, to ensure issues are understood and resolved effectively.
• Other duties that may be determined by Management.

• Degree in Mechanical, Mechatronics, Electrical/Electronics, Computing, or any field of Engineering with programming/scripting skills.
• Minimum of 3 years of experience in reliability testing or a related role.
• Strong knowledge of electrical systems, components, and testing methodologies.
• Experience with electrical test equipment and instrumentation.
• Proficiency in data analysis and statistical tools.
• Excellent problem-solving and analytical skills.
• Strong communication and interpersonal skills.
• Ability to work independently and as part of a team.

Job Responsibilities:

a) Assist and support the Project Management team in project execution:

• Prepare shopdrawing and design calculation report such as cable sizing and etc

• Liaise with client on technical requirements

• Liaise with consultant or authority for the approval of design

• Provide technical support and advice on design and engineering to the project team

• Assist project team with technical advice to installation team

b) Assist and support the Business Development team in tender or proposal submissions:

• Conduct site survey and prepare feasibility study report

• Perform technical assessment such as Shading analysis PVSyst simulation, consumption analysis and etc

• Prepare tender documents for submission

• Prepare costing for commercial proposal

c) Familiar with Authority requirement and IEC standard or equivalent for renewable system installation

d) Maintain and update renewable system components list

e) Assist in the development and upgrade of engineering tools

f) Provide support for team members in other regions

g) Liaising with new and existing vendors/suppliers for price lists and up-to-date product and service information with the procurement team

h) Liaise with other teams to gather feedback on design and costing for continuous improvement

i) Ad hoc task assigned by the reporting officer

Job Requirements:

• Minimum Diploma/Degree in Engineering field (Electrical engineering background would be an advantage)
• At least 2 years of working experience in renewable industry
• Proficient in engineering drawing interpretation and adept at applying requirements to design effectively
• Familiar with Autocad, PVSyst and Sketchup
• Quick learner, goal-oriented team player with strong communication and troubleshooting skills

Are you a Mechanical Engineer with expertise seeking to make a valuable contribution to the success of a product?

Super Tomato is a company that offers a comprehensive range of automation services, including design, fabrication, and assembly, for our corporate clients. Our expertise lies in automation and robotics.

We are currently looking for a motivated and competent Mechanical Engineer to design our upcoming product.

As a Mechanical Design Engineer at Super Tomato, you will play a crucial role in designing our next product. You will be responsible for every stage of the process, from ideation and prototyping to design validation, manufacturing, and reliability testing.

Your task will be to solve a given problem statement and conduct research to 3D print, test, and eventually bring it for fabrication and final assembly.

Your experience with mechanisms will be critical as it is required in significant part of our projects.

This product will have a significant impact on the public, as it will be deployed in high-traffic areas. You will be able to build a robust portfolio and showcase your skills.

If you are shortlisted, we will invite you to our office for a physical viewing of the product.

Responsibilities

• Hands-on assembly
• Designing products from scratch
• Sizing of components
• Communicating effectively with the vendor
• Conduct thorough testing of designs
• Cost-down

Qualifications

Having prior experience in designing mechanisms is highly desirable for this position. In addition, if you possess experience working with systems that are involved in food handling, that would be a great advantage.

• Design and develop machine control software for automated semiconductor equipment.
  • Develop new process control software
  • Integrate software component or OEM equipment into a fully functional software system.
  • Demonstrate solutions by developing documentation, flowcharts and code comments.
  • Produce well organized, optimized, testable and efficient code for software released quality assurance.
  • Develop software solution by studying information needs, conferring with users, studying system flow, data usage and work process, investigating problem areas following the software development life cycle.
• Determine operational feasibility by evaluating analysis, problem definition, requirements, solution development and propose sequencing and coding solutions.
• Improve equipment performance by conducting system analysis, recommending changes in process/procedures.
  • Debug existing source codes and refine feature sets
• Support on-site installation and field service upgrading works.
• Tailor and deploy software tools and processes to resolve customer’s feedback, requirements or issues.

Skills and Qualification

• Minimum Degree in Mechatronics/Computer Science or Engineering.
• At least 4 years’ experience in programming on Windows (XP and above) environment.
• Proficiency with C++, VC++, MFC, SQL and OOP.
• Good knowledge in developing multi-threaded control software, equipment connectivity standard.
• Knowledge in designing GUI and familiarity with SEMI SECS/GEM, C# and WPF programming will be an added advantage.
• Strong analytical, troubleshooting and problem solving skills
• Strong general programming skills, software debugging and execute full lifecycle software development.
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.
• Excellent team player.

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

IC Designer, designing high frequency circuits targeting for transceiver applications, employing CMOS technology. The candidate needs to come up with novel architecture with speed, power, and area advantage compared to existing architecture.

The job also includes circuit design, pre and post-layout simulation, mask layout and PCB testing.

Qualifications

• Bachelor or Master degree in Electrical Engineering.
• Experience in EDA tools usage, including Cadence, Spectre, EMX, Synopsys, as well as Matlab.
• Some knowledge on communication system, such as BER, eye diagram, modulation/demodulation, pre-emphasis and etc.
• Open to Fixed Term Contract.