SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

We regret that only the shortlisted candidates will be notified

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control

· Develop & review electrical related drawings, e.g. Single Line Diagram, MCC Schematic, Equipment layout, Cable ladder/tray routing layout

· Knowledge in Onshore/ Offshore standards (IEC, NEMA, IEEE & API)

· Prepare Electrical Load Analysis & List

· Familiar with Short-Circuit and Voltage Drop calculation

· Prepare & review Electrical MTO for projects

· Review Electrical equipment’s datasheet

· Strong knowledge in Low voltage MCC/Switchgear, UPS, VSD/VFD & Transformers

· Prepare specification for LV Switchgear, MCC, Transformers & VSD/VFD’s

• Reviewing of customers' specifications and drawings
• Define specifications and scope of work to contractors
• Execution of projects.
• Startup, testing, commissioning and troubleshooting of plants.
• Develop engineering capabilities and work with sales team on project proposal and bidding

Requirements:

• Degree in Electrical Engineering or equivalent recognized by Professional Engineers Board (PEB) Singapore
• Able to read & understand line diagram and generate Bill of Materials from single line diagram
• Knowledge on control, schematics, motor controls and materials take-off
• Proficient in AutoCAD, Microsoft Office
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / vision
• Able to communicate effectively in English at all levels, both verbally and in written reports

An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate. We regret only shortlisted candidate will be notified.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Meet the Team

The IoT Digital team is a state-of-art IC design team focused on producing world-class Wireless MCU SoCs. The architecture specification, design, verification, and implementation of the Wireless MCU SoCs is the responsibility of the IoT Digital team. These SoCs include an embedded CPU system with analog and digital peripherals, advanced security, state-of-the-art power management, and best-in-class radios to support a wide range of wireless IoT applications and standards.

As Verification Engineer, you will be working closely with the IC Design, System, and Architecture teams to develop and execute the verification plan for the next generation of IoT chips.

Responsibilities

• Block and IP Verification
• Block-level verification to validate block performance and adherence to requirements
• Generate and execute verification plan based on specifications
• Architect and implement test benches using UVM-based constrained-random and formal methods
• Coverage definition, implementation, and analysis
• Formal Verification of mixed-signal IP integration, including real-number modeling
• SoC Integration and Verification
• Define, test and debug use cases for the SoC
• Verify and debug low-power design
• Flows and Methodology
• Improve flows and methodologies to streamline IP development and integration.

Skills You Will Need

Minimum Qualifications:

• Min. 5 years of IC design experience for senior positions. Open to junior candidates with strong foundation.
• Industry experience developing test benches and verification components with SystemVerilog and UVM is required
• Knowledge of scripting/language (Python, PERL, shell, TCL)
• Design/Verification skills such as Software/Firmware coding (C), SystemVerilog Assertion and coverage analysis, Low-power implementation (UPF), Mixed Signal Real Number Modeling (RNM, Spice)

Benefits & Perks:

You can look forward to the following benefits:

• Employee Stock Purchase Plan (ESPP)
• Insurance plans with Outpatient cover
• Flexible work policy

DUTIES & RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Able to relocate to Dubai for Project duration, minimum 6 months.
• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Scope:

• Lead the design and development of engineering projects, ensuring compliance with specifications and standards
• Collaborate with cross-functional teams, including manufacturing, quality assurance, and project management
• Create and review detailed design drawings and models using CAD software
• Conduct design analysis and simulations to validate performance and reliability
• Mentor and provide guidance to junior engineers and design team members
• Manage project timelines and deliverables, ensuring adherence to schedules and budgets
• Coordinate with clients and stakeholders to gather requirements and provide technical support
• Identify and troubleshoot design issues, implementing effective solutions
• Stay updated on industry trends and emerging technologies to enhance design processes
• Prepare technical documentation and reports for project milestones and reviews

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• Over 5 years of experience in semiconductor equipment design
• Strong knowledge and experience in:
• Design of automation or semiconductor equipment
• High-speed pick and place mechanisms
• Familiarity with 3D Computer Aided Design software
• Ability to plan, prioritize, and coordinate projects effectively
• Self-motivated and capable of independent work, with strong communication skills
• Equipment troubleshooting skills
• Ability to produce detailed mechanical drawings and apply Geometric Dimensioning & Tolerancing knowledge

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description:

As a Senior Design Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Scope:

• Design and develop mechanical systems, products, and components
• Create detailed technical drawings and specifications using CAD software (e.g., AutoCAD, SolidWorks, CATIA)
• Conduct simulations and analysis (e.g., stress, thermal, fluid dynamics) to validate designs
• Collaborate with cross-functional teams to integrate mechanical designs with other systems
• Perform design modifications and improvements based on feedback and testing results
• Develop prototypes and conduct hands-on testing to ensure design feasibility and performance
• Select materials, components, and manufacturing processes for product development
• Ensure designs comply with safety, regulatory, and industry standards
• Prepare and review technical documentation, reports, and presentations for stakeholders
• Support the manufacturing team in product assembly, testing, and troubleshooting
• Manage design projects, ensuring timelines, budgets, and quality standards are met
• Continuously research and apply new design technologies and innovations to improve mechanical systems

Requirements:

• ITE, Diploma, or Degree in Mechanical Engineering
• Minimum two years of experience in customized automation machine design
• Experience in semi-con, connector, or machine design preferred
• Knowledge of SolidWorks, with Pro-E and Inventor as added advantages
• Strong understanding of mechanical movement, function, and performance
• Good perception of 2D & 3D objects and machining processes
• Passion for designing high-performance machines

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

THE PERSON:

The ideal candidate should have a deep understanding of analog design and able to lead, attend and present at design review meetings with teams worldwide.

KEY RESPONSIBILITIES:

• Circuit design of wireline transceiver building blocks (PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer, etc.)
• Conduct peer reviews of circuit design and verification results
• Working with validation team to evaluate silicon results

PREFERRED EXPERIENCE:

• Extensive experience with high speed analog design with blocks like ADC, PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer.
• Experience with latest process technologies like 7nm or below Finfet technology.

ACADEMIC CREDENTIALS:

• Bachelors/Masters/Phd Degree in Electronic Engineering

LOCATION:

Singapore

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Job Responsibilities:

• Perform checks on the structural, architectural and M&E materials/works to ensure that the final touch-up works are ready for inspections.
• Conduct regular inspections to ensure works are in compliance with method statements (in accordance to BCA’s Good Industry Practice)
• Monitor the performance of subcontractor workers for all trades and ensure any defects are properly rectified
• Involved in preparing relevant QA/QC reports
• INvolved in implement QA/QC plans and ensure PPVC quality before delivery
• Ensure the functionality of the product before handing over to buyers
• Assist in preparing for QM submissions
• Assist in yearly ISO audits
• Assess, feedback on the construction process and procedures
• Execute quality control as per site specific materials and Works Quality Plan.
• Conduct relevant training for sub-con and internal staff.
• Issuance and handling of Site Memo.
• Monitor undertaken corrective and preventive actions against non-conformities.
• Arrange and liaise with BCA for CONQUAS/QM assessments.
• Recommends solutions for critical and/or frequent recurring defects to Project Team.
• Ensure all the method statement used has obtained approval from the clients and consultants.
• Follow-up all the required tests as per contract requirement.
• Attend regular site meetings – QAQC, Landscape Coordination Meeting and Client Meeting.
• Attend off-site inspection – Precast and Structural Steel Works (Malaysia and Singapore Factory)
• Follow the developer’s Quality Inspectors (QI) and Customer Service Officers (CSO) for inspection prior to building handover to owners.
• Attend to client ’s defects during Defect Liability Period.
• Assisting in handover of the common areas to management team.

Job Requirements:

• Min Diploma or Degree related to QA/QC or Engineering / Construction related field
• Prior experience related to construction industry (HDB, Condominium projects etc.) is added advantage
• Good knowledge of construction quality control/assurance is necessary

Senior Electrical Design and Commissioning Engineer (Marine Vessel Solution)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday - Friday: 8.30am to 6.00pm
• S$ 4,000 - 6,000

Key Responsibilities

• Electrical Design: Collaborate on system requirements, develop schematics, select components, and design control logic for marine vessel propulsion/control systems.
• Commissioning and Integration: Oversee installation, testing, and validation of electrical systems.
• System Optimization: Analyze performance, identify optimization opportunities, and implement innovative solutions.
• Documentation and Reporting: Create technical documentation and commissioning reports.
• Regulatory Compliance and Safety: Ensure compliance with maritime regulations, industry standards, and safety guidelines.

Requirements

• Diploma/Bachelor's in Electrical Engineering or related field
• Relevant experience in electrical design/commissioning (marine propulsion/control systems preferred)
• Proficiency in electrical design software (AutoCAD Electrical, EPLAN) and simulation tools
• Knowledge of marine electrical systems, industry standards (ABS, DNV, IMO), and regulations
• Requires to travel overseas for commissioning activities (shipyards/vessels)

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Halo Microelectronics, a developer of Analog and Mixed Signal Integrated Circuits enabling energy-efficient smart systems is looking for experiences Analog Circuit Design Engineers to join the Singapore Design Team.

Responsibilities:

* Transistor level design of Analog circuits, simulation, evaluation and characterization, system verification.

* Circuits design includes reference, amplifiers, drivers, LDOs, switching regulators or other mixed signal circuits.

* Coordinate with Layout Engineer in layout/mask design.

* Coordinate with application and product engineer, testing engineer to bring the products to production successfully.

* Work with application engineer and FAE to solve customers technical issues.

Qualifications:

* Strong educational or industrial background in Analog Circuit Design.

* Experience with bipolar and CMOS IC design.

* Personal character and team building skills essential to enabling on-time delivery of devices.

* Ability to work independently

* Must demostrate good communication and interpersonal skills.

* Must be able to perform as a team member.

Job Description:

• To engage and establish good business relationships with existing and potential clients
• Respond effectively and promptly to all sales enquiries to ensure conversion into sales
• Coordinate sales effort with team members and other internal departments to ensure that sales orders are fulfilled
• Keep abreast of best practices and promotional trends
• Continuously improve through feedback
• To perform any other duties assigned by superior
• Provide good customer service and assistance to showroom walk-in clients

Requirements:

• Minimum 1 year working experience in the Bathroom, Building Material or Interior Design Industry
• Good communication and interpersonal skills
• Good team player and self-motivated individuals with a positive mindset
• Well groomed, friendly and engaging personality

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Project Coordinator

Salary: $3,200 - $4,000

Working Hours: Monday - Sunday, 6 days shift work 10.30am-7pm; If work night shift next day will come late hours

Working Location: Site (Islandwide)

Office Location: Ang Mo Kio Industrial Park

Job Scope:

• Able to manage projects independently
• Oversee project operations and liaise with clients, subcontractors and suppliers on project matters
• Ensure that project works are completed with respect to the scheduled dates
• Cost and quality control of projects
• Ensure that construction teams and sub-contractors adopt all necessary measures and comply with safety, environmental and other relevant legislation and requirements in the contract

Requirements:

• Minimum 2 year of relevant experience
• Familiar with building plans submission procedures and approvals
• With valid class 3 license will be an advantage

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

☑ Basic $4000 - $6000

☑ Permanent role + High Variable Bonus.

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm )

☑ Tampines

☑ Class 1 MNC Builder

Responsibilities

• Prepare and modify precast concrete drawings (schematic, detailed, and production) to meet local standards.
• Design 2D/3D drawings, perform basic calculations, and resolve technical issues.
• Collaborate with clients, consultants, subcontractors, and participate in design meetings.
• Support junior team members and assist with tasks as needed.

Requirements:

• Diploma or Degree in Civil Engineering
• Min 1 -3 years of related experience with Precast Concrete Shop Drawing

Interested applicants are welcome to apply online with updated Resume/CV via Apply Now button or send your updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

Architectural Coordinator (Facade/interior design, A1 main con building)

Our client is an established A1 main contractor specializing in building construction and civil engineering projects. Their portfolio spans residential, commercial, mixed-use developments, and infrastructure projects, including MRT works. They’re now looking for Architectural Coordinators to join them for their building projects during an exciting time in their development.

Job Responsibilities

• Oversee the architectural aspects of a project from design development to construction completion.
• Work with the project team to develop and maintain timelines for project completion.
• Conduct and participate in site visits to monitor construction progress, address design-related issues, and ensure that the project is built according to plans and specifications.
• Provide technical guidance and supervision to junior architects and CAD technicians
• Identify and resolve design conflicts or discrepancies in construction drawings and work closely with the construction team
• Ensure compliance with all applicable building codes and regulations.

Requirements

• Degree/diploma in Architecture or equivalent
• Minimum 2 years of experience in architectural design and coordination.
• Candidates who possess façade/interior design experience will be highly desirable

Location: West

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Location: East-central

Industry: Interior Design – Office & Commercial Building

Our client is a leading corporate interior design firm specializing in creating dynamic, innovative, and functional workspaces. Our designs reflect the culture and brand of our clients, fostering environments that inspire collaboration, creativity, and productivity.

About the Role

We are seeking a highly motivated and experienced Senior Contract Manager/QS to join the team. In this critical role, you will lead all commercial aspects of the projects, ensuring their successful and profitable delivery. Key responsibilities include:

• Leading pre-contract negotiations and contract administration.
• Managing client & contractor’s relationships, including procurement and performance monitoring.
• Conducting cost analysis and preparing accurate cost estimates and budgets.
• Implementing cost control measures and managing project variations.
• Providing expert Quantity Surveying services, including value engineering and risk management.
• Resolving contract disputes and ensuring compliance with contractual obligations.
• Mentoring and developing junior team members.

Qualifications

• Bachelor's degree in Quantity Surveying, Construction Management, or a related field.
• Minimum 8-10 years of experience in contract management and QS roles within the interior design or construction industry.
• Proven track record in successful project delivery and cost control.
• Strong negotiation, communication, and interpersonal skills.
• Excellent analytical and problem-solving abilities.
• Proficient in relevant software (e.g., estimating software, project management software).

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

• Position : Procurement Executive (Interior Design / Fit out / Purchase Order/Project Costing)
• Location : Toa Payoh Industrial (Bus stop nearby)
• Working hours : 5 days a week - Monday to Friday from 9am to 6pm
• Salary (commensurate with experience) : Basic up to $3500 + Performance Bonus + 14 Days Annual leave
• Duration : Permanent
• Industry : Interior Fit-out Industry

Main Responsibilities:

• Implement procurement strategies, policies, and procedures.
• Identify and manage vendors, including contract development and compliance, and vendor performance
• Negotiate with suppliers on lead-time, cost and quality to obtain the maximum benefit for the company.
• Issue of Purchase Order, updating of Purchase Orders status and Project Cost updating.
• Exercises a good working knowledge of materials and sources of supply and makes purchases at prices consistent with quality and quantity requirements
• Other Ad hoc assignment by Superior.

Requirements:

• Knowledge of import and export regulations.
• Experience in vendor management and contract negotiation.
• Ability to work in a fast-paced environment and manage multiple projects simultaneously.
• Self-motivated and able to work independently with minimum supervision

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Description

• Prepare Tender Drawings, Shop Drawings, Construction Drawings, As-Built Drawings, etc.
• Prepare Drawings submission format, including title block, notes and legends, drawing to scale, etc.
• Attend BIM Coordination Meeting
• Support Project Team in managing RFI and making presentation using BIM-Model.
• To monitor, update drawing submission status including compilation and discuss with Project Team.
• All other ad-hoc tasks as assigned by reporting Manager

Job Requirements

• Certificate in Autodesk Autocad and Autodesk Revit MEP Advanced Module
• Diploma/Degree in Mechanical Engineering or equivalent
• At least 3-5 years of working experience in M&E using AutoCAD, Revit and BIM preferably from Construction Industry
• Ability to work independently and target oriented in a stressful environmen