Their duties and responsibilities include:

• Preparing and interpreting blueprints, technical drawings, and plans
• Collaborating with architects, contractors, and other construction professionals
• Planning, directing, and managing the site workforce and subcontractors
• Ensuring that all building procedures and materials comply with building codes, regulations, and standards
• Carrying out surveys and assessing the suitability of construction sites
• Performing quality control tasks on budgets, plans, materials, and the final product
• Inspecting and reviewing projects to monitor compliance with building and safety codes, and other regulations
• Assessing potential risks and drafting mitigation plans
• Providing technical advice and solving problems on site
• Ordering and managing resources and materials to meet project deadlines
• Preparing reports regarding job status and progress to stakeholders

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 3 years working experience on related sites

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 3 years working experience on related sites

Job Description

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 10 years working experience on related sites

-To Project management Coordinate with main-con and consultant for drawing submission, material sample submission and meeting with main-con and consultant

-Select appropriate electrical materials to complete designs such as MSB, Distribution lighting fixtures, cable tray layout, lighting and receptade layout, single line diagrams, CCTV, data Telcom operational routing diagram, ELV systems, control schematic and writing diagrams

-Identify discrepancies in tender/contract/IFC drawings and raise queries for clarification, A and A ( R and R) + Constriction Filed

- Attend all operational matters related to the daily running of the project and Handle multiple projects simultaneously

-Testing and commissioning for Electrical apparatus

-QA/QC documentation review of engineering deliverables

-LV and HV cables sizing calculations and prepare a bill of material

-Planning workforce arrangement and supervision and working planning

-Giving progress reports regularly to teams and monitoring project schedules

-Prepare Electrical shop and As-builts SLD Rcp drawing

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 10 years working experience on related sites

Leading provider of semiconductor equipment

Senior Design Engineer

Responsibilities:

• Manage mechanical design team

• Ensure mechanical design process meets schedule

• Conduct transforming, conceptualization and design review session with internal design team

• Continuous review, development, enhance and improve company products

• Provide technical support and solutions to products inquiry

Requirements:

• Degree in Mechanical, Mechatronics Engineering or equivalent

• Minimum 8 years of design experience in factory automation design

• Minimum 3 years in design supervisor experience

• Experience in semiconductor equipment handler will be an added advantage

• Analytical minded with strong organizational skills

• Proficient in using 3D software

• Able to effectively, interact with a variety of personnel at all organizational level and customers

Interested applicants, please email detailed updated resume in MICROSOFT WORD format and indicating your current salary and expected salary to:

[email protected]

David Lim

Principal Consultant/Manager

Registration No.: R1102027

[email protected]

FA Search Pte Ltd (lic no. 07C4794)

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description:

• Responsible in preparing documentation including daily report, monthly progress report, method of statement and work procedure to project manager.
• Responsible in overseeing drawing management and make sure the updated drawings to the clients and subcontractor are issued.
• Assist the project manager or senior project engineer in coordinate with related consultant and quantity surveyor on the change order issued
• Coordinate and work closely with safety personnel to ensure all government and safety regulation are complied.
• Conduct weekly or monthly meeting with sub-contractors to update the progress of work.

Job Requirements:

• Degree in Engineering is required/preferred
• minimum 3 years of Project Management knowledge, skills, experience.
• Good interpersonal and communication skill
• Good organization skill
• Able to multitask
• Able to work under fast paced environment

Maintain the existing PLC and SCADA system, and build the new system, and trouble shooting for the control system and control panel, and prepare the electrical single line drawing using AutoCAD, and coordinate with customer to understand customer's requirement. We will provide on site training, and hope the candidate willing to learn.

Element has an opportunity for an Engineer to join our rapidly expanding team in Singapore

In this role , you will perform variety of routine and non-routine testing assignments within civil testing operations and esure timely and accurate test results under minimal direct supervision

This role is based in Sungei Kadut Loop , Singapore.

Job Duties:

• Be accountable for accurate and timely release of testing data to customers and oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide input and support on business development opportunities with new or existing customers
• Provide formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assist in the professional development of novice technicians and engineers within the local laboratory and utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelors of Science degree in a science or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Objectives:

· Supporting refurbishment projects within the Domestic Business Management Division.

· Support and execute business expansion plan.

· Overseeing engineering processes, ensuring technical standards are met

· Collaborating with cross-functional teams to deliver projects in a timely and cost-effective manner.

· To support refurbishment projects and business operations in the Singapore region.

· Ensure project quality, and act as a bridge between Japanese headquarters and local teams, fostering seamless communication and collaboration.

Job Responsibility:

1. Project Support:

- Plan, execute, and monitor refurbishment projects within the Capital Area.

- Assist in the execution of key projects, ensuring alignment with Japanese business standards and practices.

- Monitor project progress and report updates to stakeholders, ensure schedules effectively.

2. Technical Expertise:

- Provide technical input on refurbishment designs, materials, and processes.

- Conduct feasibility studies and risk assessments for refurbishment projects.

- Ensure adherence to industry standards, regulations, and safety protocols.

3. Collaboration and Communication:

- Work closely with internal teams, including procurement, operations, safety and quality assurance.

- Prepare and present progress reports, technical documents, and proposals in English and Japanese.

- Strong in Business Japanese communication and written skills to communicate with executives in Japan regional offices.

4. Administrative Duties:

- Handle documentation, reporting, and correspondence related to assigned projects.

- Coordinate meetings, schedules, and travel arrangements as necessary.

- Ensure all activities adhere to local regulations and company policies.

Requirements:

- A bachelor’s degree in business administration, Engineering, or a related field is typically required.

- Minimum of 3 years of experience in a business or engineering-related role.

- Strong communication and interpersonal skills.

- Ability to manage multiple tasks and projects effectively.

- Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

Job Description

• Position: Senior Mechanical Design Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $7,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Responsible as the lead for the overall Mechanical engineering project activities.
• Responsible for optimized Mechanical engineering man hour utilization within the project.
• Coordinate between the other trades & internal for engineering integration.
• Coordinate with Project Lead on Project Engineering’s & Procurement Schedule.
• Prepare & Review Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities.
• Review Vendors’ Technical Specification/ drawings to ensure completeness & correctness with our requirement.
• Prepare & Review Equipment Parameter & Mandatory Calculation.
• Prepare & Review Piping Schematics (P&ID).
• Prepare & Review Machinery & HVAC Layout, Equipment Installation & Alignment.
• Prepare & Review Mechanical design and construction standard.
• Review 2D and 3D for piping detail and production design.
• Prepare & Review Testing Protocol & Operation Manual.
• Guiding and checking Mechanical engineer activities.

Requirements:

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of relevant work experience in marine/offshore industry machinery and piping new-building engineering design.
• Proficient in AutoCAD, Microsoft Office, and AVEVA.
• Knowledgeable about rules and regulations from Classification Society and Authorities.
• Familiar with the theory and calculations related to marine/offshore mechanical and piping design.
• Strong communication and analytical skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Senior Electrical Design and Commissioning Engineer (Marine Vessel Solution)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday - Friday: 8.30am to 6.00pm
• S$ 4,000 - 6,000

Key Responsibilities

• Electrical Design: Collaborate on system requirements, develop schematics, select components, and design control logic for marine vessel propulsion/control systems.
• Commissioning and Integration: Oversee installation, testing, and validation of electrical systems.
• System Optimization: Analyze performance, identify optimization opportunities, and implement innovative solutions.
• Documentation and Reporting: Create technical documentation and commissioning reports.
• Regulatory Compliance and Safety: Ensure compliance with maritime regulations, industry standards, and safety guidelines.

Requirements

• Diploma/Bachelor's in Electrical Engineering or related field
• Relevant experience in electrical design/commissioning (marine propulsion/control systems preferred)
• Proficiency in electrical design software (AutoCAD Electrical, EPLAN) and simulation tools
• Knowledge of marine electrical systems, industry standards (ABS, DNV, IMO), and regulations
• Requires to travel overseas for commissioning activities (shipyards/vessels)

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Job Descriptions:

• Position : HVAC Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $6,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Engaged in all mechanical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Participated in design and construction document preparation and submissions.
• Conducted technical review and clarifications with customer and suppliers.
• Coordinated design efforts with other engineering disciplines.
• Participated in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Monitor the progress of the document submission.
• Performed some drafting scope and also guide drafters for drafting.

Requirements:

• Minimum Diploma/Degree in Engineering or related field.
• Relevant job experience in oil and gas/process/marine industry preferred.
• Must have basic mechanical design knowledge.
• Proficient in performing HVAC cooling capacity calculations, pressure drop calculations, and duct sizing.
• Experienced in duct installation and HVAC system installation.
• Skilled in creating piping and instrumentation diagrams (PID), Airflow diagrams, and ducting and instrumentation diagrams (DID).
• Knowledgeable in basic pipe sizing, selection, and pipe installation.
• Familiar with basic fire suppression systems.
• Proficient in using AutoCAD for drawing and design.
• Proficient in MS Office applications.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Summary:

• Basic up to $4500
• Yearly variable bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in Solidworks
• Familiar with CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in Solidworks & CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Senior Design Engineer

5 days
9am-6pm
Kallang Ave
$5000 to $7000

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :
  1) Design of automation or semiconductor equipment
  2) High precision machine design
  3) Design of High Speed Pick and Place mechanisms
• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

On behalf of our hiring client who is an Original Equipment Maker (OEM), we are looking for a suitable candidate to join them as Product Design Engineer (Electrical).

Responsibilities:

• Provide technical support to the Project team, Installation on problem verification, report and coordinate with Group on job site issues and technical solutions related to electrical design.
• Involving in design interfacing and parts provision among Group of companies.
• Participate in the resolution of design problems related to Error/Trouble investigation, and formulate corrective & preventive measures.
• Provide engineering support to Sales Team for new products.
• Provide Maintenance Works Inquiry/Spare Parts Inquiry/Order Supports.
• Any other ad-hoc matters assigned by the Manager.

Requirement

• Degree/Diploma in Electrical Engineering with at least 2-3 years experience in electrical design work.
• Proficient in Auto CAD & 3D software is essential
• Fresh degree holders are welcome to apply

EA license : 22C0971 | EA Registration : R21101298

Location: East

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines.

This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations.

The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department of National University of Singapore (NUS) is looking for applicants for research engineer positions to support 3D-IC package fault localisation and failure analysis (FA) techniques with ANSYS High Frequency Structure Simulator (HFSS). The applicant will work closely with our researchers to understand and derive insights from scientific experiments and data. The applicant will also assist in the design and development of a physical test vehicle for the measurement of simulated results.

Responsibilities will include:

1. Contribute to defect classification and localization through simulation defect modelling.
2. Involve in 3D-IC forward predictive modelling (i.e. include chip and circuit blocks) by generating training materials.
3. Design of mock IC test vehicles for high frequency electromagnetic and DC magnetic field measurement and testing.

Qualifications

• A bachelor’s or higher Degree in Electrical, Electronics, Mechanical, Chemical Engineering, Physics, Material Science or its equivalent from a reputable University/Institute is preferred, or equivalent related experience.
• Candidate with experience in microelectronic research, characterisation, metrology, electrical testing, FA and strong in data analysis will have advantage. Knowledge of AI/ML/DL development and ANSYS/TCAD modelling.
• Strong analytical and problem-solving skills.
• Motivated and possesses effective communication skills including writing and presenting.
• Ability to work independently and collaborate within a diverse team.
• Open to Fixed Term Contract.

Permanent. 5 days. Alternate saturday 4 hr. Jurong

Our client

A very profitable decades old company specialised in machine automation, manufacturing equipment/manufacturing system design, calibration related products

Area of business: Global

Industry served: chemical, pharmaceutical, food

Abt the position:

Involved in full cycle mechanical design machine from conceptualization,designing, testing , commissioning.

Job scope:

1. Meet n discuss with client of the customized technical requirement.

2. To mechanical design n produce fabrication drawings for

(a) Material handling/ feeding / pick and place system, jigs and fixtures. (non static )

( b) Tanks and vessel design.(static)

(c )simple steel structure / process piping design

4. To perform equipment integration

5. To project manage

Requirement:

1. Diploma in Mechanical, Mechatronics Engineering or its equivalent.

2.Min 2 years experience in mechanical design manufacturing automated machine

Added advantage:

Mechanical design customized material handling equipment

whats on offer:

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

Work Location: Jurong

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Michelle Goh

EA License No : 22C1142

We regret that only shortlisted candidates will be notified.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Project Executive

Working Hours: Monday-Friday (9.00 am - 6.00 pm)

Working Location: New Industrial Rd [Bartley]

Salary: $2500-$3000 + Commission

Requirements

• Professional Certificate/Diploma/BS/BA or a related field of study
• 3-4 years of experience in account management, preferably in interior design / creative-led industry
• Must be able to read and edit autoCAD, SketchUp and other design softwares and site work is required.

Responsibilities

• Assist Project Director to manage the accounts of creative-led projects.
• Acting as the primary point of contact for clients, ensuring that their needs are met and their questions are answered in a timely manner
• Developing project plans and timelines, and ensuring that all project milestones are met on time and on budget
• Coordinating with other departments, such as design and production, to ensure that all project elements are delivered on time and to the client's satisfaction
• Preparing and presenting project status reports to the client and internal stakeholders
• Identifying opportunities for upselling and cross-selling to existing clients
• Ensuring that all project documentation is accurate and up-to-date
• Conducting research on the latest industry trends and best practices to ensure that our company remains competitive and innovative

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279