Job Description & Requirements

NACT Engineering provides drones accessories for all sizes and use-cases. Our intimate knowledge of robotics systems places us at the forefront of a burgeoning mechanical revolution. As a company at the cutting edge of engineering and robotics, we are looking for a suitable candidate that will push NACT forward as a bespoke drone solutions provider for our clients in the APAC region.

Highlights of working at NACT

• Close proximity to many amenties along alexander road
• Competitive compensation package remunerated based on skill and experience.
• High level of autonomy on the job with training opportunities provided for upskilling and learning
• Open culture and collaborative environment
• High growth industry

Job description

• Continuously update the IOT standalone GUI, and write manual documentation for the team to adopt.
• Work with electronics and full stack engineer to create a bidirectional data transfer, to create web based GUI to display robot product status
• Conduct troubleshooting of IOT controlled robotics system to verify the cause of failures, and assist in arriving at the corresponding solution.
• Ensure compliance with company programs procedures and applicable quality system regulations and standards.

Position Responsibilities

• Work on Single Board Computer to implement sensors and calculations to enable robotic functions
• Independently perform some level of failure analysis.
• Supports equipment development efforts for new products, and process improvements. These efforts may be the internal development of process equipment or coordination with an external equipment integration company.
• Supports processes. This support might include daily support of production operations as well as leading reliability and yield improvement activities for the IOT product.
• May be expected to work on complex problems where analysis of situations or data requires an evaluation of many tangible and intangible factors. Individual will be required at times to make complex technical recommendations on design quality and reliability.
• Writes Process Specifications and Manuals when applicable.
• Supports Return Merchandise Authorization process by providing root cause analysis report.
• Collaborates with Technical Experts from other software/hardware partners to implement new Product/ Process activities across the facilities following Technology Roadmaps and Design Engineering activities.
• Performs other position related duties as assigned.

Quality Responsibilities

• Reports any observed or informed process and/or product non-conformities.
• Finds resolution of Quality Situations at the area of responsibility.
• Complies with all the requirements in the operational procedures at the area of responsibility in order to meet the requirements of all applicable Quality System regulations.

Our Company is working closely with a Prestigious Public Listed organisation in Singapore. Due to our dynamic expansion in projects, we are looking for System Engineers to be part of the project team, who is able to maintain, upgrade and manage server system hardware and networks and in-house development environment software applications.

Resourcefulness is a necessary skill in this role. The candidate should be able to diagnose and resolve problems quickly. He/she should also have the patience to communicate with a variety of interdisciplinary teams and users.

Candidate must be able to perform routine rotation standby technical support to customer call and travel to customer site during silent hour (after working hours) to resolve operation issue.

Job Responsibilities:

• Install and configure software and hardware
• Manage network devices and technology tools
• Ability to understand overall system network architecture
• Monitor performance and maintain systems according to requirements
• Troubleshoot issues and outages
• Ensure security through access controls, backups and firewalls
• Upgrade systems with new releases and models
• Generate and maintain technical documentation, manuals and IT policies

Job Requirements:

• Proven experience as a System Engineer/Administrator, Network Administrator or similar role
• Experience and knowledge in VMware and SAN
• Experience with databases, networks (LAN, WAN) and patch management
• Knowledge of system security (e.g. intrusion detection systems), OS hardening and data backup/recovery
• Familiarity with various operating systems and platforms (MS Windows and Red Hat preferred)
• Resourcefulness and problem-solving aptitude
• Degree/Diploma in Information Technology, Computer Science, Computer Engineering or a related discipline

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to analysis of production lines to identify improvement, fostering cross-departmental collaboration for project implementation, and utilizing data analysis for management reporting. It involves optimizing automated production systems for efficiency, supervising personnel and machinery, and ensuring production targets are met.

Key Responsibilities

• Conduct in-depth analysis of production lines and promote cross-departmental cooperation to propose and implement improvement projects.
• Utilize data analysis for effective management reporting.
• Optimize and maintain automated production systems to enhance efficiency.
• Supervise personnel and machinery while driving the achievement of production targets.

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Computer Science, Industrial Engineering or engineering related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Responsibilities

· Should be well versed in Automation (Selenium with Java) / (Appium with Java), , Framework development or maintenance.

· Should be an expert in using Selenium – using Cucumber and POM Design Pattern.

Skills/Requirement

· Proficiency with programming in Java

· Knowledge of Data Driven Testing or Behavioral Driven Development test frameworks

· Experience developing Web and API test automation with: Selenium and JMeter

· Solid grasp on REST fundamentals, best practices, implementation concepts

· Skilled in Unix/Linux environments

· Capable of reading/writing QA tools in bash/perl/python

Interested candidates, who wish to apply for the above position, please send in your resume to: [email protected]

PERSOLKELLY Singapore Pte Ltd EA License No. 01C4394 EA Reg No: R23118975 (ABDUL RAHMAN ANSARI RAJA)

We regret to inform you that only shortlisted candidates will be contacted.

**********************************

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

**********************************

Job Description & Requirements

• Responsible to the Principal Engineer, Piping for the preparation of design as per codes / standards and client’s specifications, requisitions for materials, equipment, valves, etc., and for the timely completion of each planned engineering activity assigned to him / her.
• Review of piping specification.
• Review piping stress analysis calculation.
• Review and finalize of piping routing, piping arrangement and support.
• Review design data for missing and / or ambiguities information.
• Reporting project progress to Principal Engineer, Piping on a weekly basis.
• Implementation of Engineering Procedure, drafting Standards and Quality Management.
• Preparation of proposals / estimations for equipment and tankage works.
• Review engineering calculation and technical specifications of storage tanks, pressure vessels and various mechanical equipment.
• Evaluate vendor’s bids and highlight deviations and omissions to purchasing for further clarifications with vendor.
• Perform any other responsibilities as directed by immediate supervisor.

Qualification & Experience generally required

• Bachelor Degree in Engineering.
• Min 8 years relevant working experience in Mechanical engineering in oil and gas sector or offshore sector.
• Know to use spring hanger in stress analysis.
• Proficient in Microsoft Office products, AutoCAD and Caesar ll Stress Analysis Software.
• Prefer to have at least 5 year of piping engineering related working experience.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

As a Design Engineer, you will be working within a fast paced and exciting field with a dedicated inspiring workspace focused on developing products depending on advanced robotics and artificial intelligence technologies. Within Upstream Robotics you will be a crucial member of a dynamic team to help meet and exceed the requirements of our products and embedded technologies. You will be working closely with other engineers, designers, scientists, specialists, downstream teams and other cross functional teams to create and develop new technology, product formats and business cases for projects in our portfolio.

In summary:

• Designers will be expected to develop new product concepts and ideas from a blank sheet of paper.
• Produce working concepts for reviews with the use of handmade or prototype parts.
• Produce mechanical designs across a range of device types and technologies to deliver our product performance specifications while considering cost, manufacturing and time delivery.
• Be responsible for 3D CAD and design requirements of mechanical systems of mechanical systems from concept, through evaluation to downstream delivery. Take an active role in defining design specifications for a given concept.
• Analyse test results, summarise and communicate these with both technical and non-technical colleagues.
• Define plans, monitor progress and report to management on technical risks.
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.

About you

We are on the lookout for a dynamic and skilled Design Engineer to join our team. You will be enthusiastic about engineering and product design, bringing a robust technical foundation and a passion for developing innovative solutions. You take pride in your craft your craft and thrive in a fast-paced, collaborative environment. Key skills and attributes you will bring to the role include:

• A degree in a relevant engineering, product design, or science discipline or equivalent.
• At least 1-2 years’ relevant experience
• Sound understanding of basic mechanical/product design principles and the development of products and technologies through prototyping and testing.
• Proven ability to communicate through a variety of media.
• Ability to plan, prioritise and co-ordinate with work of others.
• Technical and personal credibility to work effectively in cross-functional design teams throughout the project development cycle.
• Basic knowledge and understanding of multiple tooling and manufacturing techniques.
• Proven experience of delivering creative design solutions that improve upon existing product designs.
• A creative and considered approach to problem solving, following clear design processes.
• Practical and methodical design development through hands on rig building, prototyping and testing.
• Ability to plan & prioritise tasks.
• Good commercial awareness with pragmatic approach to balance cost and value.
• A self-starter who thrives in a fast-paced, collaborative environment
• A passion for user focused design.

Installation Technician

Working Hours : 8:30am - 6pm (No OT)

Working Day: 5 days work (Tuesday-Saturday), If Monday required to work will be OT paid

$2000 - $2600 (Depend on exp)

Working Location: Paya Lebar [for installation will be at client place]

Benefits: 13th month + VB

Job Description

-Installing, servicing and maintaining of company product at customer place

-Willing to do hands-on work

-Work closely with other team mate to made work faster

-Perform any other ad-hoc duties as designed

Job Requirements

-Class 3 driving license is a must, and company vehicle provided

-Experience in renovation / electronic works / construction environment will be a PLUS

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

As a Senior Engineer in PDE (Package Development & Engineering) at Micron, you will be responsible for the Advance Packaging success within your scope (MRDA) and guided by functional objectives, in terms of process, equipment and materials definition, development and/or optimization. You will be managing and optimizing your area's performance to meet or beat defined metrics. You will apply extensive knowledge to carry out tactics and collaborate with internal and external partners to build and implement packaging technology roadmaps aligned to corporate strategic objectives. You will provide advice to senior management related to tactical decision for the function. You will interact with executives, major customers and/or site managers to provide consultation, influence decisions and identify and resolve critical issues.

Identify, select, and evaluate new process, equipment and/or technology to support current and future requirements for MRDA area

• Define, development and establish new process, equipment design and/or capability requirements aligned to Process and Packaging Roadmap
• Develop and engage creative solution for new process, equipment capabilities and/or solution to identified constraints or future technology requirements
• Work with equipment suppliers to develop new capability
• Actively participate in Package Development Engineering activities
• Conduct equipment benchmarking to establish the equipment suppliers and platforms for current and future need
• Create decision matrix for equipment and material selection
• Generates and set-up ADC, set-up/improve recipes
• Set-up PMON, Sampling Plans, BKM, CIP Strategies & performance indicators

Installation and qualification of new equipment platform and handover to production group

• Plan/submit capital request to acquire new Equipment
• Create purchasing specification (Doc2) document
• Establish the new equipment qualification criteria and activities roadmap with respective functional team
• Establish project handover requirements and procedures upon machine qualification
• Prepare documentation for handing over with respective site owner
• Conduct data gathering for low volume production
• Conduct training for Site representatives/personnel
• Establish the feedback loop for Continuous Improvement after mass volume production

Define, improve and/or maintain a matrix of key equipment platform capability and constraints (TOR - Tool of Records) on current and new equipment platform

• Maintain and regularly update the TOR, with inputs from local or other assembly site
• Maintain general knowledge of process and material characteristics and translate to equipment design requirement
• Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Collaborate with production group on upgrades of existing production equipment through continuous improvement projects

• Maintain knowledge of design constraints and weakness of existing platform
• Participate in the continuous improvement projects involving equipment improvement and upgrades

Job Requirements/ Qualifications:

• Bachelor or master’s in electrical engineering, Materials Science, Chemical Engineering, or related field. A PhD is a plus.
• 4 or more years of experience with proven track record of technical leadership in semiconductor manufacturing in Metro Real-Time Defect Analysis Process & Equipment Engineering. Experience in other Front-End areas, in Post Wafer Fabrication & High Bandwidth Memory technology
• Be able to comfortably work across organizational boundaries and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill
• Excellent communication skills

Keen on the role? Apply now!

Position Title: Service Engineer / Technical Specialist

Salary: $2,500 - $3,000

Working Days: Mon - Fri

Working Hours : 8:30 a.m. to 5:30p.m.

Working Location: Loyang

Responsibilities

• To provide support and application for Wafer Sort & Testing Related Equipment.
• Service & Calibration of Hi Vacuum Pumps and related equipment for the semiconductor industry.

Requirements

• NTC2 / Diploma in Electronics/Mechanical/Mechatronics Engineering
• Preferably with experience in Vacuum Technology and/or Wafer Testing.
• Training provided
• Travelling required.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Position title: Sales Engineer
Location: Loyang Way
Working Days: Mon - Fri
Working hours: 830 a.m. to 530p.m.
Salary: $3,000 - $4,500 (depends on experience)

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up to date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel:

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Location: Kranji (Near MRT, 5-minute shuttle bus)
Contract Duration: 6 months (with potential extension)

Key Responsibilities:

• Revise and review Standard Operating Procedures (SOPs)
• Review executed Master Batch Records (MBR) and Electronic Batch Records (EBR)
• Provide quality support and interpretation to the manufacturing team on quality-related queries and issues
• Participate in GEMBA and GMP walks for quality oversight
• Archive Quality Operations (QO) documents and support IQ/OQ activities
• Contribute to User Requirement Specifications (URS) and design specifications

Primary Job Objectives:

• Support the implementation and maintenance of quality systems
• Provide quality oversight for validation-related activities, including data integrity
• Ensure compliance with internal procedures and regulatory requirements, including FDA/EU cGMP and ICH guidelines

Requirements:

• Minimum of 2-3 years of experience in pharmaceutical/biotechnology quality assurance, manufacturing, or validation (preferably in multinational companies)
• A degree in pharmaceutical sciences, life sciences, biotechnology, chemistry, chemical engineering, or related fields. Certification in Quality Engineering or Validation topics is a plus
• Hands-on experience with equipment, process, cleaning, computer systems & shipping validation is advantageous
• Knowledge of FDA/EU cGMP, CFR 21 Part 11, and ICH guidelines is essential
• Strong problem-solving skills and ability to interact effectively with cross-functional teams
• Excellent verbal and written communication skills

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026

Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Responsibilities

• Develop Manufacturing/Operating Instructions and necessary Standard Operating Procedures
• Develop, maintain, and troubleshoot the process control system recipe/Models
• Investigate, report and troubleshoot findings on both quality and EHS-related issues observed during manufacturing or batch record review
• Develop, implement, and monitor robust preventive measures for processing issues
• Play a proactive role in ensuring the site safety and quality standards are adhered to
• Proactively monitor, identify develop, and implement improvements in processes and equipment
• Communicate regularly to the plant personnel on process updates
• Train the process technicians on the process and procedures as required.
• Ensure adherence to approved procedures and update the procedures as required, including the principles and practices of good data management (ALCOA) Focus on Safety and GMP Compliance as operations | priorities and as performance measures
• Accountable for Good Data Management and Date integrity understanding and performance
• Report and investigate actions or behaviors that may negatively impact the desired outcome of the GMP process or activity
• Own on or more multiple equipment/GMP ayotema in production and present the system overview with evidence compliance to internal and external auditors.
• Develop courses of action and drive the implementation of solutions
• Play an active and impactful role to deliver flawless execution for respective PCTs (eg APL, MS, 00, Leadership, Engineering) by updating performance against metrics, highlighting & resolving issues with appropriate escalations Work with the PCT to identify and drive improvement as per continuous improvement (Cl) goals of the PCT.
• Uphold code of conduct and values
• The senior position is expected to perform a coaching role to junior engineers and manage more complex manufacturing and operation issues. He/she is also expected to lead working teams managing projects to support manufacturing processes. Collaborate with cross-functional teams to drive flawless execution.
• Internal Stakeholders includes:
• Operation-for supporting the operation team to meet production targets in cycle time and output
• Supply Chain-for ensuring availability of raw materials for production and supply of finished products to the market, for qualification of alternate sources of material/consumables Quality for production batch release, and production investigation/improvement
• Engineering for equipment readiness and production investigation/improvement
• EHS-for performing safety review of changes in the manufacturing processes and safety related investigation
• Technical Services for product chemistry, process design understanding production investigation improvement and product transfer
• External Stakeholders Equipment Vendors and raw material suppliers-for new materials/equipment/consumables sourcing and during process investigation/improvement

TELE me at @yijingggggg or WA me at https://wa.me/+6598623556 NOW!

Interested candidates, please submit your resume to [email protected]

Alison Chen

Outsourcing Team

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

We invite candidates who have experience in designing office spaces to apply.

Job Description

• High degree of expertise in corporate interior space planning.
• Develop and execute high quality corporate office interior design concepts.
• Create and formulate design presentation strategies.
• Enjoy client-facing presentations with excellent client liaison skills.
• Oversee interior design process for entire project consistent with project timeline, budget and program.
• Ability to coordinate material and colour selection, interior construction administration and installation.
• To be able to muilti-task and enjoy working in a multi-cultural environment.
• Coordinate with all internal and external parties related to the project.

Requirement

• Minimum 10 years' experience in corporate interior design and interior achitecture.
• BS or BA in Interior Design, Interior Architecture or equivalent in experience.
• Possess excellent design flair, highly creative with a good eye for design details.
• Work with speed and meet project deadlines.
• Passionate about corporate office interior design and public spaces.
• Strong design portfolio in corporate office interior design.
• Excellent time management, organizational skills and communication skills.
• Highly efficient in AutoCad and Microsoft Office tools.

Seeking a full-time Research Assistant to join a team of researchers working to advance visual analytics in computer vision. Successful applicants will contribute to a research project that develops new techniques in image and video analysis.

Candidates should possess a strong interest in learning and researching state-of-the-art computer vision techniques, as well as a strong ability in coding and mathematics.

This position is ideal for individuals interested in pursuing an academically grounded, applied research career.

The candidate will be expected to:

• Understand basic machine learning and AI methodologies
• Code and run computer vision algorithms
• Contribute towards research conceptualization and methodology
• Assist in the preparation of manuscripts and reports for publications
• Collaborate and communicate research updates with both internal and external stakeholders

Skills and qualifications required:

• Obtained a Bachelors degree related to the computer science or mathematics
• Excellent written and verbal communication skills
• Strong programming skills.
• Proficiency with Python

How to apply:

Interested applicants are encouraged to send in their application with the following documents:

• Cover letter explaining your interest in the position and addressing the qualifications and skills requirements (1-2 pages)
• Curriculum vitae

Enquiries about the position can be addressed to Assistant Professor De Wen Soh ([email protected])

Appointment will be initially made on contract basis for one year, renewable subject to good performance and mutual agreement.

We regret that only shortlisted candidates will be notified.

Requirements:

1) Recognised Bachelor’s degree or equivalent in Structural Engineering, recognized by the Professional Engineer Board, Singapore.

2) Minimum 2-5 years of design experience in a consulting Environment

3) Strong engineering analysis and design skills and knowledge.

4) Competent in common engineering design software and analytical tools.

5) Knowledge of BIM and drafting for general Civil & Structural drawing is an added advantage.

6) Strong in structural and geotechnical principals and good knowledge of EURO codes.

7) Competent in conventional concrete and structural steel works design.

8) Good planning, organizational, writing and communication skills.

Job Description :

1) Assist and support Team Leader in the execution of projects as part of the project team.

2) Provide technical support in various stages of project, including conceptual design, design development, contract documentation, authority submissions, contract administration, site meetings, etc.

3) Participate in BIM coordination with the assistant of the BIM team.

4) Prepare schematic design, layout, calculations, technical reports and specifications, etc.

5) Conduct feasibility study, engineering assessment and prepare technical report. Liaise with clients, architects, contractors and suppliers to resolve project issues.

6) Carry out site inspections and technical reviews, when necessary.

7) Design management and participation in the successful delivery of projects.

8) Attend meetings, reporting and design matters.

9) Liaise with fellow Engineers and/or Consultant team.

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

As a Senior Design Engineer, you will be working within a fast paced and exciting field with a dedicated inspiring workspace focused on developing products depending on advanced robotics and artificial intelligence technologies. Within Upstream Robotics you will be a crucial member of a dynamic team to help meet and exceed the requirements of our products and embedded technologies. You will be working closely with other engineers, designers, scientists, specialists, downstream teams and other cross functional teams to create and develop new technology, product formats and business cases for projects in our portfolio.

Responsibilities include:

• Designers will be expected to initiate new product concepts and ideas and identify market opportunities from a blank sheet of paper.
• Be responsible for leading key pieces of complex technology/product sub-assemblies that help to define the specification of future products.
• Produce working concepts for reviews with the use of handmade or prototype parts.
• Produce mechanical designs across a range of device types and technologies to deliver our product performance specifications while considering cost, manufacturing, and time delivery.
• Be responsible for 3D CAD and design requirements of mechanical systems of mechanical systems from concept, through evaluation to downstream delivery. Take an active role in defining design specifications for a given concept.
• Use hand calculations and/or computer simulation to validate designs through the development process, backed up with lab-based testing / characterisation / validation.
• Analyse test results, summarise and communicate these with both technical and non-technical colleagues.
• Challenge and develop Dyson engineering practices to continuously improve design quality.
• Define plans, monitor progress and report to management on technical risks.
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.
• Influence - you’ll need to be able to convince stakeholders at all levels of the business.

​

About You

We are on the lookout for a dynamic and skilled Senior Design Engineer to join our team. You will be enthusiastic about engineering and product design, bringing a robust technical foundation and a passion for developing innovative solutions. You take pride in your craft your craft and thrive in a fast-paced, collaborative environment. Key skills and attributes you will bring to the role include:

• A degree in a relevant engineering, product design, science discipline or equivalent.
• At least 2-3 years’ experience
• Sound understanding of basic mechanical/product design principles and the development of products and technologies through prototyping and testing.
• Proven ability to communicate through a variety of media.
• Ability to plan, prioritise and co-ordinate with work of others.
• Technical and personal credibility to work effectively in cross-functional design teams throughout the project development cycle.
• Basic knowledge and understanding of multiple tooling and manufacturing techniques.
• Proven experience of delivering creative design solutions that improve upon existing product designs.
• A creative and considered approach to problem solving, following clear design processes.
• Practical and methodical design development through hands on rig building, prototyping, and testing.
• Ability to plan ahead, prioritise tasks and coordinate with the work of others.
• Good commercial awareness with pragmatic approach to balance cost and value.
• A self-starter who thrives in a fast-paced, collaborative environment
• A passion for user focused design.

Dyson is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our technology so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

Job Responsibilities:

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Job Requirements:

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Healthcare/Data Centre/LTA experience preferred
• Strong design experience in Fire Safety
• Minimum 6 years of relevant design experience
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

We are seeking an Engineer with Silicon photonics experience to work on photonics integrated chips design and engineering. The scientist will work on device design, photonic circuit and layout with commercial Si photonics fabrication and optical to electronic testing and measurements. In addition, engineer work on advanced packaging knowledge for chip integration.

Responsibilities

• Conduct research and development for Silicon photonics chips
• Design photonics integrated circuit
• Perform optical and photonics simulations and optimization
• Work with Si photonics foundry for fabrication
• Perform optical and electronic measurements

Qualifications

• PhD or Masters Degree in Science and Engineering, Physics or Applied Physics or related discipline to Optics and Photonics
• At least 2 years working experience
• Candidate is expected to be familiar with optical, thermal, multi-physics, and system simulation software (such as Ansys Lumerical, RSOFT, Zemax, and COMSOL) photonic layout software and understanding of Si Photonics fabrication
• Experience with optical and electronic test and measurements
• Commercial Si Photonics product design and product engineering is preferred

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

As a Lead Design Engineer, you will be focussed on developing products depending on advanced robotics and artificial intelligence technologies. Within Upstream Robotics you will be a crucial member of a dynamic team to help meet and exceed the requirements of our products and embedded technologies. You will be working closely with other engineers, designers, scientists, specialists, downstream teams and other cross functional teams to create and develop new technology, product formats and business cases for projects in our portfolio.

What we need you to do…

• Designers will be expected to initiate new product concepts and ideas and identify market opportunities from a blank sheet of paper.
• Be responsible for leading key pieces of complex technology/product sub-assemblies that help to define the specification of future products;
• Produce working concepts for reviews with the use of handmade or prototype parts.
• Produce mechanical designs across a range of device types and technologies to deliver our product performance specifications while considering cost, manufacturing, and time delivery.
• Be responsible for 3D CAD and design requirements of mechanical systems of mechanical systems from concept, through evaluation to downstream delivery. Take an active role in defining design specifications for a given concept.
• Liaise and collaborate with the suppliers to develop innovative, robust and scalable technology platforms.
• Use hand calculations and/or computer simulation to validate designs through the development process, backed up with lab-based testing / characterisation / validation.
• Analyse test results, summarise and communicate these with both technical and non-technical colleagues.
• Challenge and develop Dyson engineering practices to continuously improve design quality.
• Define plans, monitor progress and report to management on technical risks.
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.
• Own/contribute to team/department level initiatives & change projects.
• Influence - you’ll need to be able to convince stakeholders at all levels of the business.

About you

• A degree in a relevant engineering, product design discipline or equivalent.
• 5+ years’ industry experience
• Sound understanding of basic mechanical/product design principles and the development of products and technologies through prototyping and testing.
• Proven ability to communicate through a variety of media.
• Ability to plan, prioritise and co-ordinate your work, and others
• Technical and personal credibility to work effectively in cross-functional design teams throughout the project development cycle.
• Basic knowledge and understanding of multiple tooling and manufacturing techniques.
• Proven experience of delivering creative design solutions that improve upon existing product designs.
• A creative and considered approach to problem solving, following clear design processes.
• Practical and methodical design development through hands on rig building, prototyping, and testing.
• Ability to plan ahead, prioritise tasks and coordinate with the work of others.
• Good commercial awareness with pragmatic approach to balance cost and value.
• A self-starter who thrives in a fast-paced, collaborative environment
• A passion for user focused design.

Information:

1. Salary range: $4,500 - $6,500
2. Allowance: $250 transport allowance

Responsibilities:

• Source new business by contacting potential customers, decision makers and target accounts.
• Analyzing market strategies, deal requirements and evaluate options.
• Works with internal to close deals and establish long term working relationships with stakeholders.
• Establish relationships with customers/contractors to build pipelines.
• Ensure data is entry into CRM and project management system.
• Generate forecasts for budget & sales targets
• Collaborate with Sales team to assess engagement required from distribution to ensure closing the deal.
• Provides guidance for price and quotation strategy to distribution network.
• Support in strategic alliances to expand solution, products, services; and business networking.
• Provide Data Center related marketing and technical support to distribution partners and dealers
• Analyze sales and market data to provide relevant information to management.
• Present technical papers for marketing collateral, trade journals and conferences.
• Promoting Data Center power products and solutions, industry standards, design and integration

Requirements:

• Degree in Electrical/Mechanical/Mechatronic Engineering
• At least 8 years of relevant sales experience in Data Center segment
• Knowledge in power generation products and solutions.
• Able to present and negotiate with senior executives and decision makers.
• Able to commit traveling up to 50% frequencies

Interested applicants, send in your updated resume by clicking “Apply Now”

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

We are looking for a skilled Data Engineer with strong development skills to join our dynamic consulting team. In this role, you will play a key part in designing and building scalable, high-performance data pipelines and applications, while working closely with clients to understand their unique data needs and deliver tailored solutions.

This position requires a solid foundation in data preparation, backend development, and API integration, with a primary focus on Python and React.js for frontend. You will be involved in all phases of the data lifecycle, providing technical leadership, and ensuring successful project delivery through close collaboration with clients.

Key Responsibilities:

· Client Interaction: Lead client interactions, including requirement gathering, technical discussions, and workshops to clearly define project goals and data solutions.

· Data Pipeline Development: Design, develop, and maintain robust data pipelines to process, cleanse, and transform large datasets for various applications.

· Full-Stack Development: Build secure, scalable APIs and integrate third-party services, databases (SQL, NoSQL), and systems while contributing to the development of user interfaces using React.js.

· API Integration: Develop and integrate APIs for seamless data flow between systems, ensuring high performance and security.

· Data Preparation & Processing: Implement data preparation techniques to clean, organize, and structure raw data for analysis, ensuring data readiness for machine learning and AI applications.

· Emerging Technologies: Explore and gain hands-on experience with emerging technologies such as Large Language Models (LLM) and Retrieval-Augmented Generation (RAG).

· Cross-Functional Collaboration: Collaborate with cross-functional teams to deliver high-quality projects within agreed timelines, ensuring optimal data performance and security.

· Continuous Improvement: Stay updated with the latest industry trends and technologies to drive innovation in data engineering projects.

Requirements:

· Passion for Emerging Technologies: A strong interest in staying ahead of the curve with new technologies like Large Language Models (LLM) and Retrieval-Augmented Generation (RAG), with a desire to continuously learn and integrate these into client data solutions.

· Data Engineering Expertise: Minimum of 3 years of experience in data engineering, with a strong focus on Python for backend data processing and React.js for frontend interface development.

· API Development and Integration: Expertise in building and integrating RESTful APIs for data flow and system integration, with experience working with SQL and NoSQL databases.

· Data Preparation Skills: Strong understanding of data preparation, ETL processes, and transforming unstructured or semi-structured data into structured formats.

· Infrastructure and Cloud Knowledge: Solid understanding of infrastructure, cloud platforms (Azure, AWS, GCP, Alibaba Cloud), and familiarity with network and security best practices.

· Consulting Experience: Ability to engage with clients through requirement gathering, leading workshops, and providing technical solutions that align with their data-driven business needs.

· Agile and Version Control Skills: Familiarity with agile methodologies and version control systems like Git, ensuring smooth collaboration and project efficiency.

· Problem Solving & Communication: Strong problem-solving skills with the ability to communicate complex technical information effectively to both technical teams and non-technical clients.

· Client-Focused Approach: Ability to understand client needs and translate them into scalable, high-performance data solutions that deliver value and enhance user experience.

· Track Record: Proven experience leading technical projects, guiding the data development lifecycle from requirements gathering to deployment, while ensuring quality and client satisfaction.

Job Description

• Industry/Organization Type: Supply of Environmental Systems
• Position Title: Sales & Project Engineer
• Working Location: Boon Lay
• Working Hours: Monday – Friday, 8.45 AM – 6.15 PM
• Salary Package: Basic Salary up to $4,500 + HP Allowance + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and understanding clients’ requirements and assessing equipment needs, preparing and delivering sales proposals, technical presentations.
• Maintain relationships with suppliers and stakeholders.
• Provide continuous after-sales support such as aiding clients to identify problems with installed equipment (if any), recommending improved material, machinery or parts for replacement and maintenance.
• Direct and monitor daily activities to align the project progress and quality goals.
• Implement and adhere to the sales plan set by the manager with the aim of expanding the company’s customer base.
• Collaborate with team to compile information for tender submissions.
• Actively enhance personal knowledge of supplier’s products to introduce technology that adds value to the clients.
• Evaluate sales activities with the management weekly, including the status of prospective customers, plans to meet sales targets and status on deadlines.
• Collaborate with Sales Manager, producing reports regularly to communicate with supplier on sales activities and status of project.

APPLY NOW!!!

• Minimum Diploma in any engineering field.
• Candidates with at least 1 year of Sales experience will be advantageous.
• Candidates without experience are welcome to apply as training will be provided.
• With prior experience with tender systems such as Gebiz
• With Class 3 Driving License.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69796 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturer – Metal Stamping
• Position Title: Principal Tooling Engineer /Principal Engineer – Tool & Die
• Working Location: West (Transport provided at Boon Lay/Pioneer)
• Working Hours: 5 days (Mon – Fri, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $6000 + AWS Variable Bonus + $30 Mobile Claim
• Duration: Permanent Role

Key Responsibilities

• To lead the tooling team in problem-solving, identifying issues, and conducting root cause analysis.
• Analyze and improve stamping processes for cost reduction and quality enhancement.
• Investigate technical issues and analyze defects.
• Provide technical support to Sales and ensure tooling feasibility for customers.
• Lead cross-functional teams to streamline operations, reduce cycle times, and cut down on waste.
• Manage all documentation to comply with ISO9001, IATF16949, ISO14001, and ISO13485 standards.
• Enforce safety protocols and ensure a safe working environment while complying with industry standards.
• Develop and implement preventive maintenance plans to prolong tool life and reduce downtime.
• Promote a culture of continuous improvement using Lean Manufacturing and Six Sigma methods.
• Regularly monitor and report on key performance indicators (KPIs).
• Maintain detailed records of all tooling modifications and maintenance.
• Collaborate with Production, NPI, Quality Control, and Operations teams to optimize tooling effectiveness.
• Handle additional responsibilities as assigned by management.

APPLY NOW!!!

• At least 3 years of relevant experience.
• Minimum Diploma in Precision Engineering or equivalent technical qualification in Tool and Die making required.
• Strong commitment to safety and regulatory compliance.
• Proficient in Lean Manufacturing and process optimization.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69620 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/Organization Type: Design & Manufacture of Material Handling Systems
• Position Title: Project Engineer
• Working Location: Gul Circle (Transportation provided)
• Working Hours: Monday – Friday, 8.30 am – 5.30 pm
• Salary Package: Up to $5,500 + HP Allowance + VB
• Duration: Permanent

Key Responsibilities

• Manage and execute all phases of project delivery, encompassing engineering, scheduling, cost control, coordination, and on-site supervision.
• Prepare, submit, and keep track of all necessary project documentation and engineering records.
• Actively monitor project execution for timeliness and quality, promptly addressing and expediting any issues that arise to maintain progress.
• Coordinate with clients, subcontractors, consultants, and other related parties to ensure project specifications are met.
• Oversee the work performed by contractors to confirm adherence to quality standards and project requirements.
• Ensure customer satisfaction with the product delivered and the services provided.

APPLY NOW!!!

• Minimum Diploma in Mechanical Engineering or equivalent or with at least 2 years of relevant experience.
• Comfortable with working on weekends if required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68956 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114