• Design of control systems, instrumentation, cabling and cable support systems for Process equipment, Industrial Facilities and Commercial Buildings, with the support of a senior engineer if necessary;
• Design of Life Safety System comprising of Public Address Systems, Access control, Closed Circuit Television, Gas Detection and Fire Alarm systems with the support of a senior engineer if necessary;
• Design of Information Technology cabling system with the support of a senior engineer if necessary;
• Develop P&IDs, Instruments and IO list, Sequence of Operations, Logic Diagrams, Cause and effect matrices with the support of a senior engineer if necessary;
• Develop / Execute / Expedite ELV packages during design, procurement, construction phase of a project and taking responsibility for the assigned packages;
• Co-ordination and scheduling activities for the ELV supervisors on a project to ensure timely delivery at project milestone dates;
• Interfacing with other trades during design phase and incorporate their requirements into the ELV systems design;
• Technical Evaluation of vendor submissions including approval of shop drawings;
• Preparing the procedure for testing and commissioning of individual system and manage subcontractor during commissioning of the Extra Low Voltage systems;
• Guiding Designer / Draftsman for preparing cable routing plan, hookup drawings, wiring drawings, cable schedule, Junction Box schedule, Instrument Air manifold schedule, Block diagrams, P&IDs, Control System Schematic.

Requirements

• Minimum 4 years of relevant experience
• Good technical knowledge and understanding of Engineering Design and Construction for Basic Electrical Equipment and distributions concepts
• Basic knowledge of Project execution processes.
• Advanced knowledge of local code of practice of design implementation.
• Local construction knowledge

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

• Design of control systems, instrumentation, cabling and cable support systems for Process equipment, Industrial Facilities and Commercial Buildings, with the support of a senior engineer if necessary;
• Design of Life Safety System comprising of Public Address Systems, Access control, Closed Circuit Television, Gas Detection and Fire Alarm systems with the support of a senior engineer if necessary;
• Design of Information Technology cabling system with the support of a senior engineer if necessary;
• Develop P&IDs, Instruments and IO list, Sequence of Operations, Logic Diagrams, Cause and effect matrices with the support of a senior engineer if necessary;
• Develop / Execute / Expedite ELV packages during design, procurement, construction phase of a project and taking responsibility for the assigned packages;
• Co-ordination and scheduling activities for the ELV supervisors on a project to ensure timely delivery at project milestone dates;
• Interfacing with other trades during design phase and incorporate their requirements into the ELV systems design;
• Technical Evaluation of vendor submissions including approval of shop drawings;
• Preparing the procedure for testing and commissioning of individual system and manage subcontractor during commissioning of the Extra Low Voltage systems;
• Guiding Designer / Draftsman for preparing cable routing plan, hookup drawings, wiring drawings, cable schedule, Junction Box schedule, Instrument Air manifold schedule, Block diagrams, P&IDs, Control System Schematic.

Requirements

• Minimum 4 years of relevant experience
• Good technical knowledge and understanding of Engineering Design and Construction for Basic Electrical Equipment and distributions concepts
• Basic knowledge of Project execution processes.
• Advanced knowledge of local code of practice of design implementation.
• Local construction knowledge

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

My client is a well established local multidisciplinary consulting firm in Singapore.

Location : Central Area

Key Responsibilities:

• Design and implementation of civil and structural engineering solutions across a diverse range of projects, including commercial, residential, mixed-use developments, and infrastructure.
• Coordinate with architects, clients, and project stakeholders to ensure design objectives are met.
• Oversee technical project delivery, including design calculations, specifications, and ensuring compliance with local standards (Eurocodes, Singapore Codes of Practice).
• Provide technical guidance and leadership to junior engineers and drafters, ensuring design integrity and quality control.
• Conduct feasibility studies, risk assessments, and cost analysis for structural components.
• Collaborate with interdisciplinary teams to ensure the integration of innovative and sustainable engineering practices.
• Liaise with regulatory authorities for necessary approvals, ensuring designs are aligned with statutory requirements.
• Attend meetings with relevant parties to resolve technical issues.

Requirements:

• Bachelor’s Degree in Civil or Structural Engineering from a PEB recognized university.
• Minimum of 3 years of relevant design experience in Singapore.
• Proficiency in structural analysis and design software (e.g., ETABS, SAFE, STAAD, SAP2000).
• Strong knowledge of Singapore design codes and local authority submission procedures.
• Demonstrated ability to handle multiple projects and deliver within tight timelines.
• Excellent communication and interpersonal skills, with the ability to work effectively within multidisciplinary teams.
• Strong problem-solving skills.
• With experiences in HDB projects.

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

• Deliver sub-assemblies to production on time, cost and to specification.
• Develop detailed specifications and design requirements for interdependent systems
• Identify and design test requirements to replicate anticipated usage and optimise products to be robust and high performing.
• Build functional prototype products suitable for testing, review and demonstration
• Perform and review analysis on test failures and develop efficient solutions
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.

About you

• A degree in a relevant Engineering or Science discipline or equivalent
• 4+ Years of experience in a relevant role, working on complex and challenging technical problems
• A creative and considered approach to problem solving, following clear design processes
• A practical and methodical approach to design using an iterative development cycle of prototyping and testing
• Experience working in a 3D CAD design environment.
• The skills to communicate your ideas to others within your team and across a business
• A demonstrable desire to constantly improve yourself including evidence of self-development
• Knowledge and understanding of a broad range of manufacturing techniques

Dyson is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our technology so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

• A1 Main Contractor
• 5.5 Alternate saturdays (South of Singapore)
• Building Project

Our client is in the Civil & Infrastructure Contractor and has a strong presence globally. They are looking to fill the role of C&S Design Engineer

Responsibilities:

• Prepare technical reports, designs, and detailed drawings.
• Perform calculations for pressures, loads, and stresses.
• Assess the strength of construction materials and select them appropriately.
• Provide expert advice on safe construction and design practices.
• Secure planning permissions and ensure compliance with building regulations.
• Analyze the configuration of essential structural components.
• Oversee and inspect contractor work to guarantee structural integrity.
• Inspect properties to assess conditions and foundational stability.
• Utilize computer-aided design (CAD) software for simulations and modeling.

Requirements:

• Degree in Civil or Structural Engineering.
• Professional registration with the Institute of Structural Engineers.
• Proven experience in project management.
• Advanced knowledge of construction techniques, materials, and legal standards.
• Strong grasp of physics and mathematics.
• Ability to collaborate effectively with other professionals.
• Exceptional attention to detail and excellent organizational skills.
• Ability to work efficiently under pressure and meet deadlines.
• Excellent communication skills and proficiency in IT.

OTHER INFORMATION:

• Location: South
• Working days: 5.5 Days
• Salary: Up to S$7,500 / Negotiable and Bonus (salary will be commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction by providing attractive staff benefits, welfare & training programmes to all staff.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, David , at 6590 9958 or 9271 7510 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Job Responsibilities:

• Develop Low-Power Design Workflows:
  Own the design process to minimize power consumption while ensuring performance and reliability using advanced tools and techniques.
• Full-Chip Floor Planning and Routing:
  Lead floor planning and place-and-route efforts to optimize chip area and meet performance, area, and power goals.
• Power Network Design:
  Create and analyze robust power networks to ensure performance, minimize losses, and support low-power goals.
• Timing Closure and Signoff:
  Collaborate with teams to resolve timing issues and manage power and signal integrity for design verification.
• Physical Verification (DRC and LVS):
  Ensure compliance with layout and manufacturing rules through DRC and LVS for a tape-out-ready design.
• Cross-Team Collaboration:
  Work with engineers across functions to align designs with chip architecture and solve design challenges.
• Continuous Improvement:
  Stay updated on design advancements and improve workflows for better efficiency and low-power optimization.

Requirements:

• Educational Background:
  Bachelor’s degree or higher in Electronics, Computer Science, Electrical Engineering, or a related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience:
  Minimum X years in physical design with a focus on high-performance, low-power designs. Must have tape-out experience and familiarity with advanced semiconductor technologies (12nm and below).
• Technical Expertise:
  Proficient in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Strong knowledge of power network design, IR drop analysis, and timing closure with static timing analysis (STA) tools like PrimeTime.
• Software Knowledge:
  Experience with tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Experience:
  Hands-on expertise in place-and-route methodologies for optimizing performance, power, and area.
• Soft Skills:
  Excellent communication and collaboration skills to work effectively in multidisciplinary teams. Strong problem-solving and critical thinking abilities to address design challenges.
• Preferred Skills:
  Experience with advanced low-power techniques, deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, and design-for-manufacturing (DFM) principles.

Responsibilities:

• Responsible for the mechanical design and development of electronic automation equipment.
• Design and review projects to meet customer requirements.
• Work with Production department to optimize design to minimize error.

Requirements:

• Min. Diploma in Mechanical or Mechatronic Engineering
• 2 to 10 years experience in electronic automation equipment design
• Proficient in Solidworks software
• Knowledge of Pro Engineer software will be an added advantage

Interested applicants, please send in your detailed resume including your current & previous working experiences as well as current and expected salary to [email protected]

We regret that only shortlisted candidates will be notified.

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Job Description

• High degree of expertise in corporate interior space planning.
• Develop and execute high quality corporate office interior design concepts.
• Create and formulate design presentation strategies.
• Enjoy client-facing presentations with excellent client liaison skills.
• Oversee interior design process for entire project consistent with project timeline, budget and program.
• Ability to coordinate material and colour selection, interior construction administration and installation.
• To be able to muilti-task and enjoy working in a multi-cultural environment.
• Coordinate with all internal and external parties related to the project.

Requirement

• Minimum 10 years' experience in corporate interior design and interior achitecture.
• BS or BA in Interior Design, Interior Architecture or equivalent in experience.
• Possess excellent design flair, highly creative with a good eye for design details.
• Work with speed and meet project deadlines.
• Passionate about corporate office interior design and public spaces.
• Strong design portfolio in corporate office interior design.
• Excellent time management, organizational skills and communication skills.
• Highly efficient in AutoCad and Microsoft Office tools.

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

• Requires a BS in Electrical or Computer Engineering
• Some years of relevant experience is preferable
• Fresh graduates are encouraged to apply

Job Responsibilities:

• Lead Analog Circuit Design and Optimization:
  Direct the design and optimization of complex analog circuits, leveraging advanced schematic capture and simulation tools to achieve superior performance and reliability across diverse operating conditions.
• Drive Digital Standard Cell Library Development:
  Oversee the creation of high-performance, low-power digital standard cell libraries, ensuring alignment with stringent performance, power, and area specifications.
• Innovate Cutting-Edge Cell Architectures:
  Develop and implement advanced digital standard cell architectures, introducing innovative solutions to enhance design efficiency and meet evolving technological demands.
• Guide Layout Implementation:
  Provide strategic oversight to layout teams, ensuring accurate, efficient, and manufacturable physical implementations that adhere to performance and reliability goals.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s/Ph.D.) strongly preferred.
• Experience:
  10+ years in analog design and digital standard cell development, with expertise in deep sub-micron process technologies (12nm and below) and proven tape-out leadership.
• Advanced Technical Skills:Deep expertise in analog design, power optimization, and noise analysis.
  Mastery of tools such as Cadence Virtuoso, Spectre, and HSPICE for design and simulation.
  Extensive experience in digital standard cell library creation, optimizing for power, performance, and area.
  In-depth knowledge of deep sub-micron challenges, including layout optimization and power delivery strategies.
• Leadership and Communication:
  Demonstrated ability to lead cross-functional teams, mentor junior engineers, and foster innovation. Exceptional communication skills to articulate complex concepts and align multidisciplinary teams toward common objectives.

Title: Senior Staff Design Verification Engineer(SoC)

Location: Singapore

About the role:

Our client is a global Precision Semiconductor Manufacturing business. They are market leaders in the development of ultra-low-power semiconductor solutions globally.

The company aims to pushin the boundaries of energy efficiency and enabling a new generation of intelligent, always-on devices. Their focus on innovation and sustainability has earned them recognition in the industry and made them a trusted partner for many leading manufacturers.

Deepening its commitment to Singapore as a strategic hub to drive breakthroughs in product and technical innovation, they are looking to hire a Senior Staff Design Verification Engineer(SoC),

a Subject Matter Expert who is the critical point of contact in terms of ensuring a smooth flow of end to end verification plans for complex ultra-low power technology designs, supporting all phases of strategic development, from creating test plans and testbench to performing gate-level-simulations and participation in FPGA and Pre-silicon bring-ups in Singapore and beyond.

Responsibilities:
Reporting to SoC Engineering Director, and this position will be focusing on the below:

• Develop and execute comprehensive verification plans for complex SoC designs, ensuring functional correctness across all levels (block, sub-system, and full-chip).
• Possess a deep understanding of various architectures and confidently integrate third-party IPs and VIPs.
• Demonstrate expertise in both digital and mixed-signal verification methodologies, with a focus on low-power design and verification challenges.
• Utilize SystemVerilog (UVM) and other industry-standard verification languages to create robust test benches and verification environments.
• Collaborate effectively with design engineers and architects to define verification strategies, identify potential issues, and achieve optimal coverage.
• Continuously improve verification methodologies and stay up-to-date on the latest verification trends and tools.

Qualifications:

• Bachelor's degree in Microelectronics or Electrical Engineering or a related field (Master's degree a plus).
• Minimum 5-8 years of experience in the field of semiconductor design verification.
• Proven track record of successfully verifying complex digital and mixed-signal SoC designs.
• Strong understanding of low-power design principles and verification techniques.
• Proficiency in Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Makefile
• Technologies: ARM SoC (Preferred), AMB, AXI/AHB/APB, DMA, Flow Control, Serial Devices, QoS, MIPI(CSI/DSI), Crypto,OTP, DSP, Low-Power

Interested? Here’s what to do next:

Please apply to the role with a recent copy of your CV. We will be in touch once we review your profile for suitability.

Singapore Employment Agency License No.: 16S8069

Privacy Statement: By submitting an application and sharing your personal information with us, you consent to such information being collected, held, used and disclosed in accordance with our Privacy Policy (https://www.wilsonhcg.com/privacy-policy)

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Create comprehensive electrical circuit diagrams for automation and equipment systems.
• Assess, integrate, and validate hardware to ensure compliance with technical specifications.
• Produce CAD drawings depicting electrical circuits.
• Assist in diagnosing and resolving issues with system assembly, operation, and testing.
• Aid in equipment setup, problem-solving, and occasional installation.
• Provide assistance in testing new hardware and applications in-house.

Requirements

• Experience in automation machine design, proficiency in Electrical Design Software, electrical/electronic circuits and test instrumentation

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860

Only Shortlisted candidates will be notified

Quek Jian Wei

Reg No. R22110928

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694