Job Description:

1. Contribute to defining product specifications, microarchitecture, and implementation for high-speed memory interfaces.

2. Perform RTL coding, LINT checks, and initial testing of designs.

3. Collaborate with the verification team for debugging in the lab.

4. Work closely with the software team and/or customers to troubleshoot, debug, and optimize system performance.

Job Requirements:

1. Bachelor’s degree in Communications, Electronic, or Computer Engineering;

2. 6 of experience in ASIC design, with a strong understanding of the ASIC development process.

3. Proficiency in Verilog HDL coding and EDA tools for synthesis and timing analysis.

4. Experience with high-speed interfaces (e.g., DDR, SerDes, PCIe) is a plus.

5. Strong problem-solving skills and the ability to deliver results within deadlines.

6. Excellent organizational and communication skills.

Interested candidate please send your resume to [email protected]

Job Description:

1. Lead the team in designing, simulating, and documenting analog circuits and chip designs.

2. Oversee and optimize layout design and routing to enhance efficiency and quality.

3. Support product testing, debugging, and application development.

4. Mentor junior analog designers and prepare comprehensive design documentation.

Job Requirements:

1. Master’s degree or higher in Microelectronics or Electronic Engineering with over 10 years of relevant experience.

2. Expertise in designing analog mixed-signal circuit blocks, including bandgap references, bias circuits, LDO regulators, amplifiers, comparators, switched capacitor circuits, ADCs, DACs, oscillators, filters, Tx/Rx equalizers, and circuits like de-emphasis, CTLE, DFE, and CDR architecture, as well as high-speed digital components (serializers, deserializers, counters, dividers, etc.).

3. Proficiency in high-speed interface protocols such as PCIe, USB, SATA, DDR, and LPDDR.

4. Advanced knowledge of analog mixed-signal design, with experience in high-speed serial and parallel circuits using cutting-edge processes (e.g., 3nm, FinFET, SOI, bulk CMOS).

5. Extensive hands-on experience with design tools and static timing analysis tools (e.g., Nanotime).

6. Strong problem-solving skills and a proven ability to deliver results within tight timelines.

Interested candidate may send your resume to [email protected]

Piping Design Engineer

• Working Days: 5 days’ work week
• Working Hours: 8:15 am–6 pm (Mon-Fri)
• Office Location: Joo Koon
• Salary Range: S$ 2,500 - 3,500

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Responsibilities:
· Designing and detailing of Civil & Structural engineering works;
· Co-ordinating with clients’ representatives, Project Managers and Consultants Team from inception to completion of projects;
· Providing periodical site inspection and attending meetings during course of construction of projects; and
· Responsible for timely submission of reports and completion of projects for tender/submission with target dates.

Requirements:
· A recognised Degree in Civil/Structural Engineering by PEB;
· Minimum 1 - 2 years experience in a similar capacity;
· Procient in Civil and Structural Engineering software applications;
· Those with design experience will be an advantage;
· Positive attitude, self motivate and responsible;
. Fresh graduates are encouraged to apply.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Hi our Client is looking for a dynamic Chip Design Engineer to be part of their team.

Job Description

1. Design and implement high-speed memory interfaces and circuits.

2. Deliver AMS circuits in SerDes and evaluate circuit topologies.

3. Develop and optimize high-speed interface modules (e.g., bandgap, bias circuits,LDOs, ADCs, DACs, oscillators, filters, Tx/Rx equalizers, and serializers/deserializers).

4. Collaborate with the verification team to debug in the lab.

5. Work with software teams and customers to troubleshoot and enhance system performance.

Job Requirements:

1. Bachelor's in Communications, Electronic, or Computer Engineering;

2. Min 4 yrs working experience in ASIC design, with knowledge of the ASIC development process.

3. Proficiency in AMS circuit design and Electronis Design Automation tools.

4. Experience with high-speed interfaces (e.g., DDR, SerDes, PCIe) is a plus.

Interested candidate please email your resume to [email protected]

Job Description

As part of our system Engineering team, you play a key role in the design and development of our Inspection and Metrology machines. In your role you will work hands-on on the mechanical integration, process optimization and automation of the machine. Your work will involve integration of the mechatronic, optical and software building blocks and will hence work closely together with Mechanical design, Hardware, Optics and software teams.

It is your job to analyze customer requirements, build up a deep understanding of the problem and translate these into automated solutions that you detail clearly in measurable design requirements. To verify the solutions, you will build and test high-speed mechatronic setups for spec validation and critical parameter analysis. Once these are confirmed, you will coordinate the design and implementation in the different teams to eventually integrate tested modules and building blocks in the machine and assess the impact of the integration on the overall machine performance.

You get the chance to confirm high speed Pick and Place handling capabilities at key customers on site and broaden your customer and application know how along the way.

Furthermore you seek the challenge of understanding, analyzing, (re-)defining, and implementing sophisticated material handling flows until the level of detailed micro-sequences.

You will often write PLC level test sequences for mockup validation and data collection. Once the system is validated, translate these sequences into SW requirements.

As a senior system Engineer, you are considered as project/product owner. That means, besides technical work, you will also lead a multi-disciplinary team on project/product basis. You need to consider both technical but also commercial (e.g. budget, timeline, resource) aspects while managing your project/product.

Minimum Qualifications

• MS degree or BS degree with outstanding skill in electro-mechanical, electronics, software or mechanical engineering; with sound knowledge on basic software logics
• 5+ years relevant experience in an automation oriented engineering role in a high-end equipment company, covering most of following technical domains: machine conceptual and mechanical design, setting up specifications, PLC controller hardware and software design, user interface, SW (describing, testing of flows), conversion, test protocols, debugging, characterization, lead improvement projects
• Strong analytical capabilities
• Programming skills are a plus (PLC controllers, C, C++ Python, VBA, …)
• Independent thinking, challenging existing ideas and approaches
• Hands-on, self-organized, taking initiative and ownership
• Occasional travel within Asia & Europe
• Proficient in English

The ideal candidate will be responsible for all technical and engineering aspects of their assigned projects. They plan, schedule, predict, and manage all the technical tasks of their assigned project to assure accuracy, proper resources, and quality from start to finish.

Responsibilities

• Responsible for all technical and engineering aspects of their assigned projects
• Responsible to finish all tasks given by manager or top management on time
• Establish or design testing methods to monitor the overall quality of the project
• Collect and analyse project information to create status reports and recommend future actions
• Complete assigned project on time in full and coordinate with related department link to the project.

Qualifications

• Bachelor's degree or Diploma in Mechanical Engineering or equivalent experience
• Strong experience in AutoCAD, 3D Drawing (Autodesk Inventor, Solid Work, Pro E, similar)

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Able to assist in Costing
• Proficient in Autocad sanitary plumbing
• Candidate is proficient in Building Information Modeling (BIM)
• Knowledge in AUTOCAD (2D & 3D) & BIM drawing
• Plan, manage and execute design work, typically from concept through to completion and manage design changes during construction stages
• Plan all drawing request to meet the submission deadline
• On time delivery drawings, correct and accurate drawings
• Work closely with assigned PM on Autocad and Drawing Status reporting
• To attend site walk as and when required by the Engineers and Managers
• Ensure compliance with the relevant design codes and specifications

Requirements:

• Minimum 2-3 years relevant experience
• Positive working attitude, self-motivated and responsible
• Able to start work immediately
• Fresh graduates from ITE or Polytechnic are welcome to apply

Design Verification Engineer

Experience : 6+ Years

Salary Range :SGD 7000-10000

Skills Required:

FPGA SoC Verification Skills

ASIC SoC Verification Skills

System Verilog and UVM Skills

Automation Skills .

IP Verification Skills

Low power UPF based verification skills

Technical Expertise

Languages :Verilog, System Verilog, C, C++.

Verification Methodologies:UVM, OVM.

Scripting Languages:Perl,C-shell.

Simulators:Cadence IUS, Synopsys VCS, Verdi.

Protocols:PCIe,AGPT,CFDM,SPI,ISO7816,

DDR3, LPDDR2, GPIO, AXI, AHB, APB, JTAG, WDT, GPT.

• Analysis of project requirements and propose the solutions accordingly.

• Development of system technical specifications.

• Development of system architectures and integration with 3rd parties' systems.

• Technical interface with customers and other contractors.

• Realization of testing and commissioning works onsite.

• Network troubleshooting for wired and wireless systems both.

• Technical support to systems once into operation after commissioning.

• Onsite testing and commissioning.

Requirements:

•Tertiary qualification in Electrical and Electronics Engineering

•Minimum 6 years experience working on various communication systems technologies such as fibre-optic transmissions, digital trunked radio, public address and telephony, CCTV surveillance, access management and travel information systems.

•Experience in implementing railway-related projects.

Main contractor for LTA project seeking for the above position:-

5.5days work day per week

Junior Engineer (Design Dept).

• Prefer with experience in LTA MRT project
• Responsible and ownership attitude
• Like to work as a team
• Skill in autocad, Microstation will be advantage

Scope Of work:

• Coordination work with design consultant, contractors, clients & authorities
• In charge of planning (Road & Drainage diversion)
• Preparation of method statement and documents submission
• Establish & Maintenance of QA/QC procedure
• Supervison of contractor's / vendor's quality related site work
• Address site issue related to design.
• Manages timely submission & approvals from local authorities
• Manage & produce detailed design inclusive of calculations & drawings production in compliance with Eurocode/ BS code , ACI & ASCE for authority submission.

1. Undertake project management and product design works.

2. Provides customer support from product development to realisation.

3. Support cost study on machining and project works.

4. Handle all jigs and fixtures development works on machining jobs.

5. Represent company when dealing with subcontractors relating to hardware support.

6. Ensure safe operations and handling at all times

• Reports to the Design Manager
• Review/Develop design drawings and documents in accordance with project requirements
• Coordinate all design related matters and participate in regular/ad-hoc meetings with Clients / Design consultants / Viaduct specialists / Subcontractor
• Monitor and update design schedule regularly
• Prepare & review shop/fabrication drawings for temporary/viaduct structure
• Support Design manager & lead in-house design engineer/drafter

Job Requirements

• Minimum Degree in Civil Engineering or equivalent
• Minimum 3 years of relevant experience of design & construction of bridge/ viaducts/ roads/ highways
• Candidate with experience in LTA (Road/MRT/Viaduct) is preferred
• Technical expertise and knowledge of concrete material & structure design
• Proficient in proposal for structural systems
• Proficient in AutoCAD
• Proficient in Structural Analysis Software (MIDAS, SAP, STAAD etc.)
• Good attitude towards work and timeline
• Independent, analytical and good interpersonal skills
• Location : Woodlands
• Project : Viaducts

THE PERSON:

The ideal candidate should have a deep understanding of analog design and able to lead, attend and present at design review meetings with teams worldwide.

KEY RESPONSIBILITIES:

• Circuit design of wireline transceiver building blocks (PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer, etc.)
• Conduct peer reviews of circuit design and verification results
• Working with validation team to evaluate silicon results

PREFERRED EXPERIENCE:

• Extensive experience with high speed analog design with blocks like ADC, PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer.
• Experience with latest process technologies like 7nm or below Finfet technology.

ACADEMIC CREDENTIALS:

• Bachelors/Masters/Phd Degree in Electronic Engineering

LOCATION:

Singapore

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Mechanical Design and System Integration: Lead the mechanical design of UPW and

wastewater treatment systems, including the selection and sizing of equipment such as

process vessels, pumps, compressors, heat exchangers, dewatering devices, and other

mechanical components. Ensure seamless integration of these components into the overall

treatment system.

ØEquipment Specification and Procurement: Prepare technical specifications for mechanical

equipment and work with vendors to procure the required components. Evaluate equipment

proposals and make recommendations based on technical and budgetary considerations.

ØProject Planning and Execution: Collaborate with project managers and other engineering

disciplines to plan and execute UPW and wastewater treatment projects. Participate in project

meetings, design reviews, and progress assessments to ensure project objectives are met.

ØMechanical Engineering Analysis: Perform engineering calculations, simulations, and

modeling to assess the performance and reliability of mechanical systems. Address technical

challenges and propose solutions to optimize system performance.

ØQuality Control and Compliance: Ensure that all mechanical designs and installations comply

with applicable codes, standards, and industry best practices. Conduct quality control reviews

to verify design integrity and safety.

Ø Cost Estimation and Budget Management: Collaborate with the project team to prepare cost

estimates for mechanical components and equipment. Identify cost-saving opportunities

where applicable.

• Responsible for handling client and consultant, coordinate with consultants, client, and authorities for design matters.
• Assist in project planning, programming, implementation, monitoring, and coordination including quality, construction and cost management
• Oversee the shop drawings submissions and issuance, planning and control delivery of design schedule, monitoring the progress. Ensure projects are carried out according to approved drawings, specifications and standards, schedule and budget.
• Internal coordination with the construction and other departmental teams for their requirements, provisions.
• Manage a team of civil design engineers in design coordination & BIM Modellers

• Degree/ Master in Civil Engineering
• Minimum 10 years of Engineering experience with Degree in Civil Engineering recognised by PE Board
• Prefer with LTA project background
• Leadership

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

You will be a key product developer for our Counter-UAS products for the local and overseas markets. Working closely with the Solution Architect, Project Manager and Technical Lead, you will be part of a product development team to design and develop our RF sensing and jamming products as part of the Counter-UAS product lines.

Be Part of Our Success

· Plan, execute, monitor, and control the various RF designs of the products

· Well verse in RF link budget calculation

· Specialized in software defined radio technology to design, develop and optimized RF frontend systems for SDR applications

· Proficient with tools such as MATLAB, GNU Radio and SPICE simulator and other electromagnetic simulation software packages

Qualities We Value

· Experience in Windows server OS, Unix/Linux OS & VM environment

· Experience in product development

· Good knowledge with SDR, RF receiver and power amplifier designs

· Strong interpersonal and communication finesse

· Proactive problem-solving prowess

· Ability to adapt to evolving technologies and industry best practices

· Singaporean Only

· Location: Jurong East

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

THE ROLE:

We are looking for an adaptive, self-motivative design verification engineer to join our growing team. As a key contributor, you will be part of a leading team to drive and improve AMD's abilities to deliver the highest quality, industry-leading technologies to market. The Verification Engineering team furthers and encourages continuous technical innovation to showcase successes as well as facilitate continuous career development.

THE PERSON:

You have a passion for modern, complex processor architecture, digital design, and verification in general. You are a team player who has excellent communication skills and experience collaborating with other engineers located in different sites/timezones. You have strong analytical and problem-solving skills and are willing to learn and ready to take on problems.

KEY RESPONSIBILITIES:

• Develop/Maintain tests for functional verification and performance verification at the core level
• Build testbench components to support the next generation IP
• Maintain or improve current test libraries to support IP level testing
• Write tests, sequences, and testbench components in SytemVerilog and UVM along with formal to archieve verification of the design.
• Reponsible for verification quality metrics like pass rates, code coverage and functional coverage.
• Write testplan and review with design and architecture team.

PREFERRED EXPERIENCE:

• Strong experience in SystemVerilog and UVM verification framework.
• Experience Perl and Python scripts.
• Experience/Background on SerDes, PCIe, Ethernet.
• Experience with VCS, Cadence and Mentor Graphics.

ACADEMIC CREDENTIALS:

• Bachelors or Masters degree in computer engineering/Electrical Engineering

LOCATION:

Singapore

#LI-MM1

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Responsibilities:

• Prepares engineering information required for the production departments and to execute activities within schedule.
• Coordinates interdisciplinary and subcontracting activities where required.
• Reviews supplier / sub-contractors design deliverables.
• Prepares project documentation for submission and for production works using PLM
• Prepares design and production drawings such as main cable routings, cable tray layout, cable schedules, electrical diagram and etc.)
• Coordinates with other engineering team members (i.e. within shipyard engineering department, production, QC, etc.), subcontractors and consultants on technical issues
• Prepare outfitting material and electrical fittings for vessel to project technical requirement specifications
• Prepares arrangement and bill of material for outfitting and equipment supports for the procurement.
• Provides updates to production and project team members on all aspects engineering deliverables to support yard’s fabrication and installation activities

Requirements:

• Diploma in Electrical or Mechanical Engineering or any other related engineering disciplines
• Minimum 2 years of working experience in Electrical and Instrumentation design and/or engineering in the oil and gas industry
• Experience in electrical related design and marine vessels added advantage
• Proficient in engineering office software and CAD tools such as AVEVA or equivalent
• Able to work overtime where project has requirement.

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm