Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design.
• Min. 5 years of experience in CMOS Analog IC design and simulation.
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent).
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Senior/Design Engineer (C&S) (A1 main con, iconic building project)

Our client is a leading reputable A1 main contractor renowned for their impressive portfolio of iconic mixed development, residential and industrial building projects across Singapore. They’re embarking on an exciting new institutional building project in the CBD and are now looking for a Senior/C&S Design Engineer to join them during an exciting time in their development.

Job Responsibilities

• Provide technical expertise in the design and coordination of the civil and structural aspects of our construction projects.
• Work closely with project teams to ensure that all structural elements are designed to meet project specifications, regulations, and quality standards.
• Coordinate and liaise with relevant stakeholders to ensure the design complies with all requirement
• Prepare and present technical engineering reports, calculations, drawings, and specifications for project designs.
• Participate in the value engineering process to ensure cost-effective and efficient design solutions.

Requirements

• Degree in Civil/Structural Engineering, Construction Management, or related field
• Minimum 5 years of relevant building project/steel structures experience
• Possess knowledge of preparing construction sequencing drawings
• Experienced in resolving site issues too

Location: Central

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description

• Installation, commissioning, maintenance and testing of equipment.
• Compile field service reports after servicing of equipment.
• Provides product, service, or equipment technical and engineering information by answering questions and requests.
• Maintains product database, entering data.
• Maintains professional and technical knowledge.

Job Requirements

• Diploma in Electrical & Electronic Engineering or higher
• Strong interpersonal skill
• Good analyzing information and verbal communication skills
• Class 3 driving license

Additional Notes:

• Opportunities for overseas training and job.
• On the job training and Safety training will be provided.

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

The ideal candidate will have excellent creative thinking skills and be able to create designs based on conversations with a client. The candidate should be confident communicating regularly with the client in order to assess their needs and be able to adjust a given approach based on feedback. The candidate should maintain familiarity with the interior design landscape and trends in order to provide the best ideas for clients. If you’re inspired by creativity, teamwork, and the desire to bring unique visions to life, we’d love to meet you!

Responsibilities

· Understand and listen to clients' requirements to prepare tailored design proposals

· Develop creative and visually compelling designs and layouts for various projects

· Collaborate closely with external parties to ensure seamless site coordination

· Prepare presentations (3D, 2D,mock-ups and renderings) for clients

· Create quotes for clients and ensure full workflow is followed

· Stay informed about industry trends to maintain relevance and innovation

Qualifications

· Diploma or degree in a design-related field with 2-3 years of relevant experience

· Proficiency in AutoCAD, SketchUp and Microsoft Office suite; experience with other CAD suites is a plus

· Strong creative vision and excellent communication skills

· Proven ability to execute projects effectively from concept to completion

· Responsible, with a proactive and positive attitude

Job scope

• Develop mechanical design concepts and create 3D/2D CAD models
• Perform design validation through simulations and testing
• Select materials and optimize designs for cost and manufacturability
• Collaborate with cross-functional teams for integrated solutions
• Ensure compliance with industry standards and quality control
• Support manufacturing during design-to-production transition
• Maintain design documentation and implement continuous improvements
• Communicate with clients to refine requirements and provide technical support

Requirements

• Diploma/Degree in Electrical Engineering with 2-3 years of relevant experience
• Experience in designing and developing customized automation machines
• Proficient in writing PLC application programs (Omron, Allen Bradley, Siemens, etc.)
• Familiar with PC-based programming (Visual Basic, C++, etc.) for machine controls
• Hands-on experience with schematics and electrical layouts, and able to guide technicians
• Occasional travel required

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Your Role

• Work closely with a team of BIM Modellers in the design and coordination works
• Responsible for preparing construction drawings including shop drawings submissions and approvals.
• Supervise work progress on site, and liaise closely with consultants, sub-contractors and operation team
• Involved in tendering work

The Requirements

• Degree in Architecture with minimum 3 years’ relevant experience with a main construction firm
• Be able to read and understand construction drawings
• Has project experience in buildings / hotels
• Be meticulous, highly motivated and independent with excellent team spirit and interpersonal skills

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standards pertaining to project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents, and weekly update drawing register form documents controller and distribute to project Quality Assurance personnel.
• Administrates the project's internal quality audit to ensure compliance with the project quality plan.
• Monitors the inspection and documentation activities of the Quality Assurance Inspector to ensure compliance with the inspection test plan and project quality requirements
• Resolves quality-related issues arising from subcontractor and in-house production
• Ensures protection and preservation of various systems
• Ensures updates on electrical completion and mechanical completion progress in the project database
• Assigns the systems to be tested by the various supervisors and technicians involved in the operation
• Reviews the quality work processes to enhance efficiency and productivity
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, Quality Assurance Department, and vendors
• Reports non-conformance and issue improvement notes where necessary
• Any other assigned duties and responsibilities

Requirements:

• Degree in Naval Architecture, Marine and Offshore or Electrical Engineering
• Minimum 3 years of relevant experience in Quality Assurance working experience, and the offshore or marine industry

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsiblities :

• Responsible for environmental protection, safety and health, radiation protection and other new government announcements or revised laws and regulations.
• Responsible for the planning, reviewing and implementation of occupational safety and health management plan.
• Assist in the investigation of occupational accidents, and be responsible for external notification and declaration.
• Responsible for various environmental safety and health related Management Systems audits and inspections and tracking the gaps and recommendation for improvements.
• Responsible for the planning, reviewing and implementation of GHS, chemical classification management.
• Responsible for the audit of contractors, suppliers and licensed waste disposal companies.
• Responsible for the company's various environmental safety and health related education and training planning and implementation.
• Responsible for ISO 14001, ISO 45001, SS 651 and other management systems operation, maintenance and internal audit, and complete the external audit planning and execution.
• Responsible for the IH and Medical Monitoring program.
• Organize all Fire Drills and CERT related activities.
• Perform ISEP related project plan assigned by the management.

Job Requirements:

• A Degree qualification in a relevant discipline
• Min 2 years of relevant working experience in Semiconductor Environment,.
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure

About the client:

Our client is committed to harnessing the power of artificial intelligence to innovate and enhance their products and services to their enterprise clients. As part of an expansion plan, they are looking for a skilled and enthusiastic AI Engineer to join their growing team and work on exciting projects that push the boundaries of AI and machine learning.

About the role:

As an AI Engineer, you will play a vital role in designing, developing, and deploying AI models and algorithms that addresses complex challenges and drive business success. You will collaborate closely with data scientists, software engineers, and product managers to create new applications that will change the world.

Key Responsibilities:

- Develop and implement AI and machine learning models to develop state-of-the-art solutions

- Prepare and preprocess large datasets to ensure optimal model training.

- Conduct experiments to evaluate and refine the performance of AI algorithms.

- Stay informed about the latest trends and advancements in AI technology.

- Document processes, code, and results to ensure reproducibility and clarity.

- Engage in code reviews, providing constructive feedback to team members.

- Troubleshoot and resolve technical issues related to AI implementations.

Qualifications:

- Master’s degree or Ph.D in Computer Science, Engineering, Mathematics, or a related discipline.

- Strong background in AI and machine learning, with a solid understanding and hands-on experiences in algorithms and software engineering principles.

- Proficiency in programming languages such as Python, R, or Java as well as LLMs

- Experience with machine learning frameworks (e.g., TensorFlow, PyTorch, Scikit-learn).

- Familiarity with data processing tools (e.g., Pandas, NumPy) and database systems (SQL, NoSQL).

- Experience with deep learning techniques and natural language processing (NLP).

- Knowledge of cloud computing platforms (e.g., AWS, Azure, Google Cloud) for deploying AI solutions will be a bonus

If you are looking for fresh challenges in the new year and wants to work alongside some of the best engineers to drive meaningful projects that will impact the world, get in touch with us by clicking apply and we will be in touch!

STRUCTURAL ENGINEER

A world in crisis needing a different kind of thinking. At Whiby Wood Mills, we fuse design, engineering, and a systems philosophy to push the boundaries of what is possible. Join us and help reshape the industry by delivering impactful, high-profile projects. We are a dynamic, international, fast-growing group of enthusiasts based in Singapore, connected to a wider network of offices worldwide.

What you will do:

• Help to deliver transdisciplinary, holistic design for high-profile international projects.
• Design structures and structural components for complex projects.
• Learn to adopt systems thinking to resolve challenging problems.
• Carry out optioneering and optimization studies.
• Contribute to the preparation of design solutions, presentations, and reports.
• Participate in project meetings and being an active member of the team.
• Report to the team lead and collaborating in delivering design solutions.

What we look for:

• Knowledge of fundamentals of Structural Engineering.
• Positive attitude and eagerness to learn.
• Excellent communication skills.
• 2-4 years of working experience.
• Commitment to the team and the work.
• Knowledge of FE software.
• Preference for knowledge of Rhino and/or Revit.
• Interest in computational design and programming.

What we offer:

• A dynamic, fast-growing environment.
• Exposure to international projects.
• Collaborations with worldwide leading architects.
• Flexibility & competitive compensation.
• An excellent environment for professional growth.

How to apply

Attach your CV and portfolio/relevant documents showcasing why you are the right fit for the role, and when you are available to start. We look forward to receiving your application.

[email protected]

JOB DESCRIPTION

Report to Project Manager / Site Manager for the Arrangement of work

Liaise with consultants for the submission and approval of materials and shop drawings

Responsible for planning, programming and monitoring of work progress on site Co-ordinate the inspection work by Resident Engineer and clerk of works

Handling technical and engineering problems on site

Ensure site safety and proper execution of site work procedure on site

Monitor and co-ordinate the works of subcontractors Structure and Architectural work

Requirements:

Civil Engineer preferably registered with PE Board

Min 1 – 2 years’ experience

Job Description:

• Corporate with the constrcution manager to connect with various government acceptance departments.
• Corporate with the constrcution manager to supervise and manage the site to meet the various goals of the project.
• Corporate closely with subcontractors to monitor the progress of small towns and coordinate the work resources required by subcontractors to meet project requirements.
• Corporate with goverment personnel to conduct on-site inspections.
• Participate in weekly or monthly meetings with subcontractors to discuss work progress and corperate in preparing monthly meeting progress reports.
• Establish good relationships with all relevant parties.
• Corporate to ensure site safety and comply with the requirements of the authorities.
• Corporate to organize relevant physical and electronic documents on site engineer, etc.
• Other tasks assigned by the manager.

Requirements & Qualifications:

• Diploma / Degree or above preferably from a recognized University accredited with PEB, Singapore
• Experience with public residential projects would be advantages
• Proficient in Microsoft Office / Projects, AutoCAD
• Ability to keep a positive attitube in a fast-paced environment
• Good team player

Basic Information

• 5 Days : 8am - 5.15pm
• Basic up to $4.5k
• Working location at Joo Koon

Job Responsibilities:

• Ensure projects meet internal and client expectations for quality, budget, delivery timelines, and strategy, complying with Workplace Safety and Health (WSH) standards to avoid Liquidated Damages (LD).
• Monitor project cash flow, ensuring timely submission of progressive payment claims and managing budgets, cash flow projections, and cost variance reporting.
• Review and approve WSH documents (e.g., Risk Assessments, Method Statements, Safe Work Procedures, Fall Prevention Plans, Lifting Plans, Safety Management Systems, Permits to Work).
• Ensure all work is executed safely in compliance with approved safety standards.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified**

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

The role and responsibilities include, but are not limited to:

• To examine tender documents and the scope of work, then prepare Tender submission.
• To examine client’s requirements and the scope of work, then prepare quotation.
• To review, compare, analyse products and services to propose.
• To propose alternative products, as and where required.
• To prepare technical specifications.
• To maintain and update supplier information, and liaise on product ranges, prices, delivery times, etc.
• To do project management/co-ordination
• To assist with project documentations
• Any other ad hoc duties assigned by Manager.

Job Requirement:

• Min. Diploma in any fields. Engineering fields is added an advantage.
• Min. 3 years’ experience in construction industry
• Motivated to work in challenging, fast paced and result-driven environment
• Good communication and interpersonal skills
• Knowledge of lighting an advantage
• Knowledge of software an advantage, eg. Autocad, Photoshop, Dialux

To apply online please use the apply function:

(EA:17C8643 / R1766238 )

We are looking for a service engineer to support the preventive Maintenance on the Army Comms Equipment & Accessories. Must be able to perform Battery replacement, functional test and Air Leak test.

Responsibilities:

• To support the Preventive Maintenance on the Army Comms Equipment & Accessories.
• Must be able to perform battery replacement, Air leak Test and Functional Test and checking on Comms Accessories.

Requirements

• Diploma / ITC / NTC-2 in Electronics and Communications Engineering or equivalent
• At least 1-2 years of related working experience in Electronics and Communications Equipment
• Team player and able to work independently.

Other Information

• Good soldering skill will add an advantage