Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Descriptions:

• Position : HVAC Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $6,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Engaged in all mechanical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Participated in design and construction document preparation and submissions.
• Conducted technical review and clarifications with customer and suppliers.
• Coordinated design efforts with other engineering disciplines.
• Participated in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Monitor the progress of the document submission.
• Performed some drafting scope and also guide drafters for drafting.

Requirements:

• Minimum Diploma/Degree in Engineering or related field.
• Relevant job experience in oil and gas/process/marine industry preferred.
• Must have basic mechanical design knowledge.
• Proficient in performing HVAC cooling capacity calculations, pressure drop calculations, and duct sizing.
• Experienced in duct installation and HVAC system installation.
• Skilled in creating piping and instrumentation diagrams (PID), Airflow diagrams, and ducting and instrumentation diagrams (DID).
• Knowledgeable in basic pipe sizing, selection, and pipe installation.
• Familiar with basic fire suppression systems.
• Proficient in using AutoCAD for drawing and design.
• Proficient in MS Office applications.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Description

• Position: Senior Mechanical Design Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $7,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Responsible as the lead for the overall Mechanical engineering project activities.
• Responsible for optimized Mechanical engineering man hour utilization within the project.
• Coordinate between the other trades & internal for engineering integration.
• Coordinate with Project Lead on Project Engineering’s & Procurement Schedule.
• Prepare & Review Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities.
• Review Vendors’ Technical Specification/ drawings to ensure completeness & correctness with our requirement.
• Prepare & Review Equipment Parameter & Mandatory Calculation.
• Prepare & Review Piping Schematics (P&ID).
• Prepare & Review Machinery & HVAC Layout, Equipment Installation & Alignment.
• Prepare & Review Mechanical design and construction standard.
• Review 2D and 3D for piping detail and production design.
• Prepare & Review Testing Protocol & Operation Manual.
• Guiding and checking Mechanical engineer activities.

Requirements:

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of relevant work experience in marine/offshore industry machinery and piping new-building engineering design.
• Proficient in AutoCAD, Microsoft Office, and AVEVA.
• Knowledgeable about rules and regulations from Classification Society and Authorities.
• Familiar with the theory and calculations related to marine/offshore mechanical and piping design.
• Strong communication and analytical skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

about the company

My client is a leading manufacturer of digital electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career

about the job

• Design and realization of the chip floorplan, clock architecture and powerplan
• In charge of physical design tasks from netlist to GDSII (P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout)
• Lead analog designs during product development
• Physical design methodology of advanced process nodes and builds an automatic physical design platform

skills & experience required

• PhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics Engineering
• Min 4 years of hands on / research experience with digital backend ICs circuit design / physical design
• Well versed with synthesis, place & route, STA and design convergence
• Willing to work in a new start up entity in Singapore
• Proficient in tapeout experience at advanced technology will be a plus
• TCL,Perl,Python script development and familiar with EDA tool design

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• Kaki Bukit (East)

Your Responsibilities: -

• Generate mechanical drawings
• Coordinate with customers about requirements and feedbacks
• Ensure drawings are in correct specification and requirements
• Follow-up of assembly and installation work

You will need: -

• No experience required, traning provided

Apply now or email to [email protected]

Good luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 Recruit Lync Pte Ltd 22C1000

Our esteemed client, an established MNC, is searching for a QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

Job Highlights
Career progression opportunities.

Guidance by Experience Professional Engineers and company Directors to develop holistic competencies.

Involve in company operational and management processes.

Job Description

• Civil & Structural Engineering Design.
• Fire safety, Pollution Control and Singapore Statutory requirements design.
• Project execution & management.
• Company level operational processes and management.

Responsibilities

• Civil & structural and other engineering design.
• Manage Engineering team.
• Manage or support design teams.
• Project co-ordination or management.
• Involve in company level operational and management processes.
• Assist Company Directors in the performance of their duties.

Job Requirements

• Registered Singapore Professional Engineer or
• Civil Engineering Degree that is registerable as a Singapore Professional Engineer preferred.
• Candidates with BIM knowledge/experiences will be an advantage.

Additional Requirements

• Good knowledge of engineering design and project management.
• Effective communicator and motivated.
• Have broad vision and good sense of reality.

Visa is a world leader in payments and technology, with over 259 billion payments transactions flowing safely between consumers, merchants, financial institutions, and government entities in more than 200 countries and territories each year. Our mission is to connect the world through the most innovative, convenient, reliable, and secure payments network, enabling individuals, businesses, and economies to thrive while driven by a common purpose – to uplift everyone, everywhere by being the best way to pay and be paid.

Make an impact with a purpose-driven industry leader. Join us today and experience Life at Visa.

We are developing and executing a shared strategic vision for Loyalty & Marketing Services platforms and products that enable Visa to be the world-leading data-driven payments company. As a Data Engineer, you will be part of world-class team of Engineers to define, drive and execute on this vision. We are looking for a self-motivated individual with software engineering skills and expertise with Java, Web technologies & Big data. The candidate will be extensively involved in hands-on activities including POCs, design, development, testing, and documentation. Candidate must be flexible and willing to switch tasks based on team's needs.

Primary responsibilities will include:

• Design and develop mission-critical systems, delivering high-availability and performance
• Work on development of new products and enhancements to existing systems iteratively by building quick POCs and converting ideas into real products
• Work closely with architects, business and technical stakeholders to develop high quality products and services that meet business requirements and expectations while applying the latest available tools and technology
• Instill best practices for software development, and deliver high quality work on tight schedules
• Identify opportunities for further enhancements and refinements to standards and processes
• Coordinate Continuous Integration activities, testing automation frameworks, and other related items in addition to contributing core product code
• Present technical solutions, capabilities, considerations, and features in business terms. Effectively communicate status, issues, and risks in a precise and timely manner

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Basic Qualifications

• Bachelors degree, OR 3+ years of relevant work experience.

Preferred Qualifications

• 1 to 2 years of software development work experience along with a Bachelor’s degree, or 2+ years of work experience with an Advanced Degree in a technical field such as computer science, computer engineering, or a related field.
• Solid foundation in computer science with strong competencies in data structures, algorithms, and software design optimized for building highly distributed and parallelized systems.
• Proficiency in Java or Scala with strong design and coding skills.
• Hands-on experience with web technologies including Spring Boot, HTML, CSS, JavaScript, JSON, JQuery, and REST API.
• Practical knowledge of Angular.
• Working experience with Spring and Hibernate frameworks.
• Experience with Apache Spark is plus.
• Familiarity with Git/Stash, Ant, Maven, Jenkins, and Jira.
• Experience with database technologies like DB2, Oracle, SQL Server.
• Knowledge of Unix/Linux operating systems.
• Experience with Agile & DevOps methodologies.
• Excellent analytical and problem-solving skills with a strong automation mindset.
• Capability to handle multiple competing priorities in a fast-paced environment.
• Excellent written and verbal communication skills and the ability to effectively communicate logic and implementation plans to team members and managers.
• Self-starter, quick learner, and detailed and thorough.
• Experience in payment processing is a big plus.

Job Description

• Installation, commissioning, maintenance and testing of equipment.
• Compile field service reports after servicing of equipment.
• Provides product, service, or equipment technical and engineering information by answering questions and requests.
• Maintains product database, entering data.
• Maintains professional and technical knowledge.

Job Requirements

• Diploma in Electrical & Electronic Engineering or higher
• Strong interpersonal skill
• Good analyzing information and verbal communication skills
• Class 3 driving license

Additional Notes:

• Opportunities for overseas training and job.
• On the job training and Safety training will be provided.

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standards pertaining to project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents, and weekly update drawing register form documents controller and distribute to project Quality Assurance personnel.
• Administrates the project's internal quality audit to ensure compliance with the project quality plan.
• Monitors the inspection and documentation activities of the Quality Assurance Inspector to ensure compliance with the inspection test plan and project quality requirements
• Resolves quality-related issues arising from subcontractor and in-house production
• Ensures protection and preservation of various systems
• Ensures updates on electrical completion and mechanical completion progress in the project database
• Assigns the systems to be tested by the various supervisors and technicians involved in the operation
• Reviews the quality work processes to enhance efficiency and productivity
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, Quality Assurance Department, and vendors
• Reports non-conformance and issue improvement notes where necessary
• Any other assigned duties and responsibilities

Requirements:

• Degree in Naval Architecture, Marine and Offshore or Electrical Engineering
• Minimum 3 years of relevant experience in Quality Assurance working experience, and the offshore or marine industry

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsibilities:

• Lead Analog Circuit Design and Optimization:
  Direct the design and optimization of complex analog circuits, leveraging advanced schematic capture and simulation tools to achieve superior performance and reliability across diverse operating conditions.
• Drive Digital Standard Cell Library Development:
  Oversee the creation of high-performance, low-power digital standard cell libraries, ensuring alignment with stringent performance, power, and area specifications.
• Innovate Cutting-Edge Cell Architectures:
  Develop and implement advanced digital standard cell architectures, introducing innovative solutions to enhance design efficiency and meet evolving technological demands.
• Guide Layout Implementation:
  Provide strategic oversight to layout teams, ensuring accurate, efficient, and manufacturable physical implementations that adhere to performance and reliability goals.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s/Ph.D.) strongly preferred.
• Experience:
  10+ years in analog design and digital standard cell development, with expertise in deep sub-micron process technologies (12nm and below) and proven tape-out leadership.
• Advanced Technical Skills:Deep expertise in analog design, power optimization, and noise analysis.
  Mastery of tools such as Cadence Virtuoso, Spectre, and HSPICE for design and simulation.
  Extensive experience in digital standard cell library creation, optimizing for power, performance, and area.
  In-depth knowledge of deep sub-micron challenges, including layout optimization and power delivery strategies.
• Leadership and Communication:
  Demonstrated ability to lead cross-functional teams, mentor junior engineers, and foster innovation. Exceptional communication skills to articulate complex concepts and align multidisciplinary teams toward common objectives.

Job Scope:

You will assist the Transformation team in the following areas:

· Design internal comms content, e.g. EDMs, articles, infographics, bite-sized videos, etc.

· Publish and maintain the repository of the internal comms content

· Provide administrative and logistics support for staff well-being initiatives and staff engagement activities

· Perform tasks associated with the planning and execution of events

Requirements:

• Diploma holder and above
• Good communication and interpersonal skills
• Ability to work effectively as an individual and in a team
• Proficient in Microsoft Office applications e.g. PowerPoint and Word
• Proficient in graphic design, video editing software and have good knowledge of social media/design/communications trends
• Experience in video filming and event photography will be an added advantage

Salary: $11 to $18/hour

Location: Maxwell Road

Contract Period: 6 months

Working Hours:

Mon to Thurs: 8.30 am to 6pm

Fri: 8.30am to 5.30pm

EA License No: 96C4864

Reg. No.: R24121728

Job Responsibilities

· Inform Design Team, Cost / Commercial team of all client-led change proposals and instructions.

· To manage local consultants in the execution of design development.

· To assist in coordination between Design Team, Consultants, Operator stakeholders.

· Assist site team in resolution of site clashes.

· Participate in workshops and lead, manage the consultants as required in review and comment of shop drawings in terms of constructability, sequencing and ensure quality of he design aesthetic is maintained throughout.

· Follow through on design development of Concept, Schematic, Development and Construction Documentation for all projects where applicable.

· To attend and review Mock Ups.

· Conduct site and factory visits to ensure implementation and compliance with approved design intent and direction.

· Interfacing with internal and external Operations Management to ensure timely incorporation of operational requirements within the project design.

· Manage the design change process to ensure minimal impact to project schedule and minimize cost impacts as a result of such design change.

· To assist consultants and design team to complete and resolve any unforeseen interface problems throughout the various Design Phases.

JOB REQUIREMENTS

• Minimum 8 year’s working experience in Architecture Design Management of Hospitality would be preferred
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Architecture, Interior Design or equivalent.
• Possess good communications and people skills
• Good organization, coordination and leadership skills
• Required skill(s): design development, project management, construction.

Company’s profile
Julian Grey's client specialises in electrical engineering services, offering high-quality installation, design, and supply solutions.


Responsibilities:

• Submit designs, shop drawings, and calculations.
• Lead front-end engineering and feasibility studies.
• Assess design specifications for cost savings and technical improvements.
• Ensure seamless integration of services during project meetings.
• Manage the design approval process with all stakeholders.
• Report on design submissions and handle DAR submissions.
• Oversee testing and commissioning of high voltage systems and ISCS.
• Track design deliverables to ensure timely completion.
• Identify and mitigate design risks affecting project performance.

Requirements:

• Minimum Diploma in Electrical Engineering
• M&E experience in the construction industry

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities -https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Account Executive

Address: Redhill
Working days: 5 days Mon to Fri 9/10am to 5pm (can WFH 1-2 days per week)
Salary: $2500 to $3000

Requirements
Diploma in Accounting, Finance, or a related field.
2 years of full-set accounting experience.
Proficiency in accounting software (e.g., QuickBooks).

We are a start-up interior design firm looking for detailed-oriented and organized accounts executive to join our company.
We allow hybrid working arrangements and has a collaborative working environment.

Job Description:
Handle full sets of accounts including invoicing, receipt updates, vendor invoice processing, payment arrangements, journal entries, maintenance, bank reconciliation, balance sheet schedules, fixed assets registers, and general ledger
Manage day-to-day financial operations and monitor cashflow
Prepare and review gst submission and tax returns
Preparation of financial statements and assist in other related statutory filings required
Manage end to end payroll process, including preparation, calculation and disbursement of monthly salary/commission
Ensure compliance with all statutory requirements such as CPF, income tax and other relevant payroll tax obligations
Support general administrative task

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Our client is a leading construction company, specialize in marine engineering and land reclamation projects.

• Handle the design team to achieve targets for the Civil engineering, Geotechnical engineering, Infrastructural design works.
• Lead consultant and review their design to ensure to meet the relevant requirements and the project’s preference.
• Discuss the design results to the client and other stakeholders and obtain their agreement.
• Enhance the design to reduce cost and construction schedule effectively.
• Finish all design works including necessary approvals without adversary affecting the tender/construction schedule.

Requirements:

• Degree in Civil Engineering recognized by the PE Board
• At least 7 years of marine civil design experience in a large-scale project.
• Good knowledge in international and domestic standards for design work.
• Experience in marine structure D&B plant project and overseas ODA project is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

About Us:
At Luxx Newhouse Group, we specialize in providing premium engineered surfaces, including sintered stones, solid surfaces, and quartz. Our commitment to excellence is reflected in our end-to-end solutions—from supply to fabrication and installation. We are a dynamic and innovative company looking to expand our team with creative minds who thrive in a fast-paced environment.

Position Overview:
We are seeking a talented and passionate Product Design & Visualisation Intern to join our team. As an intern, you will collaborate with our product design and visualisation teams to create compelling and high-quality designs that showcase our engineered surfaces. This is an excellent opportunity for someone looking to gain hands-on experience in design and 3D visualisation in a cutting-edge industry.

Key Responsibilities:

• Assist in the design and development of product concepts and visual presentations for our engineered surfaces.
• Create 3D visualisations, renderings, and prototypes using CAD software (e.g., AutoCAD, SolidWorks, Blender).
• Collaborate with the design team to refine product concepts, ensuring they align with brand standards and client requirements.
• Support the creation of marketing materials, presentations, and product brochures.
• Work on client-specific customisation projects and provide design solutions that reflect their vision.
• Assist in the preparation of mood boards, sketches, and material mock-ups for presentations and client meetings.
• Participate in product brainstorming and ideation sessions.

Qualifications:

• Currently pursuing a degree in Industrial Design, Product Design, Architecture, or a related field.
• Proficiency in 3D modelling and visualisation software (AutoCAD, Rhino, Adobe Illustrator, Adobe Photoshop, Keyshot, etc.).
• Basic understanding of design principles, material properties, and manufacturing processes.
• Strong attention to detail and a creative problem-solving approach.
• Ability to work independently and as part of a collaborative team.
• Excellent communication and time management skills.
• A portfolio showcasing relevant design work will be highly regarded.

Duration:
3-6 months (with potential for full-time employment after successful completion)

Why Join Us?

• Gain hands-on experience with cutting-edge materials and product design.
• Work in a collaborative and innovative environment.
• Opportunity to learn from industry experts and make an impact on real-world projects.

If you're ready to immerse yourself in the world of premium product design and visualisation, we'd love to hear from you!

Duration: 6 months

Location: Habourfront

Working Hours: Monday - Friday 830am to 6pm

Responsibilities:

• Ensure consistent brand messaging across all communication platforms
• Craft and develop content for social media, websites, email campaigns, press releases, and print materials
• Plan, execute, and monitor marketing campaigns to drive awareness and engagement
• Organise events and workshops to promote Institute technologies or create mindshare
• Manage marketing communications assignments across departments/divisions/research units within internal and external stakeholders
• Work with Corporate Communications on press materials of technologies/projects for media announcements, speeches and other level communications initiatives or events

Requiments:

• Degree in Marketing, Communications, or a related field
• At least 2 to 3 years of experience with a good command of English, and can demonstrate hands-on competencies in copywriting, graphic design and video production
• Have a good understanding of the multi-channel media landscape
• Excellent writing and editing skills, with the ability to produce clear, concise, and engaging content
• Excellent communicator with strong verbal and presentation skillsets, as well as people engagement skills
• Proficiency in graphic design tools (Adobe Creative Suite, Canva) and video editing software
• Excellent command of English and video production skill is required

To apply, simply click "APPLY" and submit your curriculum vitae (CV) through GO, the official PERSOLKELLY job application platform

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. R23114622 So Man Xin

Purpose of the Role:

The Design & General Manager at ALBD Living, Singapore, will be pivotal in driving the company’s vision to become the leading boutique full-service Interior Design, Marketing, and Branding Studio. This role combines strategic leadership with hands-on management to ensure operational excellence, financial growth, and the delivery of exceptional design solutions. By fostering innovation, building strong client and supplier relationships, and cultivating a high-performing team, the Design & General Manager will position ALBD Living as a thought leader and a trusted partner in the industry.

Key Responsibilities

1. Operational Leadership:

· Oversee all aspects of the Singapore office, including design, client service, and project execution.

· Manage performance targets, KPIs, and budgets to achieve financial and strategic goals.

· Ensure operational efficiency, optimize processes, and maintain compliance with regulations.

2. Financial Management:

· Achieve EBITA targets (20%) by improving operating ratios, pricing strategies, and supplier relationships.

· Drive financial growth with a minimum benchmark of SGD $3M in revenue within 12 months.

3. Organic Revenue Growth:

· Focus on expanding the Singapore/Australia client base through new acquisitions and enhancing relationships with existing clients.

4. Leadership and Team Development:

· Recruit, train, and lead a high-performing team in a collaborative and scalable work environment.

· Conduct workshops and training sessions to develop skills and prepare the team for future growth.

5. Design Excellence:

· Champion innovative and high-quality design solutions aligned with ALBD Living’s brand vision.

· Ensure projects meet exceptional standards for creativity, functionality, timelines, and budgets.

6. Client and Supplier Relationship Management:

· Build strong relationships with clients and suppliers, ensuring high satisfaction and retention rates.

· Act as a trusted advisor to deliver exceptional service and outcomes.

7. Market Expansion & Positioning:

· Establish ALBD Living as the leading boutique full-service studio in Singapore.

· Develop strategies to maintain thought leadership through speaking engagements, publications, and industry awards.

These KPIs ensure a balance between creative excellence, client satisfaction, and the company’s commercial success. Regular tracking and evaluation of these metrics will guide the continual improvement of both creative and strategic efforts.

Requirements:

· Bachelor’s Degree in Interior Design, Architecture, Business Administration, Marketing, or a related field.

· 10+ years of experience in a leadership role within the Interior Design, Branding, or Marketing industry.

· Proven track record of achieving financial growth, including meeting revenue targets.

· Demonstrated ability to oversee business operations, including design, project execution, and team leadership.

· Experience in client relationship management and supplier negotiations.

· Strong understanding of financial metrics such as EBITA, cost optimization, and pricing strategies.

· Familiarity with the Singapore and Australia markets is advantageous.

Skills:

· Leadership and Strategic Vision: Exceptional leadership skills to inspire and manage diverse teams and drive business growth.

· Financial and Operational Management: Expertise in achieving financial objectives and optimizing operational processes.

· Creative Excellence: Strong ability to champion innovative, high-quality design solutions.

· Client and Supplier Management: Outstanding interpersonal skills to build trust and deliver exceptional client outcomes.

· Business Development: Acumen for identifying and capturing new opportunities and expanding market presence.

· Team Building: Skilled in recruiting, mentoring, and fostering a collaborative work environment.

· Design and Branding Knowledge: Solid understanding of design principles, marketing strategies, and branding trends.

· Public Speaking and Thought Leadership: Ability to represent the company through speaking engagements, publications, and awards.

· These concise requirements and skills highlight the qualifications and expertise needed for the role.

Roles & Responsibilities:

• Responsible to create concept designs for sales proposal and as well as detail design for confirmed projects.
• Ability in selecting the right components, design of fabrication items as well as working with vendors/sub-con for assigned projects.
• Responsible for planning and executing strategies for completing projects on time and also managing the projects’ budget.
• Exhibit a level of creativity and ingenuity, as well as problem solving skills, to provide reliable, cost-effective solutions to design issues and attend to customers’ enquiries.
• Working with respective project engineer and assembly team on project schedule management, budget management, as well as customer’s review/discussion.

Job Requirements:

• Minimum of 3 years relevant experience in related process manufacturing
• Degree in Mechanical Engineering
• Working knowledge of high-level communication protocols and troubleshooting skill
• Good analytical and planning skills
• Able to work under very tight project timeline
• Independent and good team player
• Willingness to travel overseas, as required

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

• Requires a BS in Electrical or Computer Engineering
• Some years of relevant experience is preferable
• Fresh graduates are encouraged to apply

Hiring with skillset below

• Ability to front and discuss projects with customers
• Design and Deployment of Infrastructure/Network/Security Solutions
  • Experience in deploying Checkpoint, Fortinet, etc..
  • Experience in deploying networks such as Citrix, F5, etc..
  • Implement VPN solution for secure remote access
• Network Security Management:
  • Handle network security for both on-premise and cloud environments (AWS, Azure, Google Cloud).
• Design and Solution Implementation:
  • Collaborate with network, storage, and application teams to design and implement secure network architectures.
  • Create and present technical solutions to management and business units for approval and implementation.

Skills For Success

• Degree in computer science/ Information Technology, Network Industry certification (e.g CCNA, CCNP) and Professional Security certification is highly desirable.
• 2-5 years of working experience in Corporate Network & Security.
• Experience and knowledge in area of Network, Firewalls, Security Load balancers, VPNs and Authentication Systems.
• Knowledge of LAN, WAN and Data Centre network & Security industry standards relevant to data communications / networking and computing.
• Knowledge of endpoint hardware will be advantageous.
• Knowledge on Security best practices and experience in Network solutioning, Operations and UAT.
• Provide timely project status updates.
• Experience in working with vendors on technology and services.

Rewards That Go Beyond

Ongoing training and development programs

Internal mobility opportunities

Your Career Growth Starts Here. Apply Now!