Our client is a global provider of intelligent automation and integrated security management solutions.

• Oversee and manage facilities, security projects, and maintenance from concept to completion.
• Work with cross-functional teams to gather requirements and design tailored solutions.
• Establish a maintenance regime for facilities to ensure minimal downtime.
• Ensure projects are completed on time, within budget, and meet the highest quality standards.

Requirements:

• Diploma in Electrical & Electronics Engineering/Instrumentation Control or equivalent.
• Minimum 2 years of hands-on project execution experience in ELV and CCTV.
• Good understanding of Electrical Control.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design. To be cost-effective, the whole outturn cost of the design solution must be considered, including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• Monitor installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall have Excellent knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff.
• The candidate shall assist in ensuring a safe working environment for all staff.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The candidate shall have at least 8 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind, with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 5 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

A start-up IT and application company is seeking an experienced Full Stack Engineer, a versatile software developer skilled in both front-end and back-end application development.

Here's a brief overview of what the job entails:

1. Remote work, responsible for the entire process of project architecture design and functional module development, with the ability to break down tasks based on project requirements.

2. Participate in system development planning, code writing, code review, requirement analysis, defect tracking, and quality control activities.

3. Participate in backend API development; familiarity with Java microservice architecture is required.

4. Continuously optimize code quality to enhance system performance and stability.

5. Proficient in mobile front-end technologies and familiar with front-end framework design.

6. Supporting in system maintenance (training provided by colleagues based in China)

7. Trademark and Intellectual Property (IP) application

8. Proactively communicate, identify, and resolve system issues.

9. Have a certain understanding of industry knowledge and focus on user experience.

Job Requirements:

1. Bachelor's degree or above in Computer Science, Software Engineering, Electronics and Information, or related fields.

2. Over 3 years of experience in system development, proficient in using Java, Spring, MySQL, and Vue (or Bootstrap).

3. Proficient in Java and object-oriented design principles, with a solid understanding of JVM fundamentals.

4. Skilled in commonly used front-end technologies, including HTML/CSS/JavaScript/Node.js, and experience with mainstream development frameworks like React or Vue.js.

5. Familiar with commonly used databases such as MySQL, with proficiency in SQL for database queries and basic database operations.

6. Ability to work independently and complete relevant development tasks.

7. Speak in Mandarin, familiarity with WeChat for information exchange, and English for translation work are essential. You will be expected to communicate and work closely with colleagues based in China.

The Role:

Planning and Preparation: Collaborate with project managers and other stakeholders to plan installation activities, including scheduling, resource allocation, and site preparation.

2. Equipment Inspection: Inspect equipment or systems prior to installation to ensure they meet specifications and are in proper working condition.

3. Site Assessment: Conduct on-site assessments to evaluate installation requirements, including space constraints, access points, and safety considerations.

4. Installation Supervision: Lead installation teams, providing guidance and direction to technicians, contractors, and subcontractors to ensure efficient and safe installation processes.

5. Assembly and Configuration: Assemble and configure equipment or systems according to manufacturer guidelines and technical specifications, ensuring proper alignment, calibration, and functionality.

6. Testing and Commissioning: Conduct tests and commissioning activities to verify the functionality and performance of installed systems, troubleshooting any issues or discrepancies as needed.

7. Quality Assurance: Implement quality control measures to ensure installations meet company standards and customer requirements, conducting inspections and audits throughout the installation process.

8. Compliance and Safety: Ensure compliance with relevant regulations, codes, and safety standards during installation activities, promoting a culture of safety among installation teams.

9. Documentation: Maintain accurate records of installation activities, including documentation of materials used, work performed, and any deviations from the original plan. Prepare reports for project managers and clients as required.

10. Customer Satisfaction: Ensure customer satisfaction by delivering installations that meet or exceed expectations, addressing any concerns or issues promptly and professionally.

The Requirements:

1. Candidates with Railway experience will be preferred.

2. Minimum 1 year experience in installation of electrical and communication infrastructures.

3. Diploma in Electrical/Mechanical Engineering or its equivalent, preferred.

4. Team player with good interpersonal and communication skills.

5. Willing to work outside of prime office hours as required.

6. Self-motivated and Service oriented.

7. Able to work independently with minimum guidance.

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

Role：

Automation Engineer (Siemens PLC)

• Singapore Based (Changi)
• 5 Days work per week (9am to 6pm (may need go back office if need any support))
• $3500 to $5000
• Diploma / Degree in an engineering discipline + Minimum 3 years of experience in manufacturing industries with an automation background.
• Required hands-on experience and remote support + Need strong foundation in Siemens PLC and / or Fanuc robotics.
• A proven record of accomplishment in automation work will be advantageous.
• Career Progression Opportunities

Key Responsibilities:

General Equipment

Identifies or addresses malfunctions of plant operational equipment. Proactively involved in identifying the defects in the operational equipment and finding out ways in which can be rectified.

Monitors plant equipment operation and performance, adjusting to performance specifications.

Communicates the status of operating equipment to production supervisors or managers.

Maintain logs and reports. work requests, or other records of work performed in the plant.

propose improvements to prevent the re-occurrence of trouble, and target set not more than 3 times similar incidents.

Coordinate with all contractors/supplies for in-house periodic maintenance including plant facilities and repairs.

PLC & Software

Able to read and write Siemens S7 PLC & HMI codes.

Knowledge of serial communication.

Knowledge of programming languages

Other Operational Duties

Maintain proper documentation

Housekeeping of spare parts, tools, and accessories.

Initiate and participate in continuous improvement projects

As assigned by Managers.

Competencies

Electrical design and drawing.

Install, calibrate, program modification, operate, and simulate the industrial Robot such as FANUS using Siemens S7 PLC, and HMI.

Work with Suppliers and Vendors to determine the selection of proper components.

Perform installations/commissioning of machine/robot.

Travel:

Travel for this position is up to 30%.

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

Min 2 yrs. of SD agent working experience

Good Laptop/Desktop troubleshooting skillsets

Excellence customer handling skills

Excellence communication skills

Furnish and submit timely updates to customers on the status of outstanding issues within targeted Service Level

Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded.

Manage customer expectations and notify Team Lead in the event of unusual surge in calls of a specific nature.

Handle initial classification/ prioritization of the incidents. Track the progress of resolution and provide regular updates for follow-up actions and incident status.

Our client delivers a broad array of solutions and services, featuring IBMS, Smart Facility Management, IoT and Data Analytics, ELV Systems, as well as Network Infrastructure and ICT solutions.

• Perform testing of DCS/DDC/PLC with SCADA software.
• Conduct the communication test for Devices using different protocol.
• Arrange and submit documents and report as per the requirement.
• Ensure timely completion of commissioning activities.

Requirements:

• Diploma in Electrical Engineering or equivalent
• At least 2 years of experience in Industrial/Process automation, building ACMV systems for Built Environment Projects.
• Experience in building management systems will be advantageous.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected].

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is a global provider of intelligent automation and integrated security management solutions.

• Responsible in project management, implementation and maintenance services of security system, including system design, system configuration and coordination works.
• Work closely with other departments, including design, procurement, and installation teams.
• Verify that engineering tasks are aligned with the overall project timeline and objectives.

Requirements:

• Diploma in Electrical Engineering or equivalent
• At least 2 years of Security System Installation experience.
• Knowledge in Computer/Network/Security/ELV/Electrical System.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Provide supervision services for all M&E works to ensure that contractors complies with contract/authorities'/agencies' requirements
• Oversee the M&E team and personnel
• Review all drawings and specifications and highlight any discrepancies, non-workable and/or missing details to OIC and the QP(D)s and QP(S)
• Review and comment on all construction method statements, risk assessmentsfor works, workplans, design for safety (DfS) workshop and SOP proposals
• Evaluate technically any claims submitted by main contractor and submit recommendation to the Superintending Officer
• Provide all relevant endorsements required by authorities/agencies/client
• Assist QPD for application of TOP and CSC
• Prepare site supervision plan and supervise all works directed by OIC
• Monitor project progress to ensure timely completion and prepare necessary site progress and status report for update to client
• Adhere to regulations and requirements of all stakeholders for any supervision work while ensuring proper supervision
• Report any accident/incident/near miss on site

Requirements

• Accredited with Resident Engineer certification under Joint Accreditation Committee of the Institution of Engineers Singapore
• Minimum 10 years of experience , of which at least 8 years in major construction works in buildings, services laying and testing and commissioning
• A Mechanical and Electrical Engineering degree recognised by the PEB of Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report
• Licensed electrical worker and licensed plumber are preferred

RF Unit

• Disassemble RF unit and Calibrate the unit according to SOP
• Troubleshooting and repair of PCB assemblies
• Soldering work and board rework on HD, surface-mount PCB assemblies
• Provide necessary fault information and repair records for work carried out
• Knowledge of handling different test and measuring equipment, LCR meter and Network Analyzer
• Complete repair job in a timely manner
• Maintain SOP documents required for daily repair/rework operation
• Knowledge of Smith Chart

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Our Client is a leader in the Manufacturing MNC. Due to their current expansion plan, they are looking for a Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibility:

• Responsible in production planning and control processes
• Handle manpower allocation/planning and participate in HR-related activities.
• Manage order processing and related documentation tasks.
• Work closely with Sales and Quality departments to resolve production issues.
• Track and monitor production schedules to meet delivery timelines.
• Prepare and submit detailed monthly production reports.
• Involve in process improvement initiatives.
• Any other ad-hoc duties as assigned.

Requirement:

• Minimum Diploma in Engineering related studies or equivalent
• Minimum 2 years relevant experience
• Proficient in Microsoft Office application

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Job Responsibilities:

• Participate in designing solutions that meet functional requirements
• Implement end-to-end specifications for solution components
• Generate relevant documents and reports
• Perform testing and implementation of solutions
• Participate in UX activities such as creating wireframes/storyboards, conducting user research/interviews and developing user stories, storyboards
• Contribute to the SDLC in the areas of coding tools, languages, and software designs

Job Requirements:

• Min diploma/degree in Computer Science or any IT related field
• Familiarity in any of the programming languages: Java, Javascript, Python, C++, C# etc
• Proficient in Web Technologies like HTML, CSS
• Excellent working attitude and a strong team player

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Role: Senior / DeltaV Programmer - LSMG

Responsibilities

• Responsible for the design and delivery of DeltaV application system on site.
• Participate in the development and implementation of Automation solutions in line with S88 standards for the plant.
• Creates and maintains applications according to technical design and requirements.
• Develop and/or review System Development Life Cycle (SDLC) deliverables, compliant with the site’s standards. Determine the processes and data flow that supports the needs of the project.
• Design & Develop plan for modifications to be made to the system through working with team in development of systems architecture, specifications, controls strategies, sequence of operations through all stages.

Requirements

• Experience in a similar role, ideally in the Pharmaceutical and/or Biotechnology industry.
• Emerson DeltaV DCS system experience and DeltaV Batch experience required
• Experience in the Designing and commissioning of DeltaV DCS project for GMP manufacturing site.
• Technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc)
• Familiarity with GAMP lifecycle and quality management processes employed in the pharmaceutical sector
• Ability to work well in a team environment
• Supervise and conduct system testing Factory Acceptance Test (FAT)
• Excellent computer skills, proficient in the use of the following Microsoft tools: Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills
• Good analytical & problem-solving skills
• Ensure project Automation Strategy is followed.

About Cognizant

Cognizant (Nasdaq: CTSH) engineers modern businesses. We help our clients modernize technology, reimagine processes and transform experiences so they can stay ahead in our fast-changing world. Together, we're improving everyday life. See how at www.cognizant.com or @cognizant.

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

• Perform end user IT Support
• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

Responsibilities:

• Plan and implement the work based on company policy and ensure on schedule.
• Support and maintain the MS Windows servers, SAN Storages and CISCO network infrastructure of the whole company.
• To review the current IT infrastructure and propose improvement plans.
• To maintain and improve backup of the systems.

Requirements:

• Bachelor’s degree in IT related field or Diploma with at least 4 years of related working experience
• Good knowledge in configuration of networking and IP telephony system.
• Good hands-on knowledge of Microsoft Server system
• Strong analytical and troubleshooting skills
• Candidate with MCSE, CCNA certification is preferred
• Project management knowledge (good to have)
• Experience in manufacturing field will be an added advantage.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24717

To learn more about this opportunity, please contact Yingying at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lai Yingying | Registration No: R1110239

We are seeking a highly skilled Senior Cloud/ DevOps Engineer to contribute to significant government projects!

• Join a team that utilizes technology to enhance the lives of Singaporeans.
• Agile development culture to promote continuous learning and growth.
• Competitive remuneration package.

Responsibilities:

• Design, implement, and maintain CI/CD pipelines to automate software build, test, and deployment processes.
• Implement monitoring solutions and manage monitoring and alerting tools.
• Maintain configuration management, build, continuous integration, and deployment tools.
• Source code management and collaborate with development teams on branching strategies and versioning.
• Streamline operational tasks, monitoring, and infrastructure provisioning.
• Design and implement production infrastructure architecture based on application requirements, ensuring scalability, availability, and security.
• Integrate security best practices into the software development lifecycle and ensure compliance with relevant standards and regulations.
• Prioritize and execute tasks in a high-pressure, fast-paced environment.

Job Requirements:

• Bachelor’s Degree in IT, Computer Science, or related fields.
• Minimum of 5 years of relevant DevOps experience.
• Knowledge and experience in configuring automated build, test, and deploy pipelines to streamline the software delivery process.
• Experience in containerization technologies such as Docker and Kubernetes.
• Experience in configuration management systems (Terraform, Packer, Ansible).
• Experience in AWS (Related certification will be advantageous).
• Prior experience in Linux server administration, and shell scripting.
• Working experience in Agile environments or projects (Scrum/Kanban).

Interested candidates may apply via email to [email protected] (indicating Job ID J44445 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – Outsourcing Team
ScienTec Consulting Pte Ltd – 11C5781