职位：家私设计合伙人

准证：Sg、pr、 ltvp

薪水：1000-10000

工作时间无

要求：有相关经验

地点：211Henderson Rd

Position: Furniture Design Partner

Pass: SG, PR, LTVP

Salary: 1000-10000

None during working hours

Requirements: Relevant experience

Location: 211 Henderson Rd

Jie Shun Jia | EA License No.: 24C2410 | EA Registration No.: R24124440 (FENG YINGJIE)

• Based on the master program, work out a schedule for shop drawing preparation/approval and material approval/procurement and monitor the status.
• Supervise BIM modelers to produce shop drawings.
• Liaise with the BIM team on drawings production to identify clashes with other trades.
• Review, coordinate, and liaise with Consultants and Subcontractors to define the Architectural construction details and interface to Structure and M&E services.
• Ensure compliance with construction drawings, project specifications, client's needs, and authorities' codes and standards.
• Verify site installation according to approved shop drawings and finalize as-built drawings.
• Review project specifications, technical clarification, and construction drawings, identify technical issues, and seek clarification.

Requirements:

• Candidate must possess at least a Professional Certificate, Diploma, or a Bachelor’s
• Degree in Building or Architectural from a recognized institution.
• Minimum 5 years of relevant experience in building projects
• Knowledgeable in Singapore Building Codes and Regulations for Code on Accessibility in the Built Environment, Approveddocument/Acceptable solution and Green mark issued by BCA
• Familiar with local standard quality implementation, BCA CONQUAS, and other Quality Mark Assessments Familiar with Safety aspects in the Construction industry.
• Preferable experiences in Hospital/Medical facility in Singapore.
• Preferable knowledge of BIM software / Autodesk Revit.

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

Interior Design Consultant

Job Description & Requirements

The challenge

• Meeting expectations of clients to fit out their dream homes
• Always be in touch with the latest design trends and high-end furnishings
• Securing commercial clients and meeting up to their project expectations

Responsibilities

• Meet and work closely with clients and the Team to ensure smooth workflow
• Preparation of full set presentation - including design concept, space planning for all layouts and selection of materials
• Preparation of design & detail drawings, and time schedule
• Coordination of site handover and monitor fitting-out progress

Requirements

• Diploma or Degree in Interior Design or relevant courses will be considered
• OR, if you have a minimum of 1 year of experience in residential / commercial projects
• Proficiency in generating 3D computerized perspective visuals / presentation drawings / technical drawings
• Creative and ability to lead a team’s a strong bonus

Benefits

• Basic remuneration is based on qualifications and experience
• AWS & bonus
• Annual leave and medical benefits

Hope to hear from you soon!

Email to [email protected]

Job Description

Primarily responsible to develop and conceptualize designs for commercial & residential projects

Must be able to generate layout plan and 3D perspective drawings in fast-paced work environment

Project coordination and design documentation

Project administration

Proficiency in Autocad, VRay, Sketchup, 3D Max & Photoshop and AI.

Must have creative mind in terms of commercial and residential.

Strong In Interior Design conceptualizations.

Good communication skills

Creative with a strong sense for colors and texture.

Pleasant working attitude, self-motivated, hardworking and passionate.

Working hours : 9.00am to 6.00pm (Mon-Fri) , 9.00am - 1.00pm (Sat)

About Us

Cinch is an innovative fintech and e-commerce business based in Singapore. Our mission is to build Asia’s largest Device-as-a-Service platform using circularity to align economic goals with environmental impact. We are committed to empowering people with access to tech without waste through our subscription-based model, disrupting a USD 700 billion industry across Asia Pacific.

Backed by a seed round from globally renowned investors, we're assembling a diverse and dynamic team passionate about social impact, changing consumer behaviours, and thriving in the fast-paced environment of a start-up.

Position Overview:

We are looking for a creative and enthusiastic UI/UX Design Intern to assist in designing user interfaces and creating seamless user experiences for our web and mobile applications. You will collaborate with product managers, developers, and senior designers to ensure that our products are intuitive, functional, and visually appealing.

Key Responsibilities:

• Assist in designing wireframes, mockups, and prototypes for websites and mobile apps.

• Conduct user research and gather feedback to identify pain points and opportunities for improvement.

• Collaborate with senior designers to refine UI components and design systems.

• Contribute to usability testing and assist in analyzing user feedback.

• Help create and maintain design documentation and assets.

• Work with development teams to ensure design consistency and smooth implementation.

• Participate in design review sessions and receive constructive feedback to improve your skills.

Job Requirements:

• Currently pursuing a diploma in Graphic Design, Interaction Design, HCI, or related fields.

• Familiarity with design tools such as Figma, Adobe XD, Sketch, or similar.

• Basic understanding of user-centered design principles and best practices.

• Strong interest in UI/UX design, with a desire to learn and grow.

• Good communication and collaboration skills.

• Ability to work independently and as part of a team.

• A portfolio showcasing design projects (academic or personal) is a plus.

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

Built on decades of expertise and execution, Marvell’s custom Processor/ASIC solution offers a differentiated approach with a best-in-class portfolio of data infrastructure intellectual property (IP) and a wide array of flexible business models. In this unique role, you’ll have the opportunity to work on both the physical design and methodology for future designs of our next-generation, high-performance processor chips in a leading-edge CMOS process technology, targeted at server, 5G/6G, automotive, and networking applications.

What You Can Expect

• You will work with a global team on both the physical design of complex chips as well as the methodology to enable an efficient and robust design process.
• You will be responsible for maintaining, enhancing, and supporting Marvell's Place and Route Flow, leveraging industry-standard EDA tools.
• Your tasks will include performing synthesis, place and route, as well as timing analysis and closure on multiple intermediate and complex logic blocks.
• You will play a crucial role in developing and implementing timing and logic ECOs, collaborating closely with the RTL design team to drive modifications that address congestion and timing issues.
• Additionally, your involvement with the global timing team will include debugging and resolving any block-level timing issues encountered at the partition level.
• This position provides an exciting platform to engage with diverse engineering challenges within a collaborative and innovative environment at Marvell.

What We're Looking For

• Bachelor’s Degree in Electrical/Computer Engineering, Computer Science, or related fields and min 10 years of related professional experience OR a Master’s degree and/or PhD in Electrical/Computer Engineering, Computer Science, or related fields with min 5 years of related experience. In your coursework, you must have completed a digital logic course and projects that involved circuit design, testing, and timing analysis.
• Good understanding of standard RTL to GDS flows and methodology
• Good scripting skills in languages such as Perl, tcl, and Python
• Good object-oriented programming skills
• Good understanding of digital logic and computer architecture
• Knowledge of Verilog/VHDL
• Good communication skills and self-discipline contributing in a team environment

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Key Responsibilities:

• Prepare and produce 2D and 3D drawings using AutoCAD
• Develop layout plans, elevations, sections, details and perspective drawings
• Liaise with site supervisor and technical coordinator for any drawings changes and amendment
• Liaise with Main Contractor for shop drawing submission
• Amend drawings to be used for site construction
  

Requirements:

• Minimum diploma in architectural, engineering or construction related background
• Minimum of 2 years hands-on experience on AutoCAD
• Proficiency in BIM software is preferred
• Proficiency with MS Office application
• Experience in steel, aluminium and metal works industry is preferred

Role:

Electrical and Control Design Engineer (Up to $5800)

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

Job Responsibilities:

• Will be assigned to a project to provide technical support and department relevant responsibilities.
• Assisting C&S lead/technical manager & in charge for all civil / structural engineering matters being tasked
• Attending and being proactive in design coordination meeting with consultants / client.
• Preparing and reviewing of shop drawings / materials / MOS
• Ensure drawing registry is maintained and latest drawings / BIM models are available for all parties involved (site staff, CTD, suppliers and subcontractors).
• Ensure transmittal forms / emails are issued for latest drawings / BIM models when issued to CTD, suppliers and subcontractors.
• To study & review drawings / specifications in identifying discrepancies and issue queries to consultants accordingly via RFI
• Resolve technical issues on drawings and liaise closely with Consultants, all trades and authorities.
• Ensure BIM team update the drawings / BIM Model with the latest information available timely.
• Upkeep all submission, response for the submission and approval. Monitor the status of the submission and pursue response from the relevant parties once the response is due.
• Prepare as-built drawings / BIM Model and compile O&M Manual for submission.
• Attending VDC for civil / structural related matters. Cross check BIM model with contract drawings.
• To ensure works are carried out in accordance with drawings, specifications and PE design.
• To ensure material testing are carried out in timely manner and as per the specifications.
• To identify and resolve any potential site issues at the work site from technical aspect
• Attending sub-con meetings and technical meetings for structural related matters; prepare and circulate meeting minutes in a timely manner.
• Ensure all structural submissions (as-built, ST COS etc) are done prior to TOP application.
• Work with senior, PM and Site Manager in planning and executing temporary works.
• Preparing as-built drawings and submission of O&M.
• Assisting senior for structural matters related to CONQUAS assessments / submissions.

Job Requirements:

• Degree in Civil / Structural or a related discipline
• A minimum of 3 years of relevant experience for Structural engineer & 6 years of relevant experience for Senior engineer
• Proficient in Microsoft Office, AutoCAD and proficiency in BIM.
• Understanding of structural engineering principles and practices.
• Knowledge of authority submission requirement
• Able to communicate with consultants, client, authority/government agencies and site supervisors.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd

16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Responsibilities:

• The Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification.
• It is also expected that you will conduct periodic design reviews, including with application engineers.
• It is also expected that you will support test development and product development teams in bringing projects to production.

Requirements:

• PhD/Master’s Degree in Electronics/Electrical Engineering.
• Minimum 6 years’ experience in Analog or Mixed-signal IC design.
• Very good knowledge of CMOS processes.
• Highly proficient in analog and mixed-signal IC design EDA tools.
• Experienced in analog and mixed-signal circuit designs, such as regulators, DC-DC converters, low-power, low-noise biasing circuits and amplifiers, sigma-delta modulation and ADCs, etc
• Experience in design of high resolution, low power sigma-delta modulation preferred.
• Experience in design of ultra low power ADC preferred.
• Skilled in laboratory testing of IC prototypes.
• Knowledge of Linux operating system required.
• Experience in MEMS interface ASIC design advantageous.

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Employer Background:
The employer is a prominent player in the precision engineering sector, specializing in the manufacturing of high-quality metal components. They are known for their advanced engineering capabilities and commitment to delivering tailored solutions to meet customer needs.

Overview:
Join a dedicated team as a Design Engineer, where you will contribute to the design and development of precision engineering solutions, focusing on automation systems and custom fixtures.

• Position: Design Engineer
• Industry: Precision Engineering
• Department: Design and Engineering
• Employment Type: Full-Time
• Working Days & Hours: 5 Days, Monday to Friday, 9:00 AM to 6:10 PM
• Work Location: Within Central Location at Macpherson
• Salary Range: Up to $4,500 Monthly Basic (Based on Relevant Experience)

Job Responsibilities:

• Create schematic diagrams and manufacturing drawings for automation systems and jigs & fixtures, utilizing AutoCAD and/or SolidWorks.
• Collaborate closely with engineers and coordinate with customers to ensure that manufacturing drawings meet specifications and requirements.
• Assist in the design and engineering process to enhance manufacturing efficiency and product quality.

Requirements:

• Experience: Minimum 1 year of relevant working experience, preferably in the manufacturing automation or jig & fixture industry. Entry-level candidates are welcome to apply; training will be provided.
• Education: Minimum educational qualification: Nitec / Higher Nitec / Diploma / Degree in Engineering (Any Major).

Recruit Lync Pte Ltd | EA License Number: 22C1000
Poon Weng Teik (Wilson) | EA Personnel License: R1657737

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Marine/ Oil & Gas
• Position Title: Design Engineer
• Working Location: Loyang (Transport provided)
• Working Hours: Monday to Friday, 9 am – 6 pm
• Salary Package: Up to $4,200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that engineering designs meet project-specific requirements, adhere to Engineering Standard Practices, and align with the company's ISO procedures, as well as national and international engineering norms, codes, and safety standards.
• Create essential documents and drawings, including block diagrams, bills of materials, functional design specifications, design calculations, wiring diagrams, and other necessary documentation. These ensure that equipment can be procured, integrated, tested, installed, and delivered to the customer on schedule.
• Verify that equipment provided for specific projects meets relevant specifications, complies with project technical standards, is correctly configured, and is fully completed.
• Ensure that the specified and designed equipment can be effectively integrated with other systems and equipment with which it interfaces.
• Develop test procedures suitable for project commissioning and provide technical support to the system assembly and integration team.
• Carry out other tasks as assigned by the Projects & Retrofit Manager or Assistant Manager.

APPLY NOW!!!

• At least a Diploma in IT or Engineering with minimum 2 years of related working experience.
• Proficient with AutoCAD and MS Office.
• Proficiency in one or more of the following systems:

1. LAN & IP Telephony: Experience in voice/data network design, implementation, and deployment; familiar with Juniper, Cisco, and HP Procurve switches and routers.
2. Radio Communication: Expertise in HF/VHF/UHF/Microwave/VSAT systems; capable of frequency interference analysis and radio coverage analysis; familiar with analogue/digital radio systems and trunked radio systems.
3. PAGA System: Experience in PAGA system design and sound coverage analysis simulation.
4. Security Systems (CCTV & Access Control): Experience with analogue/IP CCTV and access control systems; familiarity with Pelco, Bosch, Synetic, GE, LENEL, Bosch systems; PLC system experience is a plus.
5. Navigation Systems: Knowledge of Aeronautical VHF Radio, Meteorological Monitoring, Non-Directional Beacons, Marine Radar, GMDSS, Gyrocompass, and Navigation Aids.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68836 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing/Food Production
• Position Title: Marketing & Design Coordinator (Food Products)/ Marketing Executive
• Working Location: Jurong West
• Working Hours: 5 days, Mon - Fri (8 am – 5 pm)
• Salary Package: Up to $2900 (basic) + $90 (Transport Allowance) + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Oversee brand promotional activities and manage packaging artwork edits.
• Act as an in-house designer for urgent packaging modifications and creation of new Point of Sale Materials (POSMs).
• Maintain and update website content.
• Assist in the development and planning of new products, guiding them from concept to commercialization.
• Support additional marketing activities as needed.

APPLY NOW!!!

• Minimum Diploma holder with 1-2 years of relevant experience.
• Proficiency in using Adobe Illustrator and Photoshop for designing and editing artwork and packaging.
• Experience with social media marketing is highly desirable.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69402 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Our client is a leading construction company, specialize in marine engineering and land reclamation projects.

• Handle the design team to achieve targets for the Civil engineering, Geotechnical engineering, Infrastructural design works.
• Lead consultant and review their design to ensure to meet the relevant requirements and the project’s preference.
• Discuss the design results to the client and other stakeholders and obtain their agreement.
• Enhance the design to reduce cost and construction schedule effectively.
• Finish all design works including necessary approvals without adversary affecting the tender/construction schedule.

Requirements:

• Degree in Civil Engineering recognized by the PE Board
• At least 7 years of marine civil design experience in a large-scale project.
• Good knowledge in international and domestic standards for design work.
• Experience in marine structure D&B plant project and overseas ODA project is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

Responsibilities:

• Produce design concepts - includes space planning, render 3D perspectives and construction drawings
• To receive requirement brief and discuss project with internal design team and external contractors/suppliers
• Source and select materials, furnishings, lighting fixtures and accessories that enhance the overall design concept
• Prepare presentation materials and design documentations
• Any other ad hoc duties as assigned

Requirements:

• Minimum 3 years of working experience in Interior Design, preferably specializing in Corporate Office Interior Design
• Recognized Diploma/Degree in Interior Design, Architecture or equivalent
• Proficient in AutoCAD, 3Ds Max, V-ray, Photoshop and other design related software
• Possess excellent design flair and highly creative with a good eye for design details
• Strong in conceptual design and space planning skills with strong design portfolio
• Positive attitude, result-oriented and a good team player
• Able to work under pressure and with a sense of urgency to meet tight deadlines

A competitive remuneration package and a long-term career prospect will be offered to the right candidate. Apply now with your full resume including portfolio, work experiences, reason for leaving, current and expected salary and earliest available date.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Company’s profile
Julian Grey's client specialises in electrical engineering services, offering high-quality installation, design, and supply solutions.


Responsibilities:

• Submit designs, shop drawings, and calculations.
• Lead front-end engineering and feasibility studies.
• Assess design specifications for cost savings and technical improvements.
• Ensure seamless integration of services during project meetings.
• Manage the design approval process with all stakeholders.
• Report on design submissions and handle DAR submissions.
• Oversee testing and commissioning of high voltage systems and ISCS.
• Track design deliverables to ensure timely completion.
• Identify and mitigate design risks affecting project performance.

Requirements:

• Minimum Diploma in Electrical Engineering
• M&E experience in the construction industry

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities -https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Account Executive

Address: Redhill
Working days: 5 days Mon to Fri 9/10am to 5pm (can WFH 1-2 days per week)
Salary: $2500 to $3000

Requirements
Diploma in Accounting, Finance, or a related field.
2 years of full-set accounting experience.
Proficiency in accounting software (e.g., QuickBooks).

We are a start-up interior design firm looking for detailed-oriented and organized accounts executive to join our company.
We allow hybrid working arrangements and has a collaborative working environment.

Job Description:
Handle full sets of accounts including invoicing, receipt updates, vendor invoice processing, payment arrangements, journal entries, maintenance, bank reconciliation, balance sheet schedules, fixed assets registers, and general ledger
Manage day-to-day financial operations and monitor cashflow
Prepare and review gst submission and tax returns
Preparation of financial statements and assist in other related statutory filings required
Manage end to end payroll process, including preparation, calculation and disbursement of monthly salary/commission
Ensure compliance with all statutory requirements such as CPF, income tax and other relevant payroll tax obligations
Support general administrative task

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Duration: 6 months

Location: Habourfront

Working Hours: Monday - Friday 830am to 6pm

Responsibilities:

• Ensure consistent brand messaging across all communication platforms
• Craft and develop content for social media, websites, email campaigns, press releases, and print materials
• Plan, execute, and monitor marketing campaigns to drive awareness and engagement
• Organise events and workshops to promote Institute technologies or create mindshare
• Manage marketing communications assignments across departments/divisions/research units within internal and external stakeholders
• Work with Corporate Communications on press materials of technologies/projects for media announcements, speeches and other level communications initiatives or events

Requiments:

• Degree in Marketing, Communications, or a related field
• At least 2 to 3 years of experience with a good command of English, and can demonstrate hands-on competencies in copywriting, graphic design and video production
• Have a good understanding of the multi-channel media landscape
• Excellent writing and editing skills, with the ability to produce clear, concise, and engaging content
• Excellent communicator with strong verbal and presentation skillsets, as well as people engagement skills
• Proficiency in graphic design tools (Adobe Creative Suite, Canva) and video editing software
• Excellent command of English and video production skill is required

To apply, simply click "APPLY" and submit your curriculum vitae (CV) through GO, the official PERSOLKELLY job application platform

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. R23114622 So Man Xin

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)