• Perform all roles and responsibilities required of site supervisors under the Building Control Act, regardless whether their names are stated in the form BEV_B1;
• Ensure that all the civil & structural and M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations;
• Lead the RTOs to monitor, supervise and inspect works as directed by CAG, the project consultants, QPs and/or SRE;
• Supervise concreting, pavement, drainage construction works (applicable for C&S);
• Carry out checks on compaction and curing of concrete (applicable for C&S);
• Carry out checks on striking of formwork, re-props and removal of props (applicable for C&S);
• Carry out checks on quality & erection of precast components (applicable for C&S);
• Check on structural steel works (applicable for C&S);
• Check and assess temporary works and ERSS by the contractors to ensure that the C&S, M&E and building works are safe and in compliance with all relevant regulations;
• Carry out coordination of all services, help resolve contractors’ queries and provide feedback on site issues, discrepancies and irregularities to QP(S), project consultants and/or CAG ;
• Review contractor’s submissions (shop drawings, method statements, risk assessment, test plans, soil sample test results, test cube results, DSM core results etc), and report any non-compliance with the Contract and authority’s requirements to CAG, the project consultants and/or QP(S);
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies;
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings;
• Attend QAQC meetings, monitor and check on quality on all works and materials on site; take measures to rectify any non-compliance and report of any materials that are not conforming to the Specifications;
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works;
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site;
• To review all drawings (including shop drawings, construction drawings) and method statements and risk assessments to ensure that works are carried out in accordance with the approved plans for discrepancies and report to the Superintending Officer / Contractor / QPs, including checking of as-built drawings and Operation & Maintenance Manual submitted by the contractors and ensuring that the required construction tests associated with the construction works are carried out where necessary;
• Coordinate and compile the As-Built information for record purposes timely.
• Monitor the quality and progress of defects rectification works when necessary.
• Ensure that daily records of all civil and structural engineering works including records of tests, defect rectification, inspections, work progress, material and equipment on site, safety, site diary, labour force, day works,provisional items or provisional quantities etc, are updated in a timely manner and properly kept;
• Keep accurate records of variations as instructed or approved and to maintain a set of updated drawings on site;
• Together with the safety team, provide overview of WSH and aerodrome safety management systems and risk analyses and implementation of safe working practices on site, provide safety oversight and ensure main contractors and their sub contractors adhere to the approved safe work
• procedures for the works and all relevant CAG and regulatory safety requirements; ensure mitigation controls in updated risk registers (Programme/Aerodrome/DfS) are duly implemented on site;
• Liaise with all relevant authorities;
• Adhere to the shift duty roster assigned;
• Undertake any other duties includign administrative tasks related to the project as and when instructed by the SRE, Consultants or CAG

Qualification:

• Minimum four (4) years of relevant experience as a civil & structural engineer, of which at least 3 years shall be in supervision of works in projects similar in size and complexity; in particular deep excavation and foundation, cut and cover tunnel works and building works;
• Possess a civil and structural engineering degree recognised by the Professional Engineers Board of Singapore;
• Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore;
• Lead C&S and/or geotechnical site staff to monitor, supervise and inspect works as directed by CAG, QP(S), SRE, the project consultants and FUI owners. He must possess good leadership qualities, organisational and inter-personal skills;
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report;
• Possess strong supervision and leadership skills;
• Must be willing to work shifts.

• Performs specific and moderate portions of a broader assignment of an experienced engineer.
• Gathers and correlates basic engineering data using established and well-defined procedures.
• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.
• Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignements.
• Identifies discrepancies in results.
• Provides guidance to entry level engineers.
• Performs work in accordance with agreed upon budget and schedule with little supervision.
• Independently performs all the tasks necessary to complete primary design
• elements for engineering works. 
• Performance at this level requires developmental experience in a professional position.

Job Description:

• Involvement in Production testing scope.

• Operates and maintains simple test equipment appropriately to measure and perform RF PCBA & module tuning and testing

• Perform duties with minimal supervision

• Integrates continuous improvement concepts and techniques into work

• Performs other duties as assigned

• Set up and run HASS to qualify the modules under testing conditions.

• Conduct a Functional Acceptance Test to complete the module test process.

• Maintaining the operations of the ATE stations

• To generate test reports

• Integrates continuous improvement concepts and techniques into work

• Performs other duties as assigned

Job Requirement:

• Education background : ITE or Diploma in Electronics / Communication Engineering or related studies

• On the job training will be provided.

• Prior experience working in electronics (modules) production / manufacturing environment

• Competent handling of miniature with tweezers

• Ability to handle and solder components using a microscope

• Ability to produce consistent quality workmanship on repetitive manual processes

• Work Location: Ang Mo Kio

Knowledge, Skills, Competencies

• Able to understand mechanical and electrical wiring diagram with some basic understanding of cable termination.

• Experience with network design and networking exposure will be added advantage

• Good knowledge with Operating platform such as Microsoft Windows and Linux

• Proficiency in operating measuring equipment or software such as network analyser, serial protocol analyser and oscilloscope

Salary - ($5,200 - $6,000)

Mon - Fri, 8am - 5:15pm

Job Description:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations

Job Requirements:

• Diploma/ Degree in Mechanical Engineering
• Minimum 2-3 years related work experience
• 2D & 3D CAD operations; strong in CATIA
• Proficient in Microsoft ( Excel / words / powerpoint )
• Good technical design and engineering background would be highly advantageous
• Solid work test will be conducted during interview

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Skills and experiences required

· Proficient in AUTOCAD & REVIT

· Knowledge of BIM (Building Information Management) will be an added advantage

· Minimum 3 – 5 years of relevant experience working in M&E construction or similar capacity

· Able to work under tight deadlines and schedules

· Meticulous and strong in construction detailing

· MS Office at least to intermediate level

Duties & Responsibilities

· Prepare contract documentation drawings for preliminary, construction and as-built status

· To work with Project Managers, Project Engineers and to co-ordinate with consultants as well as main and sub contractors on interpretation of drawings

· Prepare shop drawings for Mechanical system

· Ensure drawings are compliant with the regulatory specifications

· Ensures qualitative and timely delivery of all drawings and maintain soft copy of archive drawings

· Attend weekly meetings

Qualifications & Other requirements

· Diploma in Mechanical/Electrical / Higher NITEC holders or its equivalent

· Willing to work extended hours and/or on weekends & public holidays when urgently required

· A team player with initiative, drive and a positive attitude

· Singaporean / Singapore PR preferred

· Preferably able to commence immediately

Job Summary:

As an Electrical and Electronic Engineer, you will be responsible for designing, developing, testing, and maintaining electrical systems and electronic equipment. This includes working on components such as circuits, microprocessors, sensors, power generation and distribution systems, and control systems, applying your technical expertise to meet the needs of clients, manufacturers, or specific industries.

Key Responsibilities:

• Designing electrical circuits and systems.
• Creating schematics and layouts.
• Selecting appropriate components and materials.
• Conducting electrical tests and simulations.
• Ensuring designs comply with regulatory standards.
• Collaborating with other engineers to integrate electrical and electronics systems into products.
• Troubleshooting and resolving design issues.
• Preparing technical documentation and reports.
• Managing and maintaining design files and databases.
• Staying current with advancements in electrical and electronics engineering and technology.
• Performing any other tasks assigned.

Key Skills & Qualifications:

Education: Bachelor's degree in Electrical Engineering, Electronic Engineering, Mechatronics, or a related field. A Master's degree or higher is often preferred for senior roles.

Technical Skills:

• Proficiency with electrical engineering software (e.g., AutoCAD, MATLAB, LabVIEW, PSpice, etc.).
• Solid understanding of circuit design, PCB layout, and embedded systems.
• Experience with power electronics, automation, and control systems.
• Familiarity with microprocessors, sensors, IoT devices, and communication protocols (e.g., Bluetooth, Wi-Fi, SPI, I2C).
• Understanding of signal processing, analog and digital electronics.
• Problem-Solving & Analytical Skills:Strong troubleshooting and analytical skills to identify and resolve complex electrical and electronic issues.
• Soft Skills:Excellent communication skills for documentation and reporting, as well as client interaction.
• Ability to work collaboratively in team environments, especially in cross-disciplinary teams.
• Strong time management and organizational skills

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Scope :

- Assume responsibility for technical assignments involving basic or applied research or the design and development of Electrical hardware products. Includes design, fabrication, modification and evaluation of electromechanical devices, components or systems.

- Devise initial concept of assigned device, component or system and participate in the overall detailed Electrical perspective of product design.

- Creates original hardware, circuits, components, software, processes, and models to prove the feasibility of the design approach being investigated. Inclusive of Electronics and PCBA

- Participate in design review by providing inputs relating to DFM and DFA, etc.

- Prepare and release Engineering drawings/schematics while communicating to local vendors to expedite delivery of design parts and assemblies.

- ECO release of engineering documentation.

- Design of AC/DC power distribution systems including selection of circuit breakers, power supplies, contactors and cabling harnesses. Knowledge of PCBA Design, component selection and trouble shooting.

- Develop, test and document designs

- Develops estimates for products and projects. Power consumption, weight, size and schedule.

- Coordinates with manufacturing during pilot run and first production runs to ensure efficient transition from engineering into production.

- Interface effectively with customer to understand technical requirements and propose quality solutions.

- Possesses good electrical troubleshooting skills, and is able to troubleshoot at customer sites.

- Interfaces effectively with other organization such as Purchasing, Marketing, Service, and Quality Assurance as needed to carry out responsibilities

- Assists engineering management in developing schedules and specifications for new and legacy products.

- Maintains a high level of technical competence and state-of-the-art awareness.

- Directs engineering and technical support personnel as required.

- Maintains a high level of technical competence and state-of-the-art awareness.

- Performs other related duties as assigned.

Requirements:

- Degree / Masters in Engineering or requivalent

- 3 – 5 years of relevant experience

- Good working knowledge of electrical systems including motion, temperature measurement, PID loops, and safety interlock circuits.

- Experience working on dynamic electromechanical system design

- Proficient user of orcad, autocad, pcad, Solidworks or similar 3D CAD Software

- Design knowledge on NFPA, Semi Safety Requirements, and Machine safety.

- Good communication and interpersonal skills.

- Good command of written and verbal English

Your Role

• Coordinate design drawings with consultants to comply with requirements of the authorities
• Review and provide solutions to technical problems as well as plan, monitor and report shop drawing production progress
• Prepare technical submissions for materials, construction methods and C&S shop drawings
• Resolve construction issues on drawings and liaise closely with Architectural and M&E teams as well as the authorities
• Supervise a team of BIM Modelers for the production of coordinated shop drawings and Concrete Body Plans

The Requirements

• Possess a Degree in Civil/ Structural Engineering with relevant design working experience with contractors
• Preferably a Professional Engineer registered with the Professional Engineers Board, Singapore
• At least 3 year(s) of working experience in the related field is required for this position.
• Be conversant in British & Singapore Design Standards
• Be independent, analytical, highly motivated with excellent team spirit and interpersonal skills

Skills and experiences required

· Proficient in AUTOCAD & REVIT

· Knowledge of BIM (Building Information Management) will be an added advantage

· Minimum 3 – 5 years of relevant experience working in M&E construction or similar capacity

· Able to work under tight deadlines and schedules

· Meticulous and strong in construction detailing

· MS Office at least to intermediate level

Duties & Responsibilities

· Prepare contract documentation drawings for preliminary, construction and as-built status

· To work with Project Managers, Project Engineers and to co-ordinate with consultants as well as main and sub contractors on interpretation of drawings

· Prepare shop drawings for Mechanical system

· Ensure drawings are compliant with the regulatory specifications

· Ensures qualitative and timely delivery of all drawings and maintain soft copy of archive drawings

· Attend weekly meetings

Qualifications & Other requirements

· Diploma in Mechanical/Electrical / Higher NITEC holders or its equivalent

· Willing to work extended hours and/or on weekends & public holidays when urgently required

· A team player with initiative, drive and a positive attitude

· Singaporean / Singapore PR preferred

· Preferably able to commence immediately

• A Global leader in Intralogistics, Supply chain automation and solutions
• Exposure to industrial trends and technology

About Our Client

The client is a global leader in providing intelligent automation solutions for supply chain, logistics, and material handling industries. With a strong commitment to innovation and excellence, we help our customers optimize their operations and drive efficiency through cutting-edge technologies and services.

Job Description

Key Responsibilities:

• Review project specifications, drawings, and related documents to understand the scope and requirements of the design phase.
• Develop detailed and accurate cost estimates for the design phase, including materials, labor, equipment, software, and other resources.
• Work closely with design, engineering, procurement, and project management teams to ensure alignment between cost estimates and project goals.
• Engage with clients to understand their expectations and provide transparent communication on cost-related matters.
• Identify potential risks and uncertainties that could impact design phase costs.
• Prepare and maintain clear and detailed documentation of cost estimates, ensuring accuracy and accessibility for stakeholders.
• Effectively communicate cost estimates to internal teams, project managers, and clients.

The Successful Applicant

• Bachelor's degree in engineering, logistics, or a related field.
• Proven experience in a similar role, preferably in logistics automation or supply chain solutions.
• Strong analytical and technical skills in Microsoft Excel for precise cost estimation.
• Experience using design software tools (AutoCad, Solidworks, Inventor)
• Excellent communication and collaboration skills.
• Proficiency in relevant software tools for cost estimation and project management.

What's on Offer

To be part of a globally renowned leader in automation solutions, work within a diverse and talented team, access career growth opportunities, receive competitive salary and benefits, and engage in an innovative and dynamic work environment.

Contact

Timothy Huang (Lic No: R1980928/ EA no: 18S9099)

Quote job ref

JN-112024-6585629

Phone number

+65 6416 9863

Michael Page International Pte Ltd | Registration No. 199804751N

Job Description& Responsibilities:

· Responsible for advanced optical module/ethernet product hardware system and circuit design, provide design reviews, drive system/product design trade-offs, make data driven design choices to define product architecture

· Responsible for new product design verification and characterization, conduct high- speed link simulation, failure analysis and debugging in NPI stages to optimize design and ensure performance.

· Work with cross-functional teams to develop new products that are time to market and superior in performance, quality and cost.

· Contribute to optical transceiver module/ethernet product architecture and engineering specifications based on product and customer requirements.

· Perform system performance validation and DVT test plans, debug and analyze test results.

· Provide design documentation and technical reports.

Qualification:

· Bachelor/Master degree or above in electrical or electronics engineering or related fields.

· More than 7 years of working experience in optical module/networking switch or relevant products design and development.

· Sound knowledge of optical transceiver standards, architectures and applications, well understanding of design & trade-offs with respect to size, power consumption, thermal management and manufacturing complexity.

· Solid understanding of high speed signal integrity and power integrity analysis and optimization on PCB/system channel link analysis, well versed in modeling and simulation using tools such as HFSS, ADS, SIWAVE, LTSPICE etc.

· Familiar with high speed digital and analog ICs (CDRs, DSPs, SerDes, TIAs, DC-DC Converters, LDOs).

· Knowledge in IEEE 802.3 Ethernet and PCIe spec will be a plus.

· Extensive experience with lab equipment such as Sampling Scope, RealTime Scope, Protocol Analyzer, BERT, PNA/VNA.

· A solid team player with strong leadership and inter-personal skills, able to take proactive, collaborative and creative approaches to innovate and influence for optimal results.

· Strong written and verbal communication skills.

· Willing to travel as require.

Position : Graphic Designer

• Working day : Mon - Fri ( 9am -6pm)
• Address : Henderson Rd (Bukit Merah)
• Salary : $2600-$3000

Key Responsibilities:

• Conceptualize and Design: Create compelling visual content for websites, social media, advertisements, brochures, product packaging, and other media.
• Brand Identity: Ensure consistency with the brand’s visual identity by following style guides, fonts, and color schemes.
• Collaborate: Work with marketing teams, copywriters, photographers, and project managers to meet the client's or company’s design goals.
• Design Tools: Use software such as Adobe Creative Suite (Photoshop, Illustrator, InDesign) to create and edit graphics.
• Mockups & Prototypes: Design mockups and prototypes to present concepts to clients or teams for feedback before finalizing designs.
• Project Management: Manage multiple projects and deadlines, ensuring timely delivery of high-quality designs.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

At Cheil, we are passionate about ideas that move.

We believe that the right idea will move seamlessly across channels: from online to offline, above the line to below the line, in-store to out-of-home. It will move brands, move products and most importantly, move people. The right idea will move everything forward.

Established in 1973 with headquarters in Seoul, South Korea, Cheil Worldwide is one of the world’s leading integrated marketing communications networks, with more than 7,200 employees globally in more than 54 offices in 46 countries.

For more information, visit us at: www.cheil.com.

We are inviting candidates for the position of:

Content Publishing / Graphic Design Intern (Full-time internship)

Job description

Working with the Samsung Electronics SEA & Oceania business, you will have the privilege of working within a big data environment where strategic decisions are made, guiding best in class upholding brand compliance.

• Content Audit & Analysis: Work closely with the Content Team to conduct content audits on Samsung.com to ensure content is brand compliant and aligns with our strategic objectives.

• Progress Tracking & Reporting: Analyse, track, and report progress on weekly and monthly reports for multi-market operations, providing insights and recommendations for optimization.

• Training Document Management: Prepare and maintain training documents, Standard Operating Procedures (SOPs), and any other necessary documents to support team operations and knowledge transfer.

• Assist in Design Projects: Execute simple design tasks such as key visual adaptations for regional campaigns, ensuring alignment with brand guidelines and creative direction.

• Asset Management: Organize and maintain digital assets, including images, graphics, and other design elements, to facilitate efficient workflow and collaboration within the team.

Desired Skills and Experience

• Good skill in Excel and PPT

• Good skill in Adobe Illustrator and Photoshop

• Pursuing or recently completed a degree in Graphic Design, Visual Communication, or a related field.

• Analytical and quantitative, with strong attention to detail

• Self-starter with excellent communication and collaboration skills, with the ability to work effectively in a team environment.

• Ability to thrive in a fast-paced, ambiguous, interruptive environment

• Ability to work independently as well as work collaboratively toward a common goal

Responsibilities

- create high-quality advertising designs, including posters, brochures, website layouts, social media content, etc., based on client requirements.

- participate in brainstorming sessions to develop creative advertising concepts with the team.

- ensure designs align with brand identity and effectively communicate core messages.

- monitor project progress and maintain effective communication with clients and internal teams.

- stay updated on industry trends and continuously enhance design skills.

Requirements

- Bachelor's degree or higher in Art, Design or a related field.

- A least 15 years of exprience in advertising design, with a strong portfolio preferred.

- Proficient in design tools such as photoshop, illustrator, and InDesign, familiarity with basic animation or video production is a plus.

- Strong aesthetic judgement and creative thinking with the ability to quickly understand client needs.

- Excellent team collaboration skills and the ability to work under pressure.

- Exprience in branding, digital marketing, or cross-media projects is a plus.

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Responsibilities:

• Provide end-user support and operational assistance.
• Troubleshoot and resolve system issues.
• Collaborate with team members for system improvements.
• To provide necessary post-project application software support to the client
• Develop new applications.

Requirements:

• Diploma or Degree in Engineering, Computer Science, IT, or related field.
• 1+ year of relevant experience in end-user support and operations.
• Proficient in Oracle PL/SQL, Oracle Pro-C, Unix ANSI C, Visual Basic .NET, and Unix scripting.

Apply, please kindly email your updated resume to [email protected].

Only shortlisted applicants will be notified.
APBA TG Human Resource Pte Ltd (14C7275) || Akshya R (R24122440)

We are seeking a highly motivated Research or Senior Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. If you are independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges, this is the role for you.

JOB DESCRIPTION

• Develop, test, and maintain enterprise planning systems and applications.
• Analyze complex problems related to resource planning and scheduling, identifying potential solutions, and implementing the most effective one.
• Collaborate with other developers and stakeholders to deliver high-quality software products.
• Deploy software to production environments and provide ongoing maintenance and support to customers.
• Take responsibility for documenting code with technical specifications, user manuals, and other documentation to facilitate understanding and maintenance by other team members.
• Identify and address bottlenecks, inefficiencies, and scalability issues to ensure optimal performance of the software system.

JOB REQUIREMENT

• Bachelor's or Master's Degree in Computer Science or Engineering or relevant disciplines.
• Minimum of 8 years of working experience as a Software Developer/Engineer
• Hands-on experience in Cloud Native Technologies such as microservices, DevSecOps, and Container Platforms
• Proficiency in designing and developing microservices using at least one programming language, preferably C# .NET, Java, or Python
• Good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.
• Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)
• Can-do attitude and willingness to interface with multiple stakeholders.
• Excellent troubleshooting, follow-through, and problem-solving skills, with attention to detail.
• Excellent verbal and written communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• MNC, 5 days, North
• $4000 - $4800, performance bonus
• Career advancement

Job scope:

• Operate and maintain advanced probe card analyzers and QA equipment, ensuring compliance with operational standards and functionality benchmarks.
• Prepare, debug, and validate test files for probe card certification, ensuring alignment with precise technical specifications and quality criteria.
• Conduct in-depth investigations and resolve probe card related issues,employing a methodical approach to diagnose root cause and implement corrective measures.
• Engage proactively with relevant departments to maintain QA readiness for all certification processes, ensuring seamless coordination on quality-related challenges.
• Serve as a liaison with headquarters and customers on new certification processes, offering technicial updates and managing expectations effectively.
• Contribute to the continuous improvement of QA processes, leveraging industry insights to enhance operational efficiency and quality outcomes.
• Take on supplementary duties as required, supporting the team in achieving project goals.

Requirements:

• Minimum a Diploma/Degree in Electronics, Mechanical Engineering or equivalent.
• Knowledge in wafer testing or probe card is an advantage
• Good communication and written skills
• Able to start within short notice will be an advantage

Interested applicants, please send your resume to [email protected]

Job Description

• Industry/ Organization Type: Refrigeration and Air-Conditioning System Provider
• Position Title: Engineer (Sales & Project in HVAC Equipment and Refrigeration system)
• Working Location: East – Ubi (Walking distance from Ubi MRT to the company)
• Working Hours: 5 days (Monday to Friday 8.30 am-5.30 pm)
• Salary Package: Up to SGD 5000 + AWS + Performance Bonus + Commission
• Duration: Permanent

Key Responsibilities

Project

• Design, plan, and manage the testing, commissioning, and supervision of HVAC & Refrigeration projects in accordance with project plans, specifications, and contracts.
• Develop and maintain design documentation, submittals, and re-estimation reports. Ensure thorough project documentation and provide regular updates to management on project status.
• Perform site surveys to determine the placement of pipes, ducts, and control panels, attend site meetings, and ensure adherence to safety regulations while monitoring construction progress.
• Collaborate with consultants, contractors, suppliers, and governing bodies to ensure seamless project execution.
• Execute testing, commissioning, and quality assessments to guarantee the functionality, dependability, and safety of HVAC systems. Troubleshoot, repair, and maintain system components.
• Support clients in enhancing energy efficiency, troubleshooting issues, and offering post-installation assistance.
• Create 2D engineering and electrical diagrams using specialized software.
• Control material and labour expenses to align with budget constraints.

Sales

• Analyze market trends, observe competitor activity, and identify emerging market segments and potential customer profiles.
• Engage with customers, follow up on leads, and nurture client relationships to drive acquisition and retention.
• Formulate and implement sales strategies, negotiate agreements, and provide technical support both before and after sales.
• Compile comprehensive sales reports and work collaboratively with internal teams to ensure seamless delivery of services and customer satisfaction.
• Advocate for the adoption of innovative technologies and participate in ongoing improvement initiatives.

APPLY NOW!!!

• Min. Diploma in Engineering.
• Min 2 years of working experience in sales, servicing or project management for HVAC.
• Strong understanding of mechanical or electrical systems and technologies, with the ability to communicate technical concepts effectively to non-technical audiences.
• Willing to travel overseas as needed for onsite client meetings, presentations, industry events as required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69657 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Sales Representative / Sales Engineer (Fire Pumps)

Working hours: 8.30 am to 5.30 pm on weekdays and 8.30 am to 12.30 pm on Saturdays

Work Schedule: 5.5 days work week during probation and upon confirmation: 5 days a week and one half Saturday a month

Budget Up to $5,000 (Include $800 transport allowance + phone allowance)

Entitled to AWS + Variable Bonus

Office Near to Farrer Park MRT

Requirements:

1. Must be familiar with fire pump and the market for fire safety. In lieu of fire pump experience, must have at least experience with marketing of water pumps
2. Preferably have technical background in the relevant field at least at ITE level in specializations like electrical engineering, mechanical engineering, mechatronics etc.
3. Technicians / engineers with knowledge of the above product who keen to switch to sales role is welcome to apply.
4. Preferably have related sales experience and able to present to customer and consultant
5. Need to have at least class 3 driving licence and own vehicle.

Job Scopes

• Grow the fire pump portfolio
• Prepare quotations and tender submissions
• Attend to sales enquiries, sales support and site related matters
• Update management on the progress of projects
• Visit customers at their work place / office
• Any related ad-hoc duties
• Opportunity to handle the full spectrum of big projects

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

1. Revise and review SOPs
2. Review executed MBR/EBR
3. Support manufacturing team with any quality interpretation , queries and issues.
4. Provide quality oversight (participate GEMBA walk, GMP walk)
5. Perform archival of QO documents
6. Perform IQ and OQ. Involve in URS, design specifications

Email: [email protected]

Whatsapp: 96503173

Telegram: @jesswongie

Jessie Wong Yuan Si

Personnel EA License No.: R2197171

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Electrical Engineer (Marine offshore)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday to Friday 8.30am to 6pm.
• Salary range: S$ 3,500 - 4,200

Job Responsibilities:

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/ BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).
• Any other ad-hoc duties as assigned.

Requirements:

• Diploma or Bachelor’s Degree in Electrical Engineering.
• Hands on experience with vessel mechanical and engine systems.
• Experience with engineering design software.
• Familiarity with maritime HM&E systems and naval construction processes.

☎️ Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Sales Representative / Sales Engineer (Fire Pumps)

Working hours: 8.30 am to 5.30 pm on weekdays and 8.30 am to 12.30 pm on Saturdays

Work Schedule: 5.5 days work week during probation and upon confirmation: 5 days a week and one half Saturday a month

Budget Up to $5,000 (Include $800 transport allowance + phone allowance)

Entitled to AWS + Variable Bonus

Office Near to Farrer Park MRT

Requirements:

1. Must be familiar with fire pump and the market for fire safety. In lieu of fire pump experience, must have at least experience with marketing of water pumps
2. Preferably have technical background in the relevant field at least at ITE level in specializations like electrical engineering, mechanical engineering, mechatronics etc.
3. Technicians / engineers with knowledge of the above product who keen to switch to sales role is welcome to apply.
4. Preferably have related sales experience and able to present to customer and consultant
5. Need to have at least class 3 driving licence and own vehicle.

Job Scopes

• Grow the fire pump portfolio
• Prepare quotations and tender submissions
• Attend to sales enquiries, sales support and site related matters
• Update management on the progress of projects
• Visit customers at their work place / office
• Any related ad-hoc duties
• Opportunity to handle the full spectrum of big projects

Tan Jia Jun | REG No: R23112681
The Supreme HR Advisory Pte Ltd | EA No: 14C7279