Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide coaching, guidance, feedback and training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics
• Min 3 years of relevant work experience in Etch Process or BEOL
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Responsibilities:

• Handling MEMS modules development related project independently.
• Host regular PRS review meeting with project owners of TD integration and Fab module engineers.
• Provide robust recipe to TD PI for new process developing
• Co work with fab module engineers to provide solutions for projects
• Provide risk assessments for new developing projects.
• Continuous improvement

Job Requirements:

• Bachelor degree in any Engineering discipline
• At least 3 years' experience from Etch/Diffusion/Thin Film/Photo process engineer
• Integration experience is a plus
• Capable of using DPE, 7 QC tools, FMEA, SPC, 3L5W, 8D

Design Project Manager - Bringing Creativity to Life with Efficiency

We are seeking a passionate and experienced Design Project Manager to join our team and lead the successful execution of exciting design projects from inception to completion. You will be responsible for overseeing all aspects of the project, from understanding client needs to managing delivery within budget and timeframe.

A Day in the Life:

• Client Relationship Management:

1. Collaborate with clients to clearly define their design aspirations and translate them into a formal design brief.
2. Facilitate seamless communication between the client and internal design team, ensuring client expectations are met and exceeded.
3. Proactively manage client expectations and navigate through any changes or challenges efficiently.

• Project Planning & Execution:

1. Develop comprehensive project plans using MS Project or similar project management software, outlining key milestones, timelines, and resource allocation.
2. Conduct regular meetings with client and internal teams to ensure clear communication, address design queries, and maintain project momentum.
3. Coordinate effectively with internal designers, landlords, architects, engineers, and other stakeholders involved in the project.

• Procurement & Tendering:

1. Identify and recommend qualified consultants to join the project team through a defined RFP process.
2. Assist the client in the tendering process, responding to technical queries, and clarifying project requirements.
3. Evaluate tender submissions, providing well-informed recommendations to the client for informed decision-making.

• Construction & Handover:

1. Facilitate regular stakeholder meetings throughout the construction phase, ensuring open communication and alignment.
2. Document meeting minutes for future reference and action tracking.
3. Manage client change requests, translating them into clear instructions for the project team.
4. Conduct regular site visits to monitor progress, oversee quality control, and address any logistical concerns.
5. Manage testing and commissioning procedures for project readiness.
6. Coordinate final inspections with landlord, consultants and contractors to ensure project compliance.
7. Prepare punch-lists and diligently follow up with contractors to rectify deficiencies.
8. Manage project close-out, including final accounts, handover documentation (as-built drawings, O&M manuals), and training sessions.
9. Oversee reinstatement and move management activities, ensuring a smooth transition to project completion.

What We Are Looking For:

• Minimum of 5 years of experience managing design projects in the Retail/Corporate industry. Junior candidates with demonstrably strong skills and relevant experience in design management may be considered.
• Proven track record of successfully delivering complex design projects on time and within budget.
• Excellent communication, interpersonal, and negotiation skills in both written and verbal formats.
• Strong organizational and time management abilities.
• Proven ability to prioritize tasks, manage multiple projects simultaneously, and adapt to changing circumstances while maintaining deadlines.
• Proficiency in design visualization software (e.g., AutoCAD, Revit), project management software (e.g., MS Project, Primavera), and communication tools (e.g., Microsoft Office Suite). Knowledge of BIM (Building Information Modelling) systems a plus.
• Experience with design procurement and tendering processes.
• Keen understanding of design constructability, able to identify potential constructability issues early in the design process and collaborate with designers to find solutions. Experience working with contractors and understanding how design decisions impact buildability and cost.
• Working knowledge of construction methods, materials, and regulations relevant to the industry. Ability to oversee construction activities, identify potential quality issues, and implement corrective actions promptly.
• PMP certification and/or LEED accreditation highly preferred. Demonstrates commitment to professional development and best practices in project management and sustainability.

Job Summary:

We are seeking an experienced Design Quality Engineer to lead quality initiatives for our thermal cooling solutions in the electronics and computing sectors. The ideal candidate will focus on ensuring design and process quality, driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and cross-functional collaboration, we encourage you to apply.

Key Responsibilities:

• Quality Monitoring & Yield Optimization: Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production.
• Abnormal Quality Management: Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement solutions and preventive actions.
• Process & Quality Control Enhancement: Strengthen internal quality control systems and enhance process capabilities. Lead initiatives aimed at maximizing operational efficiency.
• Customer Quality Assurance: Lead corrective actions for customer-reported quality issues and communicate preventive solutions to stakeholders.
• Inspection Process Optimization: Optimize the quality inspection process by integrating automation and cutting-edge technologies where applicable.
• Cross-Department Collaboration: Promote communication and collaboration between design, production, and other teams to ensure consistent adherence to quality standards.
• Team Leadership: Oversee the quality team’s task assignments, performance, and development, ensuring timely delivery of objectives.

Requirements:

• Bachelor's degree in the related field
• Proven experience in quality engineering, with a focus on manufacturing and design quality.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and industry standards.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

Company Profile

Founded in 2012, ONEPIP is a foreign exchange and payments financial technology company with subsidiaries in Singapore, Hong Kong and Kuala Lumpur. Licensed as a Major Payment Institution by the Money Authority of Singapore (MAS), it operates the ONEPIP Exchange and BidAsk platforms for various client segments based in the Asia-Pacific region.

Job Description

We are a fintech financial institution specialising in currency trade and money transfers and is looking for a highly dynamic Business Analyst to join our Technology Services team.

Think you have experienced it all in a typical systems development life cycle? You’ve not seen ours! A typical day as a Business Analyst is anything but run-of-the-mill. For a start, you will be engaging stakeholders from Hong Kong and Singapore with varying requirements. While translating these requirements to facilitate systems design is an integral part of the role, the ability to conceptualise ideas into innovations that continue to push the envelope will also be an important aspect of the work.

If you are someone who can take challenges in the daily grind by its horn, we are looking for you.

Job Responsibilities

· Assist with the day to day management of the service delivery function which includes the business-related IT functions.

· Work with business users to gather business requirements, perform user acceptance testing (UAT)

· Documentation of test scenarios and test scripts provided by business users

· Analyse compatibility of system and follow up on test defects

· Plan for and oversee preparation of documentation of each project phase (business requirements, functional specification, project plan, test strategy, test plan, etc), training and support in new/modified applications.

· Create clear, accurate and unambiguous technical documentation including detailed test plans, test cases, testing procedures and test results in accordance with company defined standards and methodologies.

· Collaborate and partner closely with business managers, development leads, test leads and production support teams to ensure requirements are gathered correctly and software is tested to highest quality.

Job Requirements

· Diploma/Degree in Computer Science or Information Technology from a recognized institution

· The qualified candidate is expected to have a thorough understanding of software development life cycle and an experience in managing and delivery of the software development in an enterprise environment.

· Working knowledge of testing. Net applications and prior evidence of QA process improvement through automation.

· Successful delivery of client/server and web application project is an advantage.

· Strong analytical, problem solving and documentation skills.

We're looking for a careful and detail oriented design drafter to join our small design office. We value effort in producing quality work, and individuals who aspire to continuously improve themselves on the job.

RESPONSIBILITIES:

1. To produce detailed drawings and space planning using Autocad for Tender & Construction

2. To produce work with neat and quality drawing standards

3. To work closely with designers concerning interior design layouts

4. To identify and communicate potential problems to the team

REQUIREMENTS:

• Singaporean / Permanent Residents

• Minimum 3+ years experience in both design and documentation work for interior scale projects

• Minimum Diploma in Interior Design, or relevant experience

• Software proficiency requirement: Autocad, Sketchup

• Ability to confidently, effectively and clearly communicate both verbally and in writing

Job Description (Paraphrased):

• Collaborate closely with the production team to ensure accurate fabrication that aligns with artwork specifications and implement production feedback into design revisions.
• Perform quality inspections on final products to confirm adherence to client requirements.
• Manage project coordination to ensure seamless execution and delivery.
• Assist with transporting materials and equipment to and from project sites.
• Maintain effective communication with clients, subcontractors, and internal teams, consolidating feedback to meet project deadlines, quality benchmarks, and budget targets.
• Follow established safety protocols and quality assurance standards throughout all processes.
• Foster strong working relationships with clients, subcontractors, and suppliers.
• Prepare and submit necessary regulatory documentation for project approval, including testing, commissioning, and maintenance tasks.
• Translate design briefs from clients or sales teams into tailored artwork concepts.
• Create detailed shop drawings and signage structures using software like Adobe Illustrator, Photoshop, AutoCAD, Flexi, and CorelDraw.
• Finalize artwork for production and ensure designs are ready for printing.
• Oversee the production process, performing ongoing quality checks to ensure alignment with client specifications.
• Handle multiple projects simultaneously, ensuring deadlines are met without compromising design quality or accuracy.
• Maintain thorough project documentation, including correspondence, reports, and site updates.
• Monitor site installations, conduct inspections, and coordinate handovers while managing cross-departmental interactions.
• Perform additional duties as assigned by the company.

Job Requirements (Paraphrased):

• Proficiency in MS Excel, Word, and PowerPoint.
• Excellent interpersonal and communication skills, with the ability to work collaboratively with diverse teams and clients.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

We are expanding! If you have a love for design and have an eye for details, we want you!

We strongly believe in developing talents and providing career progression and we are looking for highly motivated and passionate individuals to join our dynamic and growing company to create elegant and timeless designs.

Join us as an Interior Design Executive and gain exposure through opportunities to work with high-net-worth clients and projects as well as potential collaborations with other leading industry brands.

Responsibilities:

● Develop design proposals, space planning, and FF&E schedule.

● Strong material knowledge and good colour scheme application.

● Produce schematic drawings on AutoCAD and SketchUp.

● Liaising with prospective clients to understand the design brief.

● To work closely with the project management team and to do quality checks to ensure the design is complied and works within a set timeline.

● Assist to coach team of in-house designer/s.

Who are we looking out for:

● Meticulous, detail-oriented with high artistic value.

● Confident, eloquent, and exhibiting good interpersonal skills.

● Able to work independently and self-motivated.

What you can expect out of this job:

● Opportunity to participate in design awards and editorial features.

● Taking on bigger projects as part of job progression.

● Be part of the dynamic creative culture.

Qualifications:

● Proficiency in SketchUp, Photoshop, and AutoCAD.

● Proficiency in Microsoft Excel and PowerPoint.

● At least 3 years of experience in the relevant field.

● Diploma/Degree in Art/Design/Architecture or equivalent.

RESPONSIBLITIES

• Obtain client’s requirement & site survey
• Develop design / detailed drawings
• Prepare design presentation (eg. colour scheme and material board)
• Source competitive quote/materials / samples
• Prepare Construction Specification / Design Documentation
• Update changes and ensure distribution to respective parties
• Participate in site meeting / site & defect inspection

Abilities, Skills & Knowledge (ASK)

• Diploma / Degree in Interior Design
• At least 2-3 years’ experience in designing corporate office projects
• Competent in Autocad, Photoshop, Powerpoint , Excel and any other design software
• Creative conceptual design ability
• Skilled in space planning / conceptual design /interior detailing
• Strong in co-ordination & technical drawing
• Good team player and proactive
• Good communication skill for client management & presentation
• Candidates with more experience will be considered for senior role.
• This is applicable only to Singaporeans and Permanent Residents.

Interested candidates, please apply with your comprehensive resume and design portfolio.

Job Description

• Position: RF Design Engineer
• Well Established Singapore Based Manufacturing MNC
• Working hours: Monday – Friday (8:30am – 6:00pm)
• Salary (commensurate with experience): Up to $6,800
• Working Location: Ang Mo Kio
• Outpatient Medical Insurance Provided
• Duration: Permanent
• Industry: Manufacturing

Main Responsibilities:

• Part of the VSAT product development team involved in designing LNA, Power Amplifier, Up/Down Converter operating up to Ka band frequencies.

Requirements:

• Minimum Degree in Electronics Communication Engineering.
• At least 3 years of experience in any RF system/sub-system design.
• Experience in RF circuit design like LNA, PA, Up/Down Converter, Synthesizer etc.
• Working knowledge of RF test and measurement equipment.
• Experience in using simulation software such as AWR, ADS, HFSS etc.
• Experience in VSAT system or subsystem design is an added advantage.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Descriptions:

• Position : HVAC Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $6,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Engaged in all mechanical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Participated in design and construction document preparation and submissions.
• Conducted technical review and clarifications with customer and suppliers.
• Coordinated design efforts with other engineering disciplines.
• Participated in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Monitor the progress of the document submission.
• Performed some drafting scope and also guide drafters for drafting.

Requirements:

• Minimum Diploma/Degree in Engineering or related field.
• Relevant job experience in oil and gas/process/marine industry preferred.
• Must have basic mechanical design knowledge.
• Proficient in performing HVAC cooling capacity calculations, pressure drop calculations, and duct sizing.
• Experienced in duct installation and HVAC system installation.
• Skilled in creating piping and instrumentation diagrams (PID), Airflow diagrams, and ducting and instrumentation diagrams (DID).
• Knowledgeable in basic pipe sizing, selection, and pipe installation.
• Familiar with basic fire suppression systems.
• Proficient in using AutoCAD for drawing and design.
• Proficient in MS Office applications.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Description

• Position: Senior Mechanical Design Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $7,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Responsible as the lead for the overall Mechanical engineering project activities.
• Responsible for optimized Mechanical engineering man hour utilization within the project.
• Coordinate between the other trades & internal for engineering integration.
• Coordinate with Project Lead on Project Engineering’s & Procurement Schedule.
• Prepare & Review Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities.
• Review Vendors’ Technical Specification/ drawings to ensure completeness & correctness with our requirement.
• Prepare & Review Equipment Parameter & Mandatory Calculation.
• Prepare & Review Piping Schematics (P&ID).
• Prepare & Review Machinery & HVAC Layout, Equipment Installation & Alignment.
• Prepare & Review Mechanical design and construction standard.
• Review 2D and 3D for piping detail and production design.
• Prepare & Review Testing Protocol & Operation Manual.
• Guiding and checking Mechanical engineer activities.

Requirements:

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of relevant work experience in marine/offshore industry machinery and piping new-building engineering design.
• Proficient in AutoCAD, Microsoft Office, and AVEVA.
• Knowledgeable about rules and regulations from Classification Society and Authorities.
• Familiar with the theory and calculations related to marine/offshore mechanical and piping design.
• Strong communication and analytical skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Position Title: Jewellery Design

Location: Orchard

Working Days: 5-day work week, full time employment

Working Hours: 10.45am – 9pm

Salary: $2,400- $3,300

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

Formal training in Jewellery Design

• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Basic I.T. skills are necessary, knowledge of MS Excel and Word
• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

Responsibilities:

• Develop and maintain project schedules in consultation with the project team
• Coordinate and obtain inputs from project team, contractors and suppliers to support the development of project programmes
• Prepare baseline schedule which includes resources, cost loadings, S-curves, Programme Narratives, and scope appreciation presentation
• Work on progress forecast and prepare rolling programmes
• Update, track and report project progress against planned schedule
• Monitor and control progress to make sure that turnover and cost is in line with master construction program
• Ensure timely submission of materials with approvals
• Ensure project orders and deliveries are in accordance to agreed schedules
• Assist in the overall interfacing and coordination works as and when required

Requirements

• Degree in Civil / Structural Engineering recognized by Professional Engineers Board (PEB) Singapore or Building and Construction Authority (BCA)
• Good understanding of construction industry practices and standards to perform planning and scheduling
• Experience in LTA programme preparation, programme requirements and submissions
• At least 3 years’ experience in large scale projects with hands on experience doing planning and scheduling for civil and building projects
• Candidate with more experience will be considered for a senior role
• Proficient in planning software such as Primavera P6 and Microsoft Project
• Candidate with 4D BIM knowledge will have an added advantage
• Highly motivated, self-driven with initiatives to work independently to produce programmes, narrative and histograms
• Meticulous, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment

Information provided in response to this job advertisement will be treated in strict confidence and be used for recruitment purpose only.

We invite candidates who have experience in designing office spaces to apply.

Job Description

• High degree of expertise in corporate interior space planning.
• Develop and execute high quality corporate office interior design concepts.
• Create and formulate design presentation strategies.
• Enjoy client-facing presentations with excellent client liaison skills.
• Oversee interior design process for entire project consistent with project timeline, budget and program.
• Ability to coordinate material and colour selection, interior construction administration and installation.
• To be able to muilti-task and enjoy working in a multi-cultural environment.
• Coordinate with all internal and external parties related to the project.

Requirement

• Minimum 10 years' experience in corporate interior design and interior achitecture.
• BS or BA in Interior Design, Interior Architecture or equivalent in experience.
• Possess excellent design flair, highly creative with a good eye for design details.
• Work with speed and meet project deadlines.
• Passionate about corporate office interior design and public spaces.
• Strong design portfolio in corporate office interior design.
• Excellent time management, organizational skills and communication skills.
• Highly efficient in AutoCad and Microsoft Office tools.

• Preferrably with experience in fire protection systems
• Drafting, drawings, Tender BQ
• Project management includes preparing, scheduling, coordinating, monitoring etc.
• Project administration, quotation, progress claim, PTW, SIC etc.
• Hardworking and independent, willing to learn
• Proficiency with MS Office & CAD
• Strong organizational and communication skills
• Strong ability to multitask
• Comfort working with multiple groups within business

• Managing the planning and design stages of construction projects.
• Contributing technical expertise to project drawings and designs.
• Performing cost calculations and preparing financial projections.
• Preparing work schedules in collaboration with the project manager.
• Liaising between contractors, subcontractors, vendors, and suppliers.
• Overseeing construction engineering processes.
• Performing regular tests on materials and procedures to ensure compliance with industry regulations.
• Ensuring that the construction project is completed on time and within budget.
• Documenting processes and keeping detailed construction logs.
• Presenting construction project progress updates to clients and senior managers.

Responsibilities:

1. To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance.
2. To monitor the safe process flow and backlog level of TIW waste.
3. Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs.
4. To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services.
5. To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost.
6. Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
7. Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management.

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Remuneration:

• Basic salary: $3,400 – $3,800
• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• AWS & VB
• Sign-on bonus

Responsibilities:

• The successful candidate for this role is expected to have a strong background in Regression and end-to-end Testing, with a deep understanding of JSON, API, and SQL. Familiarity with financial instruments and entities will be considered a plus.

• This role requires an individual who is a fast learner, able to quickly comprehend business requirements and translate them into effective test cases using our in-house automated regression tools.

Skillset (Must have)

• Proven experience as a Software Test Engineer or similar role.

• Proficient in JSON, API, and SQL.

• Experience in regression and end-to-end testing.

• Strong problem solving skill and attention to detail.

• Excellent communication skill.

• Ability to learn quickly and work in a fast-paced environment.

• Experience in writing clear, concise, and comprehensive test plans and test cases.

• Willingness to support BAU operations as needed.

Skillset (Good to have)

• Familiarity with financial instruments and entities.

• Experience with performance testing.

• Knowledge of Agile/Scrum development principles.

• Experience with automated testing tools.

• Understanding of coding and scripting for automation purposes.

• Knowledge of continuous integration and continuous delivery (CI/CD) processes.

• Familiarity with version control systems like Git.

• Knowledge of software QA methodologies, tools, and processes.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

830am-6pm

Permanent, 5 days, Yishun

Our client

A MNC in airconditioning industry

Job scope

• First point of contact for new product (Chiller) before dispatching to customer site( (Testing)
• To handle commercial air cooled and water cooled chiller customer complaints
• Hands on technical fault rectification and preventive maintenance, testing n commissioning
• Involve in the entire product cycle from research n development to after sales service
• Documentation update and closing of service log.

Requirements:

Diploma in Mechanical Engineering

2 years of technical experience with knowledge in air-conditioning, chiller, ACMV or HVAC systems

Proficient with testing for new product implementation (NPI)

Added advantage

Class 3 driving license

District cooling project

Large commercial building project

Job Summary

The role involves offering overarching guidance to ensure the successful completion of a project while maintaining adherence to the quality standards established by the company. Responsibilities include, but are not limited to, identifying critical aspects of project execution and proactively addressing potential issues before they arise. Additionally, the position requires the verification and management of man-hour consumption across various disciplines throughout the project's duration.

Duties & Responsibilities

• Involvement in projects with budgets that start at $3 million and can exceed $20 million.

• Assist Senior Project Engineer to oversee the planning, scheduling, execution, and coordination of the technical aspects of projects.

• Facilitate collaboration between various disciplines, including procurement and construction teams.

• Coordinate cost estimation for Engineering, Procurement, and Construction (EPC) activities.

• Maintain regular communication with assigned project clients to facilitate their engagement throughout the implementation process.

• Participate in client meetings to address and resolve project-related issues effectively.

• Oversee project documentation and manage design changes.

• Ensure the seamless execution of projects in alignment with established strategies and objectives across all phases, including feasibility studies, front-end engineering design (FEED), detailed design, construction, commissioning, start-up, and project handover.

• Guarantee that projects adhere to safety, cost, schedule, and quality standards.

• Conduct comprehensive contract reviews, risk assessments, and develop contingency plans.

• Organize proposal and project task forces, as well as allocate staff effectively.

• Initiate kick-off meetings with clients and internal teams.

• Prepare and analyse the overall budget cost plan.

• Monitor and evaluate project operations and timelines.

• Act as the company representative in interactions with clients.

• Develop project specifications and establish systems or processes for effective project execution.

Key Requirements

• Bachelor’s degree in mechanical engineering or a related engineering discipline, with minimum of 3 to 5 years of experience

• Comprehensive understanding of various engineering disciplines, including Process Technical knowledge.

Knowledge & Skills

• Proficient in Basic Design and Piping and Instrumentation Diagrams (P&ID).

• Familiarity with project management fundamentals, front-end engineering FEED, and relevant planning and scheduling tools is preferred.

• Demonstrated success in EPC Project Management within the Oil & Gas and Petrochemical sectors.

• A team-oriented individual who excels in collaboration, showcasing strong communication and interpersonal abilities, alongside outstanding presentation, technical, analytical, and troubleshooting skills.

• Highly self-driven, with the capacity to proactively create plans and carry out tasks with professionalism, diligence, and efficiency, while adhering to established company protocols.

• Design, develop, test, and implement Tableau dashboards and visualizations
• Supporting Business dashboards, projects, and ad-hoc requests
• Manage portfolio of existing and future Tableau dashboards and deliverables (data preparation, security design, access management, data visualizations design, testing, optimization and automation, enhancement roadmap, portfolio catalog, development prioritization, user adoption and training)
• Lead the implementation of enhanced dashboard access and data sharing security framework for Business dashboards requirements
• Deliver meaningful insights, trends, and analysis across all Business areas using a variety of internal and external data sources
• Participate in gathering requirements and consulting with customers to understand business problems and find the best way to visualize outcomes
• Participate in cross-functional projects
• Translate analysis outcomes into compelling data visualizations that are intuitive and prompt insights and actions
• Use data to tell stories by creating visually appealing reports, Tableau dashboards, and presentations for our internal customers

Job requirement

• Bachelor Degree in Computer Science or Information technology
• Basic knowledge of products, services and channels in fin tech industry
• Strong background in database concept.
• Expert in Data Visualization tools (e.g. Tableau, QlikView, Power BI etc.)

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform -

https://sg.go.persolkelly.com/job/details/10579

We regret to inform that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E
EA License No. 01C4394 • EA Registration No. R1105286 (Ngiam Xinyi)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Jiangsu Miracle Logistics System Engineering Co., Ltd. is located in Wuxi, a famous city in regions south of the Yangtze River. Founded in 1984 and listed on the Shenzhen Stock Exchange in June 2004, it is the earliest listed company in the industry in China. Its technology and sales rank first in the industry in China.

Currently, we need to recruit college students majoring in chemical engineering, lithium batteries, materials, and energy, battery remanfacture.