Physical Design Engineer

Experience : 5+ Years

Salary Range :SGD 7000-10000

Skills & Technical Expertise Required:

Netlist to GDSII at block level, Subsystem Level and at Full chip.

Worked on multiple tapeouts on Netlist to GDSII

Hierarchical partitioning and budgeting of block-level subsystems.

Implementation of high performance (HP) cores, low power designs

Node experience upto 3nm,7nm, 10nm, 14nm, 28nm.

Timing Signoff in loop through STA and ECO cycle at block and at interface.

Block level floor planning, power planning and IR drop analysis.

Scan chain reordering / Scan Chain repartitioning

CTS expertise and clock tree constraints creation for meeting specifications

MMMC optimization at Block and Sub-System Level

Timing closure with Crosstalk and AOCV / POCV

TCL scripting to fundamentally understand tool usage.

Mandatory EDA Skills

PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

We have an exciting position in the explosive growth area of Data Center Enterprise Storage. In this role you will be responsible for
developing the most advanced semiconductor devices to support stringent high capacity storage needs across all the top tier service
providers. Our IC R&D team is looking for an experienced physical design engineer to develop high speed custom analog/mixed signal
products for the storage industry. A qualified applicant would work closely with circuit design engineers to lay out high-speed custom analog
designs and develop mask layouts for customer products, as well as printed circuit board designs. You will join a cross-functional team
responsible for developing leading edge high-speed custom IC products that ultimately achieve high volume production.

Job Responsibilities
- Lay out high speed, high performance analog/mixed-signal custom integrated circuits
- Work directly with a team of engineers to determine floor plan, routing and I/O requirements
- Perform IC design rule and connectivity verification and drive products through mask release flows.
- Contribute to methodology improvements to increase layout and verification efficiency.
- Create reticle layouts, documentation, and PO’s to release products for mask build.
- Complete PCB layouts for test hardware.

Requirements/Qualifications should be:
- Bachelor's degree in Electrical Engineering (or related field)
- 5 years experience in custom analog IC physical design
- Experience with schematic-driven layout, floor planning, chip level routing, design for manufacturing and design rule and connectivity
verification is preferred
- Experience using Cadence Virtuoso XL preferred
- Experience with Cadence Allegro for PCB layout preferred
- Familiarity with both analog and digital layout tools and flows, circuit design concepts and IC manufacturing processes desired
- Strong communication skills
- Understanding of silicon process technologies (CMOS and Bipolar) and device physics would be a plus.
- Proven analytical skills (application of math and physics to solve problems)
- Must be meticulous and demonstrate attention to detail.

Responsibilities :

• Conduct equipment design & development work according to customers and internal specifications.
• Act as project lead to plan, organize and co-ordinate their respective project’s meetings to review design and ensure projects are kept to schedule.
• Maintain and control relevant documents related to R & D activities per requirements.
• Maintain, keep track, and ensure Billed Materials is updated.
• Generate detailed 2D/3D drawings.
• Raise ECN for update of changes to design and drawings and follow up on approval and ECN flow.
• Provide technical support to process & production, supply chain & QA for review and troubleshooting of design and drawings.

Requirements:

• Bachelor’s degree or master’s degree in mechanical engineering or relevant disciplines.
• At least 4 years of relevant experience in semiconductor or automation equipment design.
• Proficient in Microsoft Office applications (Words, Excel, PowerPoint)
• Strong understanding of mechanical engineering principles and engineering techniques are required.
• Plentiful experience of mechanical designs using SolidWorks is preferred. Candidate with Autodesk/Auto CAD Software will be an advantage.
• Solid knowledge and experience in material properties are required.
• Good communication, time management, problem-solving and decision-making skills.
• Willing to travel for overseas projects if required.

How to Apply:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to diana.pang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Pang Seng Leng Diana

EA Personnel Reg No: R1106651

Job Description:

• Responsible for analog/hybrid circuit program planning and design implementation, performance optimization, simulation verification and testing related work;
• Responsible for the design of high-performance, ultra-low voltage customized circuits under advanced technology. Targeting specific PPA requirements, able to select transistors, layout
• Effect analysis, unit logic merging and simplification, and starting from the underlying optimization thinking, deliver digital units or modules that can be integrated;
• Responsible for the physical design, analog/digital chip layout design of advanced technology digital ASIC/AI/CPU chips, and the exploration of new technologies such as PPAC optimization, fully customized design, and advanced packaging under advanced technology;
• Write various design documents and standardized materials, and implement the company's development processes, specifications and systems.
• Work tasks include but are not limited to:
• Commonly used analog chip or IP design, transistor-level circuit design and simulation, layout planning and design, timing library characterization extraction, SRAM custom design, etc.
• From gate-level netlist to back-end physical implementation of GDSII, digital/analog chip layout design, including PR, PV, IR Signoff, PPAC optimization, Sta/Spice Signoff, etc.;
• Chip design process development, In-House EDA tool development, chip yield tracking and optimization;

Requirements:

• Majors include but are not limited to mathematics/physics/electronic science and technology/microelectronics/information and communication engineering/computer science and technology/materials science and engineering fresh college students or overseas students within one year of graduation , master's degree or above;
• Excellent academic performance, strong curiosity, learning ability and knowledge transfer ability for new things and knowledge in professional and related fields;
• Understand the IC development process, and have a certain theoretical foundation and necessary capabilities of digital circuits as well as innovation capabilities.

Our client is a leader in semiconductor manufacturing equipments, providing designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking requirements. They are hiring for Senior Mechanical Design Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Senior Mechanical Design Engineer

Responsibilities:

Design and develop series of marking/inspection/ sorting/customised semiconductor equipment to meet the processing and automation needs of customers. Main duties involve

• Design standardization
• Costing and project management
• Machine and module conceptualization design
• Design for manufacturing (DFM), design for assembly (DFA) and Concurrent engineering
• Pneumatic/ hydraulic circuit design
• Detail fabrication drawings, assembly drawings and layout drawings
• Selection and sizing of standard components available off the shelf
• Undertake new product development or be involved in sustaining engineering/CIPs

Requirements:

• Bachelor/ Master of Engineering with minimum 5 years relevant experience
• 3D solid Modeling, preferably Pro-E (others like Solid Edge, Auto Inventor, Mechanical Desktop, Solid Designer are also acceptable).
• Strong project management skills
• Good track record in:

1. Ultra High Precision machine design
2. High Speed Pick and Place mechanism design
3. Structural, kinematics and dynamic analysis and FEA simulation
4. Geometrical tolerance and dimensional analysis (e.g. stack up error)
5. Engineering material selection
6. Design troubleshooting
7. Application of analysis tools like FMEA, DOE

Our client is a leader in semiconductor manufacturing equipments, providing designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking requirements. They are hiring for Senior Software Design Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Senior Software Design Engineer

Responsibilities:

• Design and develop software for automated semi-conductor process equipment.
• Improve equipment performance through CIPs and other development initiatives.
• Support field work to upgrade and resolve customer issues.

Requirements:

• Minimum Degree in Electrical & Electronics Engineering/Computer Studies or it’s equivalent.
• At least 5 years’ experience in programming on Windows (XP and above) environment.
• Good experience in C++, VC++, MFC, SQL and OOP.
• Good knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.
• Knowledge in PLC will be an added advantage.
• Strong analytical and problem-solving skills.
• Excellent team player.

The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural). Preferably have done data centre, marine offshore, and mixed-development projects.
• Have completed at least 1 project (data centre, commercial bldg., industrial)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

As a fast-paced, growing business; this role will be responsible for significantly contributing to projects to deliver excellent service levels to clients and assist in the ongoing development and growth of the business, whilst providing sound technical, design and contract management support.

They should comply with B&W Engineering’s standards, procedures, process and implementations to ensure project requirements and clients’ specifications are fully met. Have the ability to demonstrate extensive experience in a wide range of technical areas and have a sound level of knowledge at Senior Engineer level.

Desirable experience would include the management of Data Centre projects..

Role Responsibilities and Requirements

Degree or higher in appropriate engineering discipline or have sufficient equivalent experience.

IES Electrical and Electronics Engineering Professional Membership desirable.

Singapore Professional Engineer registration or progress towards beneficial.

Proven experience in working within and running projects within a multi-disciplinary team with the successful delivery of the design for critical projects.

Experience in project management and MEP engineering track record with some experience of data centres or other critical engineering facilities.

Knowledge of MS Office applications Outlook, word, excel, PowerPoint etc

Knowledge of Dialux, Trimble (Amtech) Etap /AutoCAD/Revit/ BIM/CAD calculation software.

Ability to use IT based calculation and spreadsheet software.

Significant experience in production of drawings, calculations, schedules & specifications for a range of building types

At least 5 years overall experience with 3 years Data Centre design

Broad design experience across Commercial, High Rise, Hotels & Leisure would be beneficial

Demonstrate a thorough understanding of the design process.

Peripheral experience in architecture, structures, civils, security and permitting.

Excellent understanding of the various code requirements and standards across the APAC region.

Sound knowledge of key Health and Safety issues and legislation including Singapore Design for Safety (Dfs)

Ability to keep clear and accurate records and reports.

Understand and maintain the long-term goals of the business.

Understand the company QA process, maintain and contribute to the same standards across the APAC region

Ability to work autonomously, as part of a wider team.

Ability to embrace an intensively collaborative design environment working for and reporting daily to an expert client.

Ability to proactively step outside the role of conventional design regiment and stages to achieve the client’s deliverables.

Flexible and willing to travel to service international projects and customers.

Possess exceptional clear communication skills and command of spoken/written English.

Have an appreciation of different cultures/races and embrace the same.

Be a motivated, highly dependable

Maintain an appropriate knowledge of industry initiatives.

Job Description:

1. Contribute to defining product specifications, microarchitecture, and implementation for high-speed memory interfaces.

2. Perform RTL coding, LINT checks, and initial testing of designs.

3. Collaborate with the verification team for debugging in the lab.

4. Work closely with the software team and/or customers to troubleshoot, debug, and optimize system performance.

Job Requirements:

1. Bachelor’s degree in Communications, Electronic, or Computer Engineering;

2. 6 of experience in ASIC design, with a strong understanding of the ASIC development process.

3. Proficiency in Verilog HDL coding and EDA tools for synthesis and timing analysis.

4. Experience with high-speed interfaces (e.g., DDR, SerDes, PCIe) is a plus.

5. Strong problem-solving skills and the ability to deliver results within deadlines.

6. Excellent organizational and communication skills.

Interested candidate please send your resume to [email protected]

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

• Build blazing fast page speeds
• Build reusable components/primitives
• Delightful user interactions and affordances
• Work with the team to review PR, and make the codebase robust.

Job Requirements

• 5 years experience at tech startups with millions of DAUs
• Solid knowledge of TypeScript, and experience with Next.js, etc.
• Basic backend skills with Node.js, building REST APIs, working with databases
• Knowledge in Bitcoin and mining concepts
• Strong written and verbal communication skills

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

• Responsible for detailing and drafting precast concrete components for construction projects to ensure the successful production and installation of precast elements that meet project specifications, structural requirements and quality standards.
• Develop precast layout and fabrication shop drawings of precast elements for submission and production.
• Prepare reinforcement detailing and bar bending schedule.
• Ensure shop drawings are clear, accurate, and in accordance with project requirements, standard and project timelines.
• Incorporate openings, recesses, architectural features, cast in items, lifting system and other relevant information in shop drawings (2D & 3D).
• Raise RFI to finalize precast shop drawings.
• Coordinate with site team concerning on drawing details and technical issues to ease production as well as installation on site.
• Work closely with production and suppliers on the submission/issuance of shop drawings, highlight technical issues and keep them updated of any revisions.
• Attend technical meetings with consultants/clients as and when required.
• Perform any ad-hoc duties assigned.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Possess extensive knowledge of power plant systems and operations, along with strong leadership skills to lead a small team of engineers and technicians. This role is crucial for ensuring that all plant engineering tasks are executed correctly. The successful candidate will oversee plant engineering designs to guarantee that the plant operates efficiently and safely.

Key Responsibilities:

• Responsible for plant engineering design activities for power plant project including cable sizing calculation, cable routing, connection drawing, loop drawings, termination diagrams
• Work with 3D design team for 2D deliverables
• Lead, mentor, and manage a small team of engineers and technical staff
• Collaborate with different parties for plant engineering coordination and support site inspection
• Provide technical support for project manager for project engineering milestone deliveries
• Support purchasing team for technical evaluation and price optimization

Desired Characteristics:

• Knowledge of onshore power plant design engineering, prefer to have work exp in Singapore.
• Experience in coordination, leading and managing plant engineering teams.
• Familiar with complicated cable tray route, cable tray support engineering design, equipment layout, installation materials, cable glands selection, cable drum schedule, cable route schedule, cable termination material, and so on.
• Proficiency in relevant engineering software and tools, such as Revit, Navisworks, Autocad
• Min 6 years experience in Electrical composite plant project

Duration: 6 months (may be extendable)
Work Location: Ayer Rajah
Working hours: 8hours a day, 5 days a week

This is 12 - months Contract (extendable + convertible)

Location: The Alpha, Science Park

Normal working hours

Essential Responsibilities:

• Carry out detail engineering task for water and wastewater treatment plant to full fill business obligation e.g. On-time delivery, Satisfy contract specification or industrial standard and bring value to customer. Work shall include but not limited to the following:
• Prepare sketches on P&IDs Drawing
• Prepare sketches on Fabrication Drawing
• Prepare sketches on Equipment Layout Drawing
• Prepare sketches on Pipe Routing Drawing
• Prepare equipment and material datasheet
• Perform equipment sizing calculation
• Perform pipe sizing calculation
• Perform hydraulic calculation
• Perform pipe stress analysis
• Perform material take off
• Raise purchase requisition
• Check and sign off engineering design
• Work together with in-house design team aboard to meet engineering deliverable.
• Contribute to value engineering to drive cost down.
• Evaluate vendor quote and provide input on vendor selection.
• Support business initiative to bid and win job as required.
• Support Project Management/ Construction Team on construction activities as required.
• Support Commissioning Team on commissioning activities as required.

Qualifications/Requirements:

• Bachelor Degree in Chemical/Mechanical/ Electrical Engineering
• Minimum 3- 5 years working experiences in design of water and wastewater
• Highly motivated and able to work under pressure
• Experience in construction, test and commission, and operation of water and wastewater plant is a plus point
• Well versed in MS Excel, MS Word, and MS PowerPoint
• Familiar in MS SharePoint, MS Team, and Naviswork
• Ability to operate AutoCAD and SAP is a plus point

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform you that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use, and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E

• EA License No. 01C4394

• Registration No. R23112260 (MayThinKyu)

Are you a talented Civil and Structural Engineer looking to take your career to new heights? We have an exciting opportunity that offers a generous remuneration package, unparalleled professional development prospects, and a clear path for upward progression.

The Role

The role reports directly to the team lead. He or She is responsible for supporting the Professional Engineers on the design and supervision of new erections, addition and alteration (A&A) work to existing buildings, earth retaining and stabilising systems, specialist designs for the facade, glass, demolition works etc, as well as temporary works. The role may also be required to conduct site inspections.

Responsibilities:

• Carry out detailed analysis and design of civil, structural, and geotechnical works;
• Prepare design calculation reports and structural drawings for authorities' submissions;
• Coordinate with various stakeholders such as clients, consultants, and contractors for projects; and
• Supervise and inspect construction works;

Requirements:

• Degree in Civil/Structural Engineering from a recognized Institution;
• Strong engineering fundamentals and analytical skills in geotechnical and structural analysis and design work would be an advantage;
• A good knowledge of the application of design and drafting software such as Autocad, Staad Pro, Plaxis, Prota, and Tedds would be an advantage;
• Candidates without working experience are welcome to apply.
• For more senior positions, at least 3 years of design experience for executive engineers and at least 5 years of design experience for senior engineers.
• Passing FEE 1 and FEE 2 are an advantage.

Vision:

To be a Civil & Structural (C&S) Consultancy firm recognised for innovative engineering solutions that are created in the course of work.

Mission:

To engineer construction solutions that create new values for all building stakeholders.

Benefits:

• Flexibenefits, Medical, rand Dental
• 13th AWS and Performance Bonus
• Group Insurance
• Training Grant and Education support,
• Miscellaneous allowance,
• Blue Sky Friday
• Bonding Events

Working Hours:

Regular hours, Mondays - Fridays

Dress Code:

Business (e.g. Shirts), Dress Down Day -Friday

Job Summary:

Based in our Singapore office, you will join our IC Lab team as a Verification Engineer. In this role, you will develop and implement advanced verification methodologies, including UVM, SystemVerilog, and SVA, for cutting-edge projects. You will also work with platforms like Palladium Z1, HAPS, and Zebu to deliver high-quality verification solutions.

What you will be responsible for:

• Apply UVM (Universal Verification Methodology), SystemVerilog, Verilog, and SVA (SystemVerilog Assertions) languages in verification tasks
• Develop and implement state-of-the-art verification methodologies, including UVM, C/C++, co-simulation, system emulation, and mixed-mode simulation/emulation
• Contribute to projects requiring advanced verification tools such as Palladium Z1, HAPS, and Zebu platforms
• Collaborate effectively within a team, ensuring high-quality deliverables

How you will stand out:

• Possesses a Masters or Bachelors degree in Electrical Engineering or Computer Engineering
• At least 3 years of relevant experience
• Proficient in UVM, SystemVerilog, Verilog, and SVA languages
• Strong knowledge in protocols such as SPI, UART, and I2C
• Possesses knowledge of firmware development and in depth understanding of firmware development processes
• Excellent team player with strong communication skills.
• Highly driven and detail-oriented.
• Has experience working with advanced verification platforms like Palladium Z1, HAPS, or Zebu.

What you will experience working with us:

• A culture that values authenticity and diversity of thoughts and backgrounds;
• An inclusive and respectable environment with open workspaces and exciting start-up spirit;
• Fast-growing company with the chance to network with industrial pioneers and enthusiasts;
• Ability to contribute directly and make an impact on the future of the digital asset industry;
• Involvement in new projects, developing processes/systems;
• Personal accountability, autonomy, fast growth, and learning opportunities;
• Attractive welfare benefits and developmental opportunities such as training and mentoring.

--------------------------------------------------------------------

Bitdeer is committed to providing equal employment opportunities in accordance with country, state, and local laws. Bitdeer does not discriminate against employees or applicants based on conditions such as race, colour, gender identity and/or expression, sexual orientation, marital and/or parental status, religion, political opinion, nationality, ethnic background or social origin, social status, disability, age, indigenous status, and union.

Job Description

As part of our system Engineering team, you play a key role in the design and development of our Inspection and Metrology machines. In your role you will work hands-on on the mechanical integration, process optimization and automation of the machine. Your work will involve integration of the mechatronic, optical and software building blocks and will hence work closely together with Mechanical design, Hardware, Optics and software teams.

It is your job to analyze customer requirements, build up a deep understanding of the problem and translate these into automated solutions that you detail clearly in measurable design requirements. To verify the solutions, you will build and test high-speed mechatronic setups for spec validation and critical parameter analysis. Once these are confirmed, you will coordinate the design and implementation in the different teams to eventually integrate tested modules and building blocks in the machine and assess the impact of the integration on the overall machine performance.

You get the chance to confirm high speed Pick and Place handling capabilities at key customers on site and broaden your customer and application know how along the way.

Furthermore you seek the challenge of understanding, analyzing, (re-)defining, and implementing sophisticated material handling flows until the level of detailed micro-sequences.

You will often write PLC level test sequences for mockup validation and data collection. Once the system is validated, translate these sequences into SW requirements.

As a senior system Engineer, you are considered as project/product owner. That means, besides technical work, you will also lead a multi-disciplinary team on project/product basis. You need to consider both technical but also commercial (e.g. budget, timeline, resource) aspects while managing your project/product.

Minimum Qualifications

• MS degree or BS degree with outstanding skill in electro-mechanical, electronics, software or mechanical engineering; with sound knowledge on basic software logics
• 5+ years relevant experience in an automation oriented engineering role in a high-end equipment company, covering most of following technical domains: machine conceptual and mechanical design, setting up specifications, PLC controller hardware and software design, user interface, SW (describing, testing of flows), conversion, test protocols, debugging, characterization, lead improvement projects
• Strong analytical capabilities
• Programming skills are a plus (PLC controllers, C, C++ Python, VBA, …)
• Independent thinking, challenging existing ideas and approaches
• Hands-on, self-organized, taking initiative and ownership
• Occasional travel within Asia & Europe
• Proficient in English

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: North-East

Job Description:

• Design and implement software solutions for automated semiconductor process equipment.
• Enhance equipment performance by implementing Continuous Improvement Processes (CIPs) and other development initiatives.
• Provide field support for upgrades and resolution of customer issues.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Job Responsibilities:

1. Assisting and supporting technical sales team in terms of scope of supplies and costing with respect to electrical, automation requirements during the prospecting stage for water/wastewater related systems and projects.
2. Liaising and communicating with agents/distributors/OEM partners/end-user customers on technical details and specifications of parts and components where EICA works are concerned.
3. Design and producing electrical, control panel drawings (AutoCAD or Eplan), BOM list generation and hardware component selection.
4. Developing PLC programming & HMI project (Siemens /Allen Bradley etc) for all process and functional controls of water/wastewater related systems and instrument.
5. Liaising, negotiating, and managing sub-suppliers/sub-contractors in Singapore and in the region with respect to procurements of all wiring and cabling works, fabrication and assembly of control panels for systems as well as for in-situ installation of water/wastewater related systems or projects.
6. Determining and monitoring procurement and production progress and schedules where cabling and wiring works, control panels’ PLC works and supplies are concerned.
7. On site electrical installation supervision, electrical panel testing, instrumentation configuration, loop test and automation commissioning works.
8. Compiling and handing over operation and maintenance (O&M) manuals (electrical and PLC portions etc) to our agents/distributors and end-user customers.

Requirements:

• Diploma / Degree in Electrical Engineering or Computer Science.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Minimum 5 to 8 years of working experience in Water Industry or engineering projects would be advantageous.
• Knowledge of PLC programming (Siemens /Allen Bradley etc)
• Willingness to travel locally or to regional countries occasionally for site installation, trouble-shooting or testing and commissioning duties at clients' project sites
• Able to work independently and a good team player.
• Senior position will be considered for candidates with more experience.
• Candidate who are able to start work within short notice or immediately would be advantageous.

Job Description:
We are looking for a skilled Automation Engineer with expertise in PLC design and programming to support the testing and commissioning of equipment and machinery for the food & beverage and chemical industries.

Key Responsibilities:

• Design and program PLC systems for automated equipment and machinery.
• Perform testing, troubleshooting, and commissioning to ensure system functionality and reliability.
• Collaborate with cross-functional teams to deliver customized automation solutions.
• Provide technical support and training to clients during and after project implementation.
• Ensure compliance with industry standards and safety regulations.

Requirements:

• Diploma/Degree in Electrical, Automation Engineering, or related fields.
• Proficiency in PLC programming (e.g., Siemens, Allen Bradley, or similar).
• Experience in testing and commissioning industrial equipment.
• Knowledge of automation systems in the food & beverage or chemical industries is an advantage.
• Strong problem-solving skills and a hands-on approach.

License No: 23S1595

Registration No: R23116355

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Hi our Client is looking for a dynamic Chip Design Engineer to be part of their team.

Job Description

1. Design and implement high-speed memory interfaces and circuits.

2. Deliver AMS circuits in SerDes and evaluate circuit topologies.

3. Develop and optimize high-speed interface modules (e.g., bandgap, bias circuits,LDOs, ADCs, DACs, oscillators, filters, Tx/Rx equalizers, and serializers/deserializers).

4. Collaborate with the verification team to debug in the lab.

5. Work with software teams and customers to troubleshoot and enhance system performance.

Job Requirements:

1. Bachelor's in Communications, Electronic, or Computer Engineering;

2. Min 4 yrs working experience in ASIC design, with knowledge of the ASIC development process.

3. Proficiency in AMS circuit design and Electronis Design Automation tools.

4. Experience with high-speed interfaces (e.g., DDR, SerDes, PCIe) is a plus.

Interested candidate please email your resume to [email protected]