Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

IC Designer, designing high frequency circuits targeting for transceiver applications, employing CMOS technology. The candidate needs to come up with novel architecture with speed, power, and area advantage compared to existing architecture.

The job also includes circuit design, pre and post-layout simulation, mask layout and PCB testing.

Qualifications

• Bachelor or Master degree in Electrical Engineering.
• Experience in EDA tools usage, including Cadence, Spectre, EMX, Synopsys, as well as Matlab.
• Some knowledge on communication system, such as BER, eye diagram, modulation/demodulation, pre-emphasis and etc.
• Open to Fixed Term Contract.

MAIN DUTIES AND RESPONSIBILITIES:

Design and develop high-precision semiconductor equipment to meet the processing and automation needs of customers. To succeed in this position, you need to:

· Understand the design specification given to you by the design lead.

· Understand the company’s design standards and best practices.

· Understand the constraints within which your design must work.

· Understand geometric tolerances and dimensional analyses.

· Choose components based on an understanding of function, reliability, and costs.

· Choose materials based on an understanding of materials science and engineering.

· Understand design for manufacturability/assembly.

· Work with the Electrical Engineer to choose drives and electrical components (if any).

· Discuss with the Software Engineer on any interlocking logic requirements.

· Lay the design concept down in the 3D CAD.

· Perform DFMEA during the design process.

· Submit the CAD module to the system integrator to check for interface issues.

· Review the design with the design lead.

· Put the part designs down on drawings, carefully specifying tolerances and specifications.

· Build the module BOM.

· Procure the module components.

· Review the assembly of the physical module.

· Perform design improvements where appropriate.

EDUCATION AND EXPERIENCE

· BE/BS Mechanical Engineering.

· 0-3 years experience in designing and developing automated equipment.

· 3D solid modeling, preferably Creo (others like Solidworks, NX are also acceptable).

· Electro-mechanical module conceptualization and design.

· Pneumatic/fluid circuit design.

· Detail fabrication drawings, assembly drawings and layout drawings.

· Selection and sizing of standard components available off the shelf.

Preferred experience

· Ultra high-precision machine design.

· High-speed pick and place mechanism design.

· Structural, kinematics and dynamic analyses and FEA simulations.

· Geometrical tolerancing and dimensional analyses.

· Engineering material selection.

· Manufacturing process selection.

· Application of analysis tools like FMEA, DOE.

Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

A & One Precision Engineering was founded in 1992 and established itself as one of the leaders in the global precision engineering industry. A & One has leading technological capabilities in advanced manufacturing and currently serves customers in the Semiconductor, Aerospace, Medical Technology, Energy, Consumer Electronics and Telecommunications Industries.
As a Design Engineer, your responsibilities are:

• Support NPI (New Product Introduction) on product design and development.
• Oversee the design and documentation of components made from precision machined parts and sheet metal.
• Employ Design for Six Sigma (DFSS) tools to enhance design manufacturability.
• Conduct impact analysis to refine designs, ensuring they meet specifications, project timelines, and cost objectives.
• Participate in technical discussions and present design solutions to clients.
• Coordinate the fabrication, assembly, and validation of prototypes to ensure they meet specifications.
• Prepare drawing proposal and tooling design.
• Conduct tooling buy-o7 and hands-on tooling setup.
• Initiate and conduct the improvement project evaluation.
• Liaise with customer on design requirement and alignment.
• Liaise with factory on capability compliance.
• Responsible on tooling expenses and cost control.

Requirements:

• Min. Diploma in Mechanical Engineering/ Mechatronics Engineering/ Precision Engineering.
• Proficient in using Solidworks and/or other 3D modelling software
• Proficient in using CAD/CAM Programming
• Preferably with working knowledge and experience in tool & die, jig & fixtures design.
• Familiarity with Geometric Dimensioning and Tolerancing (GD&T) and Tolerance Stack-up Analysis.

Enlitho Pte Ltd (“Enlitho”) is a deep-tech precision engineering company that specialises in Micro-Nano Engineering services, with a focus on the Biomedical, Optics, and Photonics industrial sectors. As a Mechanical Design Engineer at Enlitho, you will fulfill a crucial role in the development and integration of systems for manufacturing micro-nano devices.

Core Responsibilities

The ideal candidate will be responsible for the following:

• Designing and developing system specifications and requirements and performing engineering design calculations
• Analysis and preparation of detailed drawings for machine layout, components and sub-assemblies
• Drafting of necessary documentation detailing system design, test procedures, results, bill of materials, project planning, etc.
• Engaging with vendors for fabrication of parts and procurement of components and hardware relevant to the system
• Contribute to system testing, assembly, calibration and maintenance.

Background

The candidate should have a minimum of 1 year of experience (3 years for diploma holders) in mechanical or automated system design and a degree/diploma in Mechanical Engineering or a similarly relevant discipline.

Ideal Skillsets

The ideal candidate possesses the following skillsets:

• Proficiency and experience in 2D & 3D CAD (Solidworks, AutoCAD, etc.)
• Strong analytical skills and good knowledge of structures and materials
• Experience and familiarity with machine control hardware such as motors, sensors, robots, motion and I/O controllers, as well as machine vision hardware such as cameras, lighting, lenses, etc.
• Strong background in the design and construction of mechanical systems, preferably in automated systems design
• Core IT literacy and proficiency with MS Office Applications

The following will be considered a bonus:

• Relevant experience with micro-fabrication, microfluidics or other similar micro-nano devices
• Relevant experience with semiconductor processes (lithography, etc.)
• Relevant experience with manufacturing and process line development

Secretlab is an international gaming chair brand seating over 3 million users worldwide, with our key markets in the United States, Europe and Singapore, where we are headquartered.

You will be a valued member in our award-winning Product team, responsible for creating products for consumers across over 60 countries. In this dynamic role, you will innovate mechanical designs while balancing feasibility for manufacturing, seeing our products from R&D to mass production.

Our Product team is involved with all Secretlab’s industry-leading designs, including collaborative efforts with world-renowned brands such as Game of Thrones, Batman, Cloud9, Team Secret, as well as international esports organisers such as Riot Games for their League of Legends global tournaments

Responsibilities

• Oversee all aspects of mechanical research and development from concepts through to mass production.
• Design innovative and robust mechanisms to achieve the desired outcome of product requirements.
• Translating product specifications into designs optimized for DFM and DF
• Creating 3D designs in CAD and 2D drawings according to the Secretlab standard
• Perform hands on Prototyping to create proof of concept for functional and aesthetic validation.
• Performing risk mitigation actions like DFMEA, Design of Experiment, Finite Element Analysis, GD&T and tolerance stacking.
• Prepare administrative works and documentation for any design deliverables needed in the projects.
• A Go-To-Person to troubleshoot any design issue across projects.

Requirements

• Bachelor’s of Mechanical Engineering or equivalent
• At least 5 years of experience in engineering and design works for consumer hardware products in a fast paced environment.
• High level of proficiency in creating 3D CAD and 2D drawin
• Ability to use design tools such as DFMEA, DoE, FEA, GD&T and tolerance stack in their daily work to verify their design.
• Experience working with various materials like plastic, metal, rubber, and foam, as well as understanding their manufacturing methods/limitations.
• Ability to clearly present ideas to stakeholders using various methods.
• Ability to communicate with vendors in design discussions.
• Having an open-mind toward design approach and feedback
• Fluent in English and Mandarin (in order to liaise with Mandarin speaking suppliers)
• Ability to travel as necessary

Bonuses

• Experience integrating electronics and mechanical components.
• Experience as a design leader, serving as the go-to person for resolving design challenges.
• Experience working in a start-up environment

► Semiconductor and Electronics industry.

► Work Location: Ang Mo Kio

► Working hours: 8.30am to 5.30pm, Monday to Fridays

► AWS + VB

Our Client is a well-established company in Singapore to serve the semiconductor and electronics industries both local and globally.

Responsibilities:

• Conduct equipment design and development in accordance with customer requirements and internal specifications.
• Serve as the project lead, planning, organizing, and coordinating project meetings to review designs and ensure timelines are met.
• Maintain and manage documentation related to R&D activities, adhering to required standards.
• Track and ensure the Bill of Materials (BOM) is accurate and up to date.
• Create detailed 2D and 3D technical drawings.
• Initiate Engineering Change Notices (ECN) for design and drawing updates, and oversee the approval process and ECN workflow.
• Provide technical support for process and production teams, supply chain, and QA, including reviewing and troubleshooting designs and drawings.

Requirements:

• A Bachelor’s or Master’s degree in Mechanical Engineering or a related discipline.
• A minimum of 4 years of relevant experience in semiconductor or automation equipment design.
• Proficiency in Microsoft Office applications, including Word, Excel, and PowerPoint.
• A strong understanding of mechanical engineering principles and techniques.
• Extensive experience in mechanical design using SolidWorks is preferred. Experience with Autodesk/AutoCAD software will be an added advantage.
• Comprehensive knowledge and experience in material properties.
• Willingness to travel for overseas projects as required.x

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

Kindly send your resume in MS Word format to:

[email protected]

We regret only shortlisted candidates will be notified.
By submitting any application or resume to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chew Hong Huang

EA Personnel Reg. No.: R24124128

Responsibilities:

Design mould, tooling and test socket solutions based on customer specifications, semiconductor packages, and testing requirements.

Utilize CAD tools (such as CREO, AutoCAD, SolidWorks, or similar) to create detailed 3D models and technical drawings.

Ensure designs meet mechanical, thermal, and electrical performance requirements for high-precision semiconductor testing.

Select appropriate materials, tolerances, and manufacturing methods to ensure product durability, precision, and cost-effectiveness.

Able to carry out the R&D of new test socket whenever the market trend is needed.

Work closely with cross-functional teams, including Sales, Product Development, Process Engineering, and Manufacturing, to refine designs and ensure compatibility with testing equipment and processes.

Provide technical support to manufacturing teams during prototyping, production, and assembly to resolve any design-related issues.

Engage with customers and vendors to ensure all moulds, tooling and test socket solutions meet functional requirements and industry standards.

Oversee the prototyping phase, ensuring that initial designs are built and tested effectively.

Lead or participate in validation and testing efforts to ensure the tooling and test sockets perform under specified conditions (e.g., temperature, mechanical stress, electrical signals, thermodynamics).

Analyse test data and provide feedback for continuous improvement in design and materials.

Continuously seek to improve design efficiency and product performance, optimizing socket contact interfaces, reducing testing time, and improving signal integrity.

Innovate by introducing new design techniques, materials, or technologies that improve the quality, reliability, and cost of the test sockets and tooling solutions.

Stay up-to-date with the latest semiconductor technologies and testing methodologies to ensure cutting-edge designs.

Develop and maintain comprehensive documentation for all designs, including detailed engineering drawings, materials specifications, and manufacturing processes.

Create user manuals and technical documentation to guide customers and internal teams on the proper usage of tooling and test sockets.

Qualifications:

At least Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field.

5+ years of experience in mould & tooling design AND test socket design within the semiconductor industry or a related field.

Proven experience in designing test sockets, jigs, fixtures, and other related components for semiconductor testing.

Proficiency in & Hands-on experience with CAD software for mechanical design and simulation (e.g., CREO, SolidWorks, or AutoCAD).

Understanding of semiconductor testing processes and requirements (ATE – Automated Test Equipment).

Strong mechanical design and analytical skills.

Knowledge of materials science, particularly in relation to thermal management, wear resistance, and conductivity in socket designs.

Familiarity with signal integrity, high-speed test interfaces, and electrical characteristics relevant to test socket performance.

Excellent problem-solving skills, with the ability to identify and address complex technical challenges.

Strong attention to detail and precision in design and documentation.

Ability to work independently and as part of a cross-functional team.

Familiarity with industry standards for semiconductor testing (JEDEC, EIA, etc.).

Effective communication skills for both internal team coordination and customer interactions.

Willingness to travel occasionally for customer visits, manufacturing site inspections, or vendor meetings.

Duties & Responsibilities

• Design, develop and verify new products to meet product and process development requirements.
• Ownership of analog circuits used in SerDes, including evaluation of different circuit topologies for specific product requirements (e.g., Rx, CDR, Tx, bias generator, clock generation and distribution, etc.).
• Get along with multi-functional teams to define requirements/specs (e.g., modeling, package, board, DFT, ESD, etc.)
• Provide technical support to manufacturing during pilot, runs/tests.
• Craft block-level specifications based on link-budget, behavioral modeling, and transistor-level feasibility.
• Work closely with mask design to implement layout view of designs.
• Hold design reviews of blocks with peers/management to show design meets spec targets and requirements.
• Participate in projects and other adhoc duties assigned

Skills/Experience:

• Master or PhD in Electrical Engineering.
• Deep knowledge in high-speed SerDes protocols (e.g., PCIe, USB, SATA, etc.).
• Strong knowledge of analog CMOS designs and topologies.
• Deep experience with Tx & Rx equalization techniques and circuits.
• Deep experience in analyzing link jitter budget for high-speed serial links and creating block level requirements.
• Strong knowledge of different CDR architectures.
• Experience in lab testing of high-speed serial links and defining equipment needs

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

Physical Design Engineer

Experience : 5+ Years

Salary Range :SGD 7000-10000

Skills & Technical Expertise Required:

Netlist to GDSII at block level, Subsystem Level and at Full chip.

Worked on multiple tapeouts on Netlist to GDSII

Hierarchical partitioning and budgeting of block-level subsystems.

Implementation of high performance (HP) cores, low power designs

Node experience upto 3nm,7nm, 10nm, 14nm, 28nm.

Timing Signoff in loop through STA and ECO cycle at block and at interface.

Block level floor planning, power planning and IR drop analysis.

Scan chain reordering / Scan Chain repartitioning

CTS expertise and clock tree constraints creation for meeting specifications

MMMC optimization at Block and Sub-System Level

Timing closure with Crosstalk and AOCV / POCV

TCL scripting to fundamentally understand tool usage.

Mandatory EDA Skills

PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural). Preferably have done data centre, marine offshore, and mixed-development projects.
• Have completed at least 1 project (data centre, commercial bldg., industrial)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

We have an exciting position in the explosive growth area of Data Center Enterprise Storage. In this role you will be responsible for
developing the most advanced semiconductor devices to support stringent high capacity storage needs across all the top tier service
providers. Our IC R&D team is looking for an experienced physical design engineer to develop high speed custom analog/mixed signal
products for the storage industry. A qualified applicant would work closely with circuit design engineers to lay out high-speed custom analog
designs and develop mask layouts for customer products, as well as printed circuit board designs. You will join a cross-functional team
responsible for developing leading edge high-speed custom IC products that ultimately achieve high volume production.

Job Responsibilities
- Lay out high speed, high performance analog/mixed-signal custom integrated circuits
- Work directly with a team of engineers to determine floor plan, routing and I/O requirements
- Perform IC design rule and connectivity verification and drive products through mask release flows.
- Contribute to methodology improvements to increase layout and verification efficiency.
- Create reticle layouts, documentation, and PO’s to release products for mask build.
- Complete PCB layouts for test hardware.

Requirements/Qualifications should be:
- Bachelor's degree in Electrical Engineering (or related field)
- 5 years experience in custom analog IC physical design
- Experience with schematic-driven layout, floor planning, chip level routing, design for manufacturing and design rule and connectivity
verification is preferred
- Experience using Cadence Virtuoso XL preferred
- Experience with Cadence Allegro for PCB layout preferred
- Familiarity with both analog and digital layout tools and flows, circuit design concepts and IC manufacturing processes desired
- Strong communication skills
- Understanding of silicon process technologies (CMOS and Bipolar) and device physics would be a plus.
- Proven analytical skills (application of math and physics to solve problems)
- Must be meticulous and demonstrate attention to detail.

Responsibilities :

• Conduct equipment design & development work according to customers and internal specifications.
• Act as project lead to plan, organize and co-ordinate their respective project’s meetings to review design and ensure projects are kept to schedule.
• Maintain and control relevant documents related to R & D activities per requirements.
• Maintain, keep track, and ensure Billed Materials is updated.
• Generate detailed 2D/3D drawings.
• Raise ECN for update of changes to design and drawings and follow up on approval and ECN flow.
• Provide technical support to process & production, supply chain & QA for review and troubleshooting of design and drawings.

Requirements:

• Bachelor’s degree or master’s degree in mechanical engineering or relevant disciplines.
• At least 4 years of relevant experience in semiconductor or automation equipment design.
• Proficient in Microsoft Office applications (Words, Excel, PowerPoint)
• Strong understanding of mechanical engineering principles and engineering techniques are required.
• Plentiful experience of mechanical designs using SolidWorks is preferred. Candidate with Autodesk/Auto CAD Software will be an advantage.
• Solid knowledge and experience in material properties are required.
• Good communication, time management, problem-solving and decision-making skills.
• Willing to travel for overseas projects if required.

How to Apply:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to diana.pang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Pang Seng Leng Diana

EA Personnel Reg No: R1106651

Job Description:

• Responsible for analog/hybrid circuit program planning and design implementation, performance optimization, simulation verification and testing related work;
• Responsible for the design of high-performance, ultra-low voltage customized circuits under advanced technology. Targeting specific PPA requirements, able to select transistors, layout
• Effect analysis, unit logic merging and simplification, and starting from the underlying optimization thinking, deliver digital units or modules that can be integrated;
• Responsible for the physical design, analog/digital chip layout design of advanced technology digital ASIC/AI/CPU chips, and the exploration of new technologies such as PPAC optimization, fully customized design, and advanced packaging under advanced technology;
• Write various design documents and standardized materials, and implement the company's development processes, specifications and systems.
• Work tasks include but are not limited to:
• Commonly used analog chip or IP design, transistor-level circuit design and simulation, layout planning and design, timing library characterization extraction, SRAM custom design, etc.
• From gate-level netlist to back-end physical implementation of GDSII, digital/analog chip layout design, including PR, PV, IR Signoff, PPAC optimization, Sta/Spice Signoff, etc.;
• Chip design process development, In-House EDA tool development, chip yield tracking and optimization;

Requirements:

• Majors include but are not limited to mathematics/physics/electronic science and technology/microelectronics/information and communication engineering/computer science and technology/materials science and engineering fresh college students or overseas students within one year of graduation , master's degree or above;
• Excellent academic performance, strong curiosity, learning ability and knowledge transfer ability for new things and knowledge in professional and related fields;
• Understand the IC development process, and have a certain theoretical foundation and necessary capabilities of digital circuits as well as innovation capabilities.

Our client is a leader in semiconductor manufacturing equipments, providing designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking requirements. They are hiring for Senior Mechanical Design Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Senior Mechanical Design Engineer

Responsibilities:

Design and develop series of marking/inspection/ sorting/customised semiconductor equipment to meet the processing and automation needs of customers. Main duties involve

• Design standardization
• Costing and project management
• Machine and module conceptualization design
• Design for manufacturing (DFM), design for assembly (DFA) and Concurrent engineering
• Pneumatic/ hydraulic circuit design
• Detail fabrication drawings, assembly drawings and layout drawings
• Selection and sizing of standard components available off the shelf
• Undertake new product development or be involved in sustaining engineering/CIPs

Requirements:

• Bachelor/ Master of Engineering with minimum 5 years relevant experience
• 3D solid Modeling, preferably Pro-E (others like Solid Edge, Auto Inventor, Mechanical Desktop, Solid Designer are also acceptable).
• Strong project management skills
• Good track record in:

1. Ultra High Precision machine design
2. High Speed Pick and Place mechanism design
3. Structural, kinematics and dynamic analysis and FEA simulation
4. Geometrical tolerance and dimensional analysis (e.g. stack up error)
5. Engineering material selection
6. Design troubleshooting
7. Application of analysis tools like FMEA, DOE

Our client is a leader in semiconductor manufacturing equipments, providing designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking requirements. They are hiring for Senior Software Design Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Senior Software Design Engineer

Responsibilities:

• Design and develop software for automated semi-conductor process equipment.
• Improve equipment performance through CIPs and other development initiatives.
• Support field work to upgrade and resolve customer issues.

Requirements:

• Minimum Degree in Electrical & Electronics Engineering/Computer Studies or it’s equivalent.
• At least 5 years’ experience in programming on Windows (XP and above) environment.
• Good experience in C++, VC++, MFC, SQL and OOP.
• Good knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.
• Knowledge in PLC will be an added advantage.
• Strong analytical and problem-solving skills.
• Excellent team player.

As a fast-paced, growing business; this role will be responsible for significantly contributing to projects to deliver excellent service levels to clients and assist in the ongoing development and growth of the business, whilst providing sound technical, design and contract management support.

They should comply with B&W Engineering’s standards, procedures, process and implementations to ensure project requirements and clients’ specifications are fully met. Have the ability to demonstrate extensive experience in a wide range of technical areas and have a sound level of knowledge at Senior Engineer level.

Desirable experience would include the management of Data Centre projects..

Role Responsibilities and Requirements

Degree or higher in appropriate engineering discipline or have sufficient equivalent experience.

IES Electrical and Electronics Engineering Professional Membership desirable.

Singapore Professional Engineer registration or progress towards beneficial.

Proven experience in working within and running projects within a multi-disciplinary team with the successful delivery of the design for critical projects.

Experience in project management and MEP engineering track record with some experience of data centres or other critical engineering facilities.

Knowledge of MS Office applications Outlook, word, excel, PowerPoint etc

Knowledge of Dialux, Trimble (Amtech) Etap /AutoCAD/Revit/ BIM/CAD calculation software.

Ability to use IT based calculation and spreadsheet software.

Significant experience in production of drawings, calculations, schedules & specifications for a range of building types

At least 5 years overall experience with 3 years Data Centre design

Broad design experience across Commercial, High Rise, Hotels & Leisure would be beneficial

Demonstrate a thorough understanding of the design process.

Peripheral experience in architecture, structures, civils, security and permitting.

Excellent understanding of the various code requirements and standards across the APAC region.

Sound knowledge of key Health and Safety issues and legislation including Singapore Design for Safety (Dfs)

Ability to keep clear and accurate records and reports.

Understand and maintain the long-term goals of the business.

Understand the company QA process, maintain and contribute to the same standards across the APAC region

Ability to work autonomously, as part of a wider team.

Ability to embrace an intensively collaborative design environment working for and reporting daily to an expert client.

Ability to proactively step outside the role of conventional design regiment and stages to achieve the client’s deliverables.

Flexible and willing to travel to service international projects and customers.

Possess exceptional clear communication skills and command of spoken/written English.

Have an appreciation of different cultures/races and embrace the same.

Be a motivated, highly dependable

Maintain an appropriate knowledge of industry initiatives.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

• Build blazing fast page speeds
• Build reusable components/primitives
• Delightful user interactions and affordances
• Work with the team to review PR, and make the codebase robust.

Job Requirements

• 5 years experience at tech startups with millions of DAUs
• Solid knowledge of TypeScript, and experience with Next.js, etc.
• Basic backend skills with Node.js, building REST APIs, working with databases
• Knowledge in Bitcoin and mining concepts
• Strong written and verbal communication skills

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

• Responsible for detailing and drafting precast concrete components for construction projects to ensure the successful production and installation of precast elements that meet project specifications, structural requirements and quality standards.
• Develop precast layout and fabrication shop drawings of precast elements for submission and production.
• Prepare reinforcement detailing and bar bending schedule.
• Ensure shop drawings are clear, accurate, and in accordance with project requirements, standard and project timelines.
• Incorporate openings, recesses, architectural features, cast in items, lifting system and other relevant information in shop drawings (2D & 3D).
• Raise RFI to finalize precast shop drawings.
• Coordinate with site team concerning on drawing details and technical issues to ease production as well as installation on site.
• Work closely with production and suppliers on the submission/issuance of shop drawings, highlight technical issues and keep them updated of any revisions.
• Attend technical meetings with consultants/clients as and when required.
• Perform any ad-hoc duties assigned.

Possess extensive knowledge of power plant systems and operations, along with strong leadership skills to lead a small team of engineers and technicians. This role is crucial for ensuring that all plant engineering tasks are executed correctly. The successful candidate will oversee plant engineering designs to guarantee that the plant operates efficiently and safely.

Key Responsibilities:

• Responsible for plant engineering design activities for power plant project including cable sizing calculation, cable routing, connection drawing, loop drawings, termination diagrams
• Work with 3D design team for 2D deliverables
• Lead, mentor, and manage a small team of engineers and technical staff
• Collaborate with different parties for plant engineering coordination and support site inspection
• Provide technical support for project manager for project engineering milestone deliveries
• Support purchasing team for technical evaluation and price optimization

Desired Characteristics:

• Knowledge of onshore power plant design engineering, prefer to have work exp in Singapore.
• Experience in coordination, leading and managing plant engineering teams.
• Familiar with complicated cable tray route, cable tray support engineering design, equipment layout, installation materials, cable glands selection, cable drum schedule, cable route schedule, cable termination material, and so on.
• Proficiency in relevant engineering software and tools, such as Revit, Navisworks, Autocad
• Min 6 years experience in Electrical composite plant project

Duration: 6 months (may be extendable)
Work Location: Ayer Rajah
Working hours: 8hours a day, 5 days a week

This is 12 - months Contract (extendable + convertible)

Location: The Alpha, Science Park

Normal working hours

Essential Responsibilities:

• Carry out detail engineering task for water and wastewater treatment plant to full fill business obligation e.g. On-time delivery, Satisfy contract specification or industrial standard and bring value to customer. Work shall include but not limited to the following:
• Prepare sketches on P&IDs Drawing
• Prepare sketches on Fabrication Drawing
• Prepare sketches on Equipment Layout Drawing
• Prepare sketches on Pipe Routing Drawing
• Prepare equipment and material datasheet
• Perform equipment sizing calculation
• Perform pipe sizing calculation
• Perform hydraulic calculation
• Perform pipe stress analysis
• Perform material take off
• Raise purchase requisition
• Check and sign off engineering design
• Work together with in-house design team aboard to meet engineering deliverable.
• Contribute to value engineering to drive cost down.
• Evaluate vendor quote and provide input on vendor selection.
• Support business initiative to bid and win job as required.
• Support Project Management/ Construction Team on construction activities as required.
• Support Commissioning Team on commissioning activities as required.

Qualifications/Requirements:

• Bachelor Degree in Chemical/Mechanical/ Electrical Engineering
• Minimum 3- 5 years working experiences in design of water and wastewater
• Highly motivated and able to work under pressure
• Experience in construction, test and commission, and operation of water and wastewater plant is a plus point
• Well versed in MS Excel, MS Word, and MS PowerPoint
• Familiar in MS SharePoint, MS Team, and Naviswork
• Ability to operate AutoCAD and SAP is a plus point

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform you that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use, and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E

• EA License No. 01C4394

• Registration No. R23112260 (MayThinKyu)

Are you a talented Civil and Structural Engineer looking to take your career to new heights? We have an exciting opportunity that offers a generous remuneration package, unparalleled professional development prospects, and a clear path for upward progression.

The Role

The role reports directly to the team lead. He or She is responsible for supporting the Professional Engineers on the design and supervision of new erections, addition and alteration (A&A) work to existing buildings, earth retaining and stabilising systems, specialist designs for the facade, glass, demolition works etc, as well as temporary works. The role may also be required to conduct site inspections.

Responsibilities:

• Carry out detailed analysis and design of civil, structural, and geotechnical works;
• Prepare design calculation reports and structural drawings for authorities' submissions;
• Coordinate with various stakeholders such as clients, consultants, and contractors for projects; and
• Supervise and inspect construction works;

Requirements:

• Degree in Civil/Structural Engineering from a recognized Institution;
• Strong engineering fundamentals and analytical skills in geotechnical and structural analysis and design work would be an advantage;
• A good knowledge of the application of design and drafting software such as Autocad, Staad Pro, Plaxis, Prota, and Tedds would be an advantage;
• Candidates without working experience are welcome to apply.
• For more senior positions, at least 3 years of design experience for executive engineers and at least 5 years of design experience for senior engineers.
• Passing FEE 1 and FEE 2 are an advantage.

Vision:

To be a Civil & Structural (C&S) Consultancy firm recognised for innovative engineering solutions that are created in the course of work.

Mission:

To engineer construction solutions that create new values for all building stakeholders.

Benefits:

• Flexibenefits, Medical, rand Dental
• 13th AWS and Performance Bonus
• Group Insurance
• Training Grant and Education support,
• Miscellaneous allowance,
• Blue Sky Friday
• Bonding Events

Working Hours:

Regular hours, Mondays - Fridays

Dress Code:

Business (e.g. Shirts), Dress Down Day -Friday