Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Purpose of Role:

This person is responsible for ship electrical detail design activities and able to process basic design information to expand the function design into production information for the marine vessel.

This role shall perform engineering of electrical and navigation equipment to the related platform equipment, as well to interface with Ship Management System (SMS). The scope includes :

o Main Power generation and distribution system network and architecture

o Integrated electric propulsion systems, Power management systems

o Engineering integration between ship equipment / Ship Monitoring system with Electrical power generation

o Electrical fittings, equipment and panel arrangement

o Preparation of equipment connection and cable schedules

o Electrical design calculation

Responsibilities:

• Responsible for vessel electrical system detail design in accordance with Marine Classification and regulatory, as well as IMO/Solas

• Review vendors technical proposal to ensure solution meets the functional requirement

• Responsible for ensuring the Contractual technical requirement and Classification requirement of automation related design are fulfilled and within project schedule.

• Liaise with client and other internal engineering trades for project coordination.

• Attend technical review and meetings with client and vendors during project execution to ensure requirement are fulfilled, technical solutions are discussed and technical issues resolved.

Knowledge and Skills:

• Knowledge of Marine Electrical and Automation systems

• Knowledge in Autocad, Naviswork, ETAP and CADCAM 3D software will be advantageous

Requirements:

• 3 years of related experience in Ship design related engineering industries such as Marine & Offshore
• Degree in Electrical, Automation, Mechatronic or any related engineering field
• Good Interpersonal Skills, Problem-Solving skills and is a team player.
• Good time management and able to meet tight deadlines.

Other Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Mentor a team of engineers in Basic design to carry out Hull form and General arrangement development, Hydrodynamic and stability calculations for a tender or ongoing projects.
• Assist in the development of new products.
• Support other in-house departments and external parties, where required, by providing specialist technical advice and information.
• To generate list of drawing/document specific to each project.
• Prepare technical specifications for equipment procurement (e.g. major deck equipment) and perform technical evaluation of vendor’s bid.
• Carry out naval architectural calculations, hydro dynamic analysis, stability calculations.
• Prepare and review layout arrangement in accordance with building specification, rules, and regulations (fire, watertight integrity, accommodation layouts…)
• Manage and check technical information of external suppliers of equipment and systems and coordinate/cooperate with engineers from other trades in the organization.
• To check and approve calculation/drawings and material list and ensure that they conform to contractual technical specifications, installation control documents, Classification and Statutory Rules/Regulations.
• Participate in tests and trials, where required.
• Liaise with ship owners and surveyors.
• Ensure that all design issues raised by owner, Class and Flag on drawings and documents are timely and properly captured in Action Item Register for follow-up actions.
• Keep abreast with current technological developments and products.
• Keep abreast with Classifications Rules, military and industrial standards relevant to design activities.

Requirements:

• Degree in Naval Architecture/ Marine Engineering or Structural Engineering from a recognized University
• Strong knowledge of international design codes, Classification/Statutory Rules, and Regulations.
• Possess Engineering Design and Project Management skills
• Strong Leadership and Interpersonal skills to manage assigned team members and other stakeholders
• Strong experience in Naval architecture, Structure, Outfitting, Accommodation design
• Proficiency in AutoCAD, Aveva Marine, NAPA, Microsoft office, Rhino 3D, CFD software knowledge
• High proficiency in 3D modeling skills using 3D CAD software will be an advantage.
• At least 10 years’ experience in engineering design in Marine/Offshore/Oil & Gas industry or Classifications Societies

Other Information:

• Location: 16 Benoi Road(Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

About Us:

Smartpaw is at the forefront of pet technology, offering innovative solutions that enhance the lives of pets and their owners. We're expanding our marketing team to drive our growth and are looking for a dynamic Digital Marketing Specialist.

Job Summary:

This role will spearhead our digital marketing efforts, focusing on increasing our online visibility and sales through various channels. The ideal candidate will have a strong understanding of e-commerce marketing, with proven experience in driving traffic and conversions across multiple online marketplaces.

Key Responsibilities:

E-commerce Marketing:

Optimize product listings across multiple online marketplaces, including Shopify, Shopee, Lazada, and others, to improve visibility, conversion rates, and sales.

Develop and implement strategies to drive traffic to our online stores through a variety of channels (e.g., social media, email marketing, paid advertising).

Manage and optimize online advertising campaigns (e.g., Google Ads, Facebook Ads, marketplace-specific ads) to maximize ROI.

Utilize SEO best practices to improve organic search rankings.

Facebook Ads:

Plan, create, and manage Facebook ad campaigns to reach target audiences, generate leads, and drive sales.

Optimize ad creatives, targeting, and bidding strategies to achieve campaign objectives.

Monitor and analyze campaign performance, making data-driven adjustments to improve results.

Email Marketing:

Develop and execute email marketing campaigns to nurture leads, promote products, and drive sales.

Build and segment email lists, and personalize email content to increase engagement.

Analyze email campaign performance and make data-driven adjustments to optimize results.

Content Marketing:

Plan and oversee the creation of engaging content that supports marketing goals, including blog posts, product descriptions, and social media updates.

Analytics & Reporting:

Use data to drive marketing decisions, track performance, and refine strategies across all channels.

Regularly report on key metrics, providing insights and recommendations to improve overall marketing effectiveness.

Affiliate Marketing:

Support in managing affiliate partnerships to boost sales.

What You'll Need:

Proven experience: At least 1 year of experience in a digital marketing role, with a strong understanding of digital marketing principles and best practices.

A passion for pets: A genuine love for animals and an understanding of the pet industry.

Excellent communication skills: Strong written and verbal communication skills, with the ability to create engaging and informative content.

Data-driven mindset: Experience using analytics tools to track performance and optimize campaigns.

Creativity and initiative: The ability to think outside the box and come up with new and innovative ideas.

Team player: A collaborative spirit and the ability to work effectively with others.

Job Type: Full-time

Pay: $2,300.00 - $3,000.00 per month

Benefits:

Dental insurance

Employee discount

Health insurance

Schedule:

Monday to Friday

Experience:

E-Commerce: 1 year (Preferred)

Work Location: In person

BASK was started (in June 2020) with a single objective: to offer luxurious silk products at a revolutionary price.

We make ethically sourced silk bedding products, eye masks, and fashion hair accessories.

If you would like to play a part in introducing mulberry silk products to the younger generation so that they can witness its benefits for their hair and skin too, we want to hear from you.

For this role, we are seeking a highly motivated and creative intern in the field of graphic design, social media to assist in product design and daily content creation.

Content Creation:

• Curate creative ideas and generate engaging video content for different social media platforms.
• Create daily content including photos, videos, edits, and copywriting on our Tiktok, Instagram and other social media accounts
• Utilise your video editing skills to produce high-quality content that resonates with our target audience and drives engagement.
• Plan, curate, and execute the media calendar, ensuring timely and consistent content delivery across all platforms.

Graphic Design:

• Curate, research and develop concepts and layouts for our new products, packaging and marketing materials, websites, social media postings and other media collaterals.
• Assist in day-to-day administrative tasks and support for product listings creation, e-commerce storefront layout design update etc.

Ideal candidate should have:

• A good eye for design
• Attention to details
• Strong sense of responsibility and initiative
• Able to multi-task and work independently, as well as in a team
• Comfort working with Adobe Creative Suite, particularly Photoshop, InDesign, and Illustrator
• Reside in Singapore

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

1. Assisting and supporting technical sales team in terms of scope of supplies and costing with respect to electrical, automation requirements during the prospecting stage for water/wastewater related systems and projects.
2. Liaising and communicating with agents/distributors/OEM partners/end-user customers on technical details and specifications of parts and components where EICA works are concerned.
3. Design and producing electrical, control panel drawings (AutoCAD or Eplan), BOM list generation and hardware component selection.
4. Developing PLC programming & HMI project (Siemens /Allen Bradley etc) for all process and functional controls of water/wastewater related systems and instrument.
5. Liaising, negotiating, and managing sub-suppliers/sub-contractors in Singapore and in the region with respect to procurements of all wiring and cabling works, fabrication and assembly of control panels for systems as well as for in-situ installation of water/wastewater related systems or projects.
6. Determining and monitoring procurement and production progress and schedules where cabling and wiring works, control panels’ PLC works and supplies are concerned.
7. On site electrical installation supervision, electrical panel testing, instrumentation configuration, loop test and automation commissioning works.
8. Compiling and handing over operation and maintenance (O&M) manuals (electrical and PLC portions etc) to our agents/distributors and end-user customers.

Requirements:

• Diploma / Degree in Electrical Engineering or Computer Science.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Minimum 5 to 8 years of working experience in Water Industry or engineering projects would be advantageous.
• Knowledge of PLC programming (Siemens /Allen Bradley etc)
• Willingness to travel locally or to regional countries occasionally for site installation, trouble-shooting or testing and commissioning duties at clients' project sites
• Able to work independently and a good team player.
• Senior position will be considered for candidates with more experience.
• Candidate who are able to start work within short notice or immediately would be advantageous.

School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research. With over 3,000 undergraduates students and 1,000 graduate students it is one of the largest EEE schools in the world and ranks 10th in the field of Electrical & Electronic Engineering in the 2024 QS World University Rankings by Subjects.

Today, the School has become one of the world’s largest engineering schools that nurtures competent engineers and researchers. Each year, the School graduates over a thousand students who are ready to take on great ambitions and challenges.

For more details, please view: https://www.ntu.edu.sg/eee

We are looking for a Research Fellow to support the research for the project titled: Resistive Memory Endurance Enhancement Utilizing Smart Mitigation and Recovery Techniques.

Key Responsibilities:

The Research Fellow will work on the assigned project to conduct the research on development of resistive circuits design. The candidate must have good experience in the areas listed below, possesses excellent skills. The roles of this position include:

• Development of robust resistive circuits design
• Test chip design and layout
• Good testing skills

Job Requirements:

• PhD degree in Electrical and Electronic Engineering or related field
• Expertise in resistive memory circuits design
• Excellent publication track record is an advantage
• Test chip design and testing experience are advantages
• Excellent verbal and written communication skills

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

ABOUT THE NATIONAL INSTITUTE OF EDUCATION (NIE)

The National Institute of Education (NIE), Singapore, is Singapore’s national teacher education institute and we are proud to be an integral part of the nation’s education service. We play a key role in the preparation of teachers and in the provision of teacher professional and school leadership development programmes. We are committed to our vision of being An Institute of Distinction: Leading the Future of Education and our mission to Inspire Learning, Transform Teaching and Advance Research.

NIE invites suitable candidates to join the Division of Academic Computing & Information Services (ACIS) as an Analyst Programmer/Systems Analyst (2-year contract).

The candidate should be a dynamic IT professional who is a good team player and a strong software developer.

Job Description

As a member of the Digital Solutions department responsible for data migration and systems integration initiatives, your responsibilities include:

1) Building integration solutions between various software systems to ensure seamless communication and data flow between systems to support business operations. Specifically, the activities include:

• Architect and orchestrate robust data pipelines and integration points between systems.
• Develop and implement integration interfaces, APIs and middleware to enable data exchange between different systems, e.g. core student systems, learning management platforms, payment gateway, etc.
• Work with various technical teams and product vendors to understand integration requirements and ensure compatibility.
• Monitor and maintain integration solutions, troubleshooting and resolving any reported issues.
• Establish secure and compliant integration across the technology stack.

2) Performing data migration from legacy systems to new COTS to preserve data integrity, quality, and consistency. Specifically, the activities include:

• Develop and execute data migration scripts and processes using appropriate tools and technologies.
• Collaborate with business owners to establish data mapping rules.
• Perform data mapping, cleansing, transformation, validation, and reconciliation to ensure data accuracy post-migration.
• Ensure compliance with data security and privacy policies throughout the migration process.
• Provide post-migration support and troubleshooting as required.

3) Project management and collaboration. Specifically, the activities include:

• Track project progress to ensure timely delivery and alignment with project requirements.
• Foster effective communication and collaboration with cross-functional teams involving technical and business stakeholders.

Requirements:

• A University degree in Computer Science, Information Technology, Engineering or a related field.
• At least 2 years of experience as a software developer or in a similar role, with specific exposure to data migration and systems integration with APIs.
• Proven expertise in data mapping, transformation, and scripting/programming languages for data migration initiatives.
• Strong knowledge of API design and development, web services (REST, SOAP) and middleware technologies.
• Knowledge of database management systems and data modelling.
• Familiarity working with COTS and SAAS integration and migration.
• Proficiency in SQL and scripting languages (e.g., Python, Shell scripting) and integration frameworks.
• Quick learner who is passionate and willing to learn new languages and technologies.
• Experience in the Software Development Life Cycle (SDLC) framework and Agile software development methodology.
• Knowledge of cloud platforms (e.g. AWS, Azure) and microservices architecture is a plus.
• Knowledge of IT security principles and data and system integration compliance.
• Excellent problem-solving skills and attention to detail.
• Excellent communication and interpersonal skills.
• Good self-motivated team player with a positive attitude and flexibility in adapting to changes.
• Ability to work with tight deadlines and fluid requirements.

Other Information
NIE staff can take chartered buses at their own expense from or near their homes to NIE campus. This is subject to the availability of seats.

Req ID: R00017187

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research.

With over 3,000 undergraduates students and 1,000 graduate students it is one of the largest EEE schools in the world and ranks 10th in the field of Electrical & Electronic Engineering in the 2024 QS World University Rankings by Subjects.

Today, the School has become one of the world’s largest engineering schools that nurtures competent engineers and researchers. Each year, the School graduates over a thousand students who are ready to take on great ambitions and challenges.

For more details, please view: https://www.ntu.edu.sg/eee

We are seeking a motivated and skilled Project Officer to contribute to the design and simulation of high-efficiency DC-DC converters and RF power amplifiers.

This role involves working on innovative solutions in the field of analog/RF/power management IC.

Key Responsibilities:

• Development of teaching materials for IC design
• Design, implementation and testing of DC DC converters and other related analog/mixed signal ICs. Development cycle including circuit design, simulation, modeling, layout, verification and measurements.
• Design state of the art DC DC converters that include op amps, comparators, bandgap, low-drop linear regulator, ADCs, switching power stage, etc
• Design of high power-efficiency RF power amplifiers
• Prepare research papers/reports/technology disclosures, etc

Job Requirements:

• Bachelor’s degree in IC design or related field.
• At least 2 years of relevant experiences in IC design/Electronics.
• Familiarity with Analog/Power Management/RF IC design and Cadence software.
• Good written and oral communication skills.
• Proficiency in Cadence, Python or Matlab.
• Ability to work independently and deliver solutions within strict timelines.
• Attention to detail, with excellent organizational and time management skills.
• Entry level candidates are welcome to apply.

We regret to inform that only shortlisted candidates will be notified.

Job Responsibilities:

• Identify project design hazards, construction risks, and constructability issues.
• Develop corresponding mitigation measures together with the project team.
• Chair regular risk mitigation meetings and training with clients and internal parties.
• Advise management on alternative safer and higher productivity construction methodologies.
• Review method statements and risk assessments for safety and construction compliance.
• Attend meetings related to construction progress, risks, etc.
• Any other duties as assigned by the Managements.

Job Requirements:

• Have reasonable exposure in safety and health for construction especially on transportation infrastructure projects in a similar nature
• Attended the Design for Safety (DfS) for Professional Course and passed the assessment or equivalent.
• A registered PE or Architect with a Practicing Certificate OR
• Minimum 10 years relevant experience in the design and the supervision of the construction of structures with at least 5 years in design which includes contributions to designs and writing specification
• Have a degree accepted by PE Board or Board of Architect and construction related degree accepted by Singapore Institute of Surveyors (SISV) and Society of Project Managers (SPM)
• Possess excellent leadership, planning, good management skills, interpersonal communication and negotiation skills
• Have experience in LTA projects have an advantage

Job Description

Sea Forrest Engineering Pte Ltd (a subsidiary of BH Global Corporation Ltd) seeking a skilled and experienced Electrical Design and Commissioning Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing and commissioning complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Responsibilities

1) Electrical Design

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) Commissioning and Integration

• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.

3) System Optimization and Performance Enhancement

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

4) Documentation and Reporting

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.

5) Regulatory Compliance and Safety

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Requirements

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design and commissioning, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel to shipyards and vessels for commissioning activities.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

We are looking for an efficient and committed Manager to join our office. As a Manager, you will be managing the day to day activities. You will be responsible for arranging meetings for the staff, provide them necessary official documents and keep a record of the appointments within the office. You will be also arranging monthly repairs and renovations.

You will also be organizing office operations and procedures. You should be highly dedicated to work and have exceptional organizational skills. If you are ready to take up Manager duties and responsibilities, then apply right away. We will love to meet you.

Responsibilities of a Manager

• Work with Human Resources staff to recruit, interview, select, hire, and employ an appropriate number of employees.
• Provide oversight and direction to the employees in the operating unit in accordance with the organization's policies and procedures.
• Health and safety of the workforce.
• Carrying out and attaining the mission and the goals of the business unit managed.
• Development of a superior workforce.
• Development of the department.
• Development of an employee-oriented company culture that emphasizes quality, continuous improvement, key employee retention and development, and high performance.
• Personal ongoing self-development and personal growth as an employee.
• Coach, mentor, and develop staff, including overseeing new employee on boarding and providing career development planning and opportunities.
• Empower employees to take responsibility for their jobs and goals. Delegate responsibility and expect accountability and regular feedback.
• Consciously create a workplace culture that is consistent with the overall organization's and that emphasizes the identified mission, vision, guiding principles, and values of the organization.
• Lead employees using a performance management and development process that provides an overall context and framework to encourage employee contribution and includes goal setting, feedback, and performance development planning.
• Lead employees to meet the organization's expectations for productivity, quality, continuous improvement, and goal accomplishment.
• Provide effective performance feedback through employee recognition, rewards, and disciplinary action, with the assistance of Human Resources, when necessary.
• Maintain employee work schedules including assignments, job rotation, training, vacations, and paid time off, telecommuting, cover for absenteeism, and overtime scheduling.
• Maintain transparent communication. Appropriately communicate organization information through department meetings, one-on-one meetings, and appropriate email, IM (Instant Messaging), and regular interpersonal communication..
• Plan and implement systems that perform the work and fulfill the mission and the goals of the department efficiently and effectively.
• Plan and allocate resources to effectively staff and accomplish the work to meet departmental productivity and quality goals.
• Plan, evaluate, and improve the efficiency of business processes and procedures to enhance speed, quality, efficiency, and output.
• Manage the preparation and maintenance of reports necessary to carry out the functions of the department. Prepares periodic reports for management, as necessary or requested, to track strategic goal accomplishment.
• Communicate regularly with other managers, the director, vice president, president, and other designated contacts within the organization.
• Perform other duties and responsibilities, as assigned.

Manager Job Requirements

• Knowledge and experience in business, supervision, and management.
• Knowledge of the functions, operation, and mission of the specific department.
• Better than average written and spoken communication skills.
• Outstanding interpersonal relationship building and employee coaching and development skills.
• Management experience in a team-oriented workplace preferred.
• Demonstrated ability to lead and develop a department and department staff members.
• Demonstrated knowledge of basic economics, budgeting, and accounting principles and practices.
• Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction.
• Excellent computer skills in a Microsoft Windows environment. Must include knowledge of Excel and skills in Access..
• Evidence of the ability to practice a high level of confidentiality.
• Excellent organizational management skills.

Key Responsibilities

1. Leadership and Team Management

• Lead, mentor, and manage a team of marine service executives and coordinators.
  Allocate resources effectively and ensure team members meet performance objectives.
  Provide training and development opportunities to enhance team capabilities.
  

1. Operational Oversight : Oversee daily marine operations, including vessel scheduling, port clearances, and service arrangements.
   Ensure seamless coordination with port authorities, agents, and vendors to meet operational demands.
   Implement and monitor standard operating procedures (SOPs) to optimize efficiency.
   
2. Client and Stakeholder Management : Serve as the primary contact for key clients, ensuring satisfaction and resolving any escalated issues.
   Build and maintain strong relationships with clients, port authorities, and service providers.
   Identify and pursue opportunities for business growth and service improvement.
   
3. Regulatory Compliance and Documentation : Ensure compliance with international and local maritime regulations, environmental standards, and company policies.
   Oversee the preparation and submission of all required shipping and operational documentation.
   Conduct regular audits to ensure documentation accuracy and adherence to standards.
   
4. Cost and Budget Management : Develop, manage, and monitor the department’s budget to ensure cost efficiency.
   Analyze operational costs and implement strategies to optimize spending without compromising service quality.
   Provide regular financial and operational performance reports to senior management.
   
5. Strategic Planning and Improvement : Drive continuous improvement initiatives to enhance service delivery, streamline processes, and achieve key performance indicators (KPIs).
   Monitor industry trends and emerging technologies to maintain a competitive edge.
   Collaborate with senior management to align marine operations with company goals and strategies.
   

Qualifications and Skills

• Bachelor’s degree in Maritime Studies, Logistics, Business Management, or a related field (Master’s degree preferred).
• Minimum of 5–8 years of experience in marine services or shipping operations, with at least 3 years in a managerial role.
• Strong knowledge of international maritime regulations, port operations, and logistics.
• Proven leadership skills, with experience managing and motivating diverse teams.
• Excellent problem-solving, decision-making, and organizational skills.
• Strong communication and interpersonal skills to build relationships with clients and stakeholders.
• Proficiency in MS Office and marine operations software.

Job Descriptions

• System Integration Planning - Develop comprehensive integration plans for ELV systems, including BMS, EPMS, and structured cabling, outlining project scope, timelines, and resource requirements.
• Coordinate with project stakeholders to gather requirements and ensure alignment with project objectives.
• Technical Expertise - Possess in-depth knowledge of ELV systems, including BMS, EPMS, and structured cabling systems, along with their functionalities, protocols, and integration methodologies.
• Evaluate system requirements and design integration solutions that meet performance standards and regulatory requirements.
• Integration Implementation - Lead the execution of integration projects, overseeing the deployment of hardware, software, and networking components.
• Review and verify points list for accuracy against project Basis of Design, Sequence of Operations and Specifications.
• Collaborate with internal teams, external vendors, and contractors to ensure timely and successful implementation of integration solutions.
• Testing and Validation - Conduct thorough testing and validation of integrated systems to ensure functionality, performance, and reliability.
• Identify and troubleshoot integration issues, working closely with technical teams to implement corrective actions.
• Management - Serve as the primary point of contact for stakeholders, providing regular updates on integration progress, addressing concerns, and soliciting feedback.
• Collaborate and Resolve integration-related issues and ensure alignment with project goals.
• Documentation and Reporting - Maintain accurate documentation of integration processes, configurations, and system specifications.
• Generate regular reports summarizing integration activities, test results, and key findings for stakeholders and management review.
• Training and Support – Coordinate with vendors for training and support documentation and presentations to end-users and stakeholders on the operation and maintenance of all integrated ELV systems.
• Safety Compliance - Ensure compliance with all relevant electrical safety regulations, standards, and procedures.

Job Requirements

• Degree in Electrical Engineering, Controls Engineering, or any related field or Tradesman (Certified)
• 5+ years of “Hands On” project experience in the field, not only office-based experience.
• 5+ years of experience in designing, implementing, and managing ELV systems, with a focus on BMS, EPMX, Plant Manager PLCs, and structured cabling systems.
• Strong technical expertise in ELV systems, including knowledge of protocols (e.g., BACnet, Modbus), networking principles, and structured cabling standards (e.g., TIA/EIA).
• Proven management skills, with the ability to plan, execute, and monitor integration projects effectively.
• Excellent communication and interpersonal skills, with the ability to collaborate effectively with diverse teams and stakeholders.
• Analytical mindset with the ability to assess system performance, identify issues, & implement solutions.
• Competent in the use of PC applications (Microsoft Office suit or equivalent).
• Salary Range: $7800 - $8000 (Based On Experience)

Glam Salon is a subsidiary company of our parent company which was established since 2002. We are a professional beauty salon that caters to individuals from all walks of life, from children to elderly.

We strive to help our clients reach their desired needs and giving them the confidence as they leave our shop with satisfaction.

Job Key Responsibilities：

· Managing the day to day Operations of the designated outlet assigned.

· Lead / Manage a team of Consultants and Therapists.

· Motivate and coach staff for better performance

· Maintain and update Customer database.

· Drive Sales into the outlet through Marketing Support.

· Promote treatments and packages to Customers.

· Maintain the outlet overall presentation and responsible for the outlet Sales and Revenue

· Lead the Outlet Team in achieving Outlet Sales Target and productivity

· Achieve Personal Sales Target

· Evaluate progress against Sales Target, identify and implement the solutions

· Responsible for daily outlet operations such as handling of customer complaints, motivate staff morale, provide guidance & coaching to staff, etc

· Train, mentor and coach outlet staff to develop and maximize their performance

Job Objectives:

• Lead and work with all outlets to ensure that all parts of the business run efficiently and effectively
• Execute different business strategies to support company growth
• Oversee employee performance and development
• Evaluate business performance, productivity and competitiveness
• Manage costs, budgets and revenue efficiently

Requirements:

· Personal monthly sales achievement

· Possess Results Driven Attitude

· Diploma in Business Administration / Hospitality and Tourism or equivalent certification.

· At least 10 years above relevant working experience, prefer managerial staff specialize in Retail Sales or Service Industry experience.

· Results and service oriented.

· Motivated, Sales driven and dynamic individuals.

· Strong leadership management and interpersonal skills.

· Good communication skills and Positive attitude.

· Willing to work retail hours.

· Full time position.

Roles & Responsibilities

Cost Estimation .Invoicing . Project Management . Budget Planning .Construction Schedule and Planning .Communicate with different Disciplines .Problem-solving .Generating Job Packs and Test Packages .Creating Work Method of Statements c/w Risk Assessment. Developing Strategies to improve Company performance,Provide supports to execute MOC (Management of Change) jobs, shutdown job, revamping and turnaround job and to ensure job is executed as Exxonmobil standard and specifications.

Developing Work method of statement, Job safety analysis, Risk Assessment.

Prepare and develop Job packs, Loop folders, test packages, red line mark ups and as-builting.

Prepare and procure materials. Prepare and submit material approval to client.

Review and verify Construction drawings, generates engineering query, field instructions.

Process and Construction and Management @ Jurong Island Field work.

We are looking for an efficient and committed Manager to join our office. As a Manager, you will be managing the day to day activities. You will be responsible for arranging meetings for the staff, provide them necessary official documents and keep a record of the appointments within the office. You will be also arranging monthly repairs and renovations.

You will also be organizing office operations and procedures. You should be highly dedicated to work and have exceptional organizational skills. If you are ready to take up Manager duties and responsibilities, then apply right away. We will love to meet you.

Responsibilities of a Manager

• Work with Human Resources staff to recruit, interview, select, hire, and employ an appropriate number of employees.
• Provide oversight and direction to the employees in the operating unit in accordance with the organization's policies and procedures.
• Health and safety of the workforce.
• Carrying out and attaining the mission and the goals of the business unit managed.
• Development of a superior workforce.
• Development of the department.
• Development of an employee-oriented company culture that emphasizes quality, continuous improvement, key employee retention and development, and high performance.
• Personal ongoing self-development and personal growth as an employee.
• Coach, mentor, and develop staff, including overseeing new employee on boarding and providing career development planning and opportunities.
• Empower employees to take responsibility for their jobs and goals. Delegate responsibility and expect accountability and regular feedback.
• Consciously create a workplace culture that is consistent with the overall organization's and that emphasizes the identified mission, vision, guiding principles, and values of the organization.
• Lead employees using a performance management and development process that provides an overall context and framework to encourage employee contribution and includes goal setting, feedback, and performance development planning.
• Lead employees to meet the organization's expectations for productivity, quality, continuous improvement, and goal accomplishment.
• Provide effective performance feedback through employee recognition, rewards, and disciplinary action, with the assistance of Human Resources, when necessary.
• Maintain employee work schedules including assignments, job rotation, training, vacations, and paid time off, telecommuting, cover for absenteeism, and overtime scheduling.
• Maintain transparent communication. Appropriately communicate organization information through department meetings, one-on-one meetings, and appropriate email, IM (Instant Messaging), and regular interpersonal communication..
• Plan and implement systems that perform the work and fulfill the mission and the goals of the department efficiently and effectively.
• Plan and allocate resources to effectively staff and accomplish the work to meet departmental productivity and quality goals.
• Plan, evaluate, and improve the efficiency of business processes and procedures to enhance speed, quality, efficiency, and output.
• Manage the preparation and maintenance of reports necessary to carry out the functions of the department. Prepares periodic reports for management, as necessary or requested, to track strategic goal accomplishment.
• Communicate regularly with other managers, the director, vice president, president, and other designated contacts within the organization.
• Perform other duties and responsibilities, as assigned.

Manager Job Requirements

• Knowledge and experience in business, supervision, and management.
• Knowledge of the functions, operation, and mission of the specific department.
• Better than average written and spoken communication skills.
• Outstanding interpersonal relationship building and employee coaching and development skills.
• Management experience in a team-oriented workplace preferred.
• Demonstrated ability to lead and develop a department and department staff members.
• Demonstrated knowledge of basic economics, budgeting, and accounting principles and practices.
• Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction.
• Excellent computer skills in a Microsoft Windows environment. Must include knowledge of Excel and skills in Access..
• Evidence of the ability to practice a high level of confidentiality.
• Excellent organizational management skills.

1. Lead and set a goal for sales and operation team

2. Set direction and guide the project team for all the project

3. Review value engineering and lean engineering

4. Liaising with main contractor, owner, stakeholder & consultant

5. Check and ensure the scope of work for all the fire protection system and services

6. Overseeing current project as well upcoming projects

7. Attend and conducting project review meeting with sales and operation team and attend client meeting

8. Ensure the project delivery as planned schedule and manage operational cost within the budget

9. Review and submit authority required documents

10. Monitor compliance of work with the workplace safety and health regulations

11. Maintain customer relationship

12. Other ad-hoc duties as assigned by managementCon

Manager Responsibilities:

• Delegating responsibilities and supervising business operations
• Hiring, training, motivating and coaching employees as they provide attentive, efficient service to customers, assessing employee performance and providing helpful feedback and training opportunities.
• Resolving conflicts or complaints from customers and employees.
• Monitoring store activity and ensuring it is properly provisioned and staffed.
• Analyzing information and processes and developing more effective or efficient processes and strategies.
• Establishing and achieving business and profit objectives.
• Maintaining a clean, tidy business, ensuring that signage and displays are attractive.
• Generating reports and presenting information to upper-level managers or other parties.
• Ensuring staff members follow company policies and procedures.
• Other duties to ensure the overall health and success of the business.

Manager Requirements:

• Bachelor’s degree in business, management, or related field.
• More education or experience may be preferred or required.
• Strong understanding of business management, financial, and leadership principles.
• Excellent communication, interpersonal, leadership, coaching, and conflict resolution skills.
• Time and project management skills.
• Ability to analyze processes and information, identify problems and trends, and develop effective solutions and strategies.
• Commitment to providing exceptional service to customers and support to staff members.