Location of Work : Jurong Island

The Resident Engineer shall be the Customer’s main point of contact on site in relation to the Long-Term Service Agreement (LTSA) and shall act as a technical representative of Mitsubishi Power (MPW) in relation to operation and maintenance of the Gas Turbine Combined Cycle (GTCC) Power Plant located in Jurong Island, Singapore.

The Resident Engineer needs to have strong technical knowledge in Gas Turbine Combined Cycle Power Plant. The role requires analyzing operational data to investigate various operation problems on turbines and auxiliary systems, trouble shooting a diverse range of problems that occur during operation and/or maintenance. With the support from the Singapore office and the Service Engineering Head Office in Japan, the Resident Engineer needs to be capable of providing solutions on an urgent basis.

The Resident Engineer must have experience completing Gas Turbine Combined Cycle Power Plant outages successfully and know how to coordinate with various internal stakeholders, vendors, technical advisors and local labour. The Resident Engineer must establish and maintain good working relationships with the Customer, ensuring that the customer’s technical issues and requirements are understood and addressed in an effective and timely manner.

The Resident Engineer shall be stationed at the site in Jurong Island during normal working hours (8 hours per day, 5 days per week, excluding public holidays), and at times when there is a substantial risk of Power Train operation interruption due to problems arising from the Power Train. As the Power Plant provides essential services, in the event of an emergency, the Resident Engineer shall be required to reach the Power Plant within specific required timeframe based on the service agreement with the customer, upon activation by the Customer to support the efficient recovery of the power plant.

Technical Support

The Resident Engineer shall act as the Customer’s interface for the flow of information to and from the Singapore office and Service Engineering Head Office in Japan. Such activities include but are not limited to:

· Establishing and maintaining good working relationships with the Customer, ensuring that the customer’s technical issues and requirements are understood and addressed in an effective and timely manner.

· Responding to and resolving internal and external customer requests for technical issues concerning relevant operation and maintenance matters of the GTCC Power Plant, making use of technical product knowledge and analytical skills while adhering to sound engineering principles, standards, practices and procedures.

· Communicating with and supporting the Customer to act on Technical Information notices to improve or upgrade the plant.

· Proactively identifying potential failures, assessing and controlling operational risks with support from the 24/7 remote monitoring hub and expert support

· Proactively advising and assisting the Customer in planning and executing relevant maintenance activities and coordinating with the Customer and MPW for the preparation of planned and unplanned inspection activities.

· Analyzing, tracking and reporting monthly Reliability, Availability, and Maintainability (RAM) data and relevant KPIs for the LTSA, for the purposes of invoicing and for monitoring performance · against the contractual guarantees and obligations. If necessary, recommend corrective actions.

· Reviewing and presenting the monthly monitoring diagnostic reports to the Customer.

· Reviewing and presenting the inspection findings and outage reports to the Customer.

Maintenance Work Coordination

The Resident Engineer shall be responsible for coordinating all activities provided by MPW under the LTSA, including but not limited to:

· Collaborating with the Customer, various MPW group resources (E.g. LTSA Program Manager, Technical Advisors, Field Services, Engineering) and Local Vendors (E.g. Labour, Onsite Machining, Local Workshop or other Third Party Services) in order to achieve the common goals with the Customer including but not limiting to health and safety, environmental protection, customer satisfaction, unit availability, reliability, performance and emissions

· Presenting and discussing with the Customer the scope and the planning of Planned/ Unplanned Maintenance

· Actively contributing in maintenance planning meetings, pre-outage and post-outage meetings between the Customer and MPW, confirming repair status with Repair Facilities.

· Supporting the Customer in the selection of spare parts to be kept on stock, aiming to increase the timely availability of necessary spare parts while optimizing inventory costs.

· Helping the Customer in selecting tools and equipment required for maintenance of the Covered Equipment.

· Coordinating dispatch of Parts and Technical Advisory Services

Troubleshooting/ Failure Investigations

The Resident Engineer shall be responsible to lead and/or support the troubleshooting of a diverse range of problems that may occur during Plant operation and/or Planned or Unplanned Maintenance, with the support from the Singapore office and Service Engineering Head Office in Japan. Such activities may include but are not limited to:

· Conducting fact-finding and communicating failure data between the Customer and MPW

· Analyzing operational data to investigate various operation problems on the Power Train and Auxiliary systems and suggesting necessary actions.

· Leading or supporting root cause analysis to determine the original cause of failures that led to plant trips or unplanned maintenance.

· Investigating problems that have occurred during maintenance works and be capable of providing solutions on urgent basis.

· Summarizing findings and conclusions in clear, logical and easily understood reports for external customers or internal departments.

Pre-requisites

Education level and relevant experiences

· Diploma/Degree in a relevant engineering or technical field

· More than 10 years of proven related work experience in the Power Industry

· Previous site work experience in Long Term Service Agreements, field service or maintenance and overhaul of CCGT power plants or industrial plants rotating equipment is preferable.

· Previous customer facing experience where there is regular interaction with plant personnel to provide support and resolve problems.

Knowledge and skills

· Knowledge of Gas Turbine Combined Cycle Power Plant Equipment operations and maintenance.

· Good communication skills.

· Able to develop and write clear and concise technical instructions, reports, specifications and recommendations.

· Able to work in a multidisciplinary team with people from different cultures and nationalities.

· Good Knowledge of MS Office software (Word, Excel & PowerPoint)

· Industry standard training courses on NDT, Machinery Diagnostics, Lubrication, Automation, Quality Control, Metrology would be an added advantage.

Site engineers work chiefly on construction projects. They form part of construction management and use their skills and expertise to guide crew members and ensure the successful completion of a project. Site Engineers frequently liaise with clients and negotiate with vendors and suppliers to secure the best deals.

SINOTCC, an Engineering, Procurement and Construction (EPC) firm specializing in PROCESS and GENERAL CONSTRUCTION, is looking for a suitable candidate to fill up the role.

- Bachelor Degree in Engineering (major in HVAC, Mechanical, Electrical, Instrumentation).

- At least 5 years experience working in the Process & Construction Industry

- Independent, hardworking and self-motivated

- Willing to travel overseas (if needed)

- Willing to work over time

- 5.5 days work week

- Salary Negotiable

Job Descriptions

1. Manage the day-to-day sales activities for the semiconductor manufacturing equipment products (e.g. CMP tool) within the designated sales territory so as to achieve the sales target set by management.
2. Monitor, regulate and direct the activities of the sales representatives to maximize the market opportunities.
3. To make forecasts / targets regularly and to monitor performance of the sales team in relation to these forecasts. Manager is expected to make directions for the team to achieve these sales targets
4. To drive new marketing promotion efforts and to work with EC on the implementing the marketing and promotions efforts for the semiconductor manufacturing equipment products (e.g. CMP tool)
5. To make, develop and manage the localized marketing and sales program for the sales territory.
6. To communicate with the sales team to understand customer demands and offer sales support where necessary.
7. To work with EC to set the industry pricing level.
8. To manage the SAP ERP system for monitoring the progress of quotations, purchase orders, delivery and invoicing of customers.
9. To work closely with EC on the new accounts and new products, using the local team to win new contracts.
10. Establish customer rapport an acceptance
11. Any other duties as assigned by the management

Job Requirements

1. Knowledge of commercial and shipping documents (Incoterms)
2. Knowledge of the semiconductor manufacturing equipment products(e.g. CMP Tools).
3. Diploma/Degree in Engineering or equivalent
4. Good people skills with a pleasant personality.
5. Strong communication, interpersonal and customer service skills.
6. Excellent presentation and negotiation skills.
7. Ability to work independently as well as collaboratively within the team.
8. Must be prepared to travel overseas for training and to our customers’ location in the region as required.

Preferably to have Sales work experience in Japanese company in semiconductor industry for more than 5 years.

(Those without the relevant experience may be appointed as Senior Sales Engineer initially with a view to be upgraded later)

(Those with more years of relevant experience may be appointed to a relevant management position)

Benefits

• 10days AL
• AWS
• VB depending of the team and company performance
• Transport allowance

Working Hours

• 5 days (9am to 6pm)
• Monday to Friday

. JOB DESCRIPTION

Job Description & Requirements

1. Experience in metal fabrication n installation works

2. Proficent in mechanical engineering drawings n autocad

3. Perform project management n supervise site works

4. Able to coordinate with customer, Vendors n fellow workers to meet project dateline

5. Posses a class 3 licence with driving experience

Retrofit Engineer

Do you enjoy being part of team that provides high-quality services for our customers?

Would you like to be in a team delivering world class service to our customers?

Be part of a successful Customer Service team

Baker Hughes Valves is a global technology company that designs, develops and manufactures the highest quality, most accurate and reliable control valves and safety valves products, services and solutions to our customers across a large range of process industries.

Partner with the best

As a Retrofit Engineer, you will be in charge of BoM and technical support for Pressure Safety Valves (Consolidated) and Control Valves (Masoneilan). You will also provide a global engineering support focused on Channel Partners and Aftermarket Centers for the selection, repair, maintenance, and replacement of Masoneilan and Consolidated products.

As a Retrofit Engineer, you will be responsible for:

• Executing design and analysis of assigned projects to develop valves meeting customer application needs, specification requirements, complying with local design/product standards.
• Reviewing customer specifications and “translating” customer specification in to order instructions for manufacturing of valves.
• Providing Retrofit solutions, with bills of material, drawing information, test specifications and processing instructions to meet quality and manufacturing requirements.
• Creating the design review process, ensuring accuracy, quality and design for manufacturability goals are met.
• Enabling the use of design tools (like 2D / 3D CAD (SolidWorks / ProE / UG), Excel, and in-house design calculations.
• Engaging with sales to support the quotation activities.
• Identifying, Own and Enable such initiatives which are in line with business objectives.

Fuel your passion

To be successful in this role you will:

• Have a Bachelor's in Mechanical Engineering (or) Equivalent from an accredited uni or college.
• Have a minimum 12-15 yr of experience in an Engineering Design / Analysis /Scientific / Technical Position.
• Have at least 7 yr of Control Valve and/or Safety valve Design Expertise.
• Demonstrate effective communication and interpersonal skills with the ability to work as a team.
• Have knowledge of control valve and/or safety valves including instrumentation and actuator.
• Have good understanding and experience in Valves regarding applications, Material of Construction, Non-Destructive Tests.
• Have experience with ASME B16.34 and PED, 3D design (Solid works/Ansys), mechanical design & tech writing.
• Have basic knowledge of manufacturing processes such as casting, machining, welding or cutting etc.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

Responsibilities:

• Design of heavy structures made of aluminium alloy
• Liaise with clients, vendors and third parties on technical issues
• Cooperate with project team on the project planning and execution
• Supervise/check the design drawings and material take-off
• Perform structural analysis and prepare structural analysis report

Requirements:

• Degree in structural/marine/naval architecture/civil/ engineering
• Min. 5 years experience in structural design in offshore/marine/civil industry
• Strong technically and competent in structural design and analysis
• Familiar with and experience in international structural design codes, standards and project specifications and structural design software packages
• Experience in aluminium design is not required as training will be provided
• Good written and spoken English
• Come and convince us why you are the best person for the job

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a skilled Process Engineer to design, implement, and optimize processes. Key responsibilities include reviewing process design documents, participating in safety and design reviews, managing change control, vendor relations, and quality risk assessments. You will oversee commissioning, qualification, and validation activities while ensuring HSE compliance. Additionally, you'll troubleshoot process issues, manage deviations, and provide SME input. Collaboration with stakeholders, SOP generation, and completing training on time are essential for success in this role.

Key Responsibilities

• Lead Process Design: Develop and review key process design documents (P&IDs, PFDs, URS, data sheets) to ensure optimal system performance and compliance.
• Drive Safety & Design Excellence: Contribute to safety and design reviews (3D models, HAZOP, DQ) to guarantee robust and safe process designs.
• Manage Project Changes: Oversee site and project change control, ensuring smooth transitions and effective execution of process improvements.
• Vendor Relationship Management: Cultivate strong vendor partnerships, ensuring timely and high-quality deliverables.
• Engage in Quality Risk Assessments: Actively participate in risk assessments to enhance process quality and minimize operational risks.
• Review & Approve Documents: Ensure all relevant technical documents are thoroughly reviewed and approved, maintaining high standards.
• Monitor & Report Progress: Track and report the status of assigned projects and tasks, ensuring transparency and alignment with timelines.
• Coordinate Field Work & Commissioning: Lead and coordinate field work, including commissioning, qualification, and validation activities, ensuring smooth implementation of processes.
• Champion Health, Safety & Environment (HSE): Take full ownership of HSE responsibilities in your designated area, ensuring strict adherence to safety standards.
• Solve Process Issues: Troubleshoot and resolve process-related issues, applying your expertise to maintain smooth operations.
• Manage Deficiencies & Deviations: Effectively address any deficiencies or deviations, working proactively to resolve them.
• Provide Expert Input: Offer Subject Matter Expert (SME) input as needed, driving improvements and operational excellence.
• Support SOP Creation: Contribute to the development and refinement of Standard Operating Procedures (SOPs) to streamline operations.
• Collaborate with Stakeholders: Coordinate with key stakeholders to ensure alignment and successful project outcomes.
• Ongoing Learning: Complete required training on time, keeping up to date with the latest tools, technologies, and industry standards.

Required Qualifications

• Minimum Degree in Engineering or Science Disciplines
• Minimum 3 years’ experience in a related field / Pharmaceutical Industry
• Proven track record in following and promoting Safety in all aspects of your role
• Strong process and automation knowledge, adequate knowledge in utility and HVAC
• Project management / coordination experience
• Proactive and self-motivated
• Adequate knowledge on cGMP and other regulatory requirements, guidelines and industry best practices
• Be IT literate and familiar with Microsoft office suite of applications
• Demonstrated proficiency of written and verbal communication skills in English (including technical writing and presentations) with ability to communicate and collaborate effectively with technical and senior management staff

Why join us?

• Generous Leave Policy including Elderly Care Leave for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions?
If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a Validation Engineer to manage and execute validation activities, including equipment, utilities, and facility qualifications. You will develop and support the creation of validation documentation, apply a science-based approach to validation, analyze data, and assist with investigating deviations. Collaboration with cross-functional teams and adherence to safety, quality, and regulatory standards are key aspects of this role to ensure the successful delivery of validation projects.

Key Responsibilities

• Lead and complete critical validation activities, including equipment and utilities qualification, facility qualification (aligned with EU Annex 1), and thermal mapping for controlled temperature chambers to ensure precise temperature control and compliance.
• Perform thorough thermal mapping as part of the qualification process for temperature-controlled chambers, ensuring that all temperature conditions are validated according to industry and regulatory standards.
• Develop and support the creation of essential validation documentation, such as Risk Assessments, plans, protocols, and reports.
• Apply a science-driven and risk-based approach to all validation activities.
• Analyze, interpret, and summarize data from thermal mapping and other validation studies to ensure compliance and operational accuracy.
• Investigate and support the resolution of deviations or non-conformities identified during thermal mapping or other validation activities.
• Collaborate effectively with stakeholders, including cross-functional teams, clients, and corporate functions, to ensure seamless project delivery.
• Guarantee the safety, quality, and timely completion of thermal mapping and validation projects.
• Ensure adherence to validation lifecycle processes (e.g., URS, FAT/SAT, commissioning, IO/PQ protocols) and compliance with international regulatory standards.

Required Qualifications

• Bachelor`s degree in a science or engineering discipline.
• Minimum of 2 years of experience in pharmaceutical CQV.
• Strong understanding of validation lifecycle processes and regulatory guidelines.
• Familiarity with industry best practices for equipment and utilities qualification.
• Fluent in written and spoken English.
• Adaptable to a fast-paced, dynamic work environment.
• A quick learner with a proactive "Can-do" attitude.
• Exceptional time management skills with strong attention to detail.
• Proficiency in presentation and facilitation is an advantage.

Why join us?

• Generous Leave Policy including Elderly Care Leave for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions?
If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are seeking a Utilities Engineer to ensure the proper maintenance and compliance of facility systems and equipment according to design specifications and GMP standards. The engineer will be the Subject Matter Expert (SME) for the operation and maintenance of utilities systems, offering technical expertise for routine operations readiness. Responsibilities include ensuring adherence to standards, supporting the development of commissioning and qualification documents, and ensuring compliance with regulatory requirements. The role also involves troubleshooting technical issues, collaborating with teams, and promoting knowledge sharing.

Key Responsibilities

Operational Excellence, Continuous Improvement, and Daily Operations:

• Lead and support continuous improvement initiatives for utility system operations, maintenance, and reliability programs.
• Establish key metrics to ensure optimal performance of utility operations.
• Lead and support utility projects by reviewing engineering design documentation and related drawings.
• Lead and support Site Acceptance Tests (SAT), commissioning, and system testing to meet User Specification Requirements (URS).
• Participate in system walk-downs to ensure reliable utility system operations.
• Safety and Quality Compliance Management:
• Lead and support audit readiness for regulatory inspections to ensure compliance with site and global SOPs, GEP, and GDP.
• Assist in the development, revision, review, and approval of Standard Operating Procedures (SOPs), Risk Assessments, Preventive Maintenance Programs, and Job Plans.
• Lead and support deviation investigations, ensuring Corrective and Preventive Actions (CAPA) are implemented to prevent recurrence.
• Lead and support change control and evaluation initiatives for continuous improvement, enhancing system reliability and operations.
• Actively promote and practice Amgen's Safety Culture.

Sustainability:

• Lead and support the site sustainability program, analyzing energy consumption data, benchmarking overall usage, and identifying opportunities for optimization.
• Lead and support the development of business cases to drive sustainability targets for the site.
• Generate utility consumption data for regulatory authority submissions.

Required Qualifications

• Diploma/Degree in Engineering, Mechanical, Electrical, Chemical
• Ability to work independently and collaboratively
• Good interpersonal and communication skills with high computer literacy
• Strong team player, able to effectively work within and across teams
• Fluency in communications skills, both oral and written, including presentation skills
• Familiar with documentation in a highly regulated environment
• Interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met
• Ability to tactfully negotiate and positively influence peers
• Strong analytical skills to identify potential improvement opportunities

Why join us?

• Generous Leave Policy including Elderly Care Leave to care for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

Job Requirements:

• Bachelor's degree in Electrical Engineering, Automation, or a related field.
• Proven experience in industrial automation systems, control circuits, and programming languages such as Python, C, or equivalent.
• Familiarity with industrial communication protocols, fieldbus protocols, MCCBs, contactors, and electrical schematics.
• Strong problem-solving and troubleshooting skills.
• Experience working at stations in overseas locations.
• Willingness and ability to travel and be stationed in developing countries and work in high stress environment and multitask.
• Minimum of 1 year of experience in marine equipment training and work in the marine field.
• Knowledge or experience with Dual Fuel (DF) Engines is a significant advantage.
• Required skills to communicate with customers for Sales and technical assistance.

Job Description:

• Support the implementation and execution of Marine / Industrial Remote Monitoring System projects.
• Perform troubleshooting, maintenance, and repair of electrical systems and circuits.
• Train and assist the overseas team in electrical engineering processes and best practices.
• Provide support for other technical needs as required.
• Assist with IT troubleshooting and maintenance of on-site IT equipment.
• To support the sales activities.
• Expand sales for existing & new customers and product portfolio and Implementing marketing strategies and analyzing trends and results.

Job Description:

• Provide pre and after sales technical support to customers
• Perform field service work on site for our range of products
• To clarify product applicaton issues with head office R&D in Japan
• Support Sales Engineers in the areas of product applications, sizing and selection of suitable SMC components to meet end user requirement

Job Requirement:

• Diploma in Electronics/Mechatronics
• Experience in control system (servo drive)
• Minimum 5 years of experience in PLC programming (Omron, Panasonic, Beckhoff, Allen Bradley etc) for senior position

PROJECT ENGINEER will be under service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.Working in workshop and vessels.
Good communication skills with Ship Owners and Superindents.
Good time Management and work Independently.
To perform any other duties & Responsibilities assigned by superiors from time to time.
Ability to demonstrate and implement cost -saving measures.
Ability to lead to manage project operations, schedule and specifications.
Requirements:- Min 5 Years experience .- Knowledge of MS office.- Able to work OT.- Excellent coordination skills.-

JOB DESCRIPTION:

• Develop and manage the mechanical engineering works schedule in alignment with the overall project master schedule.
• Collaborate closely with clients, consultants, subcontractors, and other departments to address technical matters related to mechanical work.
• Possess the necessary qualifications, competencies, and skills to effectively manage and supervise mechanical works.
• Lead the on-site mechanical construction team to ensure smooth execution of work by subcontractors.
• Ensure full compliance with relevant standards, codes of practice, and safety regulations.
• Oversee all Mechanical issues on-site to ensure proper resolution.

REQUIREMENT:

• Diploma in Mechanical Engineering.
• Minimum 3 years’ working experience in the Electrical / Mechanical Engineering construction industry experience;
• Possess strong mechanical knowledge with hands-on experiences;
• Strong Knowledge of Mechanical details, working drawings and local construction practices

Project Engineer will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. Attend and manage dealing with vendors, designers, classification, and flag statutory on engineering issues

5. Reviewing technical specification and drawings from designer meeting owner, class, and customer requirements

6. To perform any other duties & Responsibilities assigned by superiors from time to time.

7. Ability to demonstrate and implement cost -saving measures.

8. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Proficient in Microsoft office applications: Word, Excel, PowerPoint & Outlook

-Proficient in AutoCAD application

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

- Possess positive working attitude

Job Summary:

We are looking for a highly skilled High Voltage/Medium Voltage Engineer to join our team. The ideal candidate will be responsible for the design, development, maintenance, and troubleshooting of high voltage and medium voltage systems in offshore substations. This role requires extensive knowledge of electrical engineering principles, offshore operations, and safety regulations.

Responsibilities:

• Design and Development: Collaborate with the system supplier to design and develop HV/MV systems and equipment (Electrical, Protection & SCADA) for offshore substations.
• System Analysis: Familiar with Electrical calculations and system analysis to determine specifications and ensure optimal performance to meet client requirements.
• Compliance: Ensure all HV/MV systems comply with relevant safety standards and regulations.
• Inspection and Testing: Perform regular inspections, conduct factory testing and support in field commissioning to assess the technical compliance and performance of HV/MV equipment.
• Troubleshooting and Technical Support: Diagnose and provide technical support in resolving technical issues on HV/MV systems and guidance to junior engineers and technicians.
• Collaboration: Work closely with other engineers, technicians, vendors and regulatory bodies and clients to address and solve problems related to HV/MV systems.
• Documentation: Prepare detailed reports, system architecture diagrams, purchase specifications, functional description and control philosophy to document system designs, construction, modifications, and maintenance activities.
• Preventative Maintenance: Collaborate with the system supplier to develop and implement preventative maintenance procedures for HV/MV systems to ensure safety and performance.

Requirements:

• Education: Minimum bachelor’s degree in electrical engineering or related field.
• Experience: At least 3 ~ 5 years of relevant experience in high voltage or medium voltage engineering, preferably in an offshore environment.
• Skills: Strong analytical and problem-solving skills, excellent communication and teamwork abilities, proficiency in using electrical design software.
• Certifications: Relevant certifications in high voltage or medium voltage engineering are a plus.
• Knowledge: In-depth knowledge of electrical engineering principles, high voltage systems, offshore operations, and safety regulations.
• Innovation: Ability to stay up to date with the latest advancements and best practices in HV/MV engineering.
• Leadership: Capability to lead and mentor junior engineers and commitment to safety.
• Adaptability: Ability to work as a team in challenging offshore environment and possess good planning, organizational, interpersonal skills with adaption to ever-changing

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies.

By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.

We are seeking an Electric System Design Engineer to design hydraulic and electric systems for Ro-Ro equipment. As a key team member, you will be responsible for developing high-performance systems that meet safety, regulatory, and operational requirements in Marine Industry. Fresh graduates from Electrical, Mechatronics, or Mechanical Engineering backgrounds are encouraged to apply, as we provide training and development opportunities to enhance your skills.

Qualifications:

• Bachelor’s degree or higher in Electrical, Mechatronics or Mechanical Engineering.
• Strong problem-solving skills and active communication skills.
• Excellent interpersonal and collaboration skills.
• Experience in the design of hydraulic and electric system add value.
• Experience in both of Shipbuilding and Marine industry will be a significant plus.

ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

RESPONSIBILITY
· Plan and allocate tools, material and manpower for fabrication;
· Ensure that all the technical reviews by engineering team comply with project requirements;
· Coordinate all technical queries with related parties – engineering team, client, vendor etc;
· Assist Project Manager in streamlining work processes;
· Coordinator with team to review all subcontract and supplier shop drawing, product data, samples,
manuals etc for all compliance with contract documents;
· Manage vendor documents for all equipment;
· Monitor and ensure all the vendor equipment delivery are on time, including checks on inspection status and requirement;
· Prepare tender submission, cost estimation and project change request;

*Prepare monthly P&L reporting.

*Able to use AutoCAD – Advance Steel Software.
· Any other duties as assigned.

Please note that duties of the Employee may change and develop over time.

REQUIREMENTS

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechanical) or equivalent

· Proficient in design software such as PV AutoCAD

· Proficiency in English language (spoken and written) with strong communication skills