Under limited supervision, the technician will install, service, and repair electronic equipment on board ships. You will test, adjust, and troubleshoot components, PCBs, sub-assemblies, and antennas. Load, update, and modify software. Use your knowledge of electronic theory and circuitry to address a variety of technical problems. Make intelligent use of complex schematics, and manuals to accurately achieve assignments. Upon completing the assignment, you will compose a detailed service report.

most Original Equipment Manufacturers in the Marine/ Oil & Gas industry including and not limited to: SPERRY, FEDERAL SIGNAL, SEATEL, SAILOR, FURUNO, JRC, JOTRON,DANELEC, NINGLU, SKIPPER, ORLACO,HIKVISION,AXIS, PELCO, etc

Roles & Responsibilities

· Prepared project status report by collecting analyzing, and summarizing information and trend

· Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.

· Maintains safe and clean working environment by enforcing procedures, rules, and regulations

· Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.

· Monitor and ensure all works carried out in accordance to contract and specifications

· Attend meeting and liaise with Consultants and Contractors

· Assist Project Manager

Requirements

· Minimum 2-years’ experience

· Possess relevant degree in building/ civil engineering

· Able to work independently

· Hardworking and responsible

· Able to communicate with all levels at site

Job Description:

• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Site inspection & upkeep site record.
• Liaise with consultants, client etc.
• Other duties assigned by Site Manager / PM.

Requirements & Qualifications:

• Graduate Bachelor in Engineering (Civil) or equivalent.
• 3-5 years work experience in Building Construction.
• Able to work independently.
• Autodesk Revit MEP experience will be an advantage

• Developing detailed designs.
• Doing feasibility assessments and site inspections.
• Preparing and implementing project plans.
• Researching and providing estimates for projects.
• Reviewing government regulations and ordinances.
• Monitoring and optimizing safety procedures, production processes, and regulatory compliance.
• Making recommendations or presenting alternative solutions to problems.
• Confidently liaising with clients and other professional subcontractors.
• Project management duties (e.g. managing budgets, resources, and deadlines; acquiring and compiling quotes, etc.).

Responsibilities

• Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety.
• Leads operations, assigns work orders, and/or provides technical and procedural training of coworkers and subcontractors. Arranges for subcontractors as needed.
• Consults with clients to schedule preventive maintenance and other downtime to minimize business interruption and inconvenience.
• Formulates and implements a preventive maintenance program to ensure that building machinery and systems meet or exceed their rated life.
• Monitors building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.
• Oversees and inspects the work performed by engineering staff. Determines that work is complete, equipment is fully functional and client space is in prime working condition.
• Responds quickly to emergency situations, summoning additional assistance as needed.
• Assist as needed with routine preventative maintenance functions (filter changes, belt replacements, water treatment, etc.)
• Ability to perform work independently after being given specific instructions.
• Must be able to work effectively with other team members and safety conscious environment.
• Follow company and customer rules and guidelines.
• Respond to customer requests.
• Performs other duties as assigned.

Qualifications & Requirements

• College Graduate (Engineering i.e., mechanical, or Electrical or any related courses)
• IFM property Management experience for commercial offices (At least 4-5 years)
• High IFM and Technical knowledge particularly in equipment’s and engineering (mechanical, electrical and such)
• Knowledgeable in equipment’s such as genset, UPS, BMS, FDAS, etc Certification on Safety Training would be an advantage.
• Additional certification in three or more of the following: HVAC, electrical, mechanical, HVAC and refrigeration systems, process controls, mechanical power transmissions, painting, plumbing, carpentry, or engine repair.
• Certifications/licenses as may be required by local or state jurisdictions.

Why join Cushman & Wakefield?

As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from;

• Being part of a growing global company;
• Career development and a promote from within culture;
• An organisation committed to Diversity and Inclusion

We're committed to providing work-life balance for our people in an inclusive, rewarding environment.

We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program.

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, gender, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status.

We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.

• Young & energetic

• Committed to teamwork

• PLC programming

• Minimum Diploma or experience in relevant field (e.g., electronics/ electrical)

• Control panel fabrication

• AutoCAD

• Field troubleshooting

• Site survey/coordination

• Traveling to client locations for equipment inspection.
• Inspecting equipment and conducting routine maintenance.
• Servicing and replacing old or faulty equipment.
• Troubleshooting equipment malfunctions.
• Removing old equipment and installing new machines.
• Proving technical support and training on new equipment.
• Responding to customer call-outs.
• Adhering to all safety and performance regulations.

Maintenance Engineer Requirements:

• Bachelor’s degree in mechanical or electrical engineering.
• Proven work experience as a maintenance engineer.
• Knowledge of EPA and OSHA guidelines.
• Advanced knowledge of mechanical, electrical, plumbing, and heating systems.
• Ability to read system schematics.
• Advanced troubleshooting skills.
• Understanding of safety and equipment procedures.
• Good communication and training skills.
• Ability to work with heavy equipment.

Job requirements:

1. Technical Skills

• Knowledge of operating systems (Windows, Linux, macOS)
• Experience with networking (DNS, DHCP, VPNs, routing, firewalls)
• Proficiency in server management (file servers, database servers)
• Expertise in virtualization and cloud technologies (VMware, Microsoft Azure)
• Backup and disaster recovery strategies
• System monitoring and performance tuning

2. Security and Compliance

• Security best practices (firewalls, antivirus, encryption, access control)
• Understanding of data protection regulations (GDPR, etc.)
• Experience with patch management and vulnerability assessment

3. Troubleshooting and Support

• Incident response and problem-solving skills
• Helpdesk or user support experience
• Ability to diagnose and resolve hardware/software issues

4. Automation and Scripting

• Scripting skills for system management tasks (PowerShell, Bash)
• Familiarity with automation tools (Power Automate, P)

5. Documentation and Reporting

• Ability to create and maintain system documentation
• Report generation for performance, security, and usage metrics

6. Collaboration and Communication

• Experience working with cross-functional teams
• Ability to work closely with IT team members from other locations
• Experience with team management
• Ability to work closely with IT team members from other locations
• Effective communication with non-technical stakeholders

7. Project Management and Planning

• Ability to handle infrastructure upgrades and migrations
• Experience with planning and executing IT projects

8. Certifications

• Relevant certifications (Microsoft, Cisco, AWS, etc.)

9. Experience in IT Infrastructure Management

• Familiarity with managing and maintaining a site’s IT infrastructure
• Knowledge of industry-standard tools for monitoring and managing systems

10. Adaptability and Learning

• Willingness to stay current with evolving technologies
• Flexibility in adapting to new systems or processes

Qualification requirements:

1. Bachelor's Degree (preferred, but not mandatory):

• Computer Science
• Information Technology (IT)
• Information Systems
• Network Engineering
• Cybersecurity (optional but beneficial)

2. Alternative Qualifications:

• Diploma in a related field (e.g., IT support, network administration)
• Technical Certifications (in lieu of formal degrees, or as an addition):
  • Microsoft Certified: Windows Server, Azure, etc.
  • Cisco Certified Network Associate (CCNA)

3. Relevant Work Experience (practical hands-on experience):

• Minimum of 5 years of experience in IT support, system administration, or a related field

Job Description

• To assist Engineering Manager to ensure smooth running of daily engineering operations.
• To be competent to set up, configure, operate and maintain a wide variety of electronic equipment involved in outside broadcasting production, including, but not limited to HD Video, UHD Video, Audio and Communication Equipment.
• To be competent in the use of Radio Frequency Equipment and antenna systems
• To be able to troubleshoot broadcasting equipment to a system level and able to communicate and report to the office and manufacturer for problem solving.
• To undertake project work from site surveys to delivering in a professional and timely manner.
• To assist in keeping equipment updated with the manufacturers latest software releases.
• To be responsible for maintaining technical equipment and systems to the required safety and technical standards with minimum disruption to operational activities.
• To be willing to learn and practice the new technologies used by NEP Singapore that have not been experienced or worked with before.
• To be able to direct, instruct and manage assistant engineers and possible system integrators on projects.
• To work safely at all times, complying with statutory safety requirements from NEP Singapore Health and Safety Policies.
• To be able to draft technical reports of field work.
• To be competent in reading and designing of the engineering workflow.
• Prepare technical documents for the preparation of projects and amend as necessary throughout the life of the project
• Attend technical meetings for the projects when is necessary.
• To be flexible with work time and travel.

Requirements

• Minimum of 5 years’ experience of working in broadcast television. Preferably with direct experience of working in an Outside Broadcast environment.
• Familiar with the operation and programming of Routers, Switchers, Tally Systems, Multiviewers, etc
• Familiar with the setup and integration of cameras, lenses, ccu’s etc.
• Experience with EVS equipment including LSM, X-File, X-Hub, IP Director
• Relevant engineering qualifications or a proven track record
• An understanding of radio, television, and the associated transmission and carrier systems.
• Understanding of computers, servers, IT systems and networks.
• A keen interest in broadcast technology, its development and application in the region.
• Knowledge of Cisco Switches and IP technology an advantage.

• Managing the day-to-day planning and engineering initiatives for the project
• Responsible for project functions; e.g. Site Management, Project Control Management, Engineering Management, Procurement, Construction Management, etc.
• Supervise and prepare methods for the project and any installation procedures, task plans and guidance
• Monitor site progress against budget and forecast schedule
• Ensure EHS and QA/QC standards of works by trade cons are met
• Ensure accurate and timely reporting of works progress to Senior Manager
• Identify and notify Senior Manager and Executive Manager (PMO) of any additional works or changes that constitute a variation
• Always ensure coordination and communication with all trade cons
• Prepare meeting minutes for project meeting
• Manage project closeout and obtain all warranties for final acceptance
• Support tender processes

Responsibilities:

• Design & Development: Design, build, and maintain efficient, reusable, and reliable code.
• Testings & Quality Assurance: Assist in the integration testing, system testing, User Acceptance Test (UAT) & implementation activities to fix the reported problems/bugs of the system to ensure the smooth execution of programs in the production environment.
• System Analysis: Analyze system requirements and contribute to development. Participate in requirements gathering; work with Business Analysts in reviewing and refining functional specifications.
• Performance Optimization: Ensure the best possible performance, quality, and responsiveness of applications.
• Issue Resolution: Identify bottlenecks and bugs, and devise solutions to mitigate and address these issues. Investigate all reported problems/errors & initiate amendments & testing so that the system can operate correctly & efficiently.
• Planning & Support: Provide support during sprint planning and production planning. Work closely with various application teams to support different types of releases.
• Release Management: Assist with paperwork and processes related to software releases.
• Automation & Stabilization: Offer solutions to improve and stabilize automation efforts, reducing manual work.

Requirements:

• Bachelor's degree in Information Technology, Computer Science or Engineering related studies.
• At least 7 years of experience in coding and software development & support using Java/.NET/C++/Python, and jQuery, Angular and Bootstrap.
• Strong oral, written and interpersonal communication skills with the ability to interact and communicate effectively with all levels of management, users and vendors.
• Core Java & Frameworks: Core Java, with a focus on Java 8 or later versions. Experience with Java 17 is a plus.
• .NET framework: C#, ASP.NET, ASP.NET MVC, ASP.NET Core, Entity Framework
• Experience in web application development using modern languages e.g. Golang, TypeScript is advantageous.
• Linux Proficiency: Strong command of basic Linux commands and shell scripting; comfortable working in a Linux environment.
• Memory Management: Clear understanding of Java memory management, including garbage collection and memory allocation.
• Multithreading & Concurrency: In-depth knowledge of multithreading and concurrency concepts, including the use of volatile and Atomic classes.
• Data Structures: Well-versed in data structures
• Database Expertise: Deep knowledge in Relational Database Management System (RDBMS) such as MSSQL, Oracle and SQL language (coding).
• Experience with cloud platforms e.g. Amazon AWS, Google Cloud Platform (GCP), Azure etc.
• Migration Experience: Hands-on experience migrating from Spring to Spring Boot, and/or ASP.NET to ASP.NET Core.
• CI/CD Tools: Familiar with Jenkins and Bitbucket.
• Project Management Tools: Well-versed with JIRA.
• Enhancements & Migrations: Experienced in handling enhancements and migrations.

Job description:

• Assist in the design, development, and testing of engineering projects under the supervision of a Senior Engineer.
• Conduct preliminary surveys and collect data for project planning.
• Prepare engineering plans, drawings, and specifications using CAD software.
• Perform regular inspections of equipment and ensure maintenance schedules are followed.
• Collaborate with other engineers and technicians to troubleshoot and solve technical issues.
• Monitor project progress and ensure adherence to safety standards and regulations.
• Maintain detailed reports and documentation related to projects.

Requirements:

• Diploma in Engineering (preferably in Precision Engineering).
• Strong analytical and problem-solving skills.
• Practical experience with CAD software.
• Ability to work collaboratively in a team environment.
• Good communication and organizational skills.

Responsibilities:

·Driving Root Cause analysis in problem diagnosis from customer anomaly to ensure problem prevention and resolution implementation ensuring effectiveness

·Management of Change communication to customer for approval to implementation

·Develop, implement, and improve the department and product total quality system to assure product specification is met

·Facilitate and work with team members on quality improvement to the product by providing technical guidance in QE tools applications

·Perform quality system or process audit to assure quality systems are in place

·Support the viper manufacturing in ensuring product meets the established standards of quality including reliability, usability and performance required

·Establish & Implement manufacturing quality metrics and lead team on to achieve the goal and continuous improvement

·Meet Plant/Department cost & quality objectives

·Implement lessons learned across manufacturing and also new products development projects

·Perform special projects to support continuous improvement on an ongoing basis thru functional standardization and implement process improvement ideas in primary work area.

·To adhere to the Health & Safety regulations as set out by the EHS Department and any other Government regulations

EDUCATION AND EXPERIENCE (Minimum Qualifications)

Degree in Electronics Engineering

5 years of experience in a Quality/Engineering in Product Design Engineering/Manufacturing environment preferred

SKILLS

Analytical problem-solving skills

Proficient oral and written communication/presentation skills

Basic print reading and interpretation of specification skills

Good knowledge of FMEA, Control Plan

Advanced statistical experience with quality tools usage and Product Design Development Cycle is preferred

Certified Design for Six Sigma/Six Sigma Black Belt/Reliability Engineer will have an added advantage

*Disclaimer statement:
Career Scam Disclaimer: BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website. To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner. Applicants should never provide their Social Security numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online. Job applicants are invited to contact BorgWarner through BorgWarner’s website to verify the authenticity of any employment opportunities

Responsibilities:

• Responsible for new business account development expansion and identify business opportunities.
• Conducts sales calls, prepares, and performs company and proposal presentations.
• Leads sales enquiry, understand customer requirement and work with internal technical team to submit project proposal.
• To process and monitor the request for quote process, from enquiry to propose a quotation for management review.
• To formalize the quotation and proposal, submission to customer and follow up.
• Establish rapport, build relationships and constant liaison with customers on future projects.
• To provide sales projection and forecast.
• Interact with internal teams on new project development.
• Establish assembly process instructions and test plans.
• Consolidate assembly process evaluation or test reports for review and control.
• Ensure that parts or components ready for assembly pilot run.
• Ensure that manufacturing process documentation compliance and updated.
• Liase on assembly fixtures, tools and equipment.
• Ad-hoc projects as assigned.

**Successful candidate will be provided on-the job training

Requirements:

• Diploma in Mechanical / Manufacturing Engineering.
• Min. 3 years of sales experience in plastic injection molding industry.
• Have good written, oral or interpersonal skills.
• Equip with good self-confident when conducting presentation.
• Have proactive negotiating skills with customers & supplier.
• Ability in follow up sales account and maintain sales.

Roles & Responsibilities

Senior Project/Site Engineer is responsible for assisting the Project Manager on the progress of the projects/site works and manpower related aspects of the project. They are to oversee drawing management and make sure the updated drawings to the clients and subcontractor are issued.

Job Responsibilities:

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, client & main / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities
• Lead a team of supervisors / foreman for works coordination with main/sub-contractors and/or authorities and/or consultant on project progress and technical issues
• Assist in preparation of method statement and construction sequence for project implementation
• Assist project manager in Project Costing, monthly progress claims and monthly progress report
• Support Quantity Surveyor (QS) in verifying progress payments and claims
• Coordinating the handing-over of completed works to the client and completion of the necessary rectification works

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering
• Minimum 3-6 years of relevant working experience

Job Description

Overall Responsibility:-

Technical Sales Engineer primarily responsibility is to achieve the sales revenues set by the company or exceed the sales revenues agreed upon. Develop new customers while maintaining a good relationship with the existing customers. Maximize profitability in preparing costing prior to quoting to the customers.

Key Areas of Responsibility:-

1. The Sales Executive key roles and responsibility is to solicit for sales of M&D product and services in your assigned market and customers including the final collection of any monies owing to the company.

2. You are to develop new accounts and grow the market shares of existing customers.

3. Formulate sales strategies to meet company's growth direction and plan for annual sales revenues.

4. To regularly report the sales activities and market intelligence to the immediate supervisor regarding customers and competitors movement.

5. Handle all customers issues related to technical specifications, quality and delivery diligently and feedback to the management and/or suppliers for immediate action when necessary

6. Constantly working very closely with the production, quality control team and customers to bridge the understanding in manufacturing capabilities, production costing and delivery issues

7. Provide technical support/design matters and advise costing to other Account Manager when necessary

8. The jobs responsibility may change from time to time to be determined by the company

Job Description:

• Create, implement, and maintain robust CI/CD pipelines for seamless software and firmware delivery.
• refine and optimize CI/CD processes to ensure efficiency and reliability.
• Partner with developers, evaluation teams, and QA engineers to ensure flawless integration.
• Support and enhance existing software solutions to meet evolving business needs.
• Design and develop cutting-edge automated test tools to support quality assurance and rapid development.

Job Requirements:

• Candidate must possess at least a Bachelor’s degree in Computer Science, Engineering, or a related field.
• Preferably have 2 years of working experience, candidate with no working experience is welcome to apply
• Strong experience with C++, C#, and/or Java programming languages.
• Proficiency in Windows and Linux environments.
• Hands-on experience with Jenkins and similar CI/CD tools.
• Exposure to Docker and container orchestration tools such as Kubernetes is a plus.
• Exceptional analytical and troubleshooting skills with a keen attention to detail.
• Strong communication and collaboration skills to thrive in a cross-functional environment.

Interested applicants, please send in your resume stating your date of availability, current and expected salary.

The individual will have a strong background in designing, developing and testing complex hardware systems.

This position involves working across multiple phases of product development cycle, from design to implementation. He/she should be self-motivated, resourceful and proactive, able to work independently in a fast-paced environment and closely with multi-discipline professionals to support project or product development

Responsibilities

1. Design and simulate electronics circuitry, including microcontrollers, SoC, DDR, wire & wireless communication interface and power supply.
2. Circuit draft and schematic capture with popular EDA tools.
3. Perform prototype testing, system integration, debugging and troubleshooting to identify and resolve hardware related issues.
4. Generate documentations on design concepts, specifications, test reports and verification reports, etc.

To supervise the construction of bored tunnel structures in compliance with the requirements of the BCA ACT & Regulation, and to the requirement of the contracts with the client. Lead a team of Resident Technical Officer in the supervision works. Minimum 3 years of supervision experience in civil engineering projects. Underground/tunnelling supervision experience will be an advantage. Registered Resident Engineer by IES/ACES.

To supervise the construction of bored tunnel structures in compliance with the requirements of the BCA ACT & Regulation, and to the requirement of the contracts with the client. Lead a team of Resident Technical Officer in the supervision works. Minimum 3 years of supervision experience in civil engineering projects. Underground/tunnelling supervision experience will be an advantage. Registered Resident Engineer by IES/ACES.

To supervise the construction of bored tunnel structures in compliance with the requirements of the BCA ACT & Regulation, and to the requirement of the contracts with the client. Lead a team of Resident Technical Officer in the supervision works. Minimum 3 years of supervision experience in civil engineering projects. Underground/tunnelling supervision experience will be an advantage. Registered Resident Engineer by IES/ACES

To supervise the construction of bored tunnel structures in compliance with the requirements of the BCA ACT & Regulation, and to the requirement of the contracts with the client. Lead a team of Resident Technical Officer in the supervision works. Minimum 3 years of supervision experience in civil engineering projects. Underground/tunnelling supervision experience will be an advantage. Registered Resident Engineer by IES/ACES.

Summary

We live in a mobile and device driven world where knowledge of the physical world around us is needed. We rely on this knowledge to get around, to learn about our environment and to enable spectacular new features for custom applications. Apple is meeting those needs as robustly and as creatively as possible and is interested in people who want to help meet that commitment. The success we are striving will be the result of very skilled people working in an environment which cultivates creativity, partnership, and thinking of old problems in new ways. If that sounds like the kind of environment that you find intriguing, then let's talk. These elements come together to make Apple an amazing environment for motivated people to do the greatest work of their lives. You will become part of a team that sets the standard in cultivating excellence, creativity and innovation. Excellent opportunity to join our Process Development team. The successful candidate will have opportunity to conduct feasibility studies, develop new process and material development for new module technologies under research and development. Will you help us design the next generation of revolutionary Apple products?

Description

• Work on process equipment to conduct proof of concept evaluation and DOEs
• Establishment of baseline process and metrics
• Perform process characterisation
• Establish design guidelines for manufacturability
• Define procedures and metrologies
• Generate engineering report base on studies and evaluation
• Reporting of engineering studies to cross-functional team

Minimum Qualifications

• Degree of Science in Engineering or equivalent
• Minimum 15 years of experience in doing process R&D
• Hands-on experience in various module assembly processes such as flip chip, flex attach, pick and place, dispensing, bonding, filling, laser soldering, component cleaning, curing, plating, singulation, wafer bonding.

Preferred Qualifications

• Good knowledge in design of experiment (DOE), engineering statistic, root cause analysis and problem solving
• Familiarity on different metrology tools and quantitative measurement methodology
• Clear and effective written and communication skill
• Resourceful and innovative
• Knowledge and work experience in one or more of the following processes & handling such processes equipment - 1) Flip Chip bonding (Thermosonic, Thermocompression and etc) OR 2) EVO die bonder, EVG and Suss process equipment OR 3) Flex Attach (Flexible Printed Circuit Board Bonding), Solder Jetting/Laser Wire Soldering OR 4) SMT (e.g. solder printing, component pick&place, AOI, SPI and reflow)
• Knowledge on adhesive or epoxy or other bonding material is an advantage
• Experience in optical components, active alignment and high accuracy bonding process is preferred

Responsibilities:

• Carrying out civil & structural design and drafting works within stipulated timeline
• Carrying out authority submissions
• Coordinating with various parties related to the project including liaising with drafters on the deliverables

Requirements:

• Engineers with integrity and positive working attitude
• Min. 5 years experience in consultancy firm
• Being proficient in design and drafting software and able to produce submission drawings.

Working Options:

• Base in Singapore (Work from office/home)

Duties & Responsibilities

• To lead the Engineer team to carry out civil and structural engineering jobs in front end engineering design, detail engineering design.

• To assist discipline Manager in project civil portion manpower.

• To generate project specifications, design philosophy, calculation template to comply with clients’ requirement and local authority’s requirements.

• Civil project team manhour control, schedule control.

• To prepare foundation, structural or hydraulic calculation sheets, from simple to more complicated items, in accordance to project specifications, criteria and information. Ensuring correct and accurate calculations of loads and member sizes of structures. On average, a Civil Engineer II produces three simple foundation calculation designs a day or 1 structural calculation report a week.

• To prepare three-dimensional (3D) models and design drawings for structures and foundations as well as shop fabrication drawings.

• To supply design drawing information and instructions to Designers ensuring technical completeness and clearness of data for effective workflow.

• Usually prepares anchor bolt list and setting bolt list for client’s procurement purposes ensuring at least (+)/(-) 10% safety factor and meeting client requirements.

• Checks own design outputs and reviews design drawings to ensure accuracy and completeness to design requirements and concepts.

• May act as Assistant Key Person for small projects or NIDC projects.

• Coordinates with other Engineers and Designers to facilitate production of civil design and drawing outputs.

• Performs other functions that may be assigned by the Department Manager. Requirements

• Bachelor’s degree in Civil Engineering.

• Minimum of ten (10) years in the field of years plant engineering design and construction experience in Oil & Gas, Refinery, Petrochemical, Chemical, Pharmaceutical and industrial plants and consistent career experience in the engineering department Skill Requirements

• Ability to use computer equipment and peripherals to carry out routine computing tasks.

• Basic knowledge on STAAD, AutoCad and Micro station.

• Possess good communication and technical skills.

• Strong leadership qualities and analytical and reasoning abilities.

• Ability to read, analyzes, and interprets common technical information, contract reports and instructions.