Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description:

• Day-to-day customer service and procurement activities - Responsible for managing daily customer service operations and manage entire supply chain process from procurement to distribution to ensure timely and cost-effective delivery of products.
• Demand planning - Work closely with sales and marketing teams to forecast demand accurately.
• Production Planning - Collaborate with Operations team to develop production schedules and optimize the production planning that align with demand forecasts.
• Inventory Management - Work within the team to implement robust inventory control measures to maintain optimal stock levels. Monitor and analyze inventory turnover, taking proactive measures to prevent shortages or overstock situations.
• Logistics Coordination - Coordinate logistics activities, including transportation, shipping, and customs clearance. Optimize transportation routes and methods to reduce costs and enhance efficiency.
• Relationship Management - Build and maintain strong relationships with local and overseas suppliers and customers. Develop good vendor management with warehouse personnel for effective inventory control.
• Licensing - Manage all license requirements for Import/Export & transportation with compliance to Government Authority of Singapore.
• Collaboration and Communication - Work with product management team to review product specification/technical data. Collaborate with quality control teams to ensure that all products meet industry standards and customer specifications.
• Perform any other ad hoc tasks assigned by Team leader / Management.

Job Requirements:

• Degree in Chemistry / Chemical Engineering or any Engineering field.
• Minimum of 2 Years of working experience in a related field.
• Preferably with related experience in Chemical Distribution/ Semiconductor industries.
• Excellent written and spoken communication skills in English and ideally proficient in Chinese (in order to negotiate and handle queries with overseas Mandarin speaking suppliers/vendors in regards with the import & export shipment arrangement matters).
• Hands on experience using SAP/Navision system, strong in Microsoft Office, especially Excel would be an advantage.
• Experience in ISO9001, ISO14001 and ISO 45001.
• Ability to prioritize workload, make systematic decisions under pressure.
• Possess an entrepreneurial ‘can do’ mindset, able to work in a start-up environment.
• Possess excellent interpersonal skills, strong problem-solving skills and sense of ownership.
• Willing to travel if required.

A Day in Your Life at MKS:

As an Application Engineer , you will partner with Sales and Customers to support FEC process activities and improvement.

You Will Make an Impact By:

• Perform characterization study on new products and document the results in customer presentations for marketing purposes
• Presentation of products capability and performance to management and customers
• Provide on-site new process installations (Beta Site Evaluation) at customers for new products de-veloped
• Provide training to customers and applicators
• Support Functional Electronic Coatings (FEC) business in the Far East by processing samples for customers, evaluations/qualifications and conducting lab scale experiments to troubleshoot cus-tomer problems
• Responsible to ensure the FEC Laboratory cleanliness and maintenance through practicing good housekeeping methods.
• Ensure work time is recorded and uploaded into the SAP platform for all projects completed and in-hand.
• Health, Safety & Environment (HSE) Responsibilities: Safety remains our number 1 priority. Making HSE as an integral part of all activities. The successful candidate must agree to comply with our in-ternal HSE & QS policy and other relevant local regulations.
• Other jobs / tasks assigned by the Application Manager and Business Manager
• Travel Requirements : 30% of travel is required

Skills You Bring:

• Degree in Chemistry or equivalent. Masters or PHD in chemistry can be considered.
• Minimum of 3 years working experience in the related function /industry.
• Good knowledge of electrochemistry and surface finishing technology
• Good command in English.
• Good communication and interpersonal skills.
• Candidate should be proactive, highly motivated, goal-oriented and customer-oriented person
• Good communication skills, resilience, good reporting
• Excellent analytical thinking, able to work under minimum supervision and independently, at the same time a highly committed team player.

Job Responsibilities:

1. Team up with chemists to lead a team of lab analysts and technician in executing daily laboratory operations, ensuring compliance with accreditation standards and quality system implementation.
2. Develop and validate analytical methods for the testing of chemical compounds, ensuring accuracy, precision, and reliability. Identify and drive initiatives to enhance laboratory operational efficiency and productivity.
3. Manage laboratory inventory and equipment, including consumables/spare-parts inventory, equipment calibration, troubleshooting, and maintenance planning, to meet quality and operational requirements consistently, ensuring analytical tools are in proper working condition for accurate testing and analysis.
4. Provide support in new product development processes (R&D), analytical metrology, and quality assurance for all products, offering product expertise, providing technical support for new product developments, and addressing technical emergencies.
5. Collaborate with other departments on continuous improvement projects to achieve business objectives.
6. Perform Quality Control (QC) responsibilities, including conducting quality tests, inspections, and analyses to ensure product integrity and compliance with standards and specifications.
7. Investigate deviations, out-of-specification results, and quality-related issues, and implement corrective and preventive actions (CAPAs) as necessary.
8. As quality master to understand product quality, to ensure product to fulfill customer’s requirement.

Job Requirements:

1. Master's Degree in Chemistry with 2 – 3 years relevant working experience in QC lab or a Bachelor’s Degree in Chemistry with 5 – 6 years relevant working experience.
2. Working experience or significant exposure to specialty chemicals or semiconductor wafer fab supplier environments is considered an added advantage.
3. Strong hands-on instrumentation experience such as ICP/MS, GC/MS, UV-Vis, GC/FID/TCD, IC, HPLC, ICP/OES, NIR, and other measurement tools.
4. Excellent written and spoken communication skills in bilingual languages (English and Mandarin) to liaise with English and Mandarin-speaking associates/clients.
5. Hardworking, able to multi-task, and willing to work long hours when necessary
6. Team player with excellent interpersonal skills and a strong sense of ownership with responsibilities to achieve project and business objective
7. Ability to work under pressure, prioritize workload, be systematic, and make sound decisions in a fast-paced environment.
8. Willingness to travel when required.

Scope of job:

1. Installation and Commissioning:

• Install electrical systems, equipment, and machinery as per technical specifications and safety regulations.
• Assist in the commissioning of electrical systems and ensure they are operating correctly.
• Ensure all installations are in compliance with the relevant codes and standards.

2. Maintenance & Troubleshooting:

• Conduct routine maintenance checks on electrical systems to ensure efficient functioning.
• Diagnose faults, troubleshoot electrical problems, and repair or replace faulty components.
• Provide preventive maintenance to avoid breakdowns and optimize system performance.

3. Customer Support:

• Offer on-site and remote technical support to customers, ensuring customer satisfaction.
• Respond to customer queries and resolve electrical issues promptly.
• Provide training and guidance to customers on proper use and maintenance of electrical systems.

4. System Upgrades:

• Assess and recommend upgrades to existing electrical systems and equipment.
• Implement system improvements to enhance functionality, safety, and efficiency.

5. Safety & Compliance:

• Follow all safety protocols, electrical codes, and regulations to maintain a safe working environment.
• Conduct safety inspections and risk assessments on electrical systems and equipment.
• Ensure compliance with local, national, and industry-specific electrical standards.

6. Documentation & Reporting:

• Maintain accurate records of service activities, including repairs, maintenance, and customer interactions.
• Prepare and submit detailed reports on findings, repairs, and service schedules.
• Maintain an inventory of electrical components and tools.
• Monitor progress on the works carried out and coordinate with customer and shipyard on site during Repair and Commissioning Job.
• Prepare timesheets and service report upon completion of all works and ensure all document is properly endorsed/verified by customer and uploaded to serve on time.

7. Collaboration & Coordination:

• Work closely with project managers, technical teams, and clients to understand service requirements.
• Coordinate with suppliers and vendors for spare parts and service tools.
• Collaborate with colleagues to ensure efficient and effective project execution.

8. Continuous Improvement:

• Stay updated with the latest electrical technologies, techniques, and industry best practices.
• Attend training and certification programs to enhance skills and knowledge.
• Contribute ideas for improving service efficiency and customer satisfaction.

Required Skills & Qualifications:

· Education:

• A bachelor’s degree or equivalent qualification in Electrical Engineering, Electronics, or a related field.
• Certification in electrical systems or maintenance (e.g., NEC, NFPA) is a plus.

· Experience:

• Proven experience as an Electrical Service Engineer or similar role (typically 5 years above).
• Hands-on experience with electrical systems, wiring, motors, circuit boards, and related components.
• Familiarity with diagnostic tools, testing equipment, and electrical schematics.

· Technical Skills:

• Strong knowledge of electrical systems, circuits, and components.
• Proficient in using electrical diagnostic tools, multimeters, and testing devices.
• Understanding of electrical safety regulations and standards.

· Soft Skills:

• Excellent problem-solving and troubleshooting abilities.
• Strong communication skills (both verbal and written).
• Ability to work independently and as part of a team.
• Customer-oriented with a focus on delivering high-quality service.

Physical Requirements:

• Ability to lift and carry heavy electrical components and tools.
• Ability to work in confined spaces or at heights when required.
• Comfortable working in various weather conditions for outdoor jobs.
• Commissioning, start-up, and testing of mechanical, hydraulic, control system and electric integration system on newly build vessel.
• Recommendation of Spare Parts or solutions to customer during Repair or Troubleshoots Works.
• Constant monitoring of the progress and quality on the works carried out and coordinate with customer and shipyard on site during Repair and Commissioning Job.
• Ensure our Equipment’s perform as per requirement and satisfaction of Customer.

Work Environment:

• The role requires travel to client sites for installations, maintenance, and repairs.
• Work hours may vary based on project deadlines or emergency service calls.

Responsibilities:

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and clients’ requirements
• Work closely with the Professional Engineers, regulatory authorities and contractors to provide supervision on site, to resolve all site issues and ensure timely completion of the projects
• Implement the site supervision quality and safety assurance system
• To carry out all inspection that is under KTP’s submission, Including ERSS, and specialist work that will need his supervision, whenever required.

Requirements:

• Degree in Civil Engineering recognised by BCA, Singapore
• Must be an accredited Resident Engineer with IES, Singapore, upon successful hiring
• Fresh graduates / Resident Engineers with other specializations are welcome to apply
• Candidates with HDB experience are an added advantage and strong encouraged to apply

Responsibilities for this position include:

• Broad-based, hands on knowledge and experience with various types of instrument and electrical systems, equipment and software
• Troubleshoot electrical and instrumentation maintenance issues and complete appropriate documentation
• Update and archive electrical prints, PLC programs, and operator interface software, necessary for the documentation of projects that have gone into production
• Update and archive electrical prints, PLC programs, operator interface software, necessary for the documentation of projects that have gone into production
• Design electrical control and communication systems for production equipment
• Coordinate the installation of electrical equipment by contractors and plant personnel to meet scheduled completion dates
• Carry out the effective delivery of electrical, mechanical and fabric maintenance to both plant equipment and building equipment on the Client’s sites

Desired experience for electrical maintenance engineer includes:

• Provide technical support to Maintenance for AC and DC electronic drives, Programmable Logic Controllers, and control systems
• Provide cost estimates for new projects and system upgrades
• Develop specifications for projects to assure completion of work on schedule with required materials and workmanship
• Assist Production and Maintenance in the start-up and operation of new equipment and facilities

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform corrosion monitoring inspection and coordination with NDT team
3. Submit daily and weekly reports to client on the inspection findings.
4. Perform QA/QC welding inspections at site.
5. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc
6. Provide Lead auditor services for various clients at various manufacturing companies.
7. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have Diploma or bachelor degree in engineering
2. Must have valid API 510, API 570 and API 653 Certificate.
3. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1
4. Must have NDT level II certificates in MPI, PT, UT and RT
5. Must have IRCA QMS lead auditor certification.
6. Must be a Saudi Aramco and Singapore welding society approved welding inspector
7. Must have more than 5 years’ work experience in Shell Bukom.
8. Knowledge in code book like AWS, ASME, API codes
9. Must have a good knowledge about MT,PT,UT,RT Methods.
10. Must having an inspection experience in Exchanger,pressure vessels, Pumps, compressors, valves, well head equipment’s, Tanks and Piping.

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 & 14001 processes.
• conducts design reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Project Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• AutoCAD and solid works proficiency
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment
• MS Office proficiency

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Responsibilities:

• Work within the Quality Group and the Package Team and liaise with all project team members, such as Engineering, SCM Document Control and Vendor Inspection Coordinator etc.
• Participate in review Material Data sheets. development and issuance of Material Requisition/ RFQ.
• Understands and ensure quality requirements in built into the RFQs and POs documents as well as all the package specific Quality Requirements.
• Review the Technical Bid documents submitted by vendor
• Engages in the review and response to the Technical Clarification on Quality related issues
• Issues Quality Bid Technical Evaluation report for each Bid Package
• Participates in PO award recommendation
• Interfaces with the Vendor Inspection Coordinator wherever source inspection is required.

Requirements:

• Degree in Mechanical Engineering.
• Minimum of 5 years’ experience in equipment procurement for oil & gas/ offshore industries.
• Possess CompEx certified (Module 11), ISO 9001:2015 Lead Auditor, NORSOK / PED requirement, ASME / ASTM / API codes, DNV-GL codes and standards and basic knowledge of NDT

Our Addresses and Working Hours:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

About Infosys

Infosys is a global leader in nextgeneration digital services and consulting. We enable clients in more than 56 countries to navigate their digital transformation. With over four decades of experience in managing the systems and workings of global enterprises, we expertly steer our clients through their digital journey. We do it by enabling the enterprise with an AI-powered core that helps prioritize the execution of change. We also empower the business with agile digital at scale to deliver unprecedented levels of performance and customer delight. Our always-on learning agenda drives their continuous improvement through building and transferring digital skills, expertise, and ideas from our innovation ecosystem.

Visit www.infosys.com to see how Infosys (NYSE: INFY) can help your enterprise navigate your next.

The Infosys Company Led Training (CLT) is a program in partnership with TeSA, driven by IMDA.

CLT is a structured development program that aims to enable fresh graduates to acquire specialist, expert or mastery-level competencies for jobs in demand by the industry, especially those that support Digital Economy.

If your passion is to build solutions that really make a difference to enterprises, the community and your world, Infosys is the right place for you.

* Selected candidate Singaporean / SPR will be offered a full-time position with training provided.

Roles and Responsibilities:

• Requirements Gathering
• Design
• Architecture
• Development
• Testing
• Implementation
• Warranty
• Transition
• Production Support
• Maintenance
• Knowledge Management

Skills /Competencies:

• Essential: Degree in Computer Sciences or related.
• 0-3 years of working experience.
• Must be a Singapore Citizen / Singapore Permanent Residence
• Preferred Java programming with SQL database experience.

Additional Skills:

• Be able to think logically and a team player.
• Good analytical abilities
• Strong written and verbal communication skills.
• Attention to detail, good analytical and problem-solving skills

At Infosys, we recognize that everyone has individual requirements. If you are a person with disability, illness, or injury and require adjustments to the recruitment and selection process, please contact our Recruitment team for adjustment either via the following email [email protected] or call 1-866-472-0935. Alternatively, you can include your preferred method of communication in email, and someone will be in touch.

Please note in order to protect the interest of all parties involved in the recruitment process, Infosys does not accept any unsolicited resumes from third-party vendors. In the absence of a signed agreement, any submission will be deemed as non-binding and Infosys explicitly reserves the right to pursue and hire the submitted profile. All recruitment activity must be coordinated through the Talent Acquisition department.

“All aspects of employment at Infosys are based on merit, competence and performance. We are committed to embracing diversity and creating an inclusive environment for all employees. Infosys is proud to be an equal opportunity employer.”

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Job Responsibilties:

• Plan and design mechanical engineering works for building services.
• Prepare reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Conduct design presentations, review shop drawings and material/equipment submissions, handle RFIs and other contract administration duties.
• Oversee the installation, testing and commissioning of Mechanical engineering works.

Job Requirements:

• Degree in Mechanical Engineering from a University recognized by the Professional Engineers Board, Singapore.
• Minimum 3-5 years of relevant experience in mechanical engineering design.
• Good working experience in a consulting firm with proven track records in major development projects.
• Knowledge of mechanical engineering design systems software.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.
• Conversant with local codes and regulations, and authority submission procedures.
• A team player, able to work both independently and as a group, ensuring excellent project delivery to Clients and other stakeholders.

Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

• Minimum 8 years of engineering experience with recognised Degree in relevant field
• At least 5 years of supervision experience of E&M work in the construction site for projects of similar scale, complexity and nature of work
• Candidate must have LTA/ MRT/ rail projects background

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

We are looking for Software Engineer (Golang) to join one of the Government agency!

• Exciting opportunity to work with a team of professionals to deliver high quality application
• Great career progression and friendly working environment
• Attractive salary and employment benefits

What you will be working on:

• Mainly responsible for software design and development of web frontend and backend applications
• Write automated functional and unit testing for the code you write
• Develop backend APIs & databases supporting the applications
• Design and develop applications leveraging cloud technologies
• Assist DevOps Engineer on build and release automation
• Work closely with fellow developers in pair programming and code review
• Work closely with Business Analyst, Quality Engineer, User Interface/User Experience Designers

What we are looking for:

• Minimum 4-5 years of software development experience in web applications using Golang
• Experience in Reactjs/Typescript/Nodejs, preferably Golang
• Familiar with JavaScript unit testing frameworks such as Jest or Mocha

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email [email protected].
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Liew Chien Hui (Vivian) - R2090138

ScienTec Consulting Pte Ltd - 11C5781

JOB DESCRIPTION

* Design and develop Mechanical Equipment/Systems, keeping in mind budget, timelines and other essential resources.

* Work with a team of Engineers in the creation of new product designs, ensuring alignment with project objectives and timelines.

* Utilized CAD Software to create 3D Models and details drawings for new product development.

* Implemented design modifications and optimizations to streamlne the assembly process.

* Collaborate with cross functional teams including product management, manufacturing and quality assurance to ensure successful product development and launch.

* Troubleshoot problems and devise solutions to resolve them.

* Research and keep up with the Dynamic Technology and trends in the mechanical design spectrum.

REQUIREMENTS

* Degree in Mechanical Engineering.

* Knowledge in dealing with Engineering Drawings and 3D Modelling.

* Experience working with designing software - Solidworks and Autocad.

* Minimum 5 years of relevant working experience as Mechanical Design Engineer.

* Able to work independently with minimal supervision.

* Strong verbal, written and communicatin skills.

* Sound knowledge of Computer Application and Microsoft Office.

* Willing to work on weekends and travel occassionally if required.

Job Highlights

• Attractive salary package

• Basic Salary + Commission + Vehicle Allowance

• Excellent benefit

• Dynamic working environment

• 1.5 days WFH

Job Description

• Continually meeting or exceeding sales targets by selling company products to new and existing customers.

• Services existing accounts, obtain orders, and establishes new accounts by planning and organising call/visiting on existing or potential sales prospects.

• Establish, develop and maintain positive business and customer relationships.

• Monitor the company’s industry competitors, new products, and market conditions to understand a customer's specific needs.

• Conduct calls and face-to-face meetings with customers daily.

• Developing and implementing an effective sales strategy to drive sales.

Job Requirements:-

- Positive attitude, self-starter

- Have a sense of responsibility

- Adaptable/flexible thinking

- Strong interpersonal skills

- Always team focused

- Processes a class 3 licence with own transport

- Min 2 year experience in industrial / construction / Marine sales

- Experience with hose management is strongly preferred

Working days: Monday – Friday 8:30am – 5:30pm

Saturday 8:30am – 1:00pm (alternate)

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628