*Position Overview:*

We are seeking a skilled and experienced Marine NavCom Service Engineer to join our team. The ideal candidate will have at least 4 years of hands-on experience in the installation, troubleshooting, and servicing of a wide range of marine navigation and communication systems, including but not limited to MARINE RADAR systems, chartplotters, ECDIS, AIS, VDR, VHF radios, MF/HF SSB, autopilots, and maritime IT equipment. Additionally, knowledge in IT/networking and VSAT systems is essential for this role. A General Operator's Certificate (GOC) is recommended. The candidate should also possess a general understanding of marine electrical and electronics systems. Flexibility and a willingness to travel are required for this position.

*Key Responsibilities:*

Install, troubleshoot, and service various marine navigation and communication systems including MARINE RADAR systems, chartplotters, ECDIS, AIS, VDR, VHF radios, MF/HF SSB, autopilots, maritime IT equipment, and VSAT systems.
Conduct regular maintenance checks and inspections on installed systems to ensure optimal performance and compliance with safety regulations.
Diagnose and resolve technical issues efficiently to minimize downtime and ensure the continuous operation of onboard systems.
Provide technical support and guidance to onboard crew members regarding the operation and maintenance of navigation and communication systems.
Collaborate with internal teams and external stakeholders to coordinate installations, upgrades, and repairs as needed.
Keep abreast of industry developments, regulations, and technological advancements in marine navigation and communication systems.
Document all service activities, including installation procedures, troubleshooting steps, and solutions provided, accurately and comprehensively.
Qualifications and Experience:

Bachelor's degree or equivalent in Electrical/Electronics Engineering, Telecommunications, or a related field.
Minimum of 4 years of hands-on experience in the installation, troubleshooting, and servicing of marine navigation and communication systems.
Proficiency in the installation, configuration, and maintenance of MARINE RADAR systems, chartplotters, ECDIS, AIS, VDR, VHF radios, MF/HF SSB, autopilots, maritime IT equipment, and VSAT systems.
Strong knowledge of IT/networking principles and protocols.
General Operator's Certificate (GOC) is recommended.
Familiarity with marine electrical and electronics systems is desirable.
Excellent problem-solving skills and the ability to work efficiently under pressure.
Effective communication and interpersonal skills.
Flexibility and willingness to travel frequently, including assignments at sea or in remote locations.
Commitment to maintaining high standards of safety and compliance with regulatory requirements.
If you meet the above qualifications and are looking to join a dynamic team in the maritime industry, we encourage you to apply for this exciting opportunity.

Job Summary:

We are seeking a highly skilled Marine Structural Analysis Engineer to join our team. The successful candidate will be responsible for performing detailed structural analyses and design evaluations for various marine structures, ensuring safety, reliability, and compliance with industry standards and regulations.

Key Responsibilities:

• Perform structural analysis and design of marine structures including ships, offshore platforms, and subsea installations.
• Utilize advanced finite element analysis (FEA) tools and software to conduct stress, fatigue, and dynamic analyses.
• Develop and validate structural models to simulate and predict performance under various loading conditions.
• Collaborate with multidisciplinary teams to integrate structural analysis results into overall project designs.
• Prepare detailed technical reports, design documentation, and presentations for stakeholders.
• Ensure compliance with relevant industry codes, standards, and regulatory requirements.
• Participate in design reviews, risk assessments, and failure mode analysis.
• Provide technical support during the construction, installation, and operational phases of projects.
• Stay updated with the latest advancements in marine structural engineering and analysis methodologies.

Qualifications:

• Bachelor’s or Master’s degree in Civil Engineering, Structural Engineering, Naval Architecture, or a related field.
• Proven experience in structural analysis and design of marine structures.
• Proficiency in using FEA software such as ANSYS, ABAQUS, or equivalent.
• Strong understanding of marine structural codes and standards (e.g., DNV GL, ABS, ISO).
• Excellent analytical, problem-solving, and decision-making skills.
• Strong communication skills, both written and verbal, with the ability to present complex technical information clearly.
• Ability to work effectively in a team environment and manage multiple projects simultaneously.
• Professional Engineer (PE) license or Chartered Engineer (CEng) status is preferred but not required.

Preferred Skills:

• Experience with structural analysis of offshore wind turbines, oil & gas platforms, and subsea structures and marine vessels.
• Familiarity with software tools such as MATLAB, Python, or other programming languages for custom analysis and automation.
• Knowledge of marine construction techniques and materials.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional development and career advancement.
• A dynamic and collaborative work environment.
• The chance to work on innovative and challenging projects in the marine industry.

The Field Service Engineer is responsible for providing technical expertise and support at customer sites. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.

Department: R&D

Report to: R&D Director

Xnergy is a multi-VC funded and Sovereign-backed power solutions Pre-IPO company, the first in the world in high power universal contactless charging for global electrified mobility. Xnergy was voted a APAC 25 company in 2020 by Cleantech Group.

* The APAC 25 is an annual list of private sustainable innovation companies that have gained the attention of market experts. The 25 companies are regarded as having the potential to make a significant impact in a five-to-ten-year time frame.

Xnergy has a subsidiary company in Suzhou and an office in Boston and Munich. For more information, please visit Xnergy website: www.xnergytech.com.

Description

We are looking for a senior Firmware Engineer with experience in power electronics to join us in Singapore, with opportunities to travel overseas.

In this role, you will be responsible for the design, development and testing of the firmware and embedded control algorithm for Xnergy wireless power and power conversion products. This includes various stages in a product’s life cycle such as concept/ architecture, prototyping, evaluation, production ready firmware, manufacturing, and maintenance.

You will work closely with the R&D team (hardware, firmware, and software engineers) to contribute to power converter design and shape the development of our future product strategies.

You are expected to provide theoretical knowledge and hands on skill in power electronics control and algorithm, firmware architecture, microcontrollers, power management strategies.

Essential Functions/Responsibilities

1. Design and implement control algorithms and embedded firmware for high-power converters based on DSP/MCU using C/C++ programming language and model-based design methodology in line with the applied normative and standards practice.
2. Apply knowledge of CAN, SPI, USB, I2C, RS485, RS232 communication protocols to product development.
3. Plan and execute testing strategy including bench testing, validation testing, unit testing, integration testing, and system level testing.
4. Develop lab test tools, and support development of routine testing methods/systems for production systems.
5. Produce clear documentation for firmware design and test results.
6. Support identification and troubleshooting of discovered field issues, customisation requirements, create solutions, and disseminate knowledge.
7. Contribute to all phases of the firmware development life cycle including requirements analysis, architecture, design, implementation, testing, and release to ensure high quality production code.
8. Work closely with R&D team, field applications, and production teams for specifications, design, prototyping, and fabrication locally and remotely.
9. Contribute in selecting microcontrollers, schematics review, power management strategy, testing, debugging, and troubleshooting of power, digital, and analog circuit.
10. Finding root-cause and solve technical issues during new product development and product improvement as well as in field escalations.
11. Provide technical guidance and support to the software team.
12. Contribute in related technology roadmaps, features development, next generation product.
13. Plan and schedule to meet goals, deliverables, and deadlines.
14. Mentor junior engineers with an emphasis on controls.

Requirements

1. Bachelor’s/Master’s/PhD degree in Electrical/Electronic/Power Electronics Engineering or Computer Science or other related field.
2. Possess minimum 3 years of relevant work experience.
3. Good understanding and strong interests in power electronics, control and stability, topologies (e.g., AC/DC, PFC, DC/DC, DC/AC, LLC and resonant converter), analog/digital circuit.
4. Solid experience with embedded software development, firmware design, real time control and implementation in microcontrollers, DSPs.
5. Good programming skills (C/C++/assembly, python) and familiar with various development platform (microcontrollers, Linux, etc.) and development tools (compilers and debuggers).
6. Strong knowledge in various industrial communication protocol and the implementation (UART, USB, SPI, I2C, RS-485, CAN, CAN-FD, ISO-15118, IEC 61851).
7. Strong practical knowledge on schematics, engineering specs, testing, troubleshooting, debugging, including familiarity with equipment (oscilloscopes, multi-meters, power supplies, etc.).
8. Familiar with good development practices including design and code reviews, testing and regression, revision control, release, and user documentation.
9. Experience with Agile development methods such as Kanban or Scrum.
10. Self-driven, proactive, assertive, organised, disciplined, and able to work in a collaborative, fast-paced, team environment.
11. Good interpersonal skills, analytical skills, written and verbal communication skills in English and Chinese language.
12. Able to work in start-up environment with global, cross-cultural, and cross-functional engagements.

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At Leica Microsystems, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

Shape the Future with Us!

At Leica Microsystems, we have been shaping the future for over 175 years with groundbreaking optical and digital solutions. With a culture rooted in customer focus, innovation, and teamwork, we lead the market in microscopy, imaging, and analysis, unveiling the invisible and empowering our customers to build a better, healthier world.

Joining Leica Microsystems means contributing to scientific discoveries and supporting surgeons in making critical decisions. Our advanced microscopes and AI-based image analysis solutions enable users to gain profound insights into development and engineering challenges. Here, you will work on meaningful projects alongside passionate colleagues, driving progress and pushing the boundaries of what’s possible.

Learn about the Danaher Business System which makes everything possible.

The Senior Quality Engineer, PQE is responsible to ensure the quality of both medical and non-medical products through rigorous inspections, implementation of quality control measures, and identification of areas for improvement. You will address production quality issues, collaborate with cross-functional teams to find root causes, and drive continuous improvement to build high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering or quality assurance, attention to detail, a proactive mindset, and preferably experience in people management.

This position reports to the Senior Manager Quality Assurance and is part of the Production Quality Engineering (PQE) team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Address production quality issues by identifying problems and collaborating with cross-functional teams to develop solutions for overall product quality improvement.
• Utilize statistical tools to identify trends and patterns for enhancing the production process and ensuring quality.
• Investigate and correct root causes of product failures occurring in the field.
• Conduct periodic production audits to ensure compliance with established policies, procedures, and control plans.
• Participate in lean and continuous improvement initiatives, while adhering to company EHS requirements to prevent injuries and maintain safety.

The essential requirements of the job include:

• Bachelor's degree in Mechatronics, Mechanical Engineering, or Electronics.
• At least 5 years of relevant experience in biomedical or medical device manufacturing.
• Proficient in statistical control methods and QMS 9001; familiarity with ISO13485, USFDA QSR/cGMP, and ISO14971 for medical devices is advantageous.
• Computer literate in MS Office and Lotus Notes.
• Strong analytical, problem-solving skills, and knowledge of lean and investigation tools such as 8D and fishbone diagrams, with a solid understanding of engineering principles, theories, and concepts.

Leica Microsystems, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.

Responsibilities:

• Develops and maintains systems using Java, Spring Boot, Angular, Oracle SQL, Power Automate, Power Apps, and Power BI.
• Provides technical support to users.
• Troubleshoots and resolves system issues.
• Participates in business analysis and technical design sessions.
• Ensures compliance with industry regulations.
• Documents system processes and presents progress reports.
• Collaborates with team members and other departments to ensure smooth operations.
• Manages projects as assigned.
• Coaches and mentors team members (for senior positions).

Requirements:

• Minimum of a Bachelor's degree in Computer Science, Information Technology, or a related field (advanced degrees preferred).
• Possesses at least 5 years of experience in system development and support.
• Demonstrates strong technical skills in Java, Spring Boot, Angular, Oracle SQL, Power Automate, Power Apps, and Power BI.
• Exhibits excellent analytical and problem-solving abilities.
• Displays strong communication and interpersonal skills.
• Capable of managing multiple projects and deliverables simultaneously.
• Experienced in one or more full Software Development Life Cycles (SDLCs) for enterprise projects.
• Knowledge of SAP Crystal Reports and Jasper Reports is an added advantage.

Our Addresses and Working Hours:

Seatrium - Pioneer Yard

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

io-consultants is looking to expand its activities in Asia and is searching for Senior Consultants / Principal Consultants for projects to be based in Singapore. The candidate must be a team player, full of drive, articulate, creative and have a can-do attitude.

Responsibilities:

• Industrial engineering and automation consultancy services

• Understanding Clients’ requirements, perform data gathering, data analysis

• Research and develop new processes, operations and logistics concepts and ideas

• Work with Clients on Production and/or Logistics process re-engineering and design

• Perform process and equipment layout design work

• Prepare Systems & Equipment budget, specification, evaluation and selection

• Work with Systems & Equipment Suppliers and other Consultants in project implementation

• Manage given projects within agreed budget and schedules

• Project administration and reporting

• Lead, guide, train and motivate younger consultants

Requirements:

• Good recognised degree in Engineering. Graduate Degree would be a plus

• Good working knowledge in MS-Office (Word, Excel and PowerPoint)

• Very good spoken and written English, communications and presentation skills. Have a lot of self-confidence

• 10 or more years’ working experience, preferably in the any of the following industries: Food & Catering, Healthcare, Pharmaceutical, Logistics and Facility Planning. Consulting experience would be a plus.

• Ability to work in team and/or independently

• Able to travel for short assignments

• Must have initiative and self-learning

• Ability to lead projects and produce quality results

Remuneration:

• Can be discussed, depending on experience, know-how and ability to contribute

• Range (dependent on experience and qualifications): $10,000 - 14,000

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications.
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Electrical or Electro-mechanical engineering, preferably with a focus on motion systems
• At least 7 years of relevant working experience (semicon or similar)
• Knowledge of electric design principles of cabling, connectors, safety systems, electronic racks, PCB design
• User of 3D design tools and schematic drawing tools (e.g. NX, SolidWorks, E-Plan)
• Basic programming skills and ability to debug electrical systems
• Understanding of motion control systems
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing interdependency between electrical, electromechanical and mechanical (sub)systems
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications.
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Mechanical Engineering, preferably with a focus on construction / precision mechanics
• Knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• User of 3D design tools (e.g. NX or SolidWorks)
• User of product lifecycle management systems (e.g. TeamCenter or EPDM)
• Basic knowledge of FEA calculations in the area of mechanical design
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Senior Mechanical Design Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems
• Proficient in stakeholder management (internal and external) to increase effectiveness and efficiency of the team

Job Description & Requirements

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Precision Engineering or equivalent
• Good communication skill
• Has a passion for Engineering
• Occasional overseas travelling is required
• Fresh graduates are welcome to apply

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Job Summary:

• As a Service Engineer, you will play a critical role in maintaining the operational efficiency of our equipment.
• Your expertise will ensure that our services remain top-notch, directly impacting our client satisfaction and operational success.

Key Responsibilities:

• Conduct periodic inspections, repair, service and maintenance of Musasino equipment to ensure reliable operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.

Job Requirements:

• Fresher or related marine engineer experience are welcome.
• A minimum of a Diploma in Engineering (Electrical, Electronics, Mechanical, Mechatronics) or equivalent educational background.
• Ability to work overtime and weekends when required.
• Willingness to travel overseas for an assignment as required.
• Ability to work independently and under pressure, delivering quality results within tight schedules.
• Team player.

Highlights:

• Gross Salary: S$3000 to S$4000/ month
• Working Day: 5 days
• Working Hour: 8am to 5pm
• Overtime paid when working outside of working hours (include Weekend/ Public Holiday)
• Dental and Medical Benefits
• AWS

Job Responsibilties:

• Plan and design mechanical engineering works for building services.
• Prepare reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Conduct design presentations, review shop drawings and material/equipment submissions, handle RFIs and other contract administration duties.
• Oversee the installation, testing and commissioning of Mechanical engineering works.

Job Requirements:

• Degree in Mechanical Engineering from a University recognized by the Professional Engineers Board, Singapore.
• Minimum 3-5 years of relevant experience in mechanical engineering design.
• Good working experience in a consulting firm with proven track records in major development projects.
• Knowledge of mechanical engineering design systems software.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.
• Conversant with local codes and regulations, and authority submission procedures.
• A team player, able to work both independently and as a group, ensuring excellent project delivery to Clients and other stakeholders.

Stork Gears & Services Asia Pte Ltd are an ISP for Rotating equipment from Europe which focuses mainly on Inspections, Repairs, Modifications and Overhaul of Gearboxes for both the Marine and Land based Applications. We have an OEM background, Rademakers, Conrad, Brevo, Kuypers, Jahnel Kesterman, but with an Independent service provider mind-set.

Stork is known for:

• Highly qualified and experienced engineers
• Highly Price competitive vs OEM
• In-house manufacturing critical parts
• On-site reverse engineering

Our service portfolio consists of:

• Diagnostics services
• Onsite services 24/7
• In-house engineering: design of gearboxes,
• Parts manufacturing (Impellors, shafts, gears)
• Custom built
• Workshop repair

Job description: (Field) Service Engineer

Purpose of the job

Responsible for the technical realization of projects, during the disassembly, assembly, inspection and repair, installation and commissioning of equipment, installations and related components.

Characterization

• Performs assignments/projects on the basis of requests from the project manager and project planning.
• Technical lead of the project team consisting of mechanics, (field) service engineers and subcontracted staff.
• Is responsible for maintaining the overview and ensures that the project is executed safely, in a structured manner, with a high quality standard and within planning and budget.
• Projects are performed at client sites (worldwide) or in the workshop. Often under time pressure and in unexpected or hectic circumstances.
• Flexibility: reachable and deployable, also on irregular hours.
• Realizes the most optimal technical solution and report on progress and the (technical) end result to the customer.
• Fulfills a leading role in respect of compliance with safety and environmental instructions, guidelines and policies of Stork and the client.
• Is highly specialized in installation & equipment technology and product knowledge.
• Service—oriented professional.

Tasks/Responsibilities

1. Authorizations

• Independently performing inspections, measurements, repairs, disassembly and assembly of installations, equipment and related components.
• Authorized to operate specialist machines and tools.
• Competent to specialist work based on required training.

2. Execution

• (dis)Assembly, inspection and repair of installations, equipment, related components and connected installations onsite, according to work instructions. Sets priorities on location and specific approach to the work; on site troubleshooting.
• Searches for the technical optimal solution with regard to costs and downtime.
• Responsible for the overview of the progress of the project on-site, ensuring that the project is carried out safely, in a structured manner, with a high quality standard and within planning and budget.
• Communicating the status and progress of the project to the project manager, adequately reporting possible scope changes.
• Self-starting and able to fully prepare, execute and complete the work independently both technically and administratively.
• Can deal very well with tight deadlines and can very well structure work in hectic and/or unexpected circumstances.
• Makes adequate protocols (if necessary) and technical reports.
• Works closely with other relevant departments so that the project can be delivered to the customer in accordance with the scope.
• Monitor and manage technical intellectual property if appropriate.
• Technical assistance and advice to internal and external stakeholders on use, maintenance, repairs, risks and possibly renewal of the installation.

3. Leading the team

• Managing the project team (on-site), ensuring that the project is carried out safely, in the agreed manner, with high quality and within the agreed timeframe.
• Detection of deviations, intervening if a deviation is detected.
• Coaching, supporting and guiding the project team on-site.
• Responsible for timely and adequate internal and external reporting and administration.
• Making and/or supervising correct use of: tools, machines, measuring instruments and other means of production.
• Maintaining equipment in good condition under applicable norms and regulations, timely reporting and/or solving in case of imperfections and malfunctions.
• Proactive in personal development and knowledge sharing within the team and organization.

4. Safety, quality and environment

• Is accountable for safety and quality aspects within the project.
• Meeting and monitoring the correct safety measures for a safe working environment.
• Report safety incidents and / or near misses in accordance with applicable procedure.

5. Others

• Responsible for maintaining contact with the client at an operational level.
• Actively participate in realization of additional work during development and execution of projects, technically assisting the sales department.
• Proactive relationship management; as ambassador encourage clients to purchase more services and / or products.
• Keeps knowledge up to date within his area of expertise (i.e. through keeping track of technological developments and/or professional literature).
• Assists in development of and test new methods, techniques and new services.

Knowledge and Skills

• Relevant technical education, i.e. mechanical engineering
• Relevant technical education; mechanical engineering or related
• Preferably services background
• Possesses required certifications
• Able to read schedules and mechanical engineering drawings
• Use and application of auxiliary tools and measuring instruments
• Fluent in English

Job Description

• Prepare and review the design of the Mechanical Works, such as piping & equipment drawings, calculation and data sheets
• Involve in daily coordination with internal C&S and BIM team to resolve all the clashes, penetration etc
• Develop the work schedule and coordination of the project works to ensure project is on schedule
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of mechanical works
• Handle and resolve all site technical relating matters
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met
• Prepare all relevant checklist for Installation and Testing & Commissioning Works
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules
• Collaborate with internal stakeholders, clients, consultants, vendors and contractors
• Attend to clients’ comments and ensure clients’ approval & acceptance to all Mechanical Works related design, installation and Testing & Commissioning Works

Requirements

• Min degree in Mechanical Engineering
• 5 to 8 years of relevant experience in the construction industry. Working experience in water or wastewater industry will be an advantage
• Familiar with Auto CAD, Mechanical, Structure drawings and Microsoft Office
• Experience in design, installation, testing and commissioning of the mechanical works e.g. pipings, pumps etc
• Experience in Project Execution, Project Coordination, Supervising and Coordination with sub-contractors, consultant, and Client
• Good technical knowledge in understanding the Mechanical System
• Well versed in BIM software i.e. Bentley and Navisworks
• Team player with good interpersonal skills
• Meticulous and analytical with excellent problem-solving skills
• Highly motivated and able to work independently with minimal supervision

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience