Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function / Primary Goals / Objectives:

• Lead site wide implementation of Food Safety initiatives. Consulting with Division Food Safety SME where necessary.
• Drive and implement continuous improvements to enhance quality and food safety in our products in a cost effective manner.
• Develop training materials and conduct training as part of roll out of Food Safety initiatives.
• Monitor and report project milestones. Ensures timely and successful execution of changes.
• Improve Food Safety culture and raise awareness of Food Safety through various initiatives.
• Improve site Hazard Analysis Critical Control Point (HACCP) system.

Major Responsibilities:

• Establish project milestones and ensures tracking for timely completion.
• Training of cross functional team on the new Food Safety initiatives.
• Implement Change Management Tools (example, CLRS) to ensure successful roll out of Food Safety initiatives.
• Drive continuous improvement projects to drive efficiency and cost for the plant.
• Establish Standard Operating Procedures for new Food Safety initiatives.
• Implement improvements to site HACCP and risk assessment.
• Any other duties as assigned by Supervisor.

Requirements:

• Bachelors’ Degree in engineering (chemical / biomedical), manufacturing, industrial management, or a related field.
• Min 3 years of experience in quality project management, preferably in food/pharmaceutical manufacturing industry.
• Good practical knowledge of GMP in food / pharmaceutical manufacturing.
• Good leadership and problem-solving skill.
• Good communication and report writing skill.
• Good project management skill.
• Team player with initiative, drive, good communication skills and a strong command of written English.
• Knowledge in HACCP and risk assessment.
• Knowledge in food engineering and experience in a dairy / nutritional industry would be advantageous.
• Knowledge and experience in driving cultural changes in organization is preferred.

*Kindly note this position is based in Tuas and it is a 12-month contract opportunity.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Job summary:
Experience in marine and oll & gas sector.
Responsible for the assigned customer account, to ensure all product quality, process quality andsystem quality to conform with customers' specifications and internal quality system reauirements

Roles & Responsibilities:
1.To liaise with Customer Quality representatives on all Quality matters.
2.Lead the investigation on all Customer Quality Feedback, Complaints and CAR with internal cross.functional team for comprehensive root cause failure analysis and ensure closure with effectiveimplementation of corrective actions and preventive actions.
3. Monitor product quality performance and generate quality reports; chair monthly product qualityimprovement meetings to reduce the customer reject and field return rate for continual improvement!Identify Quality lmprovement projects and initiatives to drive Customer Satisfaction with Quality.
4.Establish with customer representative and internal team on New Product Quality plans, procedureswork instruction for overall auality control and coordinate implementatilon and maintenance of suchplans, procedures or instructions; conduct quality training/ cross training for QA inspectors.
5.Audit customer fabrication line for compliance to applicable standards and procedures in QMs andEMS

58 RECRUITMENT PTE. LTD. 19C9772 67026282

OMS has built a long-standing commitment to the upstream energy industry as we manufacture and distribute products from facilities and business units around the world. We are an equal opportunity employer and process all employment applications following the relevant regulations in the countries we operate in.

We are now looking for a Product Design Engineer, with strong background in Mechanical Engineering to join the Engineering Team. The individual is responsible to prepare and generate detailed engineering work instructions and procedural specifications, provide technical support to sales function, guide and supervise junior product engineers for day to day work order preparation and perform other assigned duties as and when required. Work scope covers all OMS locations across the region.

Individuals with relevant product design experience in Conductor/Pipe Connectors, Wellhead Systems, Valves, Actuators, Choke, and/or Downhole Systems will be highly considered for this role.

Responsibilities

a) Manage asphalt premix production quality control processes;
b) Conduct regular inspections and testing;
c) Analyse test results and implement corrective actions;
d) Maintain quality control records and documentation;
e) Train production staff on quality control procedures;
f) Collaborate with production and laboratory teams;
g) Develop and implement quality improvement initiatives;
h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:
• Cooperate with employers and follow safety and health procedure;
• Report unsafe acts and incidents;
• Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

• Diploma / Certificate in Asphalt Technology or related fields
• Preferably with relevant experiences
• Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to interpret test results and make informed decisions
• Familiarity with quality management systems (ISO 9001)
• Proficient in Microsoft Office and laboratory software

Education Requirements:

• Bachelor's degree or above in Automation, Control Engineering, Internet of Things (IoT), or related fields.
• Experience in the steel structure industry or similar manufacturing sectors is preferred.

Job Description:

• Develop and optimize automation solutions based on production requirements, and coordinate with teams to deploy automated inventory management systems.
• Design and improve automated steel structure production processes, integrating industry-standard software (e.g., Tekla) with processing equipment to achieve automated cutting, assembly, and welding.
• Maintain existing production lines and propose improvements to minimize manual intervention and increase efficiency.
• Collaborate with teams to ensure seamless integration of automated systems with existing production management systems, and provide training and guidance on new equipment and systems.
• Generating reports outlining new automation ideas, machine and software upkeep best practices, test results.

Key Skill & Competency Requirements:

• Proficiency in sensor principles and applications, with the ability to design and optimize sensor-based monitoring and control systems.
• Proficiency in embedded systems design, including embedded hardware development, microcontroller programming (e.g., ARM, STM32), and real-time operating systems (RTOS).
• Familiar with C# programming.
• Familiar with mainstream automation development tools and software, such as LabVIEW, MATLAB/Simulink, Siemens TIA Portal, and AVEVA System Platform.
• Understanding of industrial automation technologies, including PLC programming, servo control, and industrial robotics.
• Understanding of smart manufacturing technologies (e.g., Industry 4.0, MES systems, IoT devices) and their applications in steel structure manufacturing.

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

PRIMARY FUNCTION:

• Supervise and inspect the installation, modification, testing and operation of instrumentation, controls, components, and systems.
• Function as project development member to install or upgrade equipment. Schedule and obtain project material and manpower.
• Organize/coordinate site calibration program in accordance with policies and procedures.
• Oversee the use and maintenance of measuring instruments.
• Support in the planning of routine maintenance of production equipment.
• Strategize on maintenance, work instruction and methods to create effective preventive maintenance procedures.
• Analyze breakdowns, diagnose faults, and lead time critical equipment repairs. Implement preventive measures to improve machine reliability.
• Work with reliability engineers to improve equipment performance and extend equipment useful life cycle.
• Oversee and control maintenance costs.
• Train and mentor technicians in equipment operating concepts and maintenance techniques.
• Support plant EHS and Quality initiatives and targets.
• Support automation activities including line sustaining operations and troubleshooting.

MAJOR RESPONSIBILITIES:

• Review/approve calibration specifications against product/ process specifications.
• Ensure timely completion of calibration related investigations and develop effective corrective/preventive actions.
• Develop standard operating procedures for instrument calibration and implementing of maintenance programs for operational efficiencies and minimize cost.
• Evaluate root case analysis reports of major equipment and system failure and develop potential solutions.
• Review installations and assembly documentations periodically to ensure compliance with organizational procedures.
• Approve recommended repair works for major equipment and system failures.
• Establish technical guidelines for the calibrations and alignment of robot motors, sensors and encoders.
• Optimize the motion, functions and routes of robots and other equipment and system components.
• Manage vendor service contracts.
• Preparing operation and maintenance budget.
• Any other duties as assigned by supervisor.

REQUIREMENTS:

• Bachelor of Science in Control & Instrumentation/ Electrical/ Chemical/ IT Engineering or related discipline.
• Diploma with at least 5 years of experience are also welcomed.
• 5 years of relevant experience in a pharmaceutical or nutritional manufacturing facility will be highly advantageous.
• Good planning and supervisory skills.
• Strong interpersonal and communication skills.
• Programmable logic controllers (PLC) will be advantageous.
• High in computer literacy.
• Proficiency in trouble shooting and problem solving.
• Ability to lead, motivate and foster professional development within a team.

*Kindly note this position is based in Tuas.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Authorities and Responsibilities

• Act as primary customer contact, and provide technical support and regular update to customers on project development in a timely manner.
• Communicate and co-ordinate with clients and relevant parties pertaining to the technical requirements and engineering aspects of the assigned projects.
• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the project specifications, client's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their project execution.
• Provide expertise and advisory support to enable operations are effectively and responsibly execute, and consistently maintain, quality workmanship and conformance to design and project specifications, and good manufacturing / engineering practices.
• Plan, monitor and control projects from the receipt of orders through to installation / completion at the customer's site. Additionally to review and competently controlled the completion of project within the allocated budgets and schedules.
• Responsible for getting project acceptance by customers.
• Lead the cross-functional project team and work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Participate in the implementation of risk assessment and risk control of medical devices.

Competence Requirements

• Preferred to have NTC / Diploma / Degree in Mechanical / Manufacturing / Precision Engineering or equivalent.
• Preferably with 3 – 6 years of related experience in which 2 years of involvement with project management in a contract manufacturing environment.
• Preference will be given to those who have experience working with multi-discipline project teams in a manufacturing equipment or system integration environment.
• Working knowledge with precision machining / assembly processes is an advantage.
• Able to work effectively with customers according to deadlines and under pressure-filled conditions.
• Should be innovative, independent and motivated.

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Key Result Areas:

1. Manage the quality assurance and control of products and services to meet company and customers’ expectations.

Monitor QA/QC and proper documentation for incoming materials, fabrication, and production for

overseas projects

• Prepare inspection and test plans for façade works (Chart H)

• Prepare documents and procedures for inspection/certification

• Implement schedule to ensure QC Inspectors carry out their duties timely and correctly

• Assign proper checking tools for QC Inspectors

• Identify training opportunities for QC Inspectors to attain qualification and upgrade in their jobs

• Assign work checklist and test plan to QC Inspectors

• Organize and implement QMS and audit, including ISO

• Inspect the proper documentation and filing of QA/QC documents

• Search for source information related to QA/QC matters

2. Ensure the quality of products and services provided by suppliers and vendors

Analyse products and services provided by suppliers and vendors

• Inspect key material supplies such as aluminium, extrusions and glass

• Examine prototypes provided by suppliers and vendors

• Supervise the information of supplies in QA/QC systems and inspection records.

3. Attain high QA/QC in manufacturing and installation processes and methods.

• Analyse manufacturing and installation processes and methods

• Inspect method statement and safety risk assessment

• Check tools, equipment calibration procedures and records

EDUCATIONAL QUALIFICATIONS

•General education/Diploma in QA/QC

RELEVANT EXPERIENCE

• Minimum 5 years of working experience in façade industry with good knowledge in product

specifications, reading drawings, industry standards, design, engineering, fabrication,

installation and quality.

PERSONAL CHARACTERISTICS & BEHAVIOURS

• Meticulous with an eye for details

• Decisive

• Collaborative

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Defines and develops the value proposition to lead the formulation and definition of AI use case objectives and technical requirements based on user needs, an understanding of business value industry requirements and machine learning and statistical models.

Conceptualizes, builds, develops, and enhances a client's analytical models. Determines the right modeling techniques to answer the use case, available structured and unstructured data, cost and timing constraints to solve the large and complex business issues and delivers compelling and clear business focused insights.

Works with large scale computing frameworks, data analysis systems, and modeling environments. Embeds AI and analytic models into enhanced large-scale business processes and operational systems by collaborating with Application Developers and Infrastructure Architects.

As a recognized subject matter expert and authority, applies analytics methods and adds value to problem domains.

Influences a client's strategic decisions by using deep industry expertise and deploying innovative AI solutions in the operational systems.

Education And Experience Required

• PhD degree in Computer Science, Engineering, Mathematics, Physics or related field with 5+ years of relevant experience.
• OR Master´s Degree in these areas and at least 8 years of relevant experience.

Knowledge and Skills

• Extensive knowledge of data science and data engineering methodologies including but not limited to classical regression, machine learning, deep learning, association rules, sequence analysis, cluster analysis, computer vision and natural language processing.
• Extensive knowledge of Python and expertise with deep learning frameworks such as PyTorch and TensorFlow.
• Experience with large scale training and inference, and machine learning pipelines in production systems.
• Knowledge of Generative AI and Large Language Models, including prompting and finetuning techniques.
• Understanding of software engineering methodologies and design patterns, as well as IT enterprise architectures (containers and container orchestrations solutions, cloud solutions).
• Ability to translate business requirements into mathematical models and data science objectives to achieve measurable business outcomes.
• Advanced communication and presentation skills.
• Strong analytical and problem-solving skills.
• Excellent interpersonal skills and effectiveness in working across geographical boundaries.

Business Acumen:

• Relates risks and challenges the customer should expect to encounter with the solution with other client efforts or projects (use of internal knowledge of organization; trusted advisor relationship).
• Develops Architecture Specification deliverables that map customer business requirements into complete information systems (technologies, processes and people) or operational solutions.
• Ability to consistently apply business management and financial concepts, capital investment, financial modeling, and general aspects of business contracts. Use this knowledge to analyze business needs and develop meaningful business recommendations.
• Ability to apply knowledge of how the industry uses IT to address business challenges using, for example, technical standards and infrastructure, cross-industry trends that impact IT investment, industry-specific roadmaps, and IT enablers.
• Ability to perform business process analysis/synthesis using modeling or simulation tools and techniques, such as workflows and diagrams to show interrelationships of multiple processes, tracking instances/characteristics of process elements.

Technical:

• Broad IT industry knowledge with depth in multiple areas.
• Has pulse on future technology or operational trends as they relate to and support customer business directions ("trusted advisor" role).
• Broad knowledge of IT and business standards and best practices and how to apply them appropriately in solutions.
• Expert or Master level of knowledge of multiple technologies or IT disciplines.
• Able to design planning for accessibility, scalability, and availability.

Engagement Delivery:

• Ability to write Statements of Work for large enterprise or global level solutions that span multiple technologies or operational areas.
• Ability to apply program/project management methods and processes to define, plan, cost, resource, track and ensure the accomplishment of targeted goals for large enterprise or global level projects.
• Successfully works on project teams (individual success defined by how the organization works as a team, including resource and skill sharing across the organization).

Opportunity Pursuit:

• Able to play a leadership role in business development activities for large, complex opportunities.
• Lead in identifying, qualifying, and closing large, complex opportunities.
• Positions the company offering against the competition.
• Is able to provide the company with the voice of the account.
• Play key role in preparing proposals and bids for large, complex opportunities.
• Manage internal reviews and contribute to solution governance processes for large, complex opportunities.
• Build rapport and trust with client.
• Demonstrates excellent consultative, solution selling skills.

Leadership:

• Collaborates effectively with the project manager to manage regional and global projects as necessary. For architectures of project scope may include the technical management of customer staff assigned to implementation team.
• Plays a leading role in the AI & Data Science profession at both local and regional level.
• Makes consistent and ongoing high quality contributions (at least 4 per year) to the company knowledge systems that are recognized by the AI & Data Science and Architect professions to represent best practice.
• Makes formal recommendations to improve the level of job satisfaction for other company employees working on the project.
• Can significantly contribute in the development of new company services and modifications to the methodology.
• Leads in development and delivery of training.
• Coaches and mentors junior level individuals within the AI & Data Science and Architect professions.
• Leads in the definition of the company unit's processes, standards, and policies.

Consulting:

• Build and manage long-term, strategic relationships at CEO and CIO level.
• Excellent customer influence and negotiation skills.
• Ability to strategically consider all sides of an issue within the contexts of time, breadth, and range of options.
• Ability to systematically gather, assess and apply critical organizational, technical, operational, and sales/marketing information for business decisions.
• Ability to prepare clear, concise, and persuasive communications for multiple audiences, including demonstrating effective writing and presentation skills, listening actively, and projecting a credible image.
• Ability to articulate technical or operational problems into understandable business terms appropriate for the audience.

Communication:

• Able to design and present high-impact messages to customer's Executive level management.
• Able to use a wide variety of presentation tools to persuasively communicate complex messages to multiple audience levels, including Executive level management.
• Ability to use prepared and create complete original materials to communicate with the customer. Communicates mostly strategic information and some tactical information.
• Has excellent speaking and writing skills with proven capability to represent the company at external customer and industry events.

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities

· To optimize airside equipment selection in order to minimize the cost and enhance winning probability for project tender

· To respond to customers in timely manner on changes in project tender requirement

· To process PO, SO, MSR, etc. into the system

· To enter order to factory with accuracy

· To ensure delivery schedule meets customer’s requirement to align with the sales forecast

· Any other duties as assigned from time to time

· Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements

· Education levels should be Diploma in Engineering or equivalent

· At least 1-2 years of experience in relevant job scopes

· A team player, able to work in a team closely

· Meticulous and has eyes for details with pleasant characteristics

· Good communication skills

Responsibilities:

• To provide engineering support to the Project team from validation phase to project implementation

• To identify type of material and equipment requirement during validation phase.

• To involve in preparation and submission of engineering submittals.

• Programming of devices & creating and programming graphics in accordance with the project requirement.

• To assist in Test and Commissioning of system equipment.

• To assist in preparation and submission of operation and Maintenance Manuals.

• To provide Bill of Quantity for the projects.

• Any other duties as assigned by superior

• Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements:

• Diploma/ Degree in Engineering or Building Control in relevant field

• Min 1-2 years of relevant work experience

• Experience in PLC programming is added advantage

• Experience in handling energy management systems/ HVAC systems/ Chiller Plant systems/ Building Management Systems will be a plus

• Knowledge of IT networking and database programming, Function Block programming, Structured Language Programming or HTML5 programming will be of added advantage

• Knowledge of industrial system protocols like BACnet, Modbus, LONTalk

• Strong customer management and problem solving skills

• Able to work with the team and self-motivated

Project Location: A&A work (South)

Includes night shift work

Job Description:

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and client's requirements.
• Report to C&S QP, works closely with the regulatory authorities and contractors to provide supervision on site, resolve all site issues and ensure timely completion of the projects.
• To be competent in carrying out supervision of structural works by identifying any non-conformity of contractor's works on site. The appointed person must have the strong ability to interpret the drawings and contract documents on works to be carried.
• Appointed person possesses a complete understanding of local requirements especially to comply with BCA's criteria for build-ability and safety assurance system.
• Carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• Manage the site supervisors with respect to C&S engineering works, architectural and M&E engineering works.
• Implement and sustain the site supervision quality & safety assurance system
• Ensure that proper site documentation for on-going works, site meetings, safety records, method statements, shopdrawings, as built submissions, etc are well managed.
• To attend site progress, technical, client-consultant, variation and coordination meetings
• Interpret drawings and contract documents on works to be carried
• Any other task assigned from time to time.
• Estimated commencement of work in February 2025.

Requirements:

• Recognized Degree in Civil/Structural Engineering acceptable for registration with the PE Board, Singapore
• Accredited with IES/ACES with a valid Resident Engineer Practicing Certificate
• Minimum 8 years’ C&S work experience with strong knowledge in construction of building structures.
• Knowledge in BIM and VDC capabilities will have an added advantage.
• A good team player with effective communication skills and able to interact with people at all levels.
• Preferably with experiences in additions and alterations of buildings/Commercial Developments.
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements
• Good supervisory and leadership skills, with experience in leading a team of Resident Technical Officers

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

• Assists the Project Manager in managing and supervising the execution of production works and ensuring the delivery of assigned projects
• Assists the Project Manager in planning and prioritising the order of works and work methodology
• Liaises with the project team to allocate adequate manpower and equipment resources
• Monitors work progress on board vessels and in workshops
• Conducts production meetings between Yard’s subcontractors, supervisor and ship’s staff to clarify work scope, co-ordinate sequence of work, update schedules and other contractual matters, as and when required
• Ensures works are carried out according to the job specifications in terms of quantity, quality and meeting Class/Owner requirements by developing test plans and arranging for inspection and survey for the Superintendents and Classification
• Completes the process of mechanical completion and commissioning scope of work
• Any other associated tasks and responsibilities assigned from time to time

Requirements:

• Bachelor's Degree in Marine Engineering, Shipbuilding, Naval Architecture, Mechanical Engineering or relevant apprenticeship training in a marine trade
• Knowledge of various workshops dealing with specialised works in the industry
• Able to perform scheduled night duties when required
• Attend to vessel’s needs during weekends and public holidays
• Travel within the country or abroad for ship check
• Good knowledge of marine industry skills in any discipline
• Knowledge in Hull,Mechanical, Piping & Electrical will be advantageous
• Good planning,organization, control, problem-solving, interpersonal and communication skills
• Good knowledge of project management software and other planning softwares

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.
We are a growing engineering consulting company based in Singapore, seeking for a fresh graduate to join us as an Engineer – Mechanical (Building Services).

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Perform initial engineering task on the Mechanical services detailed design (including calculations, computer simulations, etc.) for building projects under the supervision of senior engineers.
• Prepare submission to authorities for approval of design
• Attend to project meeting with Client, PM and Consultants from other disciplines
• Attend site project meeting and site inspection, and respond to technical queries
• Liaise with authorities on plans submission and compliance

PRE-REQUISITES

• Degree in Mechanical Engineering discipline
• Able to work independently and exercise initiatives
• Excellent in both written and verbal communication skills
• A team player; Able to interact and work with colleagues and member of other consultants at various level
• Schedule driven and self-motivated

Job Highlights

• Career Development & Opportunities
• Medical Allowance
• AWS, Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s)for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Our company is at the forefront of innovation in financial technology. Our mission is to develop AI-driven strategies that predict market trends.

We're looking for talented individuals to join our newly founded trading team in our Singapore office as Machine Learning Developers with a specialization in predictive finance.

Responsibilities:

• Develop and implement machine learning predictive models.
• Collaborate closely with team members to create data-driven trading strategies and algorithms.
• Conduct research on academic literature.
• Explore various data sources to craft insightful features for machine learning models.
• Continuously improve and monitor the performance of the ML models.
• Stay up-to-date with the latest trends in machine learning.

Qualifications:

• Bachelor’s, Master’s, or Ph.D. in Computer Science, Mathematics, or a related field.
• Experience: 5+ years of experience in machine learning.
• Technical Skills: Proficient in Python, R, TensorFlow, PyTorch, or similar machine learning frameworks.
• Financial Acumen: Interest in financial markets, trading, and economics. A deep understanding of these subjects is strongly preferred but not required.
• Problem-Solving: Outstanding problem-solving skills with the ability to apply machine learning techniques to complex market data.
• Communication: Strong verbal and written communication skills to work effectively within our collaborative team.

Preferred Qualifications:

• Experience with time-series analysis and forecasting.
• Knowledge of the financial industry and experience working with big data.
• Independent research experience.

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities

· Responsible for providing preventive maintenance service for BMS (Building Management System)

· Carry out troubling shooting, analyzing and rectification of the system on time

· Support client with system operation and recommendation for improvement

· Data analyzing and determination of the system operation status

· Response client’s request and attend the issue in short notice

· Supervise subcontractor to carry out the work safely

· Provide the assistance to colleague and mentoring actively

· Ensure all works carried out in accordance with the specified quality and EHS standards

· Prepare and submit quotations, including material, labor, and scope of works

· Perform replacement/repair, fit out works/A&A for existing BMS site

· Perform weekly standby on rotation schedule

· Perform calibration and verification of BMS sensors annually

· Provide sales support BMS service and site survey

Requirements

· Diploma/ Degree from a recognized technical institute

· Hands on experience in BMS Control System

· Hands on experience in programming languages and logic gates

· Familiar with digital fundamental

· Knowledge on basic networking

· Strong customer management & problem solving skills

· Excellent communication & presentation skills

· Skilled in the use of MS office

· Knowledge on ACMV system

Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsibilities

• Responsible for developing all electrical, controls, instrumentation documents and specification for the project.
• To carry out electrical, controls and instrumentation related detailed design and preparation of drawings and datasheets
• To interpret and interface with other engineering discipline documents like P&ID, GA, client control and instrumentation systems
• To check and review all electrical, controls, instrumentation related drawings and documents from suppliers and vendors.
• To liaise with clients, consultants, sub-contractors and OEM to resolve technical issue at site and in office.
• To interface with engineers of other disciplines within the engineering department.
• To prepare procurement support including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new projects such as preliminary design, material and cost estimates etc.
• To provide technical support to project team for on-going projects and resolve any technical issue on site.

Job Requirements

• Degree or Diploma in Controls, Electronics and Electrical Engineering.
• 3 years relevant experience required for Senior position
• Knowledge of SCADA, PLC and other instrumentation systems will be an advantageous
• Experience in design and drafting of LV and HV systems.
• Familiar with Electrical Installation works and international electrical codes and standards.
• Knowledge in MS, Autocad, Programming languages will be advantageous
• Strong analytical, communication and presentation skills.
• A self-motivated team player with a high level of creativity and initiative.
• Willing to travel occasionally.
• Able to work independently in a flexible, dynamic and fast-paced environment.

What a System Interaction Engineer does at HP:

• Partner with the R&D, NPI and Manufacturing teams for both Supplies and Printer organizations to deliver on program deliverables.
• Define and design System Interaction testing to evaluate product performance and programs intent of meeting or exceeding customer experience.
• Collaborate with Supplies Quality team to analyze defects, understand root cause and define solutions to improve product quality.
• Automate and digitize current Test Flow for better efficiency and effectiveness.

Individuals who do well in this role at HP, usually possess:

• Bachelor's or master’s degree in Mechanical Engineering, Manufacturing Engineering, Electronic and Electrical Engineering, or equivalent.
• Typically, 0-1 years’ experience.
• Software development, python coding and RPA experience.
• Strong technical engineering leadership and capabilities.
• Effective leadership on planning, execution, and issue resolution.
• Demonstrated analytical and empirical problem-solving skills.
• Demonstrates growth mindset hallmark.
• System thinker, looking for connections, and comfortable with things being dynamic.
• Good flexibility and adaptability are key.
• Possesses strong teamwork and ability to collaborate with cross function teams.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.