Job Position:- Resident Engineer (M&E)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Mechanical or Electrical Engineering or equivalent.
• Possess at least 8 years of relevant and practical experience on site;

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local mechanical & electrical codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

Job Description:
We are looking for a skilled and innovative AI System Hardware Engineer to join our team. In this role, you will take ownership of the full hardware R&D process, drive innovation, and ensure high-quality deliverables. If you’re passionate about cutting-edge hardware design and enjoy tackling complex challenges, we’d love to hear from you.

Key Responsibilities:

Lead the entire hardware R&D process, including:

• ASIC bring-up
• Developing hardware design schemes
• Selecting components
• Designing schematics and inspecting PCBs
• Conducting testing, debugging, and ensuring successful mass production
• Design innovative hardware solutions that enhance product functionality, performance, cost efficiency, and quality.

Qualifications:

• Education:Bachelor’s degree or higher in Computer Science, Electronics Engineering, or a related field.
• Technical Skills:Strong understanding of high-speed signal integrity and power distribution techniques.
  Familiarity with modern processors, including GPUs, FPGAs, and X86 architecture.
• Experience:Proven experience with ASIC bring-up and hardware validation.
  Proficient in using testing tools such as power sources, loads, and oscilloscopes.
• Tools:Expertise in hardware design software such as Cadence, Allegro, or similar tools.
  

Responsibilities:

· Project management involving Sanitary, Plumbing & Gas Services

· Documentation of method statement and work procedures

· Review and monitor site construction activities programme to ensure work completion as scheduled

· Evaluation, Cost estimation & analysis for Sanitary, Plumbing & Gas Services

· Preparation of design construction drawings

· Liaison with all parties involved in the project including Local Authorities, Consultants, Architects, Main contractor, Sub-contractors & Suppliers

· Attend site meetings and inspections.

Requirements

· Degree / Diploma in Mechanical or related discipline

· Knowledge of tender costing with experience in evaluation and cost estimation for Sanitary, Plumbing & Gas Services will be an added advantage

· 3 years working experiences in similar position with relevant design and installation knowledge preferred but fresh graduate may apply

· Excellent interpersonal communication skill, innovative and result oriented

· Ability to work independently in a challenging and demanding environment

BROAD FUNCTION

A dedicated and proactive IT Support Engineer with a strong foundation in supporting environments primarily consisting of Windows devices and the Microsoft 365 suite.

Manage IT assets and responsible for troubleshooting/repair, providing technical support, and ensuring seamless end-user IT operations.

Effectively support the organization's IT needs, contribute to a positive user experience, and grow within the role.

ROLES AND RESPONSIBILITIES

• Provide Technical Support: Ensure timely and effective resolution of technical issues related to windows devices and Microsoft 365 applications, minimizing downtime and maintaining productivity.
• Enhance User Experience: Deliver high-quality customer service and support to end-users, ensuring their IT needs are met and they are satisfied with the solutions provided.
• Maintain IT Infrastructure: Assist in the maintenance and optimization of the IT infrastructure, including performing routine updates, backups, and system monitoring to ensure smooth operations.
• Support IT Projects: Contribute to various IT projects and initiatives, providing support and collaborating with the IT team to achieve project goals and improve IT services.
• Develop Technical Skills: Continuously learn and develop technical skills to stay updated with the latest technologies and best practices, enhancing the overall capability of the IT support team.
• Documentation and Reporting: Create and maintain detailed documentation of IT processes, procedures, and troubleshooting steps, ensuring knowledge is shared and easily accessible within the team.
• User Training and Education: Conduct training sessions and create user guides to help end-users effectively utilize Windows devices and Microsoft 365 applications, promoting best practices and reducing common issues.
• On Rotating Roster: Provide standby support during off-office hours and weekend on a rotational basis.
• Ad-Hoc Assignments: carry out any other tasks assigned by the Supervisor or Reporting Officer.

EXPERIENCE

• Technical Support: Provided first-level support to users, resolving issues related to Windows devices and Microsoft 365 applications. Assisted in setting up new workstations and configuring user accounts.
• Incident Management: Logged and tracked support tickets using IT service management tools. Ensured timely resolution of incidents and escalated complex issues to senior engineers when necessary.
• System Maintenance: Performed routine maintenance tasks such as software updates, system backups, and virus scans. Monitored system performance and implemented necessary optimizations.
• User Training: Conducted training sessions for end-users on best practices for using Windows devices and Microsoft 365 applications. Created user guides and FAQs to assist with common issues.
• Collaboration: Worked closely with the IT team to support various projects and initiatives. Participated in team meetings and contributed to the continuous improvement of IT services.

SKILLS

• Technical Support: Proficient in diagnosing and resolving hardware and software issues on Windows devices. Experienced in providing remote and on-site support to end-users.
• Microsoft 365: Skilled in managing and troubleshooting Microsoft 365 applications, including Outlook, Teams, OneDrive, and SharePoint. Familiar with user account management and license allocation.
• Windows OS: Strong understanding of Windows operating systems (Windows 10/11), including installation, configuration, and maintenance. Knowledgeable in Active Directory for user and group management.
• Networking: Basic knowledge of networking concepts such as TCP/IP, DNS, DHCP, and VPN. Capable of troubleshooting connectivity issues.
• Customer Service: Excellent communication and interpersonal skills, with a focus on delivering high-quality support and ensuring user satisfaction.
• Documentation: Ability to create and maintain detailed documentation of IT processes, procedures, and troubleshooting steps.

QUALIFICATIONS

• Diploma or Bachelor's Degree in IT with minimally 3-5 years of relevant experience.
• With relevant certifications such as CompTIA A+, Microsoft Certified: Modern Desktop Administrator Associate, Azure Fundamentals, CCNA, or equivalent will be an advantage.

As an Associate Engineer in Product Support Organization, within the Aftermarket Products & Services (APS) Business Unit, this role is responsible for the technical activities that support the repair and refurbishment of goods. This includes the completion of the quality of goods meeting schedule timelines.

The Associate Engineer ensures smooth repair and refurbishment of goods:

• Repair and refurbishment support: Ensure assemble of goods with accuracy
• On time delivery: completion of work order within the scheduled time frame

Responsibilities

• Create repair and/or refurbishment work orders.
• Expedite support and coordinate the replenishing of materials and work with materials planners to proactively solve raw material issues.
• Ensure materials are issued correctly as per work order.
• Perform Troubleshooting and Diagnostic based on Troubleshooting Guide
• Perform bonding and data collection based on Standard Work Instruction and Test Procedures (~2 - 4 hours standing and using microscope)
• Disassembly, assembly and Testing of Mechatronics Assemblies module to Standard Work Instruction and Test Procedures.
• Update system records in a timely upon completion.
• Support Agility Training to all Product Lines based on Supervisor’s assignment.
• Performs other duties as assigned.

Qualification

• Minimum qualification of Vocational Certificate/NITEC in Electrical or Mechanical Engineering
• Minimum experience of 2 years in the semiconductor/ manufacturing industry
• Basic knowledge of wire bonding and/or die bonding technology is preferred
• Able to work independently to troubleshoot and analyze machines and spares issues when needed
• Possess good written and communication skills
• Proficient in Microsoft Office (Excel, PowerPoint and Words)

Company Overview

Founded in 1951, Kulicke and Soffa Industries, Inc. (NASDAQ: KLIC) specialize in developing cutting-edge semiconductor and electronics assembly solutions enabling a smarter and more sustainable future. Ever-growing range of products and services supports growth and facilitates technology transitions across large-scale markets.

Please refer to the website for more details: www.kns.com.

Equal Opportunity

Kulicke & Soffa recruits on the basis of merit (such as skills, experience or ability to perform the job), regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

We are looking for Service Engineer (PLC) to make an impact!

The Role:

As a Services Engineer, you will work within the Services operations team in Singapore and you will be responsible to support any job assign to you to ensure customer satisfaction with Schneider products and its services.

What will you do?

• Perform field service (customer site service) activities involving the installation supervision, commissioning, maintaining, modification, onsite training, system upgrade and repair of Schneider PLC.
• Responsible for a region or subgroup of field services.
• Performs installation supervision and commissioning of Schneider products including day to day service of the same.
• Performs maintenance for Schneider PLC.
• Trains customers on equipment operation and maintenance of Schneider PLC Product.
• Represents Schneider dealing with customer concerns.
• Responsible for identifying and reporting failure modes encountered when in the field. Also responsible for determining the cause of these failures.
• Solve Site problems at customers site and provides reports on these issues.
• Providing 24hrs telephone support for customers.
• Acquisition of Customer Service products.
• Support internal for spare parts warranty, preparation and assembly.
• Improve on site report and process.

What qualifications will make you successful?

• Min Diploma / Degree in Electrical & Electronics Engineering
• Min 3-5 yrs exp. in Oil & Gas sector, Power Generation, Petrochemical technical experience is an added advantage.
• Has experience and skilled in PLC. Technical knowledge of MV and LV equipment will be an added advantage.
• Willing to travel up to 80% within Region.
• Has teamwork and is customer oriented.
• Has good time management and able to work under pressure.
• Excellent verbal and written communication skills in English are essential.
• Ability to interface with all functional areas of the company.
• Skilled in Microsoft Office – Excel, Word and Power Point.

What’s in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership
• …and more!

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

Job Position:- Resident Engineer (C&S)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Civil or Structural Engineering or equivalent.
• Registered as Resident Engineer with BCA/IES/ACES.
• 3 to 10 years of relevant site supervision experience as a resident engineer.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

As a global leader in power and thermal management solutions, Delta Electronics was founded in 1971 and is headquartered in Taipei, Taiwan with annual revenue exceeding $13 billion. Our wide range of products and solutions cover power supplies, energy management systems, display solutions, and industrial automation products.

We are known for our focus on innovation, sustainability, and energy efficiency. Active investment in research & development, and implementation of cutting-edge technologies ensures our business drives positive environmental impact.

Looking forward to having you join our 85,000 colleagues in building a Smarter and Greener future, Together!

Position Overview:

As a Datacenter Infrastructure Field Application Engineer or Presales Engineer, you will be responsible for supporting and driving the sales of solutions within the datacenter infrastructure field. In this role, you will work closely with customers, sales teams, and other technical personnel to ensure the successful deployment and integration of CDU/Cooling systems in datacenter environments.

Key Responsibilities:

• Expertise in CDU/Cooling Solutions: Possess in-depth knowledge of Data Center products, solutions, and services, keeping up-to-date with industry trends and technological advancements related to datacenter infrastructure.
• Sales Support: Collaborate with the sales team to participate in customer meetings and presentations, understanding customer needs, and proposing appropriate solutions.
• Technical Consultation: Engage in technical discussions with customers to understand their datacenter infrastructure requirements and propose tailored solutions.
• Solution Design and Proposal: Create detailed technical proposals and designs that address customer requirements, including system configurations, power distribution, backup options, and monitoring capabilities.
• Project Management: Collaborate with project managers, engineers, and installation teams to ensure the successful implementation and commissioning of systems in datacenter environments. Provide technical guidance and coordinate tasks throughout the project lifecycle.
• Demonstration and Training: Conduct technical demonstrations and training sessions for customers and sales teams to showcase the capabilities and benefits of solutions.
• Customer Relationship Management: Build and maintain strong relationships with customers, addressing their technical queries, providing post-sales support, and proactively identifying opportunities for additional solutions and services.
• Industry Expertise: Stay updated with the latest industry standards, regulations, and best practices related to datacenter infrastructure, power distribution, and systems.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering, Computer Science, or a related technical field is preferred.
• Experience: Prior experience as a Field Application Engineer, Presales Engineer, or a similar role within the datacenter infrastructure industry, with a focus on CDU/Cooling solutions and power management. Experience in supporting sales teams and customers is highly desirable.
• Communication Skills: Excellent verbal and written communication skills to effectively convey technical concepts and solutions to customers and internal stakeholders. Ability to deliver compelling presentations and demonstrations.
• Problem-solving Skills: Strong analytical and problem-solving abilities to identify customer requirements, propose effective solutions, and troubleshoot technical issues.
• Project Management: Familiarity with project management methodologies and tools to manage multiple projects simultaneously, ensuring timely delivery and customer satisfaction.
• Customer Focus: Demonstrated ability to understand customer needs and offer suitable solutions. Strong customer service orientation and ability to foster long-term customer relationships.

My client is a leading consulting company in the Lifesciences industry and works with big pharma players in the market for different engineering projects. Being in the consultancy business for over 10 years, one of the area they truly invest in is training and growing your career development.

My client believes in digital transformation and will be looking to hire talents with the following diciplines

Computer System Validation CSV Engineer

- Perform risk assessment and validation on CSV systems

- Execute validation protocols (IQ, OQ, PQ) and prepare detailed documentation

Laboratory Instruments/ Equipment Engineer

- Execute qualification protocols for lab equipments (HPLC, GC)

- Troubleshoot and resolve issues with lab equipments

CQV (Commissioning, Qualification and Validation)

- Manage and optimise HVAC systems, utilities and overall facilities infrastructure

- Oversee any facility upgrades and maintenance schedules

To be successful you should have

- Degree in Engineering/ Lifesciences or a related discipline

- Proven experience of at least 2 years in this filed

- Familiar with industry standards, regulations such as GxP, ISO, FDA, EMA)

Interested applicants, please send your profile to [email protected]

Gina Yeo

Life Sciences Consultant/ Head

CEI: R1660520 | Licence No: 19C9622 |

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Design, develop, prototype, integrate and test advanced robotic mechatronic system and sub-system (sensing, manipulation, control, human-interaction, etc…)
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including proprietary robots
• Providing hands-on on-site support for mechatronic system development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable mechatronic sub-systems to be integrated into various AMR platforms
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Troubleshooting of robotic system / subsystem / module using development tools, specialized equipment and standard lab equipment
• Adopting latest standards and/or methodology to work (standards, open source, common platform)

Requirements:

• Degree/Masters in Mechatronics or Electronics Engineering or equivalent
• 4-6 years of relevant experience in mechatronic system design, development, and integration
• Passionate in robotic manipulation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in mechatronics CAD design tools such as Altium, PADS, AutoCAD or similar
• Balanced skills and experiences in mechanical design, basic electrical circuitry and microcontroller programming
• Proficient in programming languages such as Python and C++, and/or other languages
• Hands on experience in commissioning of industrial robots/mobile robots/mobile manipulator
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player
• Strong in written and verbal communication in English

Responsibilities:

• Design, develop, and test electronic circuits for embedded systems.
• Develop and debug embedded software using C/C++ or other relevant programming languages.
• Implement software solutions and design interfaces to support robot integrations
• Perform circuit simulations and PCB layout design.
• Optimize power consumption, performance, and reliability of embedded systems.
• Collaborate with cross-functional teams to define system requirements and specifications.
• Conduct design reviews, testing, and validation of hardware and software.
• Provide technical support and troubleshooting for product development and production teams.
• Assist robot field testing, evaluate the performance of our systems, and create performance reports.
• Contribute to overall architecture design and documentation.

Requirements:

Technical qualifications:

• Background in Computer Science/Electrical Engineering/Mechanical Engineering with focus in robotics, mechatronics, or related fields
• Proficient in ROS or C++ or Python and embedded programming
• Strong knowledge of robotic platforms, robotics hardware (sensors, actuators), and networks (Ethernet, Ethercat, CAN, Modbus, RS232, etc)
• Experience in circuit design, PCB layout, and debugging using tools like oscilloscopes, logic analyzers, and multimeters.
• Familiar with Linux platform, its configuration, and command line operations

Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Job role:

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 3 years of work experience in the digital backend design field.

3. Hands-on project experience is required.

4. Tapeout experience at advanced technology is prefered.

5. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Responsibilities

• To ensure smooth operation of site activities.
• To Provide logistical support (site utilisation) when needed, as requested by sub-contractors.
• To be the liaison for the coordination of different trades within the same discipline.
• Responsible for all on-site engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients queries to ensure timely work arrangements.
• Involve in day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule

Qualifications

• Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification.
• Experience/Knowledge in structural steel works/ precast RC works/ Building/ MRT/ LTA is an advantage
• More than 8-years of site experience in Construction sector.
• Good team player and able to work independently
• BCSS Certificate
• Interested applicants are required to submit their detailed CV and state their current and expected salary.

Lead Mechanical Engineering

Mechanics- CRAFTMANSHIP - Project execution - COOPERATION

The Most Desired Audio Brand

At Bang & Olufsen, we strive to be the most desired audio brand in the world. For more than 95 years, we’ve developed products that change moods, inspire minds, and instill pride in all of us. We are passionate innovators, using our deep knowledge and collaboration skills to solve and simplify complex challenges every day, each of us driven by the profound effect sound can have on the mind. We welcome others that share our passion.

Join us to use your mechanical expertise to create the next iconic wearable Bang and Olufsen product. Here you get to participate in project teams where you in unison with expert colleagues and Partners, drive mechanical architecture and engineering.

Your mission

As our new mechanical engineer for wearable products, you will join our Project development department as part of the global Mechanical engineering team. Here you will drive NPI projects as Sr. Lead mechanical engineer and expert for earphone & headphone program.

Working alongside concept creators, hardware and acoustics specialists, you will create new and exciting products based on Concept and Business briefs. Joining various project teams, you will:

• Acting as lead for the mechanical design creation process, throughout complete NPI phase.
• Master concept and architecture engineering, providing mechanical engineering and knowhow.
• Make assessments and recommendations e.g., on material and process choices based on mechanical design principles, supporting design for perfection, longevity and magical elements.
• Create mechanical constructions and make proof of concept by rapid prototyping & simulations.
• Cooperate with suppliers for exploration and product development, transforming proven concept and architecture into product requirements.
• Work closely with Quality organization and Partners to ensure product and process validation.

Your network

You will become a part of the global mechanical team. We are a very dynamic team that approach our tasks with vigor and technical curiosity as we are all proud engineers loving our products and exist to create amazing products.

We are an experienced team, and you bring a lot of experience and join a very inspiring environment. Here you will have room to grow and the opportunity to bring your ideas and passion for mechanical design and development into play.

Your location

You will be working out from our office in Singapore. Working closely with your colleagues in a global setting and suppliers in Europe, China and other parts of Asia, you should also expect there to be some travel activity.

Education & Experiences

A passion for mechanical engineering & creation. You have a well-founded and deep understanding of mechanical architecture, design, manufacturing processes and material characteristics. Experiences of leading suppliers and have the capability to transform proven architecture into product requirements.

Moreover, you bring:

• Degree or master’s in mechanical design, Engineering
• 10+ years of experiences in R&D or product development
• Design experiences in audio, wearable products, hearing aids devices an advantage
• 3D CAD design SW such as Creo Parametric
• Capable of Architecture design with good understand of GD&T, simulation
• An understanding of the different tooling processes for different material such as plastic, silicon, aluminium, steel, glass and wood
• An open mind, technical curiosity, and attention to detail
• Good communication skills in English. Fluent in Mandarin a plus.

Ready to join the most desired audio brand in the world?

Then send your CV and application by pressing the apply bottom above. Applications are assessed continuously, so please apply as soon as possible and no later than 31st January 2025.

Read more about our recruitment process and explore your career opportunities within Bang & Olufsen, https://www.bang-olufsen.com/en/corporate/careers

You will be at the core team of Delta Research Center leading disruptive technological advancement with strong business value that empower company’s new business in intelligence machines, robotics and automation. As a research engineer, you will collaborate with technical experts to develop state-of-the-art mobile robot products / solution. You will play a key role in continuously improving existing and new products /technology, as well as be part of a dynamic and growing ecosystem in this field. You will manage and execute research programs and projects – particularly in the domain of robotic manipulation that develop and deliver impactful research and business outcomes.

Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Design system architecture, design and write software for robotic systems, sub-systems or modules in a continuous integration and continuous deployment (CI/CD) environment
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including proprietary robots
• Providing hands-on on-site support for software development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable software packages
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Adopting latest standards and/or methodology to work (Agile, standards, open source, common platform)

Requirements:

• Degree/Masters in Electronics, Computing, Mechatronics Engineering or equivalent
• 4-6 years relevant experience in robotics software design, development and integration
• Passionate in robotic navigation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in programming languages such as Python and C++, and/or other languages
• Proficient in robot programming using Robot Operating System (ROS) and Linux environment
• Proficient in software development in as AGILE and collaborative environment using CI/CD tools and able to break down robotic software development into smaller tasks
• Experience in one or more of the following domains will be preferred: Localisation, Mapping, Navigation, Machine Vision, Path Planning, Motion Planning, and/or Mission Planning
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

Job Descriptions:

1. Develop and provide business solutions for SME, Enterprise, and various industry verticals using cloud technologies, participate in test-plan development, integration, and deployment.
2. You will be working with our Cloud Consulting & Sales team to evaluate the requirements and determine actionable tasks, estimates and provide efforts for business solution build and architecture in cloud-based technologies including Application & Infrastructure modernisation, APIs, BigQuery, AI/Machine Learning solutions (Dialogflow, AutoML, Tensorflow etc.).
3. Development of a proof of concept (POC) for business solutions.
4. Responsible for technical documentation on solution implementation.
5. Perform operational readiness tasks and ensure production acceptance criteria are met.
6. Respond to platform technical issues in a professional and timely manner.
7. We are looking for candidates with high-value personal qualities – critical thinking and problem-solving skills, willing to learn, agile and adaptable to changes on the go, with a resilient and can-do attitude.

Requirements:

1. Background in any programming languages, preferably Python/Javascript or NodeJS.

Job Description:

• Drive the overall Company’s Quality Assurance and Quality Control functions and programmes
• Support the Project Management and QAQC teams in the development and implementation of Project Quality Plans (PQP)/CONQUAS/Quality Mark/Quality Management plans
• Ensure strict compliance with various Contractual QAQC Requirements conforming to Project requirements
• Oversee the renewal audits & surveillance certification audits of existing ISO 9001 certifications to the latest versions
• Act as main liaison party with external certifying body on all ISO certifications related to Quality
• Oversee the continuous operations of the In house Academy with HR department to upskill and train all employees internally through in-house courses/training
• Conduct site-based Quality-related training to promote quality culture, better knowledge and awareness among project site staff

Requirement:

• Possess a recognized Engineering Degree with certification and equivalent
• Preferably BCA CONQUAS / QM manager certification , Internal ISO 9001 Auditor certification is a plus point
• Min 5 years experience as QA/QC role
• Expereienced in BCA CONQUAS / Quality Mark Assessments is a plus point
• Positive working attitude and can starts within short notice period