You will work in the Environmental Health Institute, and be a key member of the Facility & Safety Management Section, overseeing facility support and safety management across multiple locations (Biopolis,Techplace II and Van Kleef Centre). This role encompasses a wide range of infrastructure and built environment responsibilities, making it ideal for engineers looking to apply their expertise in a dynamic research setting.

This job might be for you if you possess the following qualities:

• Lead strategic planning and coordination for establishing and maintaining specialised laboratories, ensuring alignment with organisational objectives and timelines.
• Develop and manage comprehensive project budgets, oversee financial planning, cost control, and resource allocation for laboratory establishment and maintenance projects.
• Create detailed project plans for laboratory establishment and maintenance, including scope definition, objectives, timelines, and resource requirements.
• Conduct cost-benefit analyses for proposed projects and initiatives, ensuring efficient use of resources and alignment with budgetary constraints.
• Oversee the design, installation, and maintenance of critical infrastructure systems, with a focus on Air Conditioning and Mechanical Ventilation (ACMV), and specialised laboratory equipment.
• Manage building automation systems to enhance facility performance and user comfort.
• Implement and oversee quality assurance processes to ensure specialised laboratories meet stringent quality standards and regulatory requirements.
• Identify potential risks associated with laboratory operations and develop robust mitigation strategies for safe handling of hazardous materials.
• Develop and implement sustainability initiatives across facilities, integrating innovative engineering solutions to optimise building performance and energy efficiency.
• Monitor and report on environmental performance metrics, including energy consumption and waste generation.
• Facilitate effective communication with stakeholders, including researchers, consultants, contractors, equipment suppliers, and regulatory authorities.
• Participate in corporate projects and perform administrative tasks as assigned.

Job Requirements:

• Degree in Mechanical Engineering. Candidates with degrees in other engineering disciplines (e.g., Electrical, Civil, or Environmental Engineering) with relevant experience will also be considered.
• Experience in facility infrastructure management, particularly in specialised laboratory or research environments.
• Expertise in designing and managing ACMV systems, and other critical building systems.
• Strong background in project management, particularly in complex built environments.
• Thorough understanding of regulatory requirements for specialised laboratories, including safety protocols for handling hazardous biological and chemical materials.
• Experience with Government Procurement practices, including green procurement initiatives.
• Proficiency in building management systems and CAD software.
• Strong analytical and problem-solving skills to address complex infrastructure challenges.
• Passion for driving sustainability in scientific research environments.
• Knowledge of green building standards (e.g., Green Mark) and experience implementing energy-efficient solutions.
• Excellent interpersonal and communication skills.

Applicants will be updated on the status of their applications within 4 weeks of the closing date of this job posting.

To apply, please proceed to Careers@Gov at https://sggovterp.wd102.myworkdayjobs.com/PublicServiceCareers/job/NEA-BIOPOLIS-HELIOS/Senior-Engineer-Executive-Engineer--Facility---Safety-Management-Section-_JR-10000034932

As an Equipment Engineer, you will own all assigned toolsets. The preferred candidate can troubleshoot difficult and poorly defined problems related to mechanics, electronics, and processes using tool knowledge/experience, SPC, schematics, and other available resources. The candidate will collaborate extensively with the area maintenance team and process engineering. Some collaboration will be with tool vendors, other area engineers/managers, procurement, and production.

Responsibilities:

• Provide technical leadership and management of 200MM and 300MM Semiconductor processing equipment in Support of Main Stream Semiconductor Processes and Advanced Packaging processes. Highly desirable for a candidate to have a background in at least one of the following areas: Photolithography, PVD and CVD Thin Films, Dry Etch, Wet Etch /Wafer Clean, Diffusion, Bond, Electroplate (ECD), CMP, or Metrology (some areas may be combined).
• Work with process engineering to drive root-cause corrective actions for equipment failures, implement permanent solutions, and eliminate chronic and long-term down events.
• Lead continuous improvement teams to drive tool matching, availability, and throughput improvements and reduce risk.
• Management of new tool installation, start-up, and tool upgrades to increase fab capability and capacity, lower costs, and improve yields.
• Work with minimal supervision, balancing competing priorities, to serve the needs of the Maintenance, Production, and Development organizations.
• Participate in cross-functional teams that create efficiencies across all layers of the organization.

Required Qualifications

• Degree / Diploma with 10+ years of relevant Semiconductor Industry Experience in Mechanical, Electrical, or Chemical Engineering, Materials Science, Physics, or another relevant Engineering discipline.
• 6+ years of experience within the respective areas of expertise. Experience should include one or more: Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, and Wet Chemistry.
• Demonstrated experience with the application of structured problem-solving methodology.
• Positive interpersonal skills, highly energetic and self-motivated.
• Demonstrated ability to meet requirements and deliver results.
• Ability to manage and execute multiple projects simultaneously and shift priorities to meet business needs.

Preferred Qualifications

• Diploma or Bachelor of Science/Engineering in Mechanical, Electrical or Chemical Engineering or Materials Science, Physics or other relevant Engineering discipline.
• Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, Wet Chemistry.
• Positive interpersonal skills, highly energetic and self-motivated.
• Experience with Automated Fault Detection and Classification Systems (FDC).
• Strong background with utilizing SPC.
• High level of understanding of equipment component behaviour.
• Experience Integrating Equipment Maintenance Management Software

As an Equipment Engineer, you will own all assigned toolsets. The preferred candidate can troubleshoot difficult and poorly defined problems related to mechanics, electronics, and processes using tool knowledge/experience, SPC, schematics, and other available resources. The candidate will collaborate extensively with the area maintenance team and process engineering. Some collaboration will be with tool vendors, other area engineers/managers, procurement, and production.

Responsibilities:

• Provide technical leadership and management of 200MM and 300MM Semiconductor processing equipment in Support of Main Stream Semiconductor Processes and Advanced Packaging processes. Highly desirable for a candidate to have a background in at least one of the following areas: Photolithography, PVD and CVD Thin Films, Dry Etch, Wet Etch /Wafer Clean, Diffusion, Bond, Electroplate (ECD), CMP, or Metrology (some areas may be combined).
• Work with process engineering to drive root-cause corrective actions for equipment failures, implement permanent solutions, and eliminate chronic and long-term down events.
• Lead continuous improvement teams to drive tool matching, availability, and throughput improvements and reduce risk.
• Management of new tool installation, start-up, and tool upgrades to increase fab capability and capacity, lower costs, and improve yields.
• Work with minimal supervision, balancing competing priorities, to serve the needs of the Maintenance, Production, and Development organizations.
• Participate in cross-functional teams that create efficiencies across all layers of the organization.

Required Qualifications

• Degree / Diploma with 10+ years of relevant Semiconductor Industry Experience in Mechanical, Electrical, or Chemical Engineering, Materials Science, Physics, or another relevant Engineering discipline.
• 6+ years of experience within the respective areas of expertise. Experience should include one or more: Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, and Wet Chemistry.
• Demonstrated experience with the application of structured problem-solving methodology.
• Positive interpersonal skills, highly energetic and self-motivated.
• Demonstrated ability to meet requirements and deliver results.
• Ability to manage and execute multiple projects simultaneously and shift priorities to meet business needs.

Preferred Qualifications

• Diploma or Bachelor of Science/Engineering in Mechanical, Electrical or Chemical Engineering or Materials Science, Physics or other relevant Engineering discipline.
• Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, Wet Chemistry.
• Positive interpersonal skills, highly energetic and self-motivated.
• Experience with Automated Fault Detection and Classification Systems (FDC).
• Strong background with utilizing SPC.
• High level of understanding of equipment component behaviour.
• Experience Integrating Equipment Maintenance Management Software

As part of IME’s Photonics & Sensors Department, the candidate will take lead of the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices at high RF frequencies, as well as the testing of electro-optical sub-modules and sub-systems. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices from frequency range of 0 to 110 GHz
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Manage photonics laboratory including facilities, health and safety, equipment calibration, inventory and stocktake
• Take the lead to procure laboratory equipment and consumables
• Prepare technical presentations and papers for internal meetings, as well as conferences and journals
• Collaborate with project team to ensure quality and on-time delivery for various projects
• Performs other duties as assigned.

Qualifications:

• Bachelor’s or master’s degree in Physics, Electronic/Electrical Engineering, Photonics, Opto-electronics or equivalent
• More than 5 years hands-on experience in active photonics/optoelectronic device testing, especially for high-speed optical modulator and photodetector devices and electronic-photonic integrated circuit.
• More than 5 years hands-on experiences in optical setup construction and semiconductor & optoelectronic device characterization
• Experienced on experimental data acquisition and analysis
• Skillsets in programming or instrument automation is a plus
• Strong skills in problem-solving, communication and providing technical presentations
• Industry experience and awareness is a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Summary:

• Salary up to 6k+
• MNC company - stable revenue
• Transport allowances
• Own a vehicle
• Location: Pioneer
• 5 days work week
• Sales experience in precision engineering related products

Key Responsibilities:

• Develop new business opportunities & sales leads for revenue growth and customer retention
• Achieve sales targets and analyst current market trends and industry information
• Pitch, recommend and fulfil the requirement of customer in terms of products and services offered
• Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met
• Attend problem and generate solution
• Other related ad hoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering or equivalent
• Sales experience in precision engineering related products
• Strong technical knowledge in CNC
• Own a car

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

As part of IME’s Photonics & Sensors Department, the candidate will take lead of the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices at high RF frequencies, as well as the testing of electro-optical sub-modules and sub-systems. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices from frequency range of 0 to 110 GHz
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Manage photonics laboratory including facilities, health and safety, equipment calibration, inventory and stocktake
• Take the lead to procure laboratory equipment and consumables
• Prepare technical presentations and papers for internal meetings, as well as conferences and journals
• Collaborate with project team to ensure quality and on-time delivery for various projects
• Performs other duties as assigned.

Qualifications:

• Bachelor’s or master’s degree in Physics, Electronic/Electrical Engineering, Photonics, Opto-electronics or equivalent
• More than 3 years hands-on experience in active photonics/optoelectronic device testing, especially for high-speed optical modulator and photodetector devices and electronic-photonic integrated circuit.
• More than 3 years hands-on experiences in optical setup construction and semiconductor & optoelectronic device characterization
• Experienced on experimental data acquisition and analysis
• Skillsets in programming or instrument automation is a plus
• Strong skills in problem-solving, communication and providing technical presentations
• Industry experience and awareness is a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Engage and manage various stakeholders (internal and external) expectations and communication.
• Collaborate with functional teams to conduct cleanroom/facility planning and layout
• Carry out physical area/ floor marking, coordinate with functional teams in tool purchase, movement (in/out), tool relocation plan, project timeline and capacity update.
• Perform risk analysis of various project options and outcomes
• Maintain and validate capacity/capital/space models to enable accurate assessment of wafer fabrication and operations loading needs
• Support operational efficiency improvement efforts (cycle time, OEE improvement, capacity optimization, space optimization)

Requirements:

• Degree in Engineering (Industrial & Systems Engineering), Mechanical, or relevant field;
• Proficient in AutoCAD 2D/3D and Simulation Tool preferred
• Proficient with Microsoft Words, Excel and PowerPoint proficiency
• Preferably to have industrial engineering experience in a semiconductor/ manufacturing environment
• Ability to work independently and team player to deliver in fast paced and collaborative environment

Responsibilities:

• Engage and manage various stakeholders (internal and external) expectations and communication.
• Collaborate with functional teams to conduct cleanroom/facility planning and layout
• Carry out physical area/ floor marking, coordinate with functional teams in tool purchase, movement (in/out), tool relocation plan, project timeline and capacity update.
• Perform risk analysis of various project options and outcomes
• Maintain and validate capacity/capital/space models to enable accurate assessment of wafer fabrication and operations loading needs
• Support operational efficiency improvement efforts (cycle time, OEE improvement, capacity optimization, space optimization)

Requirements:

• Degree in Engineering (Industrial & Systems Engineering), Mechanical, or relevant field;
• Proficient in AutoCAD 2D/3D and Simulation Tool preferred
• Proficient with Microsoft Words, Excel and PowerPoint proficiency
• Preferably to have industrial engineering experience in a semiconductor/ manufacturing environment
• Ability to work independently and team player to deliver in fast paced and collaborative environment

Summary:

• Basic up to 4.5k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company
• Career Advancement
• CNC machines

Key Responsibilities:

• To repair & service CNC machines in the region
• To implement service programmes for customer service
• Machine Installation
• Documentation (Service report, Machine registration, filing and record)
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electrical / Mechanical Engineering
• Min 2 years of relevant experience in servicing CNC turning / milling machines
• Possess own vehicle

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Candidate will be required to develop, secure and manage industry partnerships for the NGTC. Candidate should stay updated on RF/mmWave GaN market trends and conduct thorough market research and competitive analysis on companies, competitors and the market for actionable insights. This may involve conducting SWOT analyses to enable NGTC to come up with a strategic plan to optimise business and research collaborations.

Candidate will also be responsible for developing and executing marketing strategies to promote NGTC’s capabilities to interested parties.

Candidate will be required to work alongside various internal and external stakeholders and teams to develop NGTC’s strong value propositions and assist with market intelligence to shape the NGTC’s strategies.

Candidate will be required to carry out account management of companies for NGTC to strengthen customer relationships.

Candidate will be required to coordinate and engage with internal stakeholders such as A*STAR’s Industry and Enterprise Group, Institute of Microelectronics or various other public sector agencies.

Requirements:

• Degree in Science or Engineering
• Minimum 5 years of relevant working experience, preferably with a background in GaN technology and industrial commercialization.
• Able to structure and negotiate collaboration agreements.
• Strong analytical skills.
• Strong communication (written and verbal), marketing and interpersonal skills.
• Results oriented, pro-active, and a team player.
• Adaptable and comfortable working in a fast-paced and fast-changing environment.
• Passion to develop Singapore’s semiconductor ecosystem.

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

Candidate will be required to develop, secure and manage industry partnerships for the NGTC. Candidate should stay updated on RF/mmWave GaN market trends and conduct thorough market research and competitive analysis on companies, competitors and the market for actionable insights. This may involve conducting SWOT analyses to enable NGTC to come up with a strategic plan to optimise business and research collaborations.

Candidate will also be responsible for developing and executing marketing strategies to promote NGTC’s capabilities to interested parties.

Candidate will be required to work alongside various internal and external stakeholders and teams to develop NGTC’s strong value propositions and assist with market intelligence to shape the NGTC’s strategies.

Candidate will be required to carry out account management of companies for NGTC to strengthen customer relationships.

Candidate will be required to coordinate and engage with internal stakeholders such as A*STAR’s Industry and Enterprise Group, Institute of Microelectronics or various other public sector agencies.

Requirements:

• Degree in Science or Engineering
• Minimum 5 years of relevant working experience, preferably with a background in GaN technology and industrial commercialization.
• Able to structure and negotiate collaboration agreements.
• Strong analytical skills.
• Strong communication (written and verbal), marketing and interpersonal skills.
• Results oriented, pro-active, and a team player.
• Adaptable and comfortable working in a fast-paced and fast-changing environment.
• Passion to develop Singapore’s semiconductor ecosystem.

• To develop, document and support the build of high precision plastic injection tooling and molded parts for manufacturing.

• Support Program team during upfront new project quotation stage by providing accurate upfront tooling/product DFM that matches the right quality requirements.

• To meet customer for DFM and mold concept review to ensure customer’s technical requirements and concerns are addressed.

• Support Tooling Department by conducting internal tooling design and DFM reviews before tool launch.

• Support Production in areas like molding process optimization, implement manufacturing fixtures and automation for reliability and efficiency improvements.

• Support Quality Team in the design and fabrication of test/measurement fixtures.

• To coordinate mold trials, tooling and molded part troubleshooting and carry out necessary engineering changes to ensure parts can be produced smoothly with the required quality.

Your areas of knowledge and expertise that matter most for this role:

• Excellent technical analytical ability with strong interest for problem solving.

• Self-motivated team player with good interpersonal and communication skills.

• Past working experience or knowledge of Precision Tooling Design/Fabrication, Micro Plastic Injection Molding Process or Manufacturing Process Engineering related field preferred.

• 3D CAD software skill for Siemens UG NX or PTC Creo 4.0 and above

*Please note that Cyrus is in the process of relocating its office to Loyang by Q4 2024.

• Assist project manager in planning and execution of project plans at the construction site,
• Execute project plan and ensure works are completed as per the schedule and in accordance with contract specification and design drawing.
• Ensure the construction site fulfills the authority's code of practice and complies with house safety rules & regulations.
• Handle correspondence job paperwork and submission.
• Liaise with all parties involved in the project, including authorities, consultants, clients, subcontractors, and suppliers.
• Attend site meetings and inspections, regularly report on progress, and monitor the schedule.
• Prepare site meeting minutes, monitor work schedules, project costing, and procurement, and coordinate with all parties to ensure work progress is completed within the target time and budget.
• Supervise and report the progress of the work to the Project Manager.
• Update construction drawings,
• Give feedback to the project manager on any issue encountered on-site and propose a feasible solution.
• Any other ad-hoc duties assigned by the Project Manager,
• Review of civil & structural working drawings and shop drawings
• Organizing regular meetings with sub-contractor’s technical teams to resolve technical problems in pre-construction and construction phase.
• Preparation of RFI for site inspection for construction, MPI test, welding works and post concrete works and also involving in site inspections with RTO.
• Reviewing and site supervision of site work.
• Assisting project manager for planning and preparing daily progress reports.
• Tracking and optimizing manpower for each works.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

You will work as an integral part of the laboratory operations team, providing support to the laboratory manager in operations and related laboratory duties such as safety matters, procurement and core equipment training. If you thrive in a dynamic environment and have a passion for managing laboratory operations and contributing to scientific advancements, this role could be an exciting fit for you!

Key Responsibilities

• Oversee the daily operations of the laboratory, ensuring that all processes and procedures are followed accurately and efficiently
  Facilitate training and development of laboratory users
  Support the operations team on laboratory safety and documentation
  Ensure compliance with all relevant regulations and safety standards to maintain a safe working environment
  Manage the laboratory procurement of equipment and supplies, including negotiating contracts with vendors and suppliers
  Implement and oversee maintenance schedules for laboratory equipment to ensure optimal performance and longevity
  Maintain the microfabrication cleanroom in functional state
  Stay abreast of technological advancements to enhance operational effectiveness.
  Other ad-hoc duties

Qualifications

• Bachelor’s Degree in Engineering or related field from a reputable university
• At least one year of working experience in a research/laboratory environment and familiarity with research operations
• Working experience in rapid prototyping, CAD or cleanroom microfabrication is preferred, but not necessary
• Understanding of safety regulations and compliance
• Ability to work cooperatively and communicate effectively with team members and researchers
• Passionate in mastering research equipment and passing on knowledge to users

To apply, please send your cover letter, CV and three references (name, institution, email). Only shortlisted candidates will be contacted.

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

Basic salary: ($3,200 - $4,500)

Location: Serangoon

Mon - Fri, 8.30am to 6pm

Job Description

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Job Requirements

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA would be highly advantageous
• Good communication and problem-solving skills
• Medical product experience and Quality Management System exposure would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

ROLE:

A*Star-IME is currently working on establishing a hybrid fabrication platform for 150mm and 200mm Silicon Carbide (SiC) power MOSFETs as a new pillar on Singapore"s Future of Microlectronics in wide-bandgap. The main objective of this SiC RnD program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, specifically focusing on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this role to be successful include the development and integration of several process modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, and ohmic contact formation. We are actively looking for individuals with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• Lead develop process technology for SiC power MOSFETs and ensure it meets the requirements for prototyping manufacturing

• Collaborate with advanced process module development team to establish a process flow for fabricating specific MOS devices

• Responsible to develop and improve test structures that enable fast and rigorous characterization of process

• Accountable to improve device performance and yield through the design, execution, and analysis of experiments for each specific device and product

• Work with cross-functional teams to minimize defects and address technical and yield concerns

• Drive CIP (Continuous improvement plans) to deliver integrated process modules and specific device per project goals

• Make decisions regarding the delivery of process, active and passive devices to multiple customers

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device physics

• Proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and the physics of MOSFET devices

• Strong communication skills to effectively communicate information about module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data, coupled with strong presentation abilities

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

• We are a chip design service company invested by an international consortium and founded by a senior chip design technical team.
• The company is headquartered in Singapore and will take root in Singapore for long-term development.
• The company has strong R&D capabilities and its core technical team members all have more than 10 years of experience in chip design.
• We have rich industry experience and deep practical accumulation in ASIC design and business management.

Our office is located in one North and walking distance from MRT.

We Provide competitive salary and compensation package for the right candidate. We are work-life balance and friendly to employees with various benefit.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is prefered. ( for excellect junior candidates with 3+ years experience will be considerated )

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.

4. Strong communication ability, good confidence and self-movitation.

5. Bilingual and with good teamwork spirit.

6. Salary is negotiable for excellent candidates.

Summary:

• Basic up to 6k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

ROLE:

A*Star-IME is currently working on establishing a hybrid fabrication platform for 150mm and 200mm Silicon Carbide (SiC) power MOSFETs as a new pillar on Singapore"s Future of Microlectronics in wide-bandgap. The main objective of this SiC RnD program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, specifically focusing on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this role to be successful include the development and integration of several process modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, and ohmic contact formation. We are actively looking for individuals with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• Lead develop process technology for SiC power MOSFETs and ensure it meets the requirements for prototyping manufacturing

• Collaborate with advanced process module development team to establish a process flow for fabricating specific MOS devices

• Responsible to develop and improve test structures that enable fast and rigorous characterization of process

• Accountable to improve device performance and yield through the design, execution, and analysis of experiments for each specific device and product

• Work with cross-functional teams to minimize defects and address technical and yield concerns

• Drive CIP (Continuous improvement plans) to deliver integrated process modules and specific device per project goals

• Make decisions regarding the delivery of process, active and passive devices to multiple customers

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device physics

• Proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and the physics of MOSFET devices

• Strong communication skills to effectively communicate information about module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data, coupled with strong presentation abilities

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

You’ll get to:

• As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.
• Work with vendors, government agencies and teams to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Analyse and decompose complicated software systems and design a strategy to test these systems.
• Review Quality Assurance Plan and Test Strategy to provide timely and meaningful feedback.
• Ensure all required testing documentations are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.
• Conduct research on emerging test automation technologies that can optimize and accelerate the project delivery.

What you’ll bring to the team:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 5 years' experience in application exploratory testing and regression test automation, application performance testing, and/or application security testing. Hands-on experience in automating various types of tests such as unit tests, API tests, Integration Tests, UI Tests, and End-to-end Tests.
• Create and support test automation strategies and implementations
• Knowledge of test best practices, test methodologies and their corresponding tools.
• Must have strong troubleshooting and debugging skills
• Meticulous attention to details
• Strong analytical, interpersonal and presentation skills
• Keen to share knowledge with team mates
• Curious, open to new ideas
• Quick to learn new skills
• Proactive, self-driven and motivated

Bonus points for:

• ISTQB, CSQA, CSTP or other relevant certification
• Excellent verbal communication and listening skills
• Experience in agile development environment will be an added advantage
• Experience in DevOps will be an added advantage
• Experience in Performance testing will be an added advantage