This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Responsiiblitiies:

• Responsible for the Software Test design and execution for the applications under test.
• Work closely work with the QA Manager, Business/Functional Analyst and Project Manager through the Project Life Cycle.
• Able to perform defect reporting and verification of the fixes.
• Effective Communication with strong interpersonal skills and good analytical, problem solving skills.
• Conduct Test Readiness Review (TRR) to ensure readiness of the test phase.
• Experience in API testing using postman.
• Knowledge of SQL and scripting.
• Hands-on experience and expertise with test management tool.
• Development /scripting skills in programming languages which are compatible for Selenium WebDriver such as Java/C#/Python.

Requirement:

• Bachelors degree in comuter science or equivalent
• Possess 3 to 5 years of experience in Funcational / Automation testing
• Experience in Software Development Life Cycle Process (SDLC) , Software Testing Lifecycle (STLC) ,Test Methodologies and defect life cycle.
• Knowledge and experience in analysing Software Requirement Specification and identifying and creating the required test scenarios, test cases, test data and document traceability matrix to ensure sufficient test coverage.
• Experience in executing test cases and test plans to support the quality assurance activities throughout the software lifecycle.
• Healthcare domain knowledge.
• Experience in testing mobile apps.
• Experience in Automation of Web Applications.
• Good Knowledge in using Version control Management tools such as Bitbucket, GitHub and sound understanding of the code review process.

Shortlisted candidates will be offered a 1 Year Agency contract employment.

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

• Developing and planning engineering strategies
• checking on paper and site work progress
• conducting project safety briefing
• controlling materials order and usage
• supervising construction team
• increasing company's work quantity and quality
• ensure that structure are constructed in a safety and sturdiest manner
• reporting to director and PM
• liaise with consultants, conractors and authorities
• miscellaneous duties and adhoc works

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Key Responsibilities:

1. Design & Implementation:

• Integrate Azure Sentinel with on-premises and cloud-based resources for comprehensive threat visibility.

• Develop and manage Log Analytics Workspaces and data connectors.

2. Security Monitoring & Threat Detection:

• Create and maintain custom rules, alerts, and automation playbooks.

• Analyze security events, identify threats, and provide actionable recommendations.

• Monitor and manage SIEM dashboards for real-time threat intelligence.

3. Incident Response & Management:

• Respond to security incidents and conduct root cause analysis.

• Coordinate with stakeholders to mitigate risks and resolve vulnerabilities.

4. Optimization & Automation:

• Enhance Sentinel performance by optimizing data ingestion and query performance.

5. Documentation & Reporting:

• Develop and maintain documentation for configurations, processes, and incident responses.

• Generate detailed reports on security incidents, trends, and recommendations.

Qualifications & Skills:

• Bachelor’s degree in Computer Science, Information Technology, Cybersecurity, or related field.

• Proven experience with Azure Sentinel, Microsoft Defender, and Azure Security tools.

• Strong understanding of SIEM platforms and security operations.

• Knowledge of KQL (Kusto Query Language) for writing log queries and analytics rules.

• Familiarity with threat detection frameworks like MITRE ATT&CK.

• Experience with incident response, threat hunting, and SOC operations.

Being client representative for all Process-related activities and installations

Supporting the E.O in getting the necessary information at the battery limits of the package

Ensuring alignment between equipment suppliers and client Specification and Guidance

Reviewing design and technical documentation

Following-up construction & all testing activities falling under the package' scope

Ensure systems start-up and punch list solving

Provide projects support in terms of technical expertise, contractors' management and troubleshooting capabilities.

Facilitating handover process towards the end user

Review documents for ITT process & contractors' selection

Detailed design studies review with contractors, including follow up of yellow reviews, functional specifications, piping and vessel design, 3D-model

Works supervision, Walkdowns performed, FAT, SAT, IQ, OQ + punch list follow-up

Provisional and final acceptances

Final handover for process packages and systems.

Experience in the Bio-Pharmaceutical industry

Perform his/her work in an EHS and cGMP high-demanding environment.

Chemical or Process engineering degree is required.

10 years of experience in the field of Bio or Vaccine Process engineering is required, ranging from early design to facility start-up.

Deep knowledge of commissioning and qualification of similar production trains is a must.

Experience with Centrifugation and Ultrafiltration systems is a must.

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Data Center Engineer
• Working Location: Boon Lay
• Working Hours: 5 days, Mon – Fri (Morning Shift 6 AM – 2 PM / Afternoon Shift 2 PM – 10 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform periodic walk-through, validation of equipment status, amber lights check, etc.
• Review work order requests in the queue and respond to semi-routine work orders by adhering to commitment times.
• Escalate and expedite orders to appropriate teams upon standard operating procedures.
• Rack and stack semi-routine customer equipment tickets.
• Support datacenter standard operating cross-connect work order requests.
• Support standard operating testing and standard operating installations of customer assets.
• Support standard operating procedures of layer 1 cross-connect certification testing.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma / Degree in IT/Computer Science, or related field.
• Minimum 1 year of IT experience or equivalent.
• Prior working experience in a Data Center, Network or Server environment would be an added advantage.
• Must be comfortable with shift rotation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66104 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Our Client is a leader in the Energy Manufacturing industry in Singapore. Due to their current expansion plan, they are looking for an Electrical Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsible;

• Resolve plant faults by performing troubleshooting and conducting root cause analysis.
• Implement approved plant improvement projects and generate technical specifications for equipment parts and work services. Initiate requisitions when necessary.
• Conduct scheduled plant inspections based on the maintenance regime and carry out plant maintenance activities.
• Supervise maintenance contract works and develop work procedures for all maintenance tasks.
• Prepare comprehensive reports on a weekly and monthly basis, covering activities, overhauls, technical matters, and trips.
• Any ad-hoc duty as assigned

Job Requirements:

• Min degree in Electrical Engineering
• Exhibit good knowledge in Electrical systems.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

To express your interest in this opportunity/position, please click APPLY NOW or forward your CV to [email protected]

Kindly note that only candidates selected for shortlisting will be contacted.

JOB DESCRIPTION:

We are seeking a highly skilled and experienced Licensed Aircraft Engineer to join our team in Singapore. The ideal candidate will be responsible for performing and certifying aircraft maintenance tasks, attending to routine transit/daily/weekly/monthly checks, troubleshooting, and repairing aircraft and engines, and ensuring compliance with regulatory requirements and company policies and procedures. The role is a mixture of base and line maintenance, with the percentage allocated depending on workload.

RESPONSIBILITIES:

• Perform and certify aircraft maintenance tasks including inspection, repair, modification, and functional tests.

• Attend to routine transit/daily/weekly/monthly checks and other line maintenance duties.

• Inspect, troubleshoot, and repair aircraft and engines and all associated aircraft systems.

• Inspect finished work, carry out operation/functional tests, and rectify aircraft defects.

• Sign-off all tasks performed and comply with Airworthy Release.

• Manage and maintain tool & equipment store and provide recommendations, if applicable.

• Base Maintenance: 70%, Line Maintenance: 30%, depending on workload.

• Ensure that all maintenance activities comply with regulatory requirements and company policies and procedures.

• Maintain accurate records of all maintenance activities performed.

• Collaborate with other maintenance and engineering personnel to troubleshoot and resolve complex aircraft issues.

REQUIREMENTS:

• A valid CAAS license or an Aircraft Maintenance License, that is transferable to a Singaporean CAAS license (EASA, CASA, DCAM, etc.).

• Possess at least 2 type ratings, with a minimum of one of the following type ratings: A320, A350, A380, B747, B777, and/or B787.

• At least five years of experience as an LAE.

• Excellent interpersonal and communication skills (proficient in English reading and writing).

• Good customer relationship skills.

To express your interest in this opportunity/position, please click APPLY NOW or forward your CV to [email protected]

Kindly note that only candidates selected for shortlisting will be contacted.

Our Company is working closely with a Prestigious Public Listed organisation in Singapore. Due to our dynamic expansion in projects, we are looking for Associate Engineers to be part of our technical team, able to diagnose errors or technical problems and repair of equipment/system

Responsibilities

• Able to do calibrations, repair, testing and servicing of electrical/ mechanical Instrumentation equipment/ system
• Generate calibration data & service reports
• Perform preventive maintenance activities as per documented schedules and standard on electrical/ mechanical equipment/ system
• Perform any other related duties as assigned by immediate supervisor

Job Requirement

• Nitec/ Higher Nitec/ Diploma/ Degree in Electrical/ Electronics/ Mechatronics/ Mechanical/ Manufacturing/ Aerospace Engineering
• Self-motivated, self-discipline and a service mindset
• Independent, commitment and willingness to learn
• Able to start work immediately or within a short notice is an advantage
• Entry level candidates are welcomed to apply.

Other Information

• Training will be provided

Interested applicants, please email your updated resume (in MS Word or PDF) to [email protected] indicating availability date, current and expected salary. Only short-listed candidates will be notified.

• Opportunity working with global businesses for project exposure
• Opportunity to work with an experienced engineering team

About Our Client

Our client is a leading AV system integration company in the region, focusing on design and build for professional audio visual solutions for their clients.

Job Description

• Lead, manage, collaborate, and work with internal staff like AV Designer, Drafter, Engineer, Site Engineer, Safety Officer, and external parties like, Consultant, Main Contractor, Subcontractor, Manufacturer, and Supplier.
• Study schematic design and construction drawings to produce AV construction drawings
• Manage Project schedules, Project budgets, change in orders, Bill of Material
• Manage customer's expectations and deliver customer experience

The Successful Applicant

• Minimum 2 years' experience in project management for construction sites or A&A works for M&E or ELV solutions like CCTV or infrastructure (Structure cabling)
• Able to interpret construction drawings
• Ability to use AutoCAD or REVIT

What's on Offer

As a growing firm with a tightly-knit team, the successful candidate will get the chance to contribute to a highly performing team while having the autonomy to make certain decisions for the team.

Contact

Winson Low (Lic No: R22106039/ EA no: 18C9065)

Quote job ref

JN-012025-6635716

Phone number

+65 6416 9865

Michael Page International Pte Ltd | Registration No. 199804751N

Job Description

• Manage project cycle to meet the deadline.
• Coordinate with external parties and customers to plan, organize and direct activities concerned with assigned projects.
• Develop project schedules in compliance with customer requirements, deadlines, and/or milestones.
• Develop mechanisms to track schedule progress in the field and update the schedule regularly.
• Responsible for site activities, coordination and supervision works related to engineering and system design.
• Ensure timely completion of all projects particularly the T/C schedules.
• Responsible for project management including attending meetings, coordination, design etc.
• Create AutoCAD Drawings, Submission & Documentation Responsible for completion of project which involves go on site troubleshooting, Testing & Commissioning and meetings.

Requirements

• At least 2 Years of local working experience in the related field is required for this position.
• Ability to work independently and target oriented in a fast-paced environment.
• Able to visit job site.

Responsibilities:

• Proficient in Operating System such as AWS Linux, Red Hat Enterprise Linux and Microsoft Windows
• Maintain, Manage and Monitor Cloud Infrastructure
• Resolve IT infrastructure issues
• Proactive handling of project and supporting project implementation
• Create high-quality technical documentation
• On-board new Cloud technologies, challenge existing implementation in a professional and constructive manner
• Engage in Cloud security activities

Requirements:

• Ability to use automation tooling and frameworks such as Jenkins, AWS
• Familiarity with cloud security, particularly AWS & GCP Security concept.
• Analytical and problem-solving mindset with the drive to research and learn in pursuit of solution.

To apply please click the Apply button or send us your updated profile to [email protected]

EA Licence No.:18S9405 / EA Reg. No.:R1330864

Percept Solutions is undergoing a growth phase and are on the lookout for talent. Applicants are encouraged to follow Percept Solutions on LinkedIn @ https://www.linkedin.com/company/percept-solutions/ to stay up to date on our upcoming roles and events.

Epergne Solutions is looking for AI- ML Engineer

Job Role :

Responsible for ensuring that ML models and Data pipelines are deployed successfully into production

•Develop and maintain backend services for Data and ML

•Optimize and manage databases

•Deploy applications to AWS cloud leveraging on the full spectrum of the AWS cloud services

•Automate model training, testing and deployment using CI/CD

•Understand and implement metrics to verify effectiveness and soundness of the ML model

Skills Required

•5 years of relevant work experience in developing backend services and working with relational databases

•Experience working with cloud services, preferably AWS

•Experience with Python and related ML libraries (eg. Pandas, Pytorch)

•Experience with database languages (e.g. SQL)

•Experience with CI/CD, preferably Jenkins

•Experience with Docker

•Experience working in a multi-disciplinary team of data scientists, software engineers, product managers and subject domain experts

•Experience in Agile working environment

Preferred requirements

•Experience with AWS machine learning cloud services like AWS Textract, Comprehend is preferred

•Experience with Dagster/Airflow is preferred

•Experience with Snowflake is preferred

•Experience with Azure OpenAI API is preferred

Qualification :

Formal education in Computer Science or a related field, such as Software Engineering or Data Engineering

Job Description

• Prepare and review the design of the Mechanical Works, such as piping & equipment drawings, calculation and data sheets.
• Involve in daily coordination with internal C&S and BIM team to resolve all the clashes, penetration etc.
• Develop the work schedule and coordination of the project works to ensure project is on schedule.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of mechanical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Prepare all relevant checklist for Installation and Testing & Commissioning Works.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Collaborate with internal stakeholders, clients, consultants, vendors and contractors.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all Mechanical Works related design, installation and Testing & Commissioning Works.

Requirements

• Degree in Mechanical Engineering.
• 5 to 8 years of relevant experience in the construction industry. Working experience in water or wastewater industry will be an advantage.
• Familiar with Auto CAD, Mechanical, Structure drawings and Microsoft Office.
• Experience in design, installation, testing and commissioning of the mechanical works e.g. pipings, pumps etc.
• Experience in Project Execution, Project Coordination, Supervising and Coordination with sub-contractors, consultant, and Client.
• Good technical knowledge in understanding the Mechanical System.
• Well versed in BIM software i.e. Bentley and Navisworks
• Team player with good interpersonal skills.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and able to work independently with minimal supervision.
• Will be required to work full time on project site.

Responsibilities

• To ensure smooth operation of site activities.
• To Provide logistical support (site utilisation) when needed, as requested by sub-contractors.
• To be the liaison for the coordination of different trades within the same discipline.
• Responsible for all on-site engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients queries to ensure timely work arrangements.
• Involve in day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and local authorities’ quality standard.
• Manage project documentation and maintain accurate records.
• Ensure compliance with all health and safety regulations.

Qualifications

• Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification.
• Experience/Knowledge in in Bridge Construction/ Crosshead/ Lifting Frame /Launching Gantry Operation/ Pre-cast Segment Method/ MRT/ LTA is an advantage.
• Availability for Night Shifts: Candidates must be able to work during night shifts.
• More than 3-years of site experience in Construction sector, preferably in superstructure crosshead/ precast segmental bridge and Launching Gantry operation or similar.
• Good team player and able to work independently
• BCSS Certificate
• Interested applicants are required to submit their detailed CV and state their current and expected salary.

Location: Teban Gardens West Region

Job Scopes:

• Lead the commissioning and testing of electrical installations and equipment to ensure they meet required standards and specifications
• Prepare and review commissioning plans, procedures, and reports
• Collaborate with project managers, contractors, and other stakeholders to coordinate and execute commissioning activities
• Identify and resolve any electrical issues or discrepancies during the commissioning process
• Provide technical support and guidance to site teams during the installation and testing of electrical systems
• Ensure all commissioning activities comply with relevant regulations, codes, and safety standards
• Maintain accurate records and documentation of commissioning activities
• Participate in the development and implementation of continuous improvement initiatives

Job Requirements:

• Bachelor's degree in Electrical Engineering or a related field
• Minimum 2 years of experience as an Electrical Commissioning Engineer in the engineering industry
• Experience in height tension is a plus
• Proven track record of successfully commissioning electrical systems and equipment
• Excellent understanding of electrical engineering principles, codes, and regulations
• Strong problem-solving, analytical, and troubleshooting skills
• Effective communication and collaboration skills to work with cross-functional teams
• Proficient in the use of commissioning software and tools
• Ability to work independently and manage multiple projects simultaneously

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected].

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Description:

• Review and analyse requirements, specifications, and technical design documents to provide timely and constructive feedback.
• Develop detailed, comprehensive, and well-structured test plans and test cases that adhere to industry standards.
• Effectively estimate, prioritize, plan, and coordinate testing activities to ensure comprehensive test coverage.
• Design, develop, and execute automated testing scripts utilizing reliable automated testing tools.
• Identify, document, and meticulously track defects, ensuring prompt resolution and thorough regression testing.
• Monitor the debugging process and track quality assurance metrics, including defect densities and open defect counts, to maintain high quality standards.
• Stay informed about emerging testing tools and methodologies to enhance testing effectiveness.
• Collaborate closely with development and project management teams to facilitate smooth SIT and UAT processes.

Job Requirement:

• Bachelor's degree in Computer Science, Engineering, or related field.
• Experience in software quality assurance is essential, demonstrating a strong understanding of QA methodologies, tools, and processes.
• The ability to develop clear, concise, and comprehensive test plans and test cases is also critical.
• Familiarity with Agile and Scrum development methodologies is highly regarded.

Roles & Responsibilities:

· Assist the Project Manager in all on-site technical/ engineering matters and authority submissions.

· Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports.

· Lead in Site Coordination and execution relating to the construction project.

· Planning of micro-scheduling with other trades/disciplines against the Master program

· To update structural/architectural/M&E progress with scheduling tools.

· Supervise and monitor projects carried out in accordance with the company’s operating procedures, quality standards & and contractual specifications.

· Ensuring supervisors & and foremen meet clients’ regulatory work requirements.

· To check and ensure compliance with the TOP checklist

· Responsible for all inspection activities being carried out.

· Ensuring environmental, safety, and health practices are carried out at all times.

Requirements:

· Degree in Civil / Mechanical / Electrical or recognized by PE Board/ BCA

· 1-2 years’ experience in Building Engineering projects, fresh graduates are welcome to apply

· Experience with Precast/PPVC/MET projects will be a plus

· Proficient in MS Office, AutoCAD, and BIM

· A team player with a positive working attitude

Job Description

• Industry/ Organization Type: Manufacturing/Semi-conductor
• Position Title: Field Service Engineer
• Working Location: Kaki Bukit
• Working Hours: Monday – Friday, 8.30am – 5pm
• Salary Package: Up to $3,000 + Transportation Allowance + VB
• Duration: Permanent

Key Responsibilities

• Execute service, installation, and troubleshooting assignments both in local and international locations.
• Oversee spare parts inventory control to ensure optimal stock levels and efficient operations.

APPLY NOW!!!

• Minimum NITEC in Electronics/Electrical/Microelectronics Engineering, or related.
• Cleanroom working experience will be highly advantageous.
• Experience in machine setup, installation, modification, servicing, troubleshooting, and repair.
• Comfortable with travelling
• Inexperience candidates are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #72367 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Electrical Engineer
• Working Location: Cleantech Loop (Jurong West)
• Working Hours: 5 days (Monday to Friday 9AM – 6PM)
• Salary Package: Basic Salary up to $3,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Design and develop hardware for battery protection circuits, including choosing and controlling contactors and relays.
• Create and develop battery sensor circuits, focusing on circuit design, component selection, and testing/calibrating sensors for voltage, current, and temperature.
• Develop software for battery protection schemes in the Battery Management System (BMS), covering protections for over/under voltage, current, and temperature.
• Evaluate the battery's State-of-Charge (SoC) and develop the related firmware in the BMS.
• Research, compare, and select the appropriate microcontroller unit (MCU) to implement the BMS firmware.

APPLY NOW!!!

• Higher Nitec/Diploma in Electrical or Power Engineering, or equivalent.
• Experience in designing and testing BMS protection circuits.
• Firmware development skills for MCU in battery protection.
• Skills in designing and testing measurement circuits in BMS.
• Experience with sourcing and procuring electrical components.
• Skills in project planning and implementation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71570 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Assistant Engineer / Mechatronics Assistant Engineer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8am to 6pm)
• Salary Package: Up to $3000 + AWS
• Duration: Permanent Role

Key Responsibilities

• Perform electrical wiring including installation, servicing and troubleshooting of machine equipment
• Identify and document issues in assembly and testing phases
• Conduct on-site machine commissioning and client training
• Complete in-house automation machine assembly and wiring
• Analyze and solve machinery issues during testing and commissioning

APPLY NOW!!!

• ITE/Diploma in Engineering or related field
• Individuals without experience but with a keen interest in engineering are encouraged to apply

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66189 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781