• Marine & Offshore industry
• Basic up to $7k + yearly bonus
• 5 days
• Working location: Jurong area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Electrical Design: Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• System Optimization and Performance Enhancement: Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Documentation and Reporting: Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Regulatory Compliance and Safety: Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.

Requirements

• Min Diploma in Electrical Engineering or related.
• Min 3 years of experience in Electrical Design in Marine/ Automation/ Automotive industry.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience
• Experience / knowledge in CMOS Image Sensor and Image Signal Processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

The Network Engineer is responsible for managing day to day support of operational tasks, requests, incidents, and changes meeting customer’s requirements and agreed service levels. Perform and support regular preventive maintenance tasks.

The activities include:

• Respond and handling of customer requests/queries
• Incident resolution
• Change and Service Request fulfilment
• Problem ticket closure
• Preventive maintenance tasks fulfilment
• Vulnerability assessment
• to assist the Team Lead/Operations Manager to train and guide junior team members
• Develop and enhance NOC team capability

Make an Impact by

• Analysing, troubleshooting and correcting network problems remotely and on-site
• Responsibility for documenting incident RCA report the configuration of the system and (network) system performance tuning
• Responsibility for security compliance, patching, health check & hardening remediation
• Maintaining and administering perimeter security systems such as firewalls and intrusion detection systems
• Performing standard or project change request as per change window
• Provide on-call 24 x 7 support on a rotating basis
• Responsible for applying operating system updates, patches, and configuration changes
• Perform Preventive Maintenance
• Participate in customer weekly sessions

Skills for Success

• Degree in Computer Science / IT or equivalent
• Minimum 2 years of experience in in Network support and maintenance (LAN/WAN/Cloud)
• Minimum CCNA Certified
• Experienced in network/security administration in enterprise DC and Public Environment
• Experiences in supporting firewall /network product such as Cisco routers & switches, Cisco Firewalls, Cisco ACI, Aruba, Infoblox, Citrix load balancers, Solarwinds etc
• Experienced in troubleshooting system and network problems, diagnose and solve hardware/software issues, analysing system logs and identifying potential issues/incident
• Good to have a valid Singapore class 3 driving license

Job Description:

• Under direct supervision, applies functional requirements and uses engineering tools to design electronic circuits or control systems for product changes or new developments
• Uses software tools or applications to analyze and conduct tests on electronic circuits or systems and document performance in comparison with design criteria
• Identifies the testing objectives at a component level per Halliburton's Health, Safety, and Environment procedures and evaluates test results
• Assists in preparing component specifications, follows work processes to document designs, and assists in the preparation of material for design reviews
• Collaborates with mentors to understand the basic content required to submit an invention disclosure and recognizes ideas that have IP potential without disclosing confidential information
• Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions. Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standardsResponsibilities:
• Under direct supervision, applies functional requirements and uses engineering tools to design electronic circuits or control systems for product changes or new development
• Uses software tools or applications to analyze and conduct tests on electronic circuits or systems and document performance in comparison with design criteria
• Identifies the testing objectives at a component level in accordance with Halliburton’s Health, Safety, and Environment procedures and evaluates test results
• Assists in preparing component specifications, follows work processes to document designs, and assists in preparation of material for design reviews
• Collaborates with mentors to understand the basic content required to submit an invention disclosure, and recognizes ideas that have IP potential without disclosing confidential information
• Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions
• Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standards

Key Responsibilities:

• Design, simulation, and implementation of high-temperature electronic systems, encompassing component selection, qualification, and PCB assembly practices
• Functional and qualification testing of the designed PCB boards and sub-assemblies
• Preparation of technical reports and presentations

Requirements:

• Skills acquired through the completion of an undergraduate degree in Electrical Engineering or similar discipline.
• Basic knowledge of various filters, amplifier topologies, and architecture
• Ability to perform simulations to verify designs.
• Basic knowledge of ADC, DAC, LDO, and switching power supply topologies.
• Working knowledge in commonly used circuit simulators, such as LTSPICE, etc.
• Experience in using lab equipment, such as oscilloscope, etc
• Experience in common PCB design CAD tools, such as Siemens PADS, is an advantage
• Experience in MATLAB and LABVIEW is an advantage

Candidates that exceed the minimum job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, job opportunities might be available for the Senior Electrical Engineer role

We are seeking a talented and motivated Research Engineer to join our team focused on developing cutting-edge AI models for vision inspection. This role involves leveraging state-of-the-art computer vision and machine learning techniques to solve complex manufacturing inspection challenges.

Responsibilities:

-Design, develop, and optimize AI models for image-based vision inspection tasks.

-Implement and fine-tune state-of-the-art models such as YOLO, Yolact, DeepLabV3, Vision Transformers, and others.

-Develop and maintain Python-based pipelines for data preprocessing, model training, and evaluation.

-Research and implement innovative algorithms to improve model accuracy and efficiency.

-Collaborate with cross-functional teams to understand project requirements and deliver high-quality integrated solutions.

-Document research findings, experimental results, and software implementations.

-Stay updated with the latest advancements in AI and computer vision technologies.

Job Requirements:

-Bachelor's or Master's degree in Computer Science, Electrical Engineering, or a related field.

-At least 3 years of experience

-Strong proficiency in Python programming.

-Expertise in deep learning frameworks like PyTorch (mandatory) and TensorFlow (preferred).

-Hands-on experience with computer vision models, including YOLO, Yolact, DeepLabV3, Vision Transformers, etc.

-Familiarity with image processing techniques and libraries such as OpenCV.

-Strong problem-solving and analytical skills.

-Strong communication and excellent writing skills

-Have a strong work ethic, and able to work on own initiative.

-Team player, communicate efficiently, be flexible and details oriented.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

• CP test program development.
• Work with designer to develop test programs, debug programs, solve problems.
• Work with commissioned factory to identify, propose, prioritize and implement test automations.
• Design automated test scenarios accordingly to test plan with its acceptance criteria
• The commissioned testing factory product management.
• Test plant test plan management. Ex: prepare test environment, test data, update functional test scripts according to changing requirements
• Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency
• Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

• Bachelor’s/ Master’s degree in Electronical Engineering ,Computer Science, Software Engineering or other equivalent degree/experience
• Strong VBT scripting skill and C++ programming background
• Good written and verbal communication skills in English and Mandarin is required to liaise with Chinese associates/clients
• Able to work well both independently as well as in a team
• Singaporeans are welcome to apply

Purpose of Role:

This person is responsible for ship electrical detail design activities and able to process basic design information to expand the function design into production information for the marine vessel.

This role shall perform engineering of electrical and navigation equipment to the related platform equipment, as well to interface with Ship Management System (SMS). The scope includes :

o Main Power generation and distribution system network and architecture

o Integrated electric propulsion systems, Power management systems

o Engineering integration between ship equipment / Ship Monitoring system with Electrical power generation

o Electrical fittings, equipment and panel arrangement

o Preparation of equipment connection and cable schedules

o Electrical design calculation

Responsibilities:

• Responsible for vessel electrical system detail design in accordance with Marine Classification and regulatory, as well as IMO/Solas

• Review vendors technical proposal to ensure solution meets the functional requirement

• Responsible for ensuring the Contractual technical requirement and Classification requirement of automation related design are fulfilled and within project schedule.

• Liaise with client and other internal engineering trades for project coordination.

• Attend technical review and meetings with client and vendors during project execution to ensure requirement are fulfilled, technical solutions are discussed and technical issues resolved.

Knowledge and Skills:

• Knowledge of Marine Electrical and Automation systems

• Knowledge in Autocad, Naviswork, ETAP and CADCAM 3D software will be advantageous

Requirements:

• 3 years of related experience in Ship design related engineering industries such as Marine & Offshore
• Degree in Electrical, Automation, Mechatronic or any related engineering field
• Good Interpersonal Skills, Problem-Solving skills and is a team player.
• Good time management and able to meet tight deadlines.

Other Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Job Description

• Maintain mechanical equipment, systems and processes to meet requirements, applying knowledge of engineering principles
• Provide technical support to optimise process capability of production line, ensuring smooth and efficient output.
• Assist in Product samples making prior to mass production based on customers specification
• Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
• Hands-on applications are expected

Job Requirements

• Higher Nitec or Diploma in Mechanical Engineering
• Must be able to understand Mechanical Drawings
• Able to design with SolidWorks or similar
• Able to communicate with Chinese customers and English-speaking vendors.
• A team player

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Sales Engineer offers specialized chemistry programs and related services for downstream oil and gas operations, aimed at maximizing production, protecting assets, and reducing operating costs and environmental impact. Through on-site problem-solving and innovative technologies, our team delivers solutions that assist energy customers in overcoming complex challenges in the most demanding energy frontiers. Our downstream team utilizes advanced chemistries and technologies to provide Oil & Gas customers with comprehensive and sustainable solutions to safeguard their assets, mitigate risks, and enhance profitability

Responsibilities:

• Leading Chemical Treatment Programs: Responsible for the chemical treatment programs at the client’s site, ensuring optimal performance and promptly addressing any deviations from the treatment plan.
• Analytical Field Testing: Comprehend the principles of field testing procedures and collaborate with service technicians to perform routine field testing
• Reporting and Communication: Provide regular chemical treatment program reports to clients, keeping them informed about progress and updates according to the agreed schedule.
• Inventory and Equipment Management: Oversee the planning of chemical stock levels in Singapore and manage inventory at client sites. Maintain an equipment maintenance program to ensure 100% equipment uptime and seamless operations.
• Monthly Technical Review: Prepare and deliver comprehensive monthly review materials to clients. These reviews serve as a valuable platform for discussing program effectiveness and identifying areas for improvement.
• Value-Added Projects: Actively source and develop value-added projects in collaboration with clients. These projects are designed to reduce the Total Cost of Operation (TCO) with Ecolab’s product.
• Troubleshooting and Collaboration: When clients encounter challenges related to chemical treatment programs or Ecolab’s products, step in to troubleshoot and collaborate with team members to find solutions.
• Proposal Development for New Opportunity: Develop chemical treatment proposals to enhance efficiency and address specific client requirements. Present new chemical treatment proposals to client. Lead the initiation and evaluation of new applications.
• Contract Management: Collaborate with application engineers and service technicians to ensure compliance with contractual obligations.
• Business Performance Review: Prepare and present the executive performance results material to the key client stakeholders and the head of the department. This can occur quarterly, half yearly or annually depending on contract obligation.
• Client Relationship Management: Building and nurturing strong relationships with clients is paramount. Frequent engagement ensures effective communication and mutual understanding.
• Billing and Invoicing Process: Maintain bookkeeping for client accounts under your responsibility. Verify billing amounts and work with the billing team to issue invoices to customers.

Requirements:

• Bachelor’s Degree (Chemical Engineering) with at least 8 years of relevant technical Sales & Service experience
• Should have technical sales or field sales support experience
• Must have a valid Class 3/3A Singapore Driver’s License
• Working knowledge of boilers, cooling towers, and wastewater treatment systems
• Experience with refinery or chemical processing is advantageous
• Curious and eagle to find out what customers’ needs and good approach to solutioning
• Effective critical thinking and problem solving skills
• Customer oriented and always ready to engage with customers
• Able to work in a refinery/chemical plant

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Responsibilities:

Responsible for design, development, commissioning and maintenance of inhouse Ship Management System (SMS), which includes:

• Perform system and architecture design of Ship Management System (SMS).
• Perform system integration for SMS with third party systems.
• Perform, coordinate, manage and support of Factory Acceptance Test (FAT), Set to work (STW) and Harbour Acceptance Test (HAT).
• Perform software configuration management and technical documentation.
• Perform hardware / software maintenance and troubleshooting.
• Liaise with customers, project manager and other engineering trades.
• Ensure operationality and functionality of SMS during the maintenance period of the vessel life cycle.
• Maintain close working relationships with customer, subcontractors, and suppliers.

Knowledge and Skills:

• Knowledge in PLC programming and SCADA software.
• Knowledge in control & instrumentation, and control system design.
• Knowledge in computer administration, cybersecurity and networking concepts.
• Knowledge of standard Communication protocols like Modbus RTU/TCP, Profibus, RS422, RS485, NMEA, CANbus J1939.
• Knowledge in Python, JSON, Restful, Machine Learning and Data Analytics experience will be an advantage.
• Knowledge of international codes, Marine Classification/Statutory Rules and Regulations will be an advantage.
• Experience in Site Testing and commissioning will be an advantage.

Requirements:

• Degree in Engineering in Electrical / Electronics / Computer, those with other engineering experiences are also welcome.
• At least 5 years experiences with system architecture design, system maintenance, and/or IT/Networking
• Ability to work independently under pressure, as well as able to lead a small team
• Possess good communication skills to communicate with suppliers and customers at all levels
• Possess good analytical skills and good problem-solving & troubleshooting skills

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Job Description:

• Preparation of construction schedule, monitoring of production and subcontractor's work progress.
• Able to handle with technical method statement.
• Resolving of technical matters and geotechnical issue.
• Submission of progress claims & variation order.
• Cost control measures & wastage control.
• Arrange work progress records.
• Preparation & submission of relevant documents to contractors.
• Able to attend to contractors' queries and comments.
• Attending of site progress meeting.
• Coordinate with Professional Engineer (PE) for PE Endorsement which includes test pile, trench stability, working platform, COS & etc.
• Prepare official letter to Main-contractor to record standby period, EOT claims, variation order, obstruction record
• Summarize diaphragm walls and bored pile panel record.

Requirements:

• Degree in Civil Engineering or relevant studies.
• Working experience in foundation works such as diaphragm walls and bored piles would be an advantage.
• Construction site working environment.
• Fresh Graduate are welcome to apply.

Senior/Staff Software Engineer, Edge AI - Toolchain

Job Description

We are looking for Senior/Staff Software Engineers to grow our Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

This position works in a smaller team that specifies, develops and delivers the toolchain that allows our customers and partners to develop or port AI models to run optimally on our Neural Processing Units.

Responsibilities

• Specify and develop new toolchain features for existing and new NPU architectures, working with the inference engine sub-team
• Enhance, maintain and support existing toolchain features, and modify model network layers for NPU optimality, working with the application engineering teams and sometimes customers/partners.
• Constantly improve productivity through automation in all areas

Skills

• Strong Python class based product development skills based on knowledge of design patterns
• Strong understanding of all aspects of a compiler and related development and debugging technologies, code generation, program analysis, and pipeline optimizations
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc.
• Familiarity with the following is a plus:
• Deep Learning compilers like TVM
• Deep Learning framework - PyTorch
• Eclipse development for toolchain frontend
• CPU/DSP/GPU/NPU architectures

Requirements

1. Ph.D./MS/BS in Computer Science or Computer Engineering
2. At least 5 years of commercial development experience of which at least 3 are in compiler-related areas

Position Overview:

Develop image/video processing algorithms for camera related applications.

Responsibilities:

1. Expand existing solutions to new levels of functionality, quality, and performance.
2. Assist other teams with algorithm implementation, testing and verification
3. Drive the productization of the hardware.
4. Algorithm documentation
5. Collaboration with external researchers.

Requirements:

Key Qualification:

1. BS/MS/PhD in Electrical Engineering, Computer Science or equivalent.
2. Knowledge of image processing algorithm development;
3. Good understanding of digital photography, image quality assessment.
3. Proficiency in C/C++
4. Demonstrate great teamwork, outstanding communication skills, and willingness to learn.

Advantageous:

1. Farmiliar with image and color processing techniques, including HDR, AWB, color correction, noise reduction, IR removal/suppression and CFA demosaicing, etc.
2. Proficinecy in developing, implementing and deploying image processing algorithms for ISPs, or CMOS image sensors
3. Strong mathematics background and track record of independent algorithm research.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are seeking a skilled and detail-oriented Project Engineer to manage the qualification of the Building Management System (BMS) for QC rooms. The ideal candidate will be responsible for ensuring that the QC rooms BMS meets regulatory, quality, and operational requirements through meticulous planning, execution, and documentation. This role involves close collaboration with cross-functional teams, external vendors, and contractors to deliver a fully compliant and operational system.

Key Responsibilities

• Lead the end-to-end qualification process of the QC room Building Management System (BMS), including planning, execution, and validation activities.
• Develop and review protocols, risk assessments, and qualification documentation to ensure compliance with GMP standards and regulatory requirements.
• Oversee the installation, commissioning, and operational qualification (IQ/OQ) of the BMS to verify proper functioning and adherence to specifications.
• Collaborate with stakeholders to resolve technical challenges during the qualification process.
• Create and manage project timelines, budgets, and resource allocations to ensure successful delivery of the BMS qualification project.
• Monitor project milestones and deliverables, providing updates to stakeholders on progress, risks, and mitigation plans.
• Coordinate with vendors, contractors, and internal teams to ensure smooth execution of project activities.
• Conduct risk assessments and implement mitigation strategies to address potential project challenges.
• Ensure all qualification activities align with GMP, cGMP, and other relevant regulatory guidelines.
• Maintain accurate and complete documentation, including qualification reports, deviations, and change controls.
• Support internal and external audits by providing necessary documentation and technical expertise.
• Work closely with Quality Assurance, Engineering, Facilities, and other teams to align project objectives with organizational goals.
• Act as a key point of contact for external vendors and contractors involved in the BMS qualification process.

Required Qualifications

• Bachelor’s degree in engineering, Biotechnology, or a related field.
• Minimum of 3 years of experience in project management or engineering within a pharmaceutical or biotech environment.
• Experience in qualification and validation of BMS systems or similar automated systems.
• Strong understanding of GMP and cGMP requirements.
• Proficiency in project management tools (e.g., MS Project, Smartsheet).
• Excellent problem-solving, organizational, and communication skills.
• Ability to manage multiple priorities in a fast-paced environment.
• Familiarity with HVAC systems, controls, and automation in regulated environments.
• Knowledge of risk assessment methodologies and technical troubleshooting.

Why join us?

• Generous Leave Policy including 3 days to care for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

Job Description:

• Manage the development of Unmanned Ground Vehicles (UGVs) by researching and recommending ways to improve their performance, working with technical experts.
• Manage cross-functional team members and coordinate system integration, assembly, testing, and qualification of UGVs
• Conduct and coordinate structured testing of UGVs to validate system and subsystem performance.
• Work with external vendors and internal teams to align design requirements and ensure smooth collaboration.
• Support business development activities by synthesising requirements, defining specifications, plan, drive and track the solution process for the team.
• Ensure that all necessary documentation (designs, system requirements, production details) is organized for manufacturing and production.
• Conduct market research to understand new trends in robotics and unmanned systems technology.

Requirements:

• Degree in Mechatronics, Robotics, Electrical/Electronics, Mechanical Engineering, or similar fields.
• 2-3 years of working experience in project management or product development in fields of robotics or equivalent.
• Experience in systems design, system integration, and team management.
• Good communication and management skills to handle both internal and external stakeholders.
• Ability to handle multiple projects and meet deadlines.
• Knowledge of robotics and unmanned systems.
• Hands-on approach when needed, with the ability to collaborate in a dynamic team environment.
• Experience building and testing robotics/control systems would be advantageous.

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for FP & Plumbing system installation and troubleshooting on site
• Prepare material requisition for all FP & Plumbing equipment and materials
• Prepare work programme for FP & Plumbing works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of FP & Plumbing system, including detailed design, calculation, shop drawings, pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with FP & Plumbing suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for FP & Plumbing system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all FP & Plumbing equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling FP & Plumbing works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in FP & Plumbing design calculations and Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Our Engineers support internal and external manufacturing operations remain operational, continuously improve and innovate. With our extensive range of facilities and environments, our Engineers have opportunities across many diverse areas including Biological, Chemical, Automation, Capital Projects, Maintenance, Safety, Process Development, Technical Services, Utilities and Validation.

WHAT YOU WILL DO

The Process Engineer either independently or with minimal support introduces new products to the site, provides technical expertise on the manufacture of assigned drug products on site and transfers drug products to other facilities. In collaboration with supporting functional groups, the Process Engineer provides technical guidance on deviations, investigations and customer complaints. The Process Engineer also develops and leads/participates in continuous process improvement activities to enhance site performance metrics.

• Leads simple new product introductions to the site by conducting process and equipment comparisons, new raw material introduction, development studies and clinical supplies manufacturing, cleaning processes development and validation and training of technicians as required.
• Designs and executes small/full-scale experiments using design of experiments methodology and/or simulations for new products to evaluate the impact of proposed changes to validated equipment/processes.
• Supports filing activities by developing and leading process qualification activities for equipment, process and material changes.
• Understands the principles of Quality by Design (QbD) and executes the requirements in support of a QbD filing
• Supports routine supply manufacture by providing on going technical support and reviews IPT metrics to identify and implement opportunities for improvement utilizing the lean six sigma tools.
• Proactively monitors the performance of equipment/module(s) or unit operation(s) during manufacturing and cleaning through the use of control charts. Performs statistical analysis of the data and responds to shifts and trends in performance appropriately by engaging various functional areas. The Sr. Engineer, PTO is the change owner for process Global Change Management (GCM) change controls.
• Develops continuous process verification (CPV) plans, analyses the data and authors the CPV reports and annual product reviews. Conducts periodic cleaning assessments as part of continuous process improvement.
• Executes complex equipment/process/automation changes as required for process improvements, including changes to process/cleaning batch sheets.
• Provides technical expertise related to equipment and manufacturing/cleaning processes in response to deviations to understand and eliminate the root cause(s).
• Leads investigations for emergency product complaints, investigations and deviations.
• Provides technical guidance in supports of site and divisional capital projects and new facility start-up activities, including full-scale process demonstration, process validation, and cleaning validation
• Demonstrates and promotes safety, health & environment (SHE) leadership behavior, ensuring that all activities are carried out in accordance with SHE requirements
• Any other duties as assigned by the Supervisor.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Bachelor or Masters Degree in a technical field, including Chemical/ Mechanical Engineering, or Pharmaceutical Sciences
• 0 to 3 years of technical experience in manufacturing industry preferred.
• Knowledge of problem-solving tools (such as fishbone analysis, 5 WHY, logic fault tree etc.) and troubleshooting skills
• Knowledge of data analysis (familiarity with use of statistical software such as Minitab or JMP is preferred)
• Good verbal communication skill and technical writing skill
• Attention to detail

This is an Advanced Professional Conversion Program under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Fresh graduates with relevant internship are welcome to apply
• PMETs/Mid-Careerist with no prior work experience in Biopharma industry are welcome to apply

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path
• A state-of-the-art facility that delivers solution to its customers world-wide
• Highly engaging team that aims to innovate the future