Responsibilities:

Planning, coordination, and execution of substation automation projects.

Design, costing and integration of substation automation systems according to project requirements.

Installation, testing and troubleshooting of substation automation systems at site.

Preparation of project documents and drawings.

Requirements:

Diploma in Electrical Engineering/Computer Engineering

Knowledge of data communication and Automation Systems for Electrical Network

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

(2 years contract renewable)

5 days, 8.30am- 5.50pm

Salary: $2800- $3500 + allowance

Location: East, and clients site whenever required

Job scope:

• To provide support on maintenance project.
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is preferred.

Requirements:

• At least a Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Must have at least 1-2 years of Server experience
• Able to work on scheduled standby on rotating weeks

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

• Travel Islandwide
• Good Career Growth
• East Region

As a M&E Engineer (Hostile Mitigation), you will be responsible for the following duties:

• Responsible to handle drawing management and control of technical documentation
• Interpret electrical drawing and single line drawings
• Guide the electrical site installation works
• Manage and handle team of electrical workers and assign their installation work
• Executing tests and inspections of Electrical/ Hydraulic Control Panel installations and equipment
• Collaborate with other engineers and technicians involved in the project
• Ensure the quality control of electrical appliances
• Provide electrical engineering support for assigned projects.
• Conduct Corrective Maintenance Activities
• Planning routine Preventive Maintenance Activities and assisting the maintenance team
• Developing and implementation of preventative maintenance procedures
• Testing appliances for problems and proposing solutions
• Preparing service & Site Progress Reports
• Preparation of project specific O&M Manuals and asbuilt information’s
• Any other ad-hoc duties assigned by Management

Requirements

• Minimum Diploma in Engineering (Electrical) or equivalent
• At least 2-3 Years of working experience in construction industry
• Knowledge in PLC and Hydraulic System Control will be advantageous

To apply, simply click on the ‘’apply’’ button in the job advertisement or alternatively, you can send in your resume via email: [email protected]

We regret to inform that only shortlisted candidates will be notified.

Job Responsibilities:

• To design, select, implement, test and commissioning the data communication system for Large Scale Rail Transportation in local and oversea
• To conduct Proof of concept, factory acceptance test as well as interface system integration test prior the actual design/ on site implementation.
• To conduct system acceptance test with the customer after implementation prior handling over to the customer.
• To provide high level of system availability, access controls of network resources, technical write-out and updating of the network infrastructure for the project being implemented.
• To pro actively monitor critical system and troubleshoot if there are faults detected from the system through the use of automated tools. (Example: Alcatel Omnivista Network Monitoring tool, HP Openview NMS)
• To configure and install the layer 3 switches (Example: Cisco, Alcatel) with vlan as well as the router for the network setup.
• To liaise with vendors and suppliers for job to be accomplished as well as time schedule of delivery to meet the project timeline.
• To provide relevant documentation write up for the project network design as well as IT security design/planning and etc.

Job Requirements:

• Diploma/ Degree in IT or Computer Engineering related disciplines
• CCNA/ CCNP or other relevant certification will be advantageous
• 1-5 years experience in Networking, Independent, initiative and excellent working attitude
• Experience in Cisco/ Alcatel/ Extreme/Huawei network devices or other devices such as routers, switches, etc
• Experience in routing protocol such as OSPF, MPLS will be an advantage.
• Good communication and interpersonal
• Experience in IT Security design/ planning/ implementation will be an advantage.
• Well organized, proactive and self directed, able to perform with minimal supervision and also a team player.

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655

EA Reg No: R1109557 Rose

• Oversee contract execution and monitor installation progress, ensuring timely delivery through coordination with clients, consultants, and subcontractors.
• Prepare and review method statements, shop drawings, technical submissions, and work progress reports for M&E-related tasks.
• Liaise with stakeholders to resolve technical and site issues, and coordinate with authorities for inspections, testing, and commissioning.
• Assist in procurement of materials, equipment, and labour within budget while supporting project negotiations.
• Apply expertise in Data Centers, DfMA, and specialized systems such as VAV/VRV, chillers, chilled water pipes, and lighting control systems.

Requirements:

• Diploma in Mechanical/Electrical Engineering or equivalent.
• At least 2 years of experience handling and monitoring the progress of projects in Construction industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Pre-Sales Engineer Physical Security Job Description

The role requires the applicant to design and conceptualise the integration of multiple physical security solutions to ensure solutions are cost effective, scalable and aligned to customers security needs.

Responsibilities:

• Collaborate closely with the sales team to understand the clients requirements for physical security needs and requirements.
• Support and provide technical solutioning and support during the pre-sales process supporting the sales team during tenders for solutioning, costing and validation, including, product demonstrations, technical presentations, proof-of-concept activities, technical specifications, integration plans and compliance.
• Design nd propose comprehensive integrated physical security solutions including but not limited to access control solutions, surveillance systems, ingress protection solutions.
• Collaborate closely with the project team to hand over the design concept, costing, etc for the next phase of project implementation.
• Work together with industry partners and vendors to ensure proposed solutions are robust in design and up-to date.

Qualifications:

• Education: Bachelor’s degree in IT, Security, Engineering, or a related field.
• Experience: 5 years of experience in Integrated physical security pre-sales, system integration, or a related technical field.
• Relevant Skills:
• Team Player with strong analytical and excellent problem-solving skills.
• Ability to multi-task during peak seasons
• Strong presentation and communication skills
• Strong understanding of Integrated physical security platforms and technologies

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever!

We need someone who is passionate about detecting problems, making changes for the better, and seek out innovative ways in how predict device performance! We are an equal opportunity company who values of People, Innovation, Customer Focus, Tenacity and Collaboration.

As Yield Failure Analysis Engineer in Micron NAND Technology Integration (NTI) Singapore department, you will be responsible for providing yield analysis for next-generation Micron products. In this exciting role, you will become a domain expert on physical failure analysis methods for any given electrical failure! You will also participate in the identification and communication of yield issues, assist with the root cause analysis for process deviations, characterize, probe, parametric, and fabrication data to identify the sources of failures.

Your responsibilities will include, but are not limited to, the following:

Perform Failure analysis which includes conducting electrical characterization, perform electrical verification to confirm failures, and understanding PFA techniques available for de-processing failures

Drive failure analysis initiatives for the yield enhancement team. Create and deliver new methodologies, capabilities, and innovative ways for failure analysis de-processing failures

Participate in global meetings and present results to Product Development and Process Integrations teams

Collaborate with metrology and RDA team to re-define and validate inline detection capability

Assist and support the transfer documentation of layout/architecture fundamentals of new technology from R&D to manufacturing fab.

Understand and follow all health, safety, and environmental procedures and requirements.

Successful candidates for this position will have:

• Experience in the semiconductor industry in the areas of Process Integration, Yield Enhancement, Failure Analysis, Data Science, or Unit Process.
• In-depth knowledge and direct experience with nonvolatile memories
• Minimum 4 years of related work experience in yield analysis
• Good understanding of the process flow, and interaction of process and device.
• Poses theoretical and/or operational knowledge of scanning electron microscopes (SEM), focused ion beam (FIB), Transmission emission microscopes (TEM), and Elemental Analysis (EDS, EELS).
• Fluency in Python, JavaScript, C or C++ is Windows, Linux, JMP statistic software is desirable.
• Ability to be self-motivated and self-governing with confirmed ability to work in a demanding and dynamic environment.
• Solid analysis, communication and reporting abilities with demonstrated presentation abilities.

Education:

B.S., M.S., or Ph.D. in Electrical Engineering, Microelectronics, Materials Science, Chemical Engineering, Physics, or a related field. We also consider applicants with equivalent experience.

Responsibilities:

Planning, coordination, and execution of substation automation projects.

Design, costing and integration of substation automation systems according to project requirements.

Installation, testing and troubleshooting of substation automation systems at site.

Preparation of project documents and drawings.

Requirements:

Diploma in Electrical Engineering/Computer Engineering

Knowledge of data communication and Automation Systems for Electrical Network

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Well Established Company
• Basic $ 2700 to $ 3500 + AWS + VB
• Working Location: Tuas, Singapore (Company Transport Provided)
• Working Days: Monday - Friday
• Working Hours: 8.15 am - 5.45pm
• No Experience Welcome – Training will be provided

Job Responsibilities:

• Inspect outgoing and incoming parts per the inspection procedure and specifications, including incoming process checks.
• Authorise the rejection of parts if found unsatisfactory.
• Authorise the release of conforming parts for storage and customer delivery.
• Conduct routine tests and checks on switchboards completed in the workshop.
• Test and commission switchboards on vessels or on-site to meet customer satisfaction, and address warranty claims or quality complaints.
• Maintain good housekeeping in the QA department.
• Identify issues and suggest or implement solutions to problem detected.
• Follow Quality Management System procedures for effective implementation and control
• Other ad hoc duties as assigned by superior.

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG JYA YEE (R23119014)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

Planning, coordination, and execution of substation automation projects.

Design, costing and integration of substation automation systems according to project requirements.

Installation, testing and troubleshooting of substation automation systems at site.

Preparation of project documents and drawings.

Requirements:

Diploma in Electrical Engineering/Computer Engineering

Knowledge of data communication and Automation Systems for Electrical Network

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Well Established Company
• Basic $ 2700 to $ 3500 + AWS + VB
• No Experience Welcome – Training will be provided
• Working Location: Tuas, Singapore (Company Transport Provided)
• Normal Working Hours (Monday - Friday)

Job Responsibilities:

• Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out incoming process inspection
• Authorise the rejection of parts if found unsatisfactory
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers
• Perform factory routine test and check of switchboards completed in the workshop
• Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints
• Maintain good housekeeping in the QA department
• Observe and adhere to safety rules during the performance of every task
• Initiate, recommend, or provide solutions to problem detected
• Control further processing and delivery of non-Conforming products until the deficiency has been corrected
• Follow the procedures of Quality Management System for effective implementation and control
• Carry out other responsibilities as and when assigned by the superiors

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

- Working Hours: Mon – Fri; 8am - 5.30pm

- Location: Airport Road

- Permanent

- Salary: Up to $7000 + VB

Key Job Accountabilities:

1. Process / Product Type

• In-charge of at least two repair processes and two product type
• Troubleshoot process issues
• Resolve daily production issues
• Technical Queries to OEM or Customer
• Assist in process investigation
• Writing worksheets for piece job pertaining to assigned process
• Generate process and qualify parameters
• Process improvements
• Cost Savings
• Basic trending for process parameters
• In charge of product type and rotate
• Link up with Authorities on matters pertaining to processes

2. Cap Setup

• To do First Article on new ESM repair procedures, SBs
• To do Capability Setup on new equipment or processes
• Design and RFQ for new fixtures/Jigs
• Carry out Tooling Review and Control
• Do submission for capability declaration

3. Documentation

• Publication Review (ESM, SB, ADs, TR, IC,) including process specification (AMS, ASTM, BS)
• Worksheet amendments
• In-house specifications amendments
• Publication Review (ESM, SB, ADs, TR, IC,)
• Review Manual updates
• Prepare FMM for machine
• Prepare Aviation HIRA for processes

4. Operation Support

• Provide Tech support to Operation
• Raise TVR, CDR for engine repair
• Raise TM, EB, EN,
• Attend, resolve and smoothened operations flow
• Review, investigate and provide solutions to Open Reporting issues raised by operation.

5. Investigation

• Assist in Investigation of engine component issues
• Carry out root cause analysis, provide recommendations for corrective and preventive
measures
• Follow up on investigation details and ensure no re-occurrence

6. Troubleshooting

• Resolve repair processes issues

7. Training

• Carry out training on repair processes and associated Standard practices

• Carry out training for first article processes

Salary:

• Up to $7000 + VB

Working Hours:

• Working Hours: Mon – Fri; 8am - 5.30pm

Period:

• 1 Year Renewable Contract

Location:

• Airport Road

Requirements:

• Degree in Mechanical, Aerospace or Aeronautical Engineering
• Have undergone at least 2 – 3 years of the on-the-job training
• 5 years working experience in Propulsion Engines and Components MRO Environment
• Strong Fundamentals in Engineering Drawing interpretations
• Understanding of Repair Processes is an added advantage
• Regulatory NDT requirements
• FAA 45 /EASA 145 regulations
• Strong analytical and communication skills
• Strong Interpersonal Skills
• Demonstrate high degree of initiative

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Registration no: R1549023)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Resource Centre Pte Ltd (EA License Number: 04C3201)
160 Robinson Road, #13-07/08/09 SBF Center, Singapore 068914

T: 6337 3183 | W: www.successhrc.com.sg

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Technical support for Protection Projects/Services

Handling testing and commissioning activities at site

Perform wiring check in workshop and at site

Project Management

Requirements:

Diploma in Electrical/Electronic Engineering from a recognised Polytechnic

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Employer Background:
The employer is a prominent player in the precision engineering sector, specializing in the manufacturing of high-quality metal components. They are known for their advanced engineering capabilities and commitment to delivering tailored solutions to meet customer needs.

Overview:
Join a dedicated team as a Design Engineer, where you will contribute to the design and development of precision engineering solutions, focusing on automation systems and custom fixtures.

• Position: Design Engineer
• Industry: Precision Engineering
• Department: Design and Engineering
• Employment Type: Full-Time
• Working Days & Hours: 5 Days, Monday to Friday, 9:00 AM to 6:10 PM
• Work Location: Within Central Location at Macpherson
• Salary Range: Up to $4,500 Monthly Basic (Based on Relevant Experience)

Job Responsibilities:

• Create schematic diagrams and manufacturing drawings for automation systems and jigs & fixtures, utilizing AutoCAD and/or SolidWorks.
• Collaborate closely with engineers and coordinate with customers to ensure that manufacturing drawings meet specifications and requirements.
• Assist in the design and engineering process to enhance manufacturing efficiency and product quality.

Requirements:

• Experience: Minimum 1 year of relevant working experience, preferably in the manufacturing automation or jig & fixture industry. Entry-level candidates are welcome to apply; training will be provided.
• Education: Minimum educational qualification: Nitec / Higher Nitec / Diploma / Degree in Engineering (Any Major).

Recruit Lync Pte Ltd | EA License Number: 22C1000
Poon Weng Teik (Wilson) | EA Personnel License: R1657737

• • Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role
• Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• • Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• • Full training provided
• 
  
• 
  
• Responsibilities:
• Technical support for Protection Projects/Services
• Handling testing and commissioning activities at site
• Perform wiring check in workshop and at site
• Project Management
• Requirements:
• Diploma in Electrical/Electronic Engineering from a recognised Polytechnic
• 
  
• Our benefits and compensation for permanent position are as follows:
• 
  
• Salary for experience candidates will be considered based on the years of experience and our internal salary structure
• 
  
• 1 month AWS
• Variable Bonus ranging from 1 to 6 months depending on individual and company performance
• Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm
• Working days: Monday to Friday (1 day work from home per week)
• Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)
• 18 days up to 21 days for executive (Engineer and above)
• Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)
• Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)
• Term Life
• Personal Accident
• Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.
• Flex Dollars of $500 per financial year
• Free annual year-end Health Check-Up
• Monthly Birthday Party Celebration
• Monthly Sports Activities
• New Born Gift
• CSR Initiatives
• Department Bonding Activities
• Biennial team building and staff appreciation dinner
• Gym Corner for employees to exercise
• 
  
• Good Pay + Good allowance + Good Bonus
• Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)
• Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )
• 
  
• 
  

At Temasek Laboratories@NTU, our mission is to undertake cutting-edge research in defence science and technology, driving new solutions and advancements across various research areas, including Microsystems Technology, Hardware Assurance, Signal Processing, Advanced Materials, Advanced Laser Technology, and Emerging Technologies.

Microsystems Technology Development Centre (MTDC) at TL@NTU is having ISO certified III-V Wafer Fabrication Line up to 100-mm diameter wafers with strong industrial/academic experienced Technical Specialists/ Engineers/ Scientists. We are a fast-paced research facility that designs, develops, and manufactures integrated chips, i.e. heterogeneous system in package modules, for defence and commercial applications.

We are looking for a hands-on Thin Film engineer who demonstrates a positive attitude, collaborates well in a team, and possesses strong technical abilities along with sound problem-solving skills.

Key Responsibilities:

• Work with the module leader and execute the design of experiment (DOE) using advanced techniques such as sputtering, evaporation, and chemical vapor deposition (e.g. SiO2, SiON, TaN, Au, Ti, Al, Ni, Pt and etc.).
• Develop and optimize deposition parameters to achieve precise film thickness, uniformity, and quality.
• Help to identify and troubleshoot process issues, working towards yield enhancement and performance improvement.
• Utilize a range of characterization techniques, including optical microscopes, surface profiler, SEM, Ellipsometer to analyze thin film properties.
• Maintain detailed documentation of processes such as standard operating procedure (SOP), experimental setups, and results for future reference and knowledge transfer and including training.
• Oversee the operation of laboratory equipment and ensure proper functioning. Work with the equipment vendor to conduct routine maintenance, troubleshooting, and calibration of equipment to minimize downtime.
• Work with the University’s procurement team to source and acquire necessary equipment. Evaluate and select vendors, ensuring equipment aligns with research requirements and budget constraints.
• Adhere to laboratory safety protocols and ensure compliance with University and regulatory standards.
• Collaborate with different modules and team members.
• Communicate effectively with team members, providing updates on processes and status of equipment.

Job Requirements:

• Diploma in Engineering (e.g. Microelectronics, Electrical & Electronics Engineering, Material Engineering) with 3 years of relevant working experience or Bachelor’s degree in any Engineering (e.g. Microelectronics, Electrical & Electronics Engineering, Material Engineering).
• Hands-on working experience in semiconductor fab/cleanroom environment in Thin Film area preferred (e.g. SiN, SiO2, TaN, Al, Au, Ti, Ni, Pt and etc.).
• Ability to create and analyze DOE for Thin Film process.
• Experience in wet bench processes, especially the lift-off technique, is essential.
• Basic knowledge in semiconductor fabrication process and device physics.
• Strong understanding of thin film materials and their properties, with expertise in process optimization and troubleshooting.
• Excellent problem-solving skills and ability to work effectively in a collaborative team environment.
• Strong communication skills, with the ability to convey complex technical concepts clearly and concisely.
• Commitment to maintaining high standards of safety, quality, and professionalism in all aspects of work.

We regret to inform that only shortlisted candidates will be notified.

• Position: Sales Engineer
• Location: Gul Crescent (West Singapore)
• Working Hours: 8.15am - 5.30pm
• Working Days: 5 Days [Monday - Friday]
• Basic Salary: $3,000 - $4,000 + $1,020 (Car Allowance)+ $70 (Phone Allowance)
• Annual Sales Target & Bonus

The role is to market a full range of Professional & Industrial Cleaning equipment, and accessories & tools, to corporate customers, with an emphasis in oil and gas sectors. [ Water Jetting & Industrial Cleaning]

Responsibilities:

• Serve existing assigned accounts and prospect potential new customers
• Learn & familiarize our products well, understand users’ needs, and so be able to offer solutions and assistance to meet their requirements
• Perform hands-on product demonstrations, as well as occasionally conduct presentations to mid-size audiences including management levels

Requirement

• Polytechnic Diploma or equivalent; preferably in a business associated or engineering related field
• Experienced in corporate/industrial sales, especially in the oil and gas setting
• Preferably hold a Class 3 driving license and own a car

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Perform inspections and tests on electrical and instrumentation systems, including cables, panels, field instruments, and control systems.
• Ensure installations and testing comply with approved drawings, project specifications, and relevant standards
• Prepare and review Inspection and Test Plans (ITPs), Method Statements, and Quality Control procedures.
• Maintain quality records, such as test reports, calibration certificates, and inspection checklists.
• Liaise with construction team, subcontractors, and corporate QMS department to address quality-related issues
• Support commissioning activities by ensuring all quality requirements are met before system handover
• Ensure compliance with industry standards, local regulations, and safety requirements
• Any other duties to be assigned from time to time

Pre-requsities

• Degree/Diploma in Electrical Engineering or related field
• Minimum 5 years of experience in power or industrial plant construction projects
• In-depth knowledge of electrical systems for critical equipments in power plant construction
• Proficiency in inspection and testing of electrical and instrumentation systems
• Effective communication and interpersonal skills for collaboration with multidisciplinary teams
• Commitment to safety and compliance with regulatory requirements
• Project location: Jurong Island (Transport provided at designated pick-up points)

Highlights:

• Fortune 100 MNC
• Permanent job opportunity
• Great remuneration & benefits
• Great career progression
• Location: Suntec City

Responsibilities:

• Performing computer simulations-based analysis using commercial FEA software, CFD software or other similar analysis tools.
• Refine simulation models to improve accuracy of predictions. This will involve activities such as refining model inputs (e.g. materials data, machining data), grid sensitivity studies, exploring efficacy of different solvers, etc.
• Participating in technical problem-solving activities with the wider team for issues in product development
• Contributing improvements to manufacturing processes.
• Create new IPs in Singapore in area of expertise.
• Planning your own work and taking responsibility for project delivery.
• Create clear technical reports and presenting to others within the cross-functional team.
• Overseas process development support for short term assignments.

Requirements:

• Masters/PhD in Mechanical or relevant engineering Majors
• FEA software application: ANSYS Mechanical, ANSYS Fluent, ABAQUS, LS-DYNA, other simulation software
• Prefer to have at least 2 years of relevant working experience in structural, heat transfer or fluid dynamics simulation.
• Good to have knowledge in product design or manufacturing process development.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email to [email protected] with provided your latest resume in MS WORD format with below information.

• Last drawn salary
• Expected salary
• Notice period
• Reason for leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the

Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Vivian Chung Fhui Tiin

EA Personnel Reg No: R22106436

About SHOKZ

As the first bone conduction headset manufacturer in China, Shokz pioneered the foray into patented bone conduction technology and has built itself as a world-renowned headphone brand with its signature open-ear design. Utilising numerous patented acoustics and health technologie, Shokz aims to accelerate the development of their True Wireless Stereo series, their bone-conduction hearing aid and health product line.

Job Description：

Here, we explore the art of interaction between circuits and human body together. From the collection, processing to transmission of physiological signals, we listen to th body‘s whispers; from the design of status monitoring modules to the analysis of human body composition and signal quality, we objectively record the changes. We are the front-end of signal processing, the foundation of function realization, and the determinant of product ceiling!

Job Scope：

1. Conduct research on algorithms applied to wearable devices, explore algorithms for physiological signal processing, analysis, action classification, and recognition.

2. Implement the hardware platform to enhance the functionality, performance, and reliability of the algorithms.

3. Apply algorithms to products to amplify product advantages and enhance user experience.

Job Requirement:

1. Majors in Electronic Engineering, Electronic Information, Microelectronics, Automation,Biomedical Engineering, Optoelectronic Information Science and Engineering, Signal and Information Processing, Medical Information Engineering, or related fields.

2. Possess a focused mindset, a curiosity to explore the nature of things, and a pursuit of technological excellence.

3. Have clear logic and be able to swiftly keep up with the latest scientific research results.

4. Passionate about scientific research, committed to the commercialization of research outcomes, and enthusiastic about marketing them globally.

5. Prior experience in signal processing, mathematical modeling competitions, or acoustic projects is preferred.

This role offers the opportunity to work on cutting-edge ML technologies and contribute to transformative business solutions in a dynamic and collaborative environment.

Job Responsibilities:

• Design, develop, and optimize machine learning (ML) models and algorithms to address business challenges.
• Collaborate with cross-functional teams to gather requirements, define objectives, and deploy models effectively.
• Train and fine-tune ML models using appropriate algorithms, techniques, and tools.
• Conduct evaluations to assess model performance, applying methods such as cross-validation, hyperparameter tuning, and ensemble learning.
• Work closely with software engineers and DevOps teams to deploy models in production environments.
• Implement APIs and integrate models into existing systems to enable real-time decision-making.
• Monitor deployed models to ensure optimal performance, address anomalies, and resolve issues.
• Continuously refine models and algorithms based on user feedback and performance metrics.
• Perform exploratory data analysis to uncover trends and insights.
• Use statistical methods and visualization techniques to communicate findings to stakeholders.
• Stay updated on advancements in ML and artificial intelligence (AI).
• Evaluate and recommend new tools, libraries, and methodologies to enhance workflows.

Job Requirements:

• Min. Bachelor degree in Computer Science, Data Science, Machine Learning, or a related field.
• At least 4 years of hands-on experience in designing, developing, and deploying ML models for real-world applications.
• Familiarity with Large Language Models and Generative AI technologies is a plus.
• Proficiency in Python and ML frameworks such as TensorFlow, PyTorch, or Scikit-learn.
• Strong understanding of statistical analysis, probability theory, and hypothesis testing.
• Experience with cloud-based ML tools (e.g., AWS, Azure, GCP) and distributed computing frameworks (e.g., Spark) is advantageous.
• Excellent communication skills to articulate technical concepts to diverse stakeholders.

Your recruiter for this job: WhatsApp Celine @ 6421 4966 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Celine Chan | R21103433

Talentsis Pte Ltd | EA No: 20C0312

Description

We are seeking for Engineers to join a leading HVAC equipment manufacturer with over 30 years of industry presence in Singapore.

Location: Kembangan
Working hours: Mon to Fri, 8am to 5pm & Sat, 8am to 3pm
Salary: Basic $2800 to $4500, depending on experience

Job scope:
- Work closely with the team to manufacture industrial chillers, including refrigeration system assembly, electrical wiring, and temperature control setup.
- Assess the final product's performance, reliability, and safety.
- Perform diagnosis, testing, repair, and overhaul of mechanical, electrical, and electronic components of chillers.
- Deliver and install chillers and components at customer sites.

Requirements:
- Min. NITEC / Diploma in any relevant Engineering discipline
- Able to use AutoCAD to create 2D drawings
- Class 3 license would be advantageous

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

We are the TikTok R&D team responsible for the construction of TikTok's global Customer Service Platform, which includes various services for both B-end and C-end. We are also responsible for understanding user feedback content, including identifying user intentions, and applying large language models such as ChatGPT in intelligent conversations.

The role will be responsible for

- the design and development of the TikTok customer service platform

- deeply understand the business, provide users with intelligent and efficient service solutions through abstraction

- reasonably decompose and implement product requirements of different periods and urgency levels

- write technical documents and design plans for related products

- learn and research advanced technologies in the industry to maintain technological progress

Qualifications

Minimum Qualifications

- Proficient in at least one programming language, such as Java, Golang, Python, or C++

- Bachelor Degree in Computer Science or related field

Preferred Qualifications

- Candidates with Java or Golang experience are preferred;

- Familiar with common Internet technologies, including but not limited to Linux systems and principles, MySQL, RPC, MQ, caching technologies, and microservices architectures;

- Possess good coding and documentation habits, pay attention to code style, familiar with basic design patterns and principles, and continuously focus and optimize projects

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

• Plan, execute, and monitor technical aspects of projects.
• Manage or support system/network setup and upgrades.
• Ensure operational systems meet Service Level Agreements.
• Perform routine maintenance and operational tasks. Provide project documentation and reports.
• Diagnose and resolve technical issues.

Requirements:

• Experience with Windows Server OS, Unix/Linux OS, and VM environments.
• Knowledge of Microsoft SQL Server is a plus.
• Familiarity with VPN, firewall appliances, and Cisco routers/switches.
• Strong communication skills for technical and non-technical audiences.Proactive, dynamic, and analytical

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.